Viech

besitze ich schon.... Hat an der DBox gelegen, mit der jetzigen läuft's ohne Probleme. Fehlerbeseitigung möglich? Danke für die Hilfe.

Sorry, hab's zu spät gelesen. ... also Kontaktprobleme scheiden vollkommen aus, eine zweite Zicke zum testen besitze ich leider nicht... Danke.

Hallo, ich habe das IF auch eingebaut, aber die Platte läuft nicht an. Irgendwelche Profis die mir helfen können? Hier mein Log: debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS debug: LCD init error -1 debug: BMon V1.3 mID 03 debug: feID 00 enxID 03 debug: fpID 52 dsID 01-39.7f.3f.08.00.00-b3 debug: HWrev 61 FPrev 0.23 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036debug: Got Block #0040 will verify ELF image, start= 0x800000, size= 162920 verify sig: 262 Branching to 0x40000 U-Boot 1.2.0 (Tuxbox) (Nov 27 2007 - 16:34:18) CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Sagem, BMon V1.3 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: . | / . - \ | / . . - \ done. FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 1 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 669734 bytes loaded to 0x100000 ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 669670 Bytes = 654 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.35.3-dbox2 (image@Server) (gcc version 3.4.4) #40 Di Nov 27 16:34:55 CET 2007 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs Decrementer Frequency = 247500000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x2000) Console: colour dummy device 80x25 Calibrating delay loop... 65.74 BogoMIPS Memory: 30828k available (1144k kernel code, 336k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc. squashfs: version 3.0 (2006/03/15) Phillip Lougher i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:3d:ef:37 loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "FLFS (U-Boot)" 0x00040000-0x005e0000 : "root (squashfs)" 0x005e0000-0x00800000 : "var (jffs2)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init init started: BusyBox v1.7.2 (2007-11-27 16:39:07 CET) ##### Image-Version: Keywelt_Nov2007_V1 ##### Tue Nov 27 16:54:00 UTC 2007 Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx dboxide: $Id: main.c,v 1.12 2007/11/03 10:32:16 (alt. IRQ) dbt Exp $ ide: late registration of driver. dboxide: activating cs2 dboxide: address space of IDE-Interface is at: 0xc3890000 dboxide: probing dbox2 IDE CPLD: ctrl register not valid: 0x00ff0007 != 0x00ff0000 dboxide: no valid IDE-Interface detected swapon: can't stat '/dev/ide/host0/bus0/target0/lun0/part1': No such file or directory mount: mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such file or directory /dev/ide/host0/bus0/target0/lun0/disc: No such file or directory warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $ Detected STB: Vendor: Sagem Model: D-BOX2 insmod: warning: kernel-module version mismatch /lib/modules/2.4.35.3-dbox2/misc/dvb-core.o was compiled for kernel version 2.4.34-dbox2 while this kernel is version 2.4.35.3-dbox2 [i2c-8xx]: mpc 8xx i2c init [i2c-8xx]: adapter: 0 insmod: warning: kernel-module version mismatch /lib/modules/2.4.35.3-dbox2/misc/dbox2_fp_input.o was compiled for kernel version 2.4.34-dbox2 while this kernel is version 2.4.35.3-dbox2 $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $ $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $ DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600). dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $ insmod: warning: kernel-module version mismatch /lib/modules/2.4.35.3-dbox2/misc/avia_av.o was compiled for kernel version 2.4.34-dbox2 while this kernel is version 2.4.35.3-dbox2 avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $ avia_av_core: Starting avia_av_wdt thread. avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $ avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $ avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $ avia_gt_core: autodetecting chip type... eNX avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $ avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $ avia_gt_ucode: loaded ucode v0014 avia_gt_ucode: ucode section filters disabled. avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning... avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $ avia_gt_pcm_set_rate(44100) avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $ avia_gt_core: Loaded AViA eNX/GTX driver avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $ avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $ avia_gt_pcm_set_rate(44100) avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $ insmod: warning: kernel-module version mismatch /lib/modules/2.4.35.3-dbox2/misc/at76c651.o was compiled for kernel version 2.4.34-dbox2 while this kernel is version 2.4.35.3-dbox2 DVB: registering frontend 0:0 (Atmel AT76C651B with TUA6010XS)... avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $ avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $ Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.249 2007/10/30 08:48:23 seife Exp $ [sectionsd] Caching max 6000 events [sectionsd] Caching 14 days [sectionsd] Caching 6 hours Extended Text [sectionsd] Events are old 60min after their end time /var/tuxbox/config/zapit/epgfilter.xml: No such file or directory /var/tuxbox/config/mybouquets.xml: No such file or directory /var/plugins/operations camd_init /var/plugins/operations cardserver_start $Id: zapit.cpp,v 1.403 2007/11/08 19:32:15 Kroki & Worschter & SnowHead Exp $ [zapit] MAX_SOCKETS=3 [frontend] uncommitted_switch_mode 0 [getservices] /var/tuxbox/config/zapit/myservices.xml found. [getservices] dup transponder id 11 onid 85 [getservices] dup transponder id 3 onid 85 [getservices] dup transponder id 2 onid 85 [getservices] dup transponder id 4 onid 85 [getservices] dup transponder id 1 onid 85 /tmp/currentservices.xml: No such file or directory /var/plugins/operations camd_start insmod: warning: kernel-module version mismatch /var/modules/multicam.o was compiled for kernel version 2.4.34-dbox2 while this kernel is version 2.4.35.3-dbox2 DBox2 Multicam Driver v1.01 skars & doz21 smile.gif $Id: controld.cpp,v 1.127 2007/07/01 08:40:13 dbluelle Exp $ [controld] Boxtype detected: (3, Sagem D-BOX2) [controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1 [controld] setting VideoFormat to auto [yhttpd] Webserver nhttpd/3.1.3 (yhttpd_core/1.2.0) [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular) [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular) [LCDFONT] Intializing font cache... [yhttpd] Webserver starting... /var/plugins/operations sect_renice /var/plugins/operations epg_reinit neutrino: /lib/libpng12.so.0: no version information available (required by neutrino) starting /bin/neutrino [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... [LCDFONT] FTC_Face_Requester (Fix15/Bold) [LCDFONT] FTC_Face_Requester (Fix14/Bold) /dev/input/event1: No such file or directory [CFSMounter] Mount(0) 192.168.2.220:/tmp/harddisk/part1/movie -> /mnt/filme mount: RPC: Unable to send; errno = Network is unreachable [CFSMounter] FS mount error: "mount -t nfs 192.168.2.220:/tmp/harddisk/part1/movie /mnt/filme -o rw,soft,udp,nolock,rsize=32768,wsize=32768" [CFSMounter] Mount(0) 192.168.2.220:/tmp/harddisk/part1/ -> /mnt/custom mount: RPC: Unable to send; errno = Network is unreachable [CFSMounter] FS mount error: "mount -t nfs 192.168.2.220:/tmp/harddisk/part1/ /mnt/custom -o rw,soft,udp,nolock,rsize=32768,wsize=32768" [neutrino] menue setup [controld] setting VideoFormat to auto [neutrino] registering as event client [controld] setting VideoFormat to auto [neutrino] initialized everything PES, queue 0 normal. DMXDEV COMPAT: DMX_SET_FILTER pid 1 [CBasicClient] connect failed: /tmp/camd.sock01 DMXDEV COMPAT: DMX_SET_FILTER pid 1003 DMXDEV COMPAT: DMX_STOP DMXDEV COMPAT: DMX_SET_FILTER pid 1003 /tmp/camd.sock01: No such file or directory [CBasicClient] connect failed: /tmp/camd.sock02 DMXDEV COMPAT: DMX_STOP DMXDEV COMPAT: DMX_SET_FILTER pid 1003 DMXDEV COMPAT: DMX_STOP DMXDEV COMPAT: DMX_SET_FILTER pid 1003 /tmp/camd.sock02: No such file oDMXDEV COMPAT: DMX_SET_FILTER pid 1001 DMXDEV COMPAT: DMX_STOP DMXDEV COMPAT: DMX_SET_FILTER pid 1001 DMXDEV COMPAT: DMX_STOP DMXDEV COMPAT: DMX_SET_FILTER pid 1001 DMXDEV COMPAT: DMX_STOP DMXDEV COMPAT: DMX_SET_FILTER pid 1001 DMXDEV COMPAT: DMX_SET_FILTER pid 1 r directory [timeThread] - 28.05.2008 18:38:54, tim: Wed May 28 18:38:54 2008 [controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3) [timeThread] Time set via DVB, going to sleep for 1800 seconds. Danke...

Hallo Vieh, auch das ist leider nicht die komplette Liste - es fehlt RTL komplett. Ich werde mal die Liste von Xylen ausprobieren, evtl. hab ich hier mehr Glück. Grüße @FaCeOff, nur so am Rande... Klappt es jetzt mit dem Empfang von den RTL's ?

<?xml version="1.0" encoding="iso-8859-1"?> <cables> <cable name="KMS" satfeed="true" flags="9"> <transponder frequency="113000000" symbol_rate="6900000" fec_inner="9" modulation="6"/> <transponder frequency="121000000" symbol_rate="6900000" fec_inner="9" modulation="6"/> <transponder frequency="346000000" symbol_rate="6900000" fec_inner="9" modulation="6"/> <transponder frequency="354000000" symbol_rate="6900000" fec_inner="9" modulation="6"/> <transponder frequency="362000000" symbol_rate="6900000" fec_inner="9" modulation="6"/> <transponder frequency="370000000" symbol_rate="6900000" fec_inner="9" modulation="6"/> <transponder frequency="378000000" symbol_rate="6900000" fec_inner="9" modulation="6"/> <transponder frequency="386000000" symbol_rate="6900000" fec_inner="9" modulation="6"/> <transponder frequency="394000000" symbol_rate="6900000" fec_inner="9" modulation="6"/> <transponder frequency="402000000" symbol_rate="6900000" fec_inner="9" modulation="6"/> <transponder frequency="410000000" symbol_rate="6900000" fec_inner="9" modulation="6"/> <transponder frequency="418000000" symbol_rate="6900000" fec_inner="9" modulation="6"/> <transponder frequency="426000000" symbol_rate="6900000" fec_inner="9" modulation="6"/> <transponder frequency="434000000" symbol_rate="6900000" fec_inner="9" modulation="6"/> <transponder frequency="442000000" symbol_rate="6900000" fec_inner="9" modulation="6"/> <transponder frequency="450000000" symbol_rate="6900000" fec_inner="9" modulation="6"/> <transponder frequency="458000000" symbol_rate="6900000" fec_inner="9" modulation="6"/> <transponder frequency="466000000" symbol_rate="6900000" fec_inner="9" modulation="6"/> </cable> </cables>