Bitte nicht schlagen, schon wieder jemand mit 'ner Sagem und seinen Problemen.
Hier meins...
Mit der BetaNova-Soft funktioniert sie wunderbar, was das halt damit heißt. Gähhn!!
Die Box ist auf Linux umgerüstet und ich hab mir das aktuelle KEYWELT_V8_August_1x_SQUASHFS_2005 Image draufgeladen.
Es hat mir auch wunderbar gefallen, nur als ich umgeschalten habe kam bei ZDF "Kanal nicht verfügbar" Nach einigen Änderungen kam die Meldung dort nur noch sporadisch (ohne nachvollziehbares Muster). Sie blieb jedoch bei Sat1 und co.
Kann mir jemand helfen wie auch bei Linux die Box anständig fonktioniert?
Sie lässt mich auch nicht per FTP auf sich zugreifen. (ftp://root:dbox2@169.254.50.202)
Danke!!!!
Das Flash-Log sieht folgendermaßen aus:
Ædebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID http://Hallenberg.com
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 169.254.50.254, My IP 169.254.50.202
debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 140592
verify sig: 263
boot net: boot file has no valid signature
Branching to 0x40000
U-Boot 1.1.2 (Tuxbox) (Mar 28 2005 - 13:54:32)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 169.254.50.254; our IP address is 169.254.50.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *_Using SCC ETHERNET device
TFTP from server 169.254.50.254; our IP address is 169.254.50.202
Filename '/tftpboot/logo-lcd'.
Load address: 0x100000
Loading: *_##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 169.254.50.254; our IP address is 169.254.50.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *_Using SCC ETHERNET device
TFTP from server 169.254.50.254; our IP address is 169.254.50.202
Filename '/tftpboot/logo-fb'.
Load address: 0x100000
Loading: *_####################################
done
Bytes transferred = 179877 (2bea5 hex)
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Bank # 1: INTEL 28F640J3A (64M), 16 bit
Size: 8192 kB in 64 Sectors
Sector Start Addresses:
10000000 10020000 10040000 10060000
10080000 100A0000 100C0000 100E0000
10100000 10120000 10140000 10160000
10180000 101A0000 101C0000 101E0000
10200000 10220000 10240000 10260000
10280000 102A0000 102C0000 102E0000
10300000 10320000 10340000 10360000
10380000 103A0000 103C0000 103E0000
10400000 10420000 10440000 10460000
10480000 104A0000 104C0000 104E0000
10500000 10520000 10540000 10560000
10580000 105A0000 105C0000 105E0000
10600000 10620000 10640000 10660000
10680000 106A0000 106C0000 106E0000
10700000 10720000 10740000 10760000
10780000 107A0000 107C0000 107E0000
Bank # 2: missing or unknown FLASH type
Using SCC ETHERNET device
TFTP from server 169.254.50.254; our IP address is 169.254.50.202
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: *_#################################################################
#################################################################
####################
done
Bytes transferred = 763552 (ba6a0 hex)
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 763488 Bytes = 745.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
init started: BusyBox v0.60.2 (2002.02.26-14:29+0000) multi-call
dbox2miniroot zum Flashen
- Hallenberg.com -
Wilkommen auf ihrer dbox2
Der Flashprozess wird nun gestartet...
Erasing blocks: 63/63 (100%)
Writing data: 8064k/8064k (100%)
Verifying data: 8064k/8064k (100%)
Flashen abgeschlossen.
Sie können die dbox jetzt ausschalten.
Please press Enter to activate this console.
------ Zusatzinformationen ------
Gewählter Netzwerkadapter: Realtek RTL8169/8110 Family Gigabit Ethernet NIC - Paketplaner-Miniport (0)
IP-Adresse des Netzwerkadapters: 169.254.50.254
IP-Adresse die die dbox bekommt: 169.254.50.202
Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
DBOX-IFA Version: 1.7.0.2
Dateiname des Images: BetaNova - Nico.img
Imagetyp: Zwei Flashs
------ Powered by http://www.dboxservice-hallenberg.de ------