So weil ich ja nich so bin und`s mir selber keine ruhe lies. Jetzt nochmals nach 1,5 Stunden testen und unzähligen abstürzen. bis ich jetzt ein Image hab was maximal 15 minuten läuft. (ich könnt .....)
nun ein paar fakten, mir das zunächst wohl wichtigste
ps ax ( nach 5 - 15 Minuten je nach zappen über 10 -15 Sender) (beim start natürlich mit 0Mb)
/var # ps ax
PID Uid VmSize Stat Command
1 root 572 S init
2 root SW [keventd]
3 root SWN [ksoftirqd_CPU0]
4 root SW [kswapd]
5 root SW [bdflush]
6 root SW [kupdated]
7 root SW [mtdblockd]
12 root SWN [jffs2_gcd_mtd2]
51 root 636 S inetd
64 root SW [avia_av_wdt]
68 root SW [avia_gt_wdt]
100 root SW [cifsoplockd]
104 root 548 S /bin/sh /etc/init.d/start
105 root 572 S init
106 root 572 S init
107 root 572 S init
108 root 572 S init
110 root 572 S init
111 root 572 S init
113 root 540 S /bin/sh /var/etc/init.d/start_neutrino
115 root 8496 S < sectionsd
117 root 8496 S < sectionsd
118 root 8496 S < sectionsd
119 root 8496 S < sectionsd
120 root 8496 S < sectionsd
121 root 8496 S < sectionsd
122 root 1188 S timerd
123 root 1188 S timerd
127 root 1188 S timerd
134 root 936 S camd3xx
137 root SW [kdvb-fe-0:0]
138 root 936 S camd3xx
139 root 936 S camd3xx
140 root 936 S camd3xx
141 root 936 S camd3xx
142 root 936 S camd3xx
143 root 936 S camd3xx
144 root 1868 S zapit -u
146 root 1236 S controld
148 root 1236 S controld
149 root 1236 S controld
150 root 1824 S nhttpd
154 root 3524 S neutrino -u -f
155 root 3524 S neutrino -u -f
156 root 3524 S neutrino -u -f
157 root 3524 S neutrino -u -f
164 root 436 S telnetd
165 root 704 S -sh
274 nobody 692 S in.ftpd
276 root 736 S in.ftpd
339 root 656 R ps ax
/var # free
total used free shared buffers
Mem: 30900 28552 2348 0 3364
Swap: 0 0 0
Total: 30900 28552 2348
dann wenn ich schon eine preinstallationsboot geschichte einbau.
Wieso löscht der und warum keine ip und wieso so mnt leichen(verlängert das booten ungemein)
hier der log
will verify ELF image, start= 0x800000, size= 160940
verify sig: 263
Branching to 0x40000
U-Boot 1.1.2 (Tuxbox) (Jul 17 2005 - 16:59:14)
CPU: PPC823ZTnnB2 at 65.900 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Philips, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ... done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 658104 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 658040 Bytes = 642.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.31-dbox2 (image@Tower) (gcc version 3.3.5) #2 So Jul 17 17:41:
16 CEST 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 247125000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30840k available (1124k kernel code, 344k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2,
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00540000 : "root (squashfs)"
0x00540000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.00 (2005.07.17-15:22+0000) multi-call brm: cannot remo <---- Hmmmm???
ve `/var/etc/.A500*': No such file or directory <----
rm: cannot remove `/var/etc/.A600*': No such file or directory <----
Using /lib/modules/2.4.31-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.31-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.31-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.31-dbox2/misc/avs.o
Using /lib/modules/2.4.31-dbox2/misc/saa7126.o
Detected STB:
Vendor: Philips
Model: D-BOX2
Using /lib/modules/2.4.31-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.31-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.31-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.31-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_napi.o
KEYWELT Pre-Configuration
Using /lib/modules/2.4.31-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_av_core: Starting avia_gt_wdt thread.
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.31-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/tda8044h.o
DVB: registering frontend 0:0 (TDA8044H QPSK Demodulator)...
Using /lib/modules/2.4.31-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Using /lib/modules/2.4.31-dbox2/misc/dvb2eth.o
Using /lib/modules/2.4.31-dbox2/misc/aviaEXT.o
cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $
Using /lib/modules/2.4.31-dbox2/kernel/net/sunrpc/sunrpc.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/lockd/lockd.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/nfs/nfs.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/cifs/cifs.o
Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.184 2005/05/
02 19:06:35 rasc Exp $
caching 504 hours
events are old 180min after their end time
Using /var/modules/multicam.o
insmod: Warning: kernel-module version mismatch <----
/var/modules/multicam.o was compiled for kernel version 2.4.25-dbox2 <----
while this kernel is version 2.4.31-dbox2 <---- Mit -f geht alles (unsauber
DBox2 Multicam Driver v1.01 skars & doz21 :)
Multicam-Treiber erfolgreich geladen
Starte camd3xx
[camd]: Slot0: deaktiviert
[camd]: Slot1: aktiviert
[camd]: Slot2: aktiviert <----????Dbox nicht dream!
[camd]: Slot3: aktiviert
[camd]: Slot1: AU shared
[camd]: Slot3: AU all
[camd]: OSD aktiviert
[camd]: DEBUG aktiviert (mit Verbindungsinformationen)
[camd]: benutze /dev/dvb/adapter0/ca1
[camd]: UserDB: #0 Users gefunden -> CS-Server deaktiviert
[camd]: ServerDB: #0 Servers gefunden -> CS-Client deaktiviert
$Id: zapit.cpp,v 1.373 2005/07/02 13:44:33 barf Exp $
[zapit] PMT update enabled
[camd]: KeyDB: gestartet
[camd]: Slot1: initialisiere...
[camd]: Slot1: starte Monitor...
[camd]: Slot1: bereit
[camd]: Slot2: initialisiere...
[camd]: Slot3: initialisiere...
[camd]: Slot3: starte Monitor...
[camd]: Slot3: bereit
camd !!!STREAMBOARD!!! dbox2 v3.684b - erfolgreich gestartet
[getservices] dup transponder id 5 onid 85
[getservices] dup transponder id 1 onid 13E
[getservices] dup transponder id 13EF onid 13E
[getservices] dup transponder id 3D onid 13E
[getservices] dup transponder id 1 onid 1
[getservices] dup transponder id 65 onid 13E
[getservices] dup transponder id 1 onid 1
[getservices] dup transponder id C9 onid 6
[getservices] dup transponder id 2500 onid 1250
[getservices] dup transponder id 3CF0 onid 13E
[getservices] dup transponder id 3E1C onid 13E
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
[getservices] dup transponder id 457 onid 1
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $
[controld] Boxtype detected: (2, Philips D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[deutsch.locale] missing entry: fontsize.imageinfo_info
[deutsch.locale] missing entry: fontsize.imageinfo_small
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[CFSMounter] Mount(0) 192.168.69.4:Aufnahme -> /mnt/record <---- für was ???? hab ich doch garnicht!
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[CFSMounter] FS mount error: "mount -t nfs 192.168.69.4:Aufnahme /mnt/record -o <---- es dauert
rw,soft,udp,nolock,rsize=16384,wsize=32768"
[sectionsd] getUTC: read: Connection timed out
[neutrino] menue setup
loading locales: scandir: No such file or directory
mount: RPC: Unable to receive; errno = No route to host
mount: nfsmount failed: Bad file descriptor
nfs warning: mount version newer than kernel
RPC: sendmsg returned error 22
nfs: RPC call returned error 22
nfs_get_root: getattr error = 22
nfs_read_super: get root inode failed
mount: Mounting 192.168.69.4:Aufnahme on /mnt/record failed: Invalid argument
[neutrino] received 31 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
PES, queue 0 normal.
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
[timeThread] time(): 22.07.2005 19:30:34, tim: Fri Jul 22 19:30:34 2005
[timeThread] time(): 22.07.2005 19:30:41, tim: Fri Jul 22 19:30:41 2005
PES, queue 0 normal.
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
error while loading palette: /share/tuxbox/neutrino/icons/scan.pal
error while loading icon: /share/tuxbox/neutrino/icons/scan.raw
[zapit] scan mode full
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
tansponder 2fd600c004440001 not written
tansponder 30ad00c000050085 not written
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
[getservices] dup transponder id 457 onid 1
/var/tuxbox/config/zapit/bouquets.xml: No such file or directory
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
route: SIOC[ADD|DEL]RT: No such process
testNw IP : 192.168.1.6
testNw Netmask : 255.255.255.0
testNw Broadcast: 192.168.1.255
testNw Gateway: 192.168.1.101
testNw Nameserver: 192.168.1.101
[CPlugins] (id,val):(fd_lcd,20)
[CPlugins] (id,val):(rcblk_rep,180)
[CPlugins] (id,val):(rcblk_anf,100)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_framebuffer,3)
[CPlugins] try exec...
shellexec Version 1.66
<Font "/share/fonts/micron_bold.ttf" loaded>
starte pcamd -kill
[camd]: fahre runter...
[camd]: Slot1: schliesse...
[camd]: Slot1: warte auf Monitor...
[camd]: Slot1: geschlossen
[camd]: Slot2: schliesse...
[camd]: Slot2: geschlossen
[camd]: Slot3: schliesse...
[camd]: Slot3: warte auf Monitor...
[camd]: Slot3: geschlossen
[camd]: KeyDB: beendet
camd !!!STREAMBOARD!!! dbox2 v3.684b - erfolgreich beendet
Warte auf camd3xx (max. 5 seconds)
Entlade Multicam-Treiber
Using /var/modules/multicam.o
insmod: Warning: kernel-module version mismatch
/var/modules/multicam.o was compiled for kernel version 2.4.25-dbox2
while this kernel is version 2.4.31-dbox2
DBox2 Multicam Driver v1.01 skars & doz21 :)
Starte camd3xx
[camd]: Slot0: deaktiviert
[camd]: Slot1: aktiviert
[camd]: Slot2: aktiviert
[camd]: Slot3: aktiviert
[camd]: Slot1: AU all
[camd]: Slot3: AU all
[camd]: OSD aktiviert
[camd]: DEBUG aktiviert (mit Verbindungsinformationen)
[camd]: benutze /dev/dvb/adapter0/ca1
[camd]: UserDB: #0 Users gefunden -> CS-Server deaktiviert
[camd]: ServerDB: #0 Servers gefunden -> CS-Client deaktiviert
[camd]: KeyDB: gestartet
[camd]: Slot1: initialisiere...
Connecting to 127.0.0.1[127.0.0.1]:80
mylist 100% |*****************************| 0 --:-- ETA[
camd]: Slot1: starte Monitor...
[camd]: Slot1: bereit
[camd]: Slot2: initialisiere...
[camd]: Slot3: initialisiere...
[camd]: Slot3: starte Monitor...
[camd]: Slot3: bereit
camd !!!STREAMBOARD!!! dbox2 v3.684b - erfolgreich gestartet
mylist 100% |*****************************| 47699 --:-- ETA
Connecting to 127.0.0.1[127.0.0.1]:80
mych 100% |*****************************| 2 --:-- ETA
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
found channel number: 389
zapped to Das Erste
PES, queue 0 normal.
video: 0x65
teletext: 0x68
pcr: 0x65
audio 1: 0x66 (deu)
[sectionsd] readNbytes: received POLLERR
[CPlugins] exec done...
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[sectionsd] readNbytes: received POLLERR
error while loading icon: /share/tuxbox/neutrino/icons/shutdown.raw
error while loading palette: /share/tuxbox/neutrino/icons/shutdown.pal
starte pcamd -kill
[camd]: fahre runter...
[camd]: Slot1: schliesse...
[camd]: Slot1: warte auf Monitor...
[camd]: Slot1: geschlossen
[camd]: Slot2: schliesse...
[camd]: Slot2: geschlossen
[camd]: Slot3: schliesse...
[camd]: Slot3: warte auf Monitor...
[camd]: Slot3: geschlossen
[camd]: KeyDB: beendet
camd !!!STREAMBOARD!!! dbox2 v3.684b - erfolgreich beendet
Entlade Multicam-Treiber
zapit shot down :)
STV6412 found
SET VSW: 2 3
SET VSW: 1 2
Unmounting 'ramfs' on '/tmp'
umount: /tmp: Device or resource busy
Unmounting 'jffs2' on '/var'
umount: forced umount of /dev/mtdblock/2 failed!
Oops: umount failed :-( -- trying to remount readonly...
Ready to shutdown system...
The system is going down NOW !![nhttpd] stop requested......
Sending SIGKILL to all processes.
The system is halted. Press Reset or turn off power
die fehler zum schluss hab ich mir gespart zu kommentieren.
Bei dem log ist jetzt die box sauber nach der Installation runtergefahren aber auch nur weil ich zwischen den einzelnen knopfdrücken mir tierisch zeit lies. und konsequent die konfig fürs nötigste durchgezogen hab. dazu waren aber 3 mal mit dem Bootmanager Neuflashen angesagt. (Weils ja neutral sein soll)
Absturz schaut einfach so aus
avia_av_wdt_thread: video
decoding stopped ==> restart
avia_av_wdt_thread: audio decoding stopped ==> restart
PES, queue 0 normal.
[camd]: beendet ECM: caid 1762 pid 006d Status=0022
PES, queue 0 normal.
PES, queue 0 normal.
PES, queue 0 normal.
PES, queue 0 normal.
avia_av_wdt_thread: video decoding stopped ==> restart
PES, queue 0 normal.
PES, queue 0 normal.
PES, queue 0 normal.
avia_av_wdt_thread: video decoding stopped ==> restart
PES, queue 0 normal.
avia_av_wdt_thread: video decoding stopped ==> restart
PES, queue 0 normal.
PES, queue 0 normal.
PES, queue 0 normal.
PES, queue 0 normal.
avia_av_wdt_thread: video decoding stopped ==> restart
PES, queue 0 normal.
PES, queue 0 normal.
PES, queue 0 normal.
PES, queue 0 normal.
avia_av_wdt_thread: video decoding stopped ==> restart
[controld] VIDEO_EVENT_SIZE_CHANGED 704x576 (4:3 -> 4:3)
PES, queue 0 normal.
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
PES, queue 0 normal.
PES, queue 0 normal.
PES, queue 0 normal.
[CPlugins] (id,val):(fd_lcd,20)
[CPlugins] (id,val):(rcblk_rep,180)
[CPlugins] (id
,val):(rcblk_anf,100)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_
framebuffer,3)
[CPlugins] try exec...
shellexec Version 1.66
<Font "/share/fonts/mi
cron_bold.ttf" loaded>
[sectionsd] readNbytes: received POLLERR
[sectionsd] readNb
ytes: received POLLERR
[CPlugins] exec done...
PES, queue 0 normal.
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-08.15.47.11:-P
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0040
will verify ELF image, start= 0x800000, size= 160940
verify sig: 263
Branching to 0x40000
U-Boot 1.1.2 (Tuxbox) (Jul 17 2005 - 16:59:14)
CPU: PPC823ZTnnB2 at 65.900 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Philips, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ... done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
so hoffe jetzt einwenig mehr infos geliefert zu haben.
Aber ihr müsst verstehn das sowas ein tierisch ankotzt wenn man sich eigentlich guterster dinge drauf eingestellt hat (dauert normal ja auch nur ein paar Minuten zum einrichten) aber damit ists n graus.