ma_cst
-
Gesamte Inhalte
5 -
Benutzer seit
Inhaltstyp
Profile
Forum
Kalender
Downloads
Blogs
Galerie
Articles
Beiträge erstellt von ma_cst
-
-
Alles wird gut ...
Mit einem anderen USB-Stick konnte ich kernel.img und system.img flashen.
Nach dem Reboot der Coolie mit einem WLAN-Stick (Edimax 150Mbps nano USB Adapter) im USB-Port im FontPanel konnte ich die Netwerkkonfiguration durchführen (wlan0, WLAN-Name, Paaswort, dhcp ein). Nach dem Speichern der Einstellungen wurde sofort eine Netzwerkverbindung hergestellt. :D
-
Hallo.
Ich habe mal ein Bootlog erstellt bei angeschlossenem WLAN USB-Stick im FrontPanel.
Vielen Dank für eure schnellen Antworten und Tipps!!!!
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.07.22 18:28:50 =~=~=~=~=~=~=~=~=~=~=~=
[2h[61"p[m[44m[37m[1m[2J[1;1H[(B[)B[?3l[?9hÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º U-Boot 2009.03-svn1773 (Nov 02 2010 - 15:25:47) Coolstream HDx º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º Chipset information º
º Vendor: Conexant Type: CX2450x (Nevis) Revision: D0 Fuses: 7EFE6D24 º
º Option: 00010000 max. clock: 600 MHz Core voltage: high º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º Clock information º
º MPG0: 594.000 MHz MPG1: 594.000 MHz HD : 593.407 MHz AUD : 491.520 MHz º
º PLL0: 432.000 MHz PLL1: 594.000 MHz PLL2: 533.333 MHz º
º CPU : 594.000 MHz from PLL1 º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º Memory configuration º
º Start ³ End ³ Type ³ Description º
ºÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º 00000000 ³ 0FFFFFFF ³ RAM ³ System main memory bank #0 º
º 10000000 ³ 17FFFFFF ³ RAM ³ System main memory bank #1 º
º F0000000 ³ F1FFFFFF ³ FLASH ³ Spansion S29GL256P (256 Mbit / 16M x 16) º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º Serial number: 010-00006212 (0A-001844) º
º *** Warning - bad CRC, using default environment *** º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º Network configuration º
º MAC: Conexant VMAC rev. 07 address: 00-C5-5C-00-18-44 º
º PHY: IC Plus IP101 address: 09 º
Error: Bad gzipped data
Error: no valid bmp or bmp.gz image at f0060000
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Hit any key to stop autoboot: 1 0
## Booting kernel from Legacy Image at f0080000 ...
Image Name: Coolstream Kernel (compressed)
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2344340 Bytes = 2.2 MB
Load Address: 00048000
Entry Point: 00048000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Linux version 2.6.34.13-nevis (image@LAPTOP2) (gcc version 4.7.1 (crosstool-NG 1.16.0) ) #1 Tue Jan 1 01:59:46 CET 2013
CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv7), cr=00c5387f
CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
Machine: CoolStream HDx IRD
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536
Kernel command line: console=ttyRI0 mtdparts=cx2450xflash:384k(U-Boot)ro,128k(Splash),4096k(kernel),28160k(systemFS) root=mtd3 rootfstype=jffs2 rw mem=384M
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 384MB = 384MB total
Memory: 384928k/384928k available, 8288k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0x98800000 - 0xe0000000 (1144 MB)
lowmem : 0x80000000 - 0x98000000 ( 384 MB)
modules : 0x7e800000 - 0x80000000 ( 24 MB)
.init : 0x80048000 - 0x80063000 ( 108 kB)
.text : 0x80063000 - 0x8048c000 (4260 kB)
.data : 0x8048c000 - 0x804aeea0 ( 140 kB)
NR_IRQS:352
Console: colour dummy device 80x30
console [ttyRI0] enabled
Calibrating delay loop... 593.10 BogoMIPS (lpj=2965504)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.22.1.
cfg80211: Calling CRDA to update world regulatory domain
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NetWinder Floating Point Emulator V0.97 (double precision)
Installing knfsd (copyright © 1996 okir@monad.swb.de).
JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
msgmni has been set to 751
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
ttyRI0 at MMIO 0xe0412000 (irq = 2) is a CX2450x UART
brd: module loaded
loop: module loaded
CX2450x MTD driver v1.0 (Jan 1 2013, 01:54:56) © Coolstream International Ltd.
cx2450xflash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
cx2450xflash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
4 cmdlinepart partitions found on MTD device cx2450xflash
Creating 4 MTD partitions on "cx2450xflash":
0x000000000000-0x000000060000 : "U-Boot"
0x000000060000-0x000000080000 : "Splash"
0x000000080000-0x000000480000 : "kernel"
0x000000480000-0x000002000000 : "systemFS"
arcvmac arcvmac: ARC VMAC at 0x80490580 irq 24 00:c5:5c:00:18:44
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
cx2450x-ehci cx2450x-ehci.0: Trident CX2450X EHCI USB-Controller
cx2450x-ehci cx2450x-ehci.0: new USB bus registered, assigned bus number 1
cx2450x-ehci cx2450x-ehci.0: irq 13, io mem 0xe8000100
cx2450x-ehci cx2450x-ehci.0: USB 0.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Trident CX2450X EHCI USB-Controller
usb usb1: Manufacturer: Linux 2.6.34.13-nevis ehci_hcd
usb usb1: SerialNumber: cx2450x-ehci.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
cx2450x-ehci cx2450x-ehci.1: Trident CX2450X EHCI USB-Controller
cx2450x-ehci cx2450x-ehci.1: new USB bus registered, assigned bus number 2
cx2450x-ehci cx2450x-ehci.1: irq 17, io mem 0xe8001100
usb 1-1: new high speed USB device using cx2450x-ehci and address 2
cx2450x-ehci cx2450x-ehci.1: USB 0.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: Trident CX2450X EHCI USB-Controller
usb usb2: Manufacturer: Linux 2.6.34.13-nevis ehci_hcd
usb usb2: SerialNumber: cx2450x-ehci.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
usb 1-1: New USB device found, idVendor=07d1, idProduct=3303
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: 11n Adapter
usb 1-1: Manufacturer: Manufacturer Realtek
usb 1-1: SerialNumber: 00e04c000001
VFS: Mounted root (jffs2 filesystem) on device 31:3.
Freeing init memory: 108K
init started: BusyBox v1.20.2 (2013-02-12 17:42:24 CET)
running /sbin/mknodes
rootdir=/dev
table=<stdin>
makedevs: line 16: can't create node console: File exists
done /sbin/mknodes
starting /etc/init.d/S00loadmodules ...
cs_frontpanel: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
Frontpanel driver v0.12.0 (Dec 5 2012, 15:06:56) © Coolstream International Limited
[1;33mFrontpanel: wakeup source ff time hi ff lo ff
[0m==DriverVersion: v2.6.6.0.20120405==
register rtl8712_netdev_ops to netdev_ops
rtw_wdev_alloc
8712_usb_endpoint_descriptor(0):
bLength=7
bDescriptorType=5
bEndpointAddress=83
wMaxPacketSize=200
bInterval=0
8712_usb_endpoint_descriptor(1):
bLength=7
bDescriptorType=5
bEndpointAddress=4
wMaxPacketSize=200
bInterval=0
8712_usb_endpoint_descriptor(2):
bLength=7
bDescriptorType=5
bEndpointAddress=6
wMaxPacketSize=200
bInterval=0
8712_usb_endpoint_descriptor(3):
bLength=7
bDescriptorType=5
bEndpointAddress=d
wMaxPacketSize=200
bInterval=0
8712u : USB_SPEED_HIGH
nr_endpoint=4
Boot from EFUSE
Autoload OK!!
CustomerID = 0x 0
MAC Address from efuse= 14-d6-4d-7-c7-da
cfg80211_rtw_set_power_mgmt
usbcore: registered new interface driver r871x_usb_drv
rtw driver version=v3.4.3_4369.20120622
Build at: Dec 5 2012 15:05:54
usbcore: registered new interface driver rtl8192cu
Slow work thread pool: Starting up
Slow work thread pool: Ready
fuse init (API version 7.13)
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
CX2450x I2C-bus driver version 0.3b (Dec 5 2012, 15:06:57) © Coolstream International Limited
Memory configured as 2 banks
KAL over-allocation map ('x' = kernel, 'C' = cnxt):
<6>------- 0 ------------- to ------------ 256 ---------------
ooooooooooooooooCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
<6>CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
<6>CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCxxxxxxxxxxxxxxxxxxxxxxx
<6>xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
<6>------- 256 ------------- to ------------ 512 ---------------
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCxxxxxxxx
<6>xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxooooooxxoooooooo
<6>................................................................
<6>................................................................
. = no RAM present
C = Conexant KAL
o = unutilized or Kernel RAM
KAL: Starting the KAL...
KAL Bank[0] cached @ V:0x8a400000 == P:0x0a400000, 5120 KB
KAL Bank[0] uncached @ V:0x83b00000 == P:0x03b00000, 107520 KB
KAL Bank[0] content @ V:0x81000000 == P:0x01000000, 44032 KB
KAL Bank[1] cached @ V:0x00000000 == P:0x00000000, 0 KB
KAL Bank[1] uncached @ V:0x91f00000 == P:0x11f00000, 25600 KB
KAL Bank[1] content @ V:0x90000000 == P:0x10000000, 31744 KB
KAL: Tiled physical region 0x01000000 to 0x03580000 (15)
KAL: Tiled physical region 0x10000000 to 0x11e00000 (15)
KAL: Module loaded
cnxt_base_drv: Initializing Edwards drivers...
cnxt_base_drv: Done initializing Edwards drivers.
cnxt_base_drv: Module loaded with major device 101
FB: cnxtfb_init_inst, plane OSD
FB: mode 1280x720p-50
FB: HD Mode: 1280x720 FrameRate 5
SD Mode: 720x576 FrameRate 2
[logoview] done with Timeout...
/proc/cnxt_trace_flags created
# alsa_card_CX2450_init Success 8 , 116
cs_tsx_hsdp_set_port_speed: num: 594 denom: 7
cs_frontend version 0.6b
DVB: registering new adapter (cs_frontend_dvb)
stv090x_attach: Trying to attach STV090x demodulator(1)
DVB: Unable to find symbol cx24116_attach()
avl2108_attach: Attaching AVL2108 demodulator(0)
DVB: registering adapter 0 frontend 0 (AVL2108 Demodulator)...
cnxt_sata version 2.3cs
scsi0 : cnxt_sata
ata1: SATA max UDMA/133 irq 42
scsi1 : cnxt_sata
ata2: SATA max UDMA/133 irq 35
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
starting /etc/init.d/S01mount ...
starting /etc/init.d/S50hostname ...
starting /etc/init.d/S51networking ...
Configuring network interfaces... ifup: option with empty value " hostname"
Starting ifplugd... vmac_mii_bus: probed
arcvmac arcvmac: PHY driver [Generic PHY] (mii_bus:phy_addr=0:09, irq=-1)
Sat Jan 1 00:00:00 CET 2000
done.
starting /etc/init.d/S52syslogd ...
starting /etc/init.d/S60autofs ...
Jan 1 00:00:00 coolstream syslog.info syslogd started: BusyBox v1.20.2
starting the automounter...
starting /etc/init.d/S90inetd ...
Name server cannot be used, exiting 1 Jan 00:00:00 ntpdate[555]: name server cannot be used, reason: Temporary failure in name resolution
starting /etc/init.d/S95rescan-failed-drives ...
starting /etc/init.d/S96nfsd ...
starting /etc/init.d/S9A_rescue ...
ping: sendto: Network is unreachable
ping: sendto: Network is unreachable
ping: sendto: Network is unreachable
Testmodus: Partition 3 oder Files wuerden jetzt geloescht werden
starting /etc/init.d/S9L_logomask ...
starting /etc/init.d/S9T_tuxcald ...
starting /etc/init.d/S9T_tuxmaild ...
Please press Enter to activate this console. Jan 1 00:00:01 coolstream daemon.err automount[563]: failed to load map, exiting
/var/plugins/operations camd_init
/var/plugins/operations cardserver_start
/var/plugins/operations camd_start
/var/plugins/operations rezap
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
PHY: 0:09 - Link is Down
m_cBoxFrame.iHeight 645 m_cBoxFrameBrowserList.iHeight 322 m_settings.browserFrameHeight 50
avl2108_load_firmware: Waiting for firmware upload (dvb-fe-avl2108.fw)...
i2c i2c-0: firmware: requesting dvb-fe-avl2108.fw
avl2108_load_firmware: Waiting for firmware upload(2)...
avl2108_load_firmware: Firmware upload complete
[/home/image/coolstream/bs-cst-neutrino-hd/source/neutrino-hd/src/zapit/src/frontend.cpp:Open:191] /dev/dvb/adapter0/frontend1: No such file or directory
/var/tuxbox/config/zapit/myservices.xml: No such file or directory
cs_tsx_hsdp_set_port_speed: num: 594 denom: 7
/var/tuxbox/config/deepstandby.off failed: No such file or directory
00:00:10.950 [sectionsd] start
[0;33m[dvbsub @ 0x6dc1a0] Invalid extradata, subtitle streams may be combined!
00:00:10.980 [sectionsd] starting
[0m/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
00:00:11.022 00:00:11.024 freeSatThread::run:: starting, pid 629 (1175463008)
00:00:11.031 eitThread::run:: starting, pid 629 (1158685792)
00:00:11.032 timeThread::run:: starting, pid 629 (1150297184)
cnThread::run:: starting, pid 629 (1167074400)
00:00:11.075 timeThread: getting DVB time (isOpen 1)
00:00:11.554 [sectionsd] commandserviceChanged: Service change to b45803fb0001283d
00:00:11.562 timeThread: getting DVB time done : -1 messaging_neutrino_sets_time 1
00:00:11.563 timeThread: Time set FAILED (enabled: ntp 0 dvb 1)
00:00:11.576 timeThread: going to sleep 1 seconds, running 1 scanning 1
00:00:11.588 [sectionsd] commandserviceChanged: Service changed to b45803fb0001283d
00:00:11.604 timeThread: going to sleep for 1 seconds...
showChannelLogo: logo_available: 1 file: /share/tuxbox/neutrino/icons/logo/Das Erste HD.png
after showchannellogo, mode = 3 ret = 3 logo_ok = 1
00:00:12.614 timeThread: wakeup, running 1 scanning 1 channel 3fb0001283d reason 110
00:00:12.622 timeThread: getting DVB time (isOpen 1)
00:00:16.134 [sectionsd] commandserviceChanged: Service change to b45803fb0001283d
00:00:16.135 [sectionsd] commandserviceChanged: Service changed to b45803fb0001283d
rescanning /sys/class/scsi_host/host0
ata1: hard resetting link
logomask Version 1.2
ata1: SATA link down (SStatus 0 SControl 300)
ata1: EH complete
rescanning /sys/class/scsi_host/host1
ata2: hard resetting link
00:00:21.074 [sectionsd] commandserviceChanged: Service change to b45803fb0001283d
00:00:21.075 [sectionsd] commandserviceChanged: Service changed to b45803fb0001283d
ata2: SATA link down (SStatus 0 SControl 300)
ata2: EH complete
wget: can't connect to remote host (127.0.0.1): Network is unreachable
wget: can't connect to remote host (127.0.0.1): Network is unreachable
wget: can't connect to remote host (127.0.0.1): Network is unreachable
-
Sorry. Hatte bereits das aktuelle KW-Image V2.01 genommen.
-
Hallo zusammen.
Ich habe ein Problem mit meiner Coolstream ZEE nachdem ich das Keywelt Img 1.60 geflashed habe. Es werden zwar noch die Netzwerkadapter erkannt (wlan0, eth0) aber die Cooli bekommt keine Netzwerkverbindung hin. Die Erkennung des WLAN-USB-Sticks mit MAC-Adresse funktioniert und die Konfiguration (DHCP ein, WLAN-Name und WPA-Schlüssel) ist korrekt gespeichert, aber beim Neuboot der Cooli wird der WLAN-Stick nicht angesprochen (blinkt nicht) -> Fehlermeldung kein Netzwerk. Ebenso reagiert die Cooli nicht auf Anschliessen an meine FritzBox über Ethernet-Kabel (Konfiguration mit DHCP ein).
Ein Versuch, ein original-Image zu flashen (über USB-Frontport)scheitert an der Erkennung des USB-Sticks (FAT32 mit Ordner coolstream und Images) beim Booten der Cooli.
Hat jemand Ideen oder Hinweise, was ich noch probieren kann.
Vielen Dank
p.s.:Habe leider kein RS232 Kabel zur Bootlog-Prüfung
Collstream-ZEE bekommt keine Netzwerkverbindung
in Allgemein
Geschrieben
Nachdem ja der Stick mit dem Emergency-Flash unter dem Original CST-Image lief, habe ich nochmal das Keywelt Image V2.01 geflashed. Und jetzt funktioniert nach einigen Versuchen dort auch der WLAN-Stick (Edimax 150Mbps nano USB Adapter). Wichtig ist auf jeden Fall, dass man die Coolie lange genug ausgeschaltet und stromlos lässt, nachdem man die Schnittstelle auf wlan0 gestellt und die Konfiguration (WLAN-Name, WLAN-Passwort, dhcp ein) vorgenommen und (!!!) gespeichert hat.