Jump to content

MaV3r1cK

Full Member
  • Gesamte Inhalte

    5
  • Benutzer seit

  • Letzter Besuch

Reputation in der Community

0 Neutral

Über MaV3r1cK

  • Rang
    Einmalposter
  1. Danke für euere Hilfe. Habe jetzt mal alles von Hand zu Fuß probiert. wenn ich den Flash von Hand lösche dann bekomme ich die Meldung > Erase Flash Bank # 1 - Warning: 1 protected sectors will not be erased! > done > Erase Flash Bank # 2 - can't erase unknown flash type - aborted > => scheint wohl ein Flash kaputt zu sein
  2. Ah ok, keywelt mal wieder draufgespielt. Hallenberg hat direkt Probleme gemacht. Hallenberg Log: ---------------------------------------------------------------------------------------------------------- Þdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.2 mID 01 debug: feID dd gtxID 00 debug: fpID 5a dsID http://Hallenberg.com debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 16/16/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 129.42.14.30, My IP 129.42.14.202 debug: Sending TFTP-request for file u-boot will verify ELF image, start= 0x800000, size= 140064 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 U-Boot 1.3.4 (Tuxbox - Hallenberg.com) (Nov 29 2008 - 23:53:59) CPU: PPC823ZTnnA at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 129.42.14.30; our IP address is 129.42.14.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 129.42.14.30; our IP address is 129.42.14.202 Filename 'logo-lcd'. Load address: 0x100000 Loading: ## done Bytes transferred = 7680 (1e00 hex) BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 129.42.14.30; our IP address is 129.42.14.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 129.42.14.30; our IP address is 129.42.14.202 Filename 'logo-fb'. Load address: 0x100000 Loading: #################################### done Bytes transferred = 179877 (2bea5 hex) debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.2 mID 01 debug: feID dd gtxID 00 debug: fpID 5a dsID http://Hallenberg.com debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 16/16/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 129.42.14.30, My IP 129.42.14.202 debug: Sending TFTP-request for file u-boot will verify ELF image, start= 0x800000, size= 140064 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 U-Boot 1.3.4 (Tuxbox - Hallenberg.com) (Nov 29 2008 - 23:53:59) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 129.42.14.30; our IP address is 129.42.14.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 129.42.14.30; our IP address is 129.42.14.202 Filename 'logo-lcd'. Load address: 0x100000 Loading: ## done Bytes transferred = 7680 (1e00 hex) BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 129.42.14.30; our IP address is 129.42.14.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 129.42.14.30; our IP address is 129.42.14.202 Filename 'logo-fb'. Load address: 0x100000 Loading: #################################### done Bytes transferred = 179877 (2bea5 hex) debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.2 mID 01 debug: feID dd gtxID 00 debug: fpID 5a dsID http://Hallenberg.com debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 16/16/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 129.42.14.30, My IP 129.42.14.202 debug: Sending TFTP-request for file u-boot will verify ELF image, start= 0x800000, size= 140064 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 U-Boot 1.3.4 (Tuxbox - Hallenberg.com) (Nov 29 2008 - 23:53:59) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 129.42.14.30; our IP address is 129.42.14.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 129.42.14.30; our IP address is 129.42.14.202 Filename 'logo-lcd'. Load address: 0x100000 Loading: ## done Bytes transferred = 7680 (1e00 hex) BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 129.42.14.30; our IP address is 129.42.14.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 129.42.14.30; our IP address is 129.42.14.202 Filename 'logo-fb'. Load address: 0x100000 Loading: #################################### done Bytes transferred = 179877 (2bea5 hex) debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.2 mID 01 debug: feID dd gtxID 00 debug: fpID 5a dsID http://Hallenberg.com debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 16/16/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 129.42.14.30, My IP 129.42.14.202 debug: Sending TFTP-request for file u-boot will verify ELF image, start= 0x800000, size= 140064 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 U-Boot 1.3.4 (Tuxbox - Hallenberg.com) (Nov 29 2008 - 23:53:59) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB ------------------------------------------------------------- BootP: Request von 00509C444FAE erhalten Error DeleteIpNetEntry: Falscher Parameter. BootP: ARP-Eintrag mit IP: 129.42.14.202 und Mac: 00509C444FAE gesetzt BootP: Antwort an 00509C444FAE gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\u-boot TFTP: Transfer erfolgreich beendet BootP: Request von 00509C444FAE erhalten BootP: ARP-Eintrag mit IP: 129.42.14.202 und Mac: 00509C444FAE gesetzt BootP: Antwort an 00509C444FAE gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\logo-lcd TFTP: Transfer erfolgreich beendet BootP: Request von 00509C444FAE erhalten BootP: ARP-Eintrag mit IP: 129.42.14.202 und Mac: 00509C444FAE gesetzt BootP: Antwort an 00509C444FAE gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\logo-fb TFTP: Transfer erfolgreich beendet BootP: Request von 00509C444FAE erhalten BootP: ARP-Eintrag mit IP: 129.42.14.202 und Mac: 00509C444FAE gesetzt BootP: Antwort an 00509C444FAE gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\u-boot TFTP: Transfer erfolgreich beendet BootP: Request von 00509C444FAE erhalten BootP: ARP-Eintrag mit IP: 129.42.14.202 und Mac: 00509C444FAE gesetzt BootP: Antwort an 00509C444FAE gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\logo-lcd TFTP: Transfer erfolgreich beendet BootP: Request von 00509C444FAE erhalten BootP: ARP-Eintrag mit IP: 129.42.14.202 und Mac: 00509C444FAE gesetzt BootP: Antwort an 00509C444FAE gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\logo-fb TFTP: Transfer erfolgreich beendet BootP: Request von 00509C444FAE erhalten BootP: ARP-Eintrag mit IP: 129.42.14.202 und Mac: 00509C444FAE gesetzt BootP: Antwort an 00509C444FAE gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\u-boot TFTP: Transfer erfolgreich beendet BootP: Request von 00509C444FAE erhalten BootP: ARP-Eintrag mit IP: 129.42.14.202 und Mac: 00509C444FAE gesetzt BootP: Antwort an 00509C444FAE gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\logo-lcd TFTP: Transfer erfolgreich beendet BootP: Request von 00509C444FAE erhalten BootP: ARP-Eintrag mit IP: 129.42.14.202 und Mac: 00509C444FAE gesetzt BootP: Antwort an 00509C444FAE gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\logo-fb TFTP: Transfer erfolgreich beendet BootP: Request von 00509C444FAE erhalten BootP: ARP-Eintrag mit IP: 129.42.14.202 und Mac: 00509C444FAE gesetzt BootP: Antwort an 00509C444FAE gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\u-boot TFTP: Transfer erfolgreich beendet ------ Zusatzinformationen ------ Gewählter Netzwerkadapter: SysKonnect SK-9521 V2.0 10/100/1000Base-T Adapter, PCI, Copper RJ-45 - Paketplaner-Miniport (0) IP-Adresse des Netzwerkadapters: 129.42.14.30 IP-Adresse die die dbox bekommt: 129.42.14.202 Betriebssystem: Microsoft Windows XP Professional Service Pack 3 (Build 2600) CPU 1: AMD Athlon XP 2000+ @ 1677 MHz Dateiname des Images: Keywelt_V1_September_2x_SQUASHFS_2009.img Imagetyp: Zwei Flashs DBOX-IFA Version: 3.4 ------ Powered by http://www.dboxservice-hallenberg.de ------ mit dem Dbox-Bootmanager ging es Kommt jetzt folgendes jetzt bekomm ich folgendes -------------------------------------------------------------------------------------------- debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.2 mID 01 debug: feID dd gtxID 00 debug: fpID 5a dsID 01-46.6f.d1.06.00.00-db debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 16/16/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0036 will verify ELF image, start= 0x800000, size= 171660 verify sig: 262 Branching to 0x40000 U-Boot 2009.08 (Tuxbox) (Sep 26 2009 - 14:36:43) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ... done. env: found console with value ttyS0 env: found lcd_inverse with value 0 env: found lcd_contrast with value 15 FB: ready In: serial Out: serial Err: serial Net: SCC ETHERNET LCD: ready debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.2 mID 01 debug: feID dd gtxID 00 debug: fpID 5a dsID 01-46.6f.d1.06.00.00-db debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 16/16/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0036 will verify ELF image, start= 0x800000, size= 171660 verify sig: 262 Branching to 0x40000 U-Boot 2009.08 (Tuxbox) (Sep 26 2009 - 14:36:43) CPU: PPC823ZTnnA at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ... done. env: found console with value ttyS0 env: found lcd_inverse with value 0 env: found lcd_contrast with value 15 FB: ready In: serial Out: serial Err: serial Net: SCC ETHERNET LCD: ready debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.2 mID 01 debug: feID dd gtxID 00 debug: fpID 5a dsID 01-46.6f.d1.06.00.00-db debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 16/16/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0036 will verify ELF image, start= 0x800000, size= 171660 verify sig: 262 Branching to 0x40000 U-Boot 2009.08 (Tuxbox) (Sep 26 2009 - 14:36:43) CPU: PPC823ZTnnA at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ... done. env: found console with value ttyS0 env: found lcd_inverse with value 0 env: found lcd_contrast with value 15 FB: ready In: serial Out: serial Err: serial Net: SCC ETHERNET LCD: ready debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.2 mID 01 debug: feID dd gtxID 00 debug: fpID 5a dsID 01-46.6f.d1.06.00.00-db debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 16/16/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0036 will verify ELF image, start= 0x800000, size= 171660 verify sig: 262 Branching to 0x40000 U-Boot 2009.08 (Tuxbox) (Sep 26 2009 - 14:36:43) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ... done. env: found console with value ttyS0 env: found lcd_inverse with value 0 env: found lcd_contrast with value 15 FB: ready In: serial Out: serial Err: serial Net: SCC ETHERNET LCD: ready debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.2 mID 01 debug: feID dd gtxID 00 debug: fpID 5a dsID 01-46.6f.d1.06.00.00-db debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 16/16/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0012
  3. Also das mit dem Flash erase hab ich mal versucht. Hat leider nicht geklappt. Also ich komme nicht einmal bis zu Meldung "Flash erase". Habe die "Pfeil nach unten"-Taste an der Dbox festgehalten und dann den stecker reingesteckt. Taste ca 1 Minute gedrückt gelassen. Das einzigste was passiert war das die Box im Bootprompt stand. Konnte man schön per Telnet nachverfolgen. Anbei mal den mitschnitt des Bootprozesses debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.2 mID 01 debug: feID dd gtxID 00 debug: fpID 5a dsID 01-46.6f.d1.06.00.00-db debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 16/16/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0036 will verify ELF image, start= 0x800000, size= 170380 verify sig: 262 Branching to 0x40000 U-Boot 2009.08 (Tuxbox) (Mr 11 2010 - 01:56:32) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ........ done. env: found console with value ttyS0 env: found baudrate with value 115200 tpp debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.2 mID 01 debug: feID dd gtxID 00 debug: fpID 5a dsID 01-46.6f.d1.06.00.00-db debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 16/16/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0036 will verify ELF image, start= 0x800000, size= 170380 verify sig: 262 Branching to 0x40000 U-Boot 2009.08 (Tuxbox) (Mr 11 2010 - 01:56:32) CPU: PPC823ZTnnA at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ........ done. env: found console with value ttyS0 env: found baudrate with value 115200 txx debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.2 mID 01 debug: feID dd gtxID 00 debug: fpID 5a dsID 01-46.6f.d1.06.00.00-db debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 16/16/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0036 will verify ELF image, start= 0x800000, size= 170380 verify sig: 262 Branching to 0x40000 U-Boot 2009.08 (Tuxbox) (Mr 11 2010 - 01:56:32) CPU: PPC823ZTnnA at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ........ done. env: found console with value ttyS0 env: found baudrate with value 115200 Tpp debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.2 mID 01 debug: feID dd gtxID 00 debug: fpID 5a dsID 01-46.6f.d1.06.00.00-db debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 16/16/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0036 will verify ELF image, start= 0x800000, size= 170380 verify sig: 262 Branching to 0x40000 U-Boot 2009.08 (Tuxbox) (Mr 11 2010 - 01:56:32) CPU: PPC823ZTnnA at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ........ done. env: found console with value ttyS0 env: found baudrate with value 115200 debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.2 mID 01 debug: feID dd gtxID 00 debug: fpID 5a dsID 01-46.6f.d1.06.00.00-db debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 16/16/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0036 will verify ELF image, start= 0x800000, size= 170380 verify sig: 262 Branching to 0x40000 U-Boot 2009.08 (Tuxbox) (Mr 11 2010 - 01:56:32) CPU: PPC823ZTnnA at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ........ done. env: found console with value ttyS0 env: found baudrate with value 115200 TpP debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.2 mID 01 debug: feID dd gtxID 00 debug: fpID 5a dsID 01-46.6f.d1.06.00.00-db debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 16/16/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast
  4. Erstmal vielen dank Gandal, bin gerade auf der Arbeit. Werde die Log heute Abend mal posten. Ich hatte mit dem Dbox-Bootmanager ein neues image eingespielt. Aber ein Flash erase habe ich nicht probiert. Wußte auch nicht das das geht ;-). Gruß
  5. Hi Jungs, ich hab mir für meine Mutter in der Bucht ne Dbox ersteigert. Nokia Avia500. Jedoch bootet das Ding nicht. Der Watchdog resettet ständig die Box. Nach etwas nachlesen im Internet habe ich dann festgestellt das die Box BMon1.2 hat und der garnicht auf die Avia500 draufgehört. Die Jumper für den Schreibschutz zu deaktivieren waren auch gesetzt. Glücklicherweise hab ich genau die selbe Dbox. Ich habe es geschafft per ppcboot den bootloader zu extrahieren. Jetzt stehe ich vor dem für mich unlösbaren Problem den Bootloader meiner Box in die neue reinzuschreiben. Gibts dafür irgendwelche Tools? In meiner Version von ppcboot hab ich mal auf anhieb nichts gefunden wie es funktionieren könnte. Gruß
×
×
  • Neu erstellen...