Jump to content

dirkschulze5

Full Member
  • Gesamte Inhalte

    15
  • Benutzer seit

Alle erstellten Inhalte von dirkschulze5

  1. @ snowhead Danke für den Tipp. Box läuft wieder, ich habe einen anderen pC genommen und alles ging wie von selbst.
  2. Werde Morgen mal einen anderen PC probieren. Pr### kratzt mich nicht bin kein Kunde bei den Laden
  3. @snowhead WIE? dsID immer überschreiben!
  4. @snowhead Flashassi gibt folgendes von sich, sonst kommt nichts!!!!! BOOTP broadcast 140 TFTP from server 192.168.123.200; our IP address is 192.168.123.202 Filename 'C/tftpboot/logo-lcd'. Load address: 0x130000 Loading: *## done LCD logo at: 0x130000 (0x1FE13C8 bytes) No FB Logo in Flash , trying tftp BOOTP broadcast 1 TFTP from server 192.168.123.200; our IP address is 192.168.123.202 Filename 'C/tftpboot/logo-fb'. Load address: 0x120000 Loading: *#################################### done FB logo at: 0x0 (0x1FE13C8 bytes) AVIA Frambuffer Input: serial Output: serial Images: 1: cdk 2: tiab 3: flash 4: test2 Select image (1-4), other keys to stop autoboot: 1 0 ............................................................... Un-Protected 63 sectors BOOTP broadcast 1 TFTP from server 192.168.123.200; our IP address is 192.168.123.202 Filename 'C/tftpboot/kernel-cdk'. Load address: 0x100000 Loading: *T T T T T T T T T Retry count exceeded; starting again ÿdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID dd gtxID 0b debug: fpID 5a dsID Edit SnowHead: dsID immer überschreiben! debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP redebug: Got Block #0350 will verify ELF image, start= 0x800000, size= 201596 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 ppcboot 0.6.4 (Apr 11 2002 - 16:10:44) Initializing... CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: ### No HW ID - assuming TQM8xxL DRAM: (faked) 32 MB Ethernet: 00-50-9c-1b-5f-28 FLASH: 8 MB LCD driver (KS0713) initialized BOOTP broadcast 1 TFTP from server 192.168.123.200; our IP address is 192.168.123.202 Filename 'C/tftpboot/logo-lcd'. Load address: 0x130000 Loading: *## done LCD logo at: 0x130000 (0x1F9FFC0 bytes) BOOTP broadcast 1 TFTP from server 192.168.123.200; our IP address is 192.168.123.202 Filename 'C/tftpboot/logo-fb'. Load address: 0x120000 Loading: *#################################### done FB logo at: 0x0 (0x1FC0000 bytes) AVIA Frambuffer Input: serial Output: serial Select (1-3), other keys to stop autoboot: 0 'bootd' recursion detected dbox2-ppcboot> bootp 120000 /tftpboot/flash.img BOOTP broadcast 1 TFTP from server 192.168.123.200; our IP address is 192.168.123.202 Filen########################################################################### ################################################################################ # ################################################################################ # ################################################################################ # ################################################################################ # ################################################################################ # ################################################################################ # ################################################################################ # ################################################################################ # ################################################################################ # ################################################################################ # ################################################################################ # ################################################################################ # ################################################################################ # ################################################################################ # ################################################################################ # ################################################################################ # ################################################################################ # ################################################################################ # ############################### done dbox2-ppcboot> protect off 10020000 107FFFFF ............................................................... Un-Protected 63 sectors dbox
  5. @ snowhead bin ein bischen weiter gekommen aber nocht nicht zu Erfolg, bekomme jetzt folgende Meldung TFTP from server 192.168.123.200; our IP address is 192.168.123.202 Filename 'C/tftpboot/logo-lcd'. Load address: 0x130000 Loading: T T T T T T T T T Retry count exceeded; starting again BOOTP broadcast 48 TFTP from server 192.168.123.200; our IP address is 192.168.123.202 Filename 'C/tftpboot/logo-lcd'. Load address: 0x130000 Loading: T T T T T T T T T Retry count exceeded; starting again BOOTP broadcast 49 TFTP from server 192.168.123.200; our IP address is 192.168.123.202 Filename 'C/tftpboot/logo-lcd'. Load address: 0x130000 Loading: T T T T T T T T T Retry count exceeded; starting again
  6. @ snowhead am PC Netzkarte ist am blinken, sehe auch am Switch das beide Lampchen blinken also irgend etwas produziert Traffic. Werde heute Abend mal Netzkarte tauschen, melde mich dann noch einmal.
  7. @ snowhead Karte arbeitet in beiden 10/100. Werde heute mal alles deinstal. u. den Treiber neu oder mal eine andere Karte probieren. Kann es sein das der Boxanschluss-Nert nicht i.O. ist oder liegt es nur an der Karte im PC. Welchen Tipp kannst Du mir noch geben. Gruß Dirk
  8. **Adapter Desc: NDIS 5.0 driver (via IpHlpApi #1) ***MAC address: 00:50:BF:D0:9C:9B Local IP: 192.168.123.200 ***BootP server started... Port 67 ***TFTP server started... Port 69
  9. z.Z. habe ich eine Switch dazwischen geschaltet 10MB Half und Null Modem Kabel, habe auch schon die Variante Cross u. Null ModemKabel versucht ohne Erfolg und wie gesagt Fire u. Virus aus.
  10. Das selbe Problem! Komme nicht an die Box BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed boot: elfcopy failed: 16
  11. Bekomme jetzt folgenden Fehler: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed boot: elfcopy failed: 16 dbox2:root> Was kann ich noch einstellen? Habe Firewall u. Virus aus. Wie ist den die IP vom März Image?
  12. Hallo Leute, brauche dringend HILFE, habe gerade versucht zu Flashen und bekomme folgende Meldung debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID dd gtxID 0b debug: hffhgj dsID Edit SnowHead dsID immer überschreiben! debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0032 will verify ELF image, start= 0x800000, size= 153208 verify sig: 263 Branching to 0x40000 U-Boot 1.1.1 (TuxBox) (Dec 15 2004 - 20:25:40) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: .. done. find_inode failed for name=tuxbox load: Failed to find inode FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET find_inode failed for name=tuxbox load: Failed to find inode ready - can't find logo in flash find_inode failed for name=tuxbox load: Failed to find inode can't find logo in flash Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (jffs2) loading 'vmlinuz' to 0x100000 Scanning JFFS2 FS: . done. ### FS load complete: 623681 bytes loaded to 0x100000 ............................................................... Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 623617 Bytes = 609 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.27-dbox2 (root@dbox) (gcc version 3.3.5) #62 Mi Dez 15 20:27:1 1 CET 2004 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/mtdblock3 rootfstype=squashfs Decrementer Frequency = 252000000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0) Console: colour dummy device 80x25 Calibrating delay loop... 66.96 BogoMIPS Memory: 30880k available (1060k kernel code, 368k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. © 2001-2003 Red Hat, Inc. i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1b:5f:28 D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode Intel/Sharp Extended Query Table at 0x0035 cfi_cmdset_0001: Erase suspend on write enabled Using word write method Creating 7 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "flfs (u-boot)" 0x00040000-0x000e0000 : "kernel (jffs2)" 0x000e0000-0x005a0000 : "root (squashfs)" 0x005a0000-0x00800000 : "var (jffs2)" 0x00020000-0x00800000 : "flash without bootloader" 0x00000000-0x00800000 : "complete flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Kernel panic: VFS: Unable to mount root fs on 1f:03 <0>Rebooting in 180 seconds..debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.0 mID 01 debug: feID dd gtxID 0b debug: gdrhfdshj debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0032 will verify ELF image, start= 0x800000, size= 153208 verify sig: 263 Branching to 0x40000 U-Boot 1.1.1 (TuxBox) (Dec 15 2004 - 20:25:40) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: .. done. find_inode failed for name=tuxbox load: Failed to find inode FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET find_inode failed for name=tuxbox load: Failed to find inode ready - can't find logo in flash find_inode failed for name=tuxbox load: Failed to find inode can't find logo in flash Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (jffs2) loading 'vmlinuz' to 0x100000 Scanning JFFS2 FS: . done. ### FS load complete: 623681 bytes loaded to 0x100000 ............................................................... Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 623617 Bytes = 609 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.27-dbox2 (root@dbox) (gcc version 3.3.5) #62 Mi Dez 15 20:27:1 1 CET 2004 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/mtdblock3 rootfstype=squashfs Decrementer Frequency = 252000000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0) Console: colour dummy device 80x25 Calibrating delay loop... 66.96 BogoMIPS Memory: 30880k available (1060k kernel code, 368k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. © 2001-2003 Red Hat, Inc. i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1b:5f:28 D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode Intel/Sharp Extended Query Table at 0x0035 cfi_cmdset_0001: Erase suspend on write enabled Using word write method Creating 7 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "flfs (u-boot)" 0x00040000-0x000e0000 : "kernel (jffs2)" 0x000e0000-0x005a0000 : "root (squashfs)" 0x005a0000-0x00800000 : "var (jffs2)" 0x00020000-0x00800000 : "flash without bootloader" 0x00000000-0x00800000 : "complete flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Kernel panic: VFS: Unable to mount root fs on 1f:03 An der Box steht Lade kernel und bleibt stehen!!
  13. Echt Klasse die schnellen Antworten!! Ich klicke mich gerade ein wenig durch die einzelnen Beitäge und lese viel über das Update K** usw. über Internet. Vielleicht kann mir einer meine Frage beantworten. Meine Box hängt nicht direkt am Internet ich müßte über Laptop und Crosskabel dann ins Internet, würde dann ein Update funktionieren oder werde ich Probleme bekommen?
  14. Hallo, was beinhaltet das März Image und gibt es große Unterschiede zum Nais
  15. dirkschulze5

    Image

    Hallo Leute, ich habe eine DBox2 mit NaisImage 15.12., ich würde gerne mal ein anderes probieren! Welches könnt Ihr empfehlen?
×
×
  • Neu erstellen...