Viech
-
Gesamte Inhalte
22 -
Benutzer seit
Inhaltstyp
Profile
Forum
Kalender
Downloads
Blogs
Galerie
Articles
Beiträge erstellt von Viech
-
-
@Viech
Ich hab dir hier schon geantwortet.
Sorry,
hab's zu spät gelesen.
... also Kontaktprobleme scheiden vollkommen aus, eine zweite Zicke zum testen besitze ich leider nicht...
Danke.
-
Hallo,
ich habe das IF auch eingebaut, aber die Platte läuft nicht an.
Irgendwelche Profis die mir helfen können?
Hier mein Log:
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: LCD init error -1
debug: BMon V1.3 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-39.7f.3f.08.00.00-b3
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036debug: Got Block #0040
will verify ELF image, start= 0x800000, size= 162920
verify sig: 262
Branching to 0x40000
U-Boot 1.2.0 (Tuxbox) (Nov 27 2007 - 16:34:18)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.3
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . | / . - \ | / . . - \ done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 1 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 669734 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 669670 Bytes = 654 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.35.3-dbox2 (image@Server) (gcc version 3.4.4) #40 Di Nov 27 16:34:55 CET 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30828k available (1144k kernel code, 336k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:3d:ef:37
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x005e0000 : "root (squashfs)"
0x005e0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.7.2 (2007-11-27 16:39:07 CET)
##### Image-Version: Keywelt_Nov2007_V1 #####
Tue Nov 27 16:54:00 UTC 2007
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.12 2007/11/03 10:32:16 (alt. IRQ) dbt Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of IDE-Interface is at: 0xc3890000
dboxide: probing dbox2 IDE CPLD: ctrl register not valid: 0x00ff0007 != 0x00ff0000
dboxide: no valid IDE-Interface detected
swapon: can't stat '/dev/ide/host0/bus0/target0/lun0/part1': No such file or directory
mount: mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such file or directory
/dev/ide/host0/bus0/target0/lun0/disc: No such file or directory
warte auf 'init_ide'
warte auf 'init_ide'
warte auf 'init_ide'
warte auf 'init_ide'
warte auf 'init_ide'
warte auf 'init_ide'
warte auf 'init_ide'
warte auf 'init_ide'
warte auf 'init_ide'
warte auf 'init_ide'
warte auf 'init_ide'
warte auf 'init_ide'
warte auf 'init_ide'
warte auf 'init_ide'
warte auf 'init_ide'
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Detected STB:
Vendor: Sagem
Model: D-BOX2
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.35.3-dbox2/misc/dvb-core.o was compiled for kernel version 2.4.34-dbox2
while this kernel is version 2.4.35.3-dbox2
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.35.3-dbox2/misc/dbox2_fp_input.o was compiled for kernel version 2.4.34-dbox2
while this kernel is version 2.4.35.3-dbox2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.35.3-dbox2/misc/avia_av.o was compiled for kernel version 2.4.34-dbox2
while this kernel is version 2.4.35.3-dbox2
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.35.3-dbox2/misc/at76c651.o was compiled for kernel version 2.4.34-dbox2
while this kernel is version 2.4.35.3-dbox2
DVB: registering frontend 0:0 (Atmel AT76C651B with TUA6010XS)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.249 2007/10/30 08:48:23 seife Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
/var/plugins/operations camd_init
/var/plugins/operations cardserver_start
$Id: zapit.cpp,v 1.403 2007/11/08 19:32:15 Kroki & Worschter & SnowHead Exp $
[zapit] MAX_SOCKETS=3
[frontend] uncommitted_switch_mode 0
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
[getservices] dup transponder id 11 onid 85
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 2 onid 85
[getservices] dup transponder id 4 onid 85
[getservices] dup transponder id 1 onid 85
/tmp/currentservices.xml: No such file or directory
/var/plugins/operations camd_start
insmod: warning: kernel-module version mismatch
/var/modules/multicam.o was compiled for kernel version 2.4.34-dbox2
while this kernel is version 2.4.35.3-dbox2
DBox2 Multicam Driver v1.01 skars & doz21 smile.gif
$Id: controld.cpp,v 1.127 2007/07/01 08:40:13 dbluelle Exp $
[controld] Boxtype detected: (3, Sagem D-BOX2)
[controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1
[controld] setting VideoFormat to auto
[yhttpd] Webserver nhttpd/3.1.3 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
/var/plugins/operations sect_renice
/var/plugins/operations epg_reinit
neutrino: /lib/libpng12.so.0: no version information available (required by neutrino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[CFSMounter] Mount(0) 192.168.2.220:/tmp/harddisk/part1/movie -> /mnt/filme
mount: RPC: Unable to send; errno = Network is unreachable
[CFSMounter] FS mount error: "mount -t nfs 192.168.2.220:/tmp/harddisk/part1/movie /mnt/filme -o rw,soft,udp,nolock,rsize=32768,wsize=32768"
[CFSMounter] Mount(0) 192.168.2.220:/tmp/harddisk/part1/ -> /mnt/custom
mount: RPC: Unable to send; errno = Network is unreachable
[CFSMounter] FS mount error: "mount -t nfs 192.168.2.220:/tmp/harddisk/part1/ /mnt/custom -o rw,soft,udp,nolock,rsize=32768,wsize=32768"
[neutrino] menue setup
[controld] setting VideoFormat to auto
[neutrino] registering as event client
[controld] setting VideoFormat to auto
[neutrino] initialized everything
PES, queue 0 normal.
DMXDEV COMPAT: DMX_SET_FILTER pid 1
[CBasicClient] connect failed: /tmp/camd.sock01
DMXDEV COMPAT: DMX_SET_FILTER pid 1003
DMXDEV COMPAT: DMX_STOP
DMXDEV COMPAT: DMX_SET_FILTER pid 1003
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed: /tmp/camd.sock02
DMXDEV COMPAT: DMX_STOP
DMXDEV COMPAT: DMX_SET_FILTER pid 1003
DMXDEV COMPAT: DMX_STOP
DMXDEV COMPAT: DMX_SET_FILTER pid 1003
/tmp/camd.sock02: No such file oDMXDEV COMPAT: DMX_SET_FILTER pid 1001
DMXDEV COMPAT: DMX_STOP
DMXDEV COMPAT: DMX_SET_FILTER pid 1001
DMXDEV COMPAT: DMX_STOP
DMXDEV COMPAT: DMX_SET_FILTER pid 1001
DMXDEV COMPAT: DMX_STOP
DMXDEV COMPAT: DMX_SET_FILTER pid 1001
DMXDEV COMPAT: DMX_SET_FILTER pid 1
r directory
[timeThread] - 28.05.2008 18:38:54, tim: Wed May 28 18:38:54 2008
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
[timeThread] Time set via DVB, going to sleep for 1800 seconds.
Danke...
-
<?xml version="1.0" encoding="iso-8859-1"?>
<cables>
<cable name="KMS" satfeed="true" flags="9">
<transponder frequency="113000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="121000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="346000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="354000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="362000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="370000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="378000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="386000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="394000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="402000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="410000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="418000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="426000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="434000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="442000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="450000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="458000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="466000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
</cable>
</cables>
Hallo Vieh,
auch das ist leider nicht die komplette Liste - es fehlt RTL komplett.
Ich werde mal die Liste von Xylen ausprobieren, evtl. hab ich hier mehr Glück.
Grüße
@FaCeOff,
nur so am Rande...
Klappt es jetzt mit dem Empfang von den RTL's ?
-
<?xml version="1.0" encoding="iso-8859-1"?>
<cables>
<cable name="KMS" satfeed="true" flags="9">
<transponder frequency="113000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="121000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="346000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="354000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="362000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="370000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="378000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="386000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="394000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="402000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="410000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="418000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="426000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="434000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="442000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="450000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="458000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
<transponder frequency="466000000" symbol_rate="6900000" fec_inner="9" modulation="6"/>
</cable>
</cables>
Neues IDE/MMC/RTC-Interface für die DBox
in Allgemein
Geschrieben · bearbeitet von Viech
besitze ich schon....
Hat an der DBox gelegen, mit der jetzigen läuft's ohne Probleme.
Fehlerbeseitigung möglich?
Danke für die Hilfe.