yogi70
-
Gesamte Inhalte
23 -
Benutzer seit
Inhaltstyp
Profile
Forum
Kalender
Downloads
Blogs
Galerie
Articles
Beiträge erstellt von yogi70
-
-
Moin,
hab gereade versucht eine Trinity V1 über den Emergency Complete Flash aufs Keywelt image zu bekommen - es wird auch kurz das KeyWelt logo angezeigt aber dann hängt die Box und nix tut sich mehr...
bevor ich die Box geflasht hatte habe ich mich per telnet eingelogged und geschaut um welche Platform es sich handelt:# uname -a Linux stb_00C55C5EAC2A 2.6.34 #5 SMP Tue Jun 18 20:03:24 HKT 2013 armv7l GNU/Linux # cat /proc/cpuinfo Processor : ARMv7 Processor rev 1 (v7l) processor : 0 BogoMIPS : 996.14 Features : swp half thumb fastmult vfp edsp thumbee vfpv3 vfpv3d16 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x1 CPU part : 0xc09 CPU revision : 1 Hardware : Entropic STB Apollo platform Revision : 84700102 Serial : 0123…
Für mich sieht es so aus als ob er das image nicht flashen kann
reading rootfs.arm.jffs2.nand 36113564 bytes read NAND erase: device 0 offset 0x0, size 0x10000000 Bad block table found at page 262080, version 0x01 Bad block table found at page 262016, version 0x01 Erasing at 0xffe0000 -- 100% complete. OK NAND write: device 0 offset 0x0, size 0x2270c9c 36113564 bytes written: OK ** Invalid boot device ** ** Skipping rootfs1.arm.jffs2.nand ** ** Invalid boot device ** ** Skipping var.arm.jffs2.nand ** resetting ...
nach dem booten komme ich auch per Telnet auf die Box - so ganz tot ist sie also nicht...
Hier das komplette Flash-Protokoll mit eingestecktem USB-Stick und drücken der Power-Taste - der USB Stick wird beim ersten reboot abgezogen:Spoiler--------------------------------------------------------------------------------
| U-Boot 2009.08-00068-g69a4049 (Dec 10 2015 - 14:38:00) CST HDx |
|------------------------------------------------------------------------------|
| Chipset information |
| Vendor: NXP Type: Shiner-IP Revision: M1 Fuses: 00156F69 |
|------------------------------------------------------------------------------|
| Clock information |
| *** not available yet *** |
|------------------------------------------------------------------------------|
| Frontpanel information |
| Vendor: CST Version: 5.1 Display: none |
|------------------------------------------------------------------------------|
| Memory configuration |
| Start | End | Type | Description |
|----------+----------+---------+----------------------------------------------|
| 00000000 | 0FFFFFFF | RAM | System main memory bank #0 (256M) |
| 20000000 | 2FFFFFFF | RAM | System main memory bank #1 (256M) |
| D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 ( 4M / 64K x 64) |
*** Warning - bad CRC or SFC, using default environment
| 00000000*| 1FFFFFFF*| NAND | Toshiba NAND 512MiB 3,3V 8-bit |
|------------------------------------------------------------------------------|
| Network configuration |
| MAC: LIP 6300 address: 00-C5-5C-5E-AC-2A |
--------------------------------------------------------------------------------Hit any key to stop autoboot: 3
Emergency update from usb
(Re)start USB...
USB: Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
reading uldr.bin55640 bytes read
SFC erase: offset 0x0, size 0x40000
OKSFC write: offset 0x0, size 0x40000
262144 bytes written: OK
reading u-boot.bin347008 bytes read
SFC erase: offset 0x40000, size 0x80000
OKSFC write: offset 0x40000, size 0x80000
524288 bytes written: OK
reading env.bin0 bytes read
SFC erase: offset 0xc0000, size 0x20000
OKSFC write: offset 0xc0000, size 0x20000
131072 bytes written: OK
reading vmlinux.ub.gz3044992 bytes read
SFC erase: offset 0x100000, size 0x300000
OKSFC write: offset 0x100000, size 0x300000
3145728 bytes written: OK
reading rootfs.arm.jffs2.nand36113564 bytes read
NAND erase: device 0 offset 0x0, size 0x10000000
Bad block table found at page 262080, version 0x01
Bad block table found at page 262016, version 0x01
Erasing at 0xffe0000 -- 100% complete.
OKNAND write: device 0 offset 0x0, size 0x2270c9c
36113564 bytes written: OK** Invalid boot device **
** Skipping rootfs1.arm.jffs2.nand **** Invalid boot device **
** Skipping var.arm.jffs2.nand **
resetting ...
Starting Microloader ASM built on Mar 28 2016 17:59:53...
Initializing PLLs...
Initializing Clocks..
Initializing DDR PLLs/Clocks...
Initializing DDR controller...
Initializing data section...
Initializing stack ptr...
Switching to 'C' code...
Starting Microloader C...
Chip: SHINER-IP
Found Internal Ethernet PHY on GMAC0....
Checking for Guide button press ...
GCS in ISA MODE
GCS: SFC DEVICE SETUP COMPLETE
MMC:No device found
BOX MAC OK!
BOX: Type: TRINITY Rev: 84700102
Setting up default ATAG list...
Jumping to U-Boot ...
BOOT_TIME: 729 ms since POR
--------------------------------------------------------------------------------
| U-Boot 2009.08-00068-g69a4049 (Dec 10 2015 - 14:38:00) CST HDx |
|------------------------------------------------------------------------------|
| Chipset information |
| Vendor: NXP Type: Shiner-IP Revision: M1 Fuses: 00156F69 |
|------------------------------------------------------------------------------|
| Clock information |
| *** not available yet *** |
|------------------------------------------------------------------------------|
| Frontpanel information |
| Vendor: CST Version: 5.1 Display: none |
|------------------------------------------------------------------------------|
| Memory configuration |
| Start | End | Type | Description |
|----------+----------+---------+----------------------------------------------|
| 00000000 | 0FFFFFFF | RAM | System main memory bank #0 (256M) |
| 20000000 | 2FFFFFFF | RAM | System main memory bank #1 (256M) |
| D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 ( 4M / 64K x 64) |
*** Warning - bad CRC or SFC, using default environment
| 00000000*| 1FFFFFFF*| NAND | Toshiba NAND 512MiB 3,3V 8-bit |
|------------------------------------------------------------------------------|
| Network configuration |
| MAC: LIP 6300 address: 00-C5-5C-5E-AC-2A |
--------------------------------------------------------------------------------Hit any key to stop autoboot: 0
SFC read: offset 0x100000, size 0x300000
3145728 bytes read: OK
## Booting kernel from Legacy Image at 01000000 ...
Image Name: Coolstream Kernel (compressed)
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3044928 Bytes = 2.9 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.10.93 (image@server) (gcc version 6.3.1 20170109 (crosstool-NG 1) ) #1 SMP Wed Apr 18 11:46:15 CEST 2018
[ 0.000000] CPU: ARMv7 Processor [411fc091] revision 1 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Entropic Apollo STB Platform with FDT, model: CoolStream HD2 Apollo STB
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] Early platform io descriptors mapping...
[ 0.000000] PERCPU: Embedded 7 pages/cpu @8090e000 s5952 r8192 d14528 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: noinitrd console=ttyS0,115200n8 mtdparts=e0632000.flash_sfc:256k@0k(uldr),512k@256k(u-boot),128k@768k(env),128k@896k(spare),-(kernel);e0631000.flash_nand:256m@0k(root0),32m@256m(var),-(root1) root=mtd:root0 rootfstype=jffs2 rw
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 256MB 256MB = 512MB total
[ 0.000000] Memory: 246968k/246968k available, 277320k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
[ 0.000000] lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x80008000 - 0x80676d30 (6588 kB)
[ 0.000000] .init : 0x80677000 - 0x806a6740 ( 190 kB)
[ 0.000000] .data : 0x806a8000 - 0x806e9de0 ( 264 kB)
[ 0.000000] .bss : 0x806e9de0 - 0x80705364 ( 110 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU debugfs-based tracing is enabled.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:388
[ 0.000000] GIC CPU mask not found - kernel will fail to boot.
[ 0.000000] GIC CPU mask not found - kernel will fail to boot.
[ 0.000000] smp_twd: clock not found -2
[ 0.000000] Unable to get timer clock. Assuming 50Mhz input clock.
[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[ 0.000000] stb-timer: system timer (irq = 58, rate 50000000)
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [ttyS0] enabled
[ 0.250497] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
[ 0.342789] pid_max: default: 32768 minimum: 301
[ 0.347624] Mount-cache hash table entries: 512
[ 0.354176] CPU: Testing write buffer coherency: ok
[ 0.359315] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.364961] Setting up static identity map for 0x803dab08 - 0x803dab60
[ 0.371512] L310 cache controller enabled
[ 0.375432] l2x0: 8 ways, CACHE_ID 0x410004c4, AUX_CTRL 0x32421001, Cache size: 131072 B
[ 0.384144] Brought up 1 CPUs
[ 0.387018] SMP: Total of 1 processors activated (1196.85 BogoMIPS).
[ 0.393344] CPU: All CPU(s) started in SVC mode.
[ 0.398712] devtmpfs: initialized
[ 0.409007] NET: Registered protocol family 16
[ 0.414095] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.551125] GMAC0: active interface is 1
[ 0.555134] ChipID=0x3 ChipRevID=0x2
[ 0.558760] nx_dmac: Registered with 8 channels
[ 0.588135] bio: create slab <bio-0> at 0
[ 0.593593] GPIO: base febd5000 (phys e06d5000)
[ 0.598234] GPIO: base feb69000 (phys e0669000)
[ 0.604707] SCSI subsystem initialized
[ 0.609838] usbcore: registered new interface driver usbfs
[ 0.615546] usbcore: registered new interface driver hub
[ 0.621251] usbcore: registered new device driver usb
[ 0.626732] pps_core: LinuxPPS API ver. 1 registered
[ 0.631665] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.640893] PTP clock support registered
[ 0.646914] cfg80211: Calling CRDA to update world regulatory domain
[ 0.654778] Switching to clocksource timer_us
[ 0.679553] NET: Registered protocol family 2
[ 0.684743] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.691821] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.698227] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.704552] TCP: reno registered
[ 0.707698] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.713544] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.719981] NET: Registered protocol family 1
[ 0.724625] RPC: Registered named UNIX socket transport module.
[ 0.730519] RPC: Registered udp transport module.
[ 0.735119] RPC: Registered tcp transport module.
[ 0.739785] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.746384] PM: STB Platform power mgmt initialization.
[ 0.876259] bounce pool size: 64 pages
[ 0.895151] NFS: Registering the id_resolver key type
[ 0.900223] Key type id_resolver registered
[ 0.904309] Key type id_legacy registered
[ 0.908298] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.914748] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.922610] msgmni has been set to 482
[ 0.927745] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.935126] io scheduler noop registered
[ 0.938947] io scheduler deadline registered
[ 0.944130] io scheduler cfq registered (default)
[ 0.949458] e06e2000.serial: ttyS0 at MMIO 0xe06e2000 (irq = 47) is a uart-ip3106
[ 0.964713] loop: module loaded
[ 0.968924] ahci-stb e0638000.sata: unable to find phy
[ 0.974055] SATA: Adjusting los_lvl (rd_val=0x8a46, wr_val=0x8ae6)
[ 0.980146] SATA: Adjusting rx_term_en0/1 (rd_val=0x2750275, wr_val=0x2770277)
[ 0.987345] ahci-stb e0638000.sata: SSS flag set, parallel bus scan disabled
[ 0.994350] ahci-stb e0638000.sata: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl platform mode
[ 1.003129] ahci-stb e0638000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc sxs
[ 1.014514] scsi0 : ahci_platform
[ 1.018387] scsi1 : ahci_platform
[ 1.022303] ata1: SATA max UDMA/133 mmio [mem 0xe0638000-0xe0638fff] port 0x100 irq 39
[ 1.030149] ata2: SATA max UDMA/133 mmio [mem 0xe0638000-0xe0638fff] port 0x180 irq 39
[ 1.039830] NAND device: Manufacturer ID: 0x98, Chip ID: 0xdc (Toshiba NAND 512MiB 3,3V 8-bit), 512MiB, page size: 2048, OOB size: 64
[ 1.052210] Bad block table found at page 262080, version 0x01
[ 1.058316] Bad block table found at page 262016, version 0x01
[ 1.064427] 3 cmdlinepart partitions found on MTD device e0631000.flash_nand
[ 1.071397] Creating 3 MTD partitions on "e0631000.flash_nand":
[ 1.077245] 0x000000000000-0x000010000000 : "root0"
[ 1.083989] 0x000010000000-0x000012000000 : "var"
[ 1.090212] 0x000012000000-0x000020000000 : "root1"
[ 1.098690] JEDEC ID = 0x1c3016 , Extended Device ID = 0x1c30
[ 1.104506] nx_sfc e0632000.flash_sfc: en25q32 (4096 Kbytes)
[ 1.110088] 5 cmdlinepart partitions found on MTD device e0632000.flash_sfc
[ 1.116966] Creating 5 MTD partitions on "e0632000.flash_sfc":
[ 1.122774] 0x000000000000-0x000000040000 : "uldr"
[ 1.129250] 0x000000040000-0x0000000c0000 : "u-boot"
[ 1.135804] 0x0000000c0000-0x0000000e0000 : "env"
[ 1.142322] 0x0000000e0000-0x000000100000 : "spare"
[ 1.148694] 0x000000100000-0x000000400000 : "kernel"
[ 1.156045] tun: Universal TUN/TAP device driver, 1.6
[ 1.161078] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.167771] DWMAC1000
[ 1.170091] stmmac - user ID: 0x25, Synopsys ID: 0x35
[ 1.175059] Ring mode enabled
[ 1.178084] DMA HW capability register supported
[ 1.182588] Enhanced/Alternate descriptors
[ 1.186895] Enabled extended descriptors
[ 1.190882] RX Checksum Offload Engine supported (type 2)
[ 1.196313] TX Checksum insertion supported
[ 1.200555] Wake-Up On Lan supported
[ 1.204213] Enable RX Mitigation via HW Watchdog Timer
[ 1.225218] libphy: stmmac: probed
[ 1.228531] eth0: PHY ID 0293c411 at 0 IRQ POLL (stmmac-0:00) active
[ 1.234923] eth0: PHY ID 00000000 at 1 IRQ POLL (stmmac-0:01)
[ 1.240598] eth0: PHY ID 00000000 at 2 IRQ POLL (stmmac-0:02)
[ 1.246266] eth0: PHY ID 00000000 at 3 IRQ POLL (stmmac-0:03)
[ 1.251993] eth0: PHY ID 00000000 at 4 IRQ POLL (stmmac-0:04)
[ 1.257670] eth0: PHY ID 00000000 at 5 IRQ POLL (stmmac-0:05)
[ 1.263399] eth0: PHY ID 00000000 at 6 IRQ POLL (stmmac-0:06)
[ 1.269075] eth0: PHY ID 00000000 at 7 IRQ POLL (stmmac-0:07)
[ 1.274808] eth0: PHY ID 00000000 at 8 IRQ POLL (stmmac-0:08)
[ 1.280507] eth0: PHY ID 00000000 at 9 IRQ POLL (stmmac-0:09)
[ 1.286182] eth0: PHY ID 00000000 at 10 IRQ POLL (stmmac-0:0a)
[ 1.291996] eth0: PHY ID 00000000 at 11 IRQ POLL (stmmac-0:0b)
[ 1.297759] eth0: PHY ID 00000000 at 12 IRQ POLL (stmmac-0:0c)
[ 1.303573] eth0: PHY ID 00000000 at 13 IRQ POLL (stmmac-0:0d)
[ 1.309337] eth0: PHY ID 00000000 at 14 IRQ POLL (stmmac-0:0e)
[ 1.315152] eth0: PHY ID 00000000 at 15 IRQ POLL (stmmac-0:0f)
[ 1.320937] eth0: PHY ID 00000000 at 16 IRQ POLL (stmmac-0:10)
[ 1.326703] eth0: PHY ID 00000000 at 17 IRQ POLL (stmmac-0:11)
[ 1.332520] eth0: PHY ID 00000000 at 18 IRQ POLL (stmmac-0:12)
[ 1.338281] eth0: PHY ID 00000000 at 19 IRQ POLL (stmmac-0:13)
[ 1.344094] eth0: PHY ID 00000000 at 20 IRQ POLL (stmmac-0:14)
[ 1.349858] eth0: PHY ID 00000000 at 21 IRQ POLL (stmmac-0:15)
[ 1.355672] eth0: PHY ID 00000000 at 22 IRQ POLL (stmmac-0:16)
[ 1.361460] eth0: PHY ID 00000000 at 23 IRQ POLL (stmmac-0:17)
[ 1.367225] eth0: PHY ID 00000000 at 24 IRQ POLL (stmmac-0:18)
[ 1.373037] eth0: PHY ID 00000000 at 25 IRQ POLL (stmmac-0:19)
[ 1.378802] eth0: PHY ID 00000000 at 26 IRQ POLL (stmmac-0:1a)
[ 1.384617] eth0: PHY ID 00000000 at 27 IRQ POLL (stmmac-0:1b)
[ 1.390401] eth0: PHY ID 00000000 at 28 IRQ POLL (stmmac-0:1c)
[ 1.396168] eth0: PHY ID 00000000 at 29 IRQ POLL (stmmac-0:1d)
[ 1.401985] eth0: PHY ID 00000000 at 30 IRQ POLL (stmmac-0:1e)
[ 1.407746] eth0: PHY ID 00000000 at 31 IRQ POLL (stmmac-0:1f)
[ 1.414066] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.420528] ehci-platform: EHCI generic platform driver
[ 1.425782] ehci-platform e066c000.usb: EHCI Host Controller
[ 1.431385] ehci-platform e066c000.usb: new USB bus registered, assigned bus number 1
[ 1.439241] ehci-platform e066c000.usb: irq 93, io mem 0xe066c000
[ 1.460121] ehci-platform e066c000.usb: USB 2.0 started, EHCI 1.00
[ 1.466290] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.473014] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.480167] usb usb1: Product: EHCI Host Controller
[ 1.484980] usb usb1: Manufacturer: Linux 3.10.93 ehci_hcd
[ 1.490445] usb usb1: SerialNumber: e066c000.usb
[ 1.495969] hub 1-0:1.0: USB hub found
[ 1.499644] hub 1-0:1.0: 1 port detected
[ 1.503811] ehci-platform e066d000.usb: EHCI Host Controller
[ 1.509382] ehci-platform e066d000.usb: new USB bus registered, assigned bus number 2
[ 1.517330] ehci-platform e066d000.usb: irq 94, io mem 0xe066d000
[ 1.523432] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.540092] ehci-platform e066d000.usb: USB 2.0 started, EHCI 1.00
[ 1.546250] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.552962] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.560110] usb usb2: Product: EHCI Host Controller
[ 1.564935] usb usb2: Manufacturer: Linux 3.10.93 ehci_hcd
[ 1.570389] usb usb2: SerialNumber: e066d000.usb
[ 1.575900] hub 2-0:1.0: USB hub found
[ 1.579582] hub 2-0:1.0: 1 port detected
[ 1.584295] usbcore: registered new interface driver usb-storage
[ 1.590742] usbcore: registered new interface driver usbserial
[ 1.598054] sdhci: Secure Digital Host Controller Interface driver
[ 1.604219] sdhci: Copyright(c) Pierre Ossman
[ 1.608561] stb-sdhci e0635000.sdhci: SDHC/MMC controller IP_3413 Version is 0x75
[ 1.616053] stb-sdhci e0635000.sdhci: SDHC/MMC controller IP_3413 found @ [feb35000] (rev 7501)
[ 1.660085] mmc0: SDHCI controller on IP_3413 [e0635000.sdhci] using ADMA
[ 1.668709] usbcore: registered new interface driver usbhid
[ 1.674222] usbhid: USB HID core driver
[ 1.678269] TCP: cubic registered
[ 1.681548] NET: Registered protocol family 17
[ 1.686367] Key type dns_resolver registered
[ 1.690698] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
[ 1.698240] ThumbEE CPU extension supported.
[ 1.703634] ### dt-test ### No testcase data in device tree; not running tests
[ 1.900096] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.390093] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 2.541486] usb 1-1: New USB device found, idVendor=090c, idProduct=2000
[ 2.548102] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.555193] usb 1-1: Product: Intenso Ultra Line
[ 2.559746] usb 1-1: Manufacturer: SMI
[ 2.563470] usb 1-1: SerialNumber: CCYYMMDDHHmmSSYZ
[ 2.569716] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 2.576092] scsi2 : usb-storage 1-1:1.0
[ 3.638901] scsi 2:0:0:0: Direct-Access Intenso Ultra Line 1100 PQ: 0 ANSI: 6
[ 3.649558] sd 2:0:0:0: [sda] 62545920 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 3.657376] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 3.663221] sd 2:0:0:0: [sda] Write Protect is off
[ 3.669072] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.682818] sda: sda1
[ 3.688412] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 4.599720] VFS: Mounted root (jffs2 filesystem) on device 31:0.
[ 4.606244] devtmpfs: mounted
[ 4.609382] Freeing unused kernel memory: 188K (80677000 - 806a6000)
init started: BusyBox v1.30.1 (2019-06-13 22:54:12 CEST)
[ 5.179280] NET: Registered protocol family 10
move /var to /tmp/var_init
try to mount /dev/mtdblock1 to /var
do first run @startup !!
+ CFGFILE=/var/tuxbox/config/kwupdate.conf
+ UPDFILE=new-versions.txt
+ read -r line
+ cut '-d;' -f2
+ echo 'S;operations;operations;027;'
+ DESC=operations
+ echo 'S;operations;operations;027;' operations
S;operations;operations;027; operations
+ sed -i -e '/;operations;/d' /var/tuxbox/config/kwupdate.conf
+ echo 'S;operations;operations;027;'
+ read -r line
+ cut '-d;' -f2
+ echo 'S;asc2uni;asc2uni;0.02;10000000;201001010000;;;;'
+ DESC=asc2uni
+ echo 'S;asc2uni;asc2uni;0.02;10000000;201001010000;;;;' asc2uni
S;asc2uni;asc2uni;0.02;10000000;201001010000;;;; asc2uni
+ sed -i -e '/;asc2uni;/d' /var/tuxbox/config/kwupdate.conf
+ echo 'S;asc2uni;asc2uni;0.02;10000000;201001010000;;;;'
+ read -r line
+ cut '-d;' -f2
+ echo 'S;fbres;FBresolution;0.2;10000000;201001010000;;;;'
+ DESC=fbres
+ echo 'S;fbres;FBresolution;0.2;10000000;201001010000;;;;' fbres
S;fbres;FBresolution;0.2;10000000;201001010000;;;; fbres
+ sed -i -e '/;fbres;/d' /var/tuxbox/config/kwupdate.conf
+ echo 'S;fbres;FBresolution;0.2;10000000;201001010000;;;;'
+ read -r line
+ + echo 'S;kwupdate;kwupdate;1.7;;;;;;'
cut '-d;' -f2
+ DESC=kwupdate
+ echo 'S;kwupdate;kwupdate;1.7;;;;;;' kwupdate
S;kwupdate;kwupdate;1.7;;;;;; kwupdate
+ sed -i -e '/;kwupdate;/d' /var/tuxbox/config/kwupdate.conf
+ echo 'S;kwupdate;kwupdate;1.7;;;;;;'
+ read -r line
+ cut '-d;' -f2
+ echo 'S;input;Input;2.13;10000000;201001010000;;;;'
+ DESC=input
+ echo 'S;input;Input;2.13;10000000;201001010000;;;;' input
S;input;Input;2.13;10000000;201001010000;;;; input
+ sed -i -e '/;input;/d' /var/tuxbox/config/kwupdate.conf
+ echo 'S;input;Input;2.13;10000000;201001010000;;;;'
+ read -r line
+ cut '-d;' -f2
+ echo 'S;msgbox;Messagebox;2.13;10000000;201001010000;;;;'
+ DESC=msgbox
+ echo 'S;msgbox;Messagebox;2.13;10000000;201001010000;;;;' msgbox
S;msgbox;Messagebox;2.13;10000000;201001010000;;;; msgbox
+ sed -i -e '/;msgbox;/d' /var/tuxbox/config/kwupdate.conf
+ echo 'S;msgbox;Messagebox;2.13;10000000;201001010000;;;;'
+ read -r line
+ cut '-d;' -f2
+ echo 'S;shellexec;Flex-Men~u;2.15;10000000;201001010000;;;;'
+ DESC=shellexec
+ echo 'S;shellexec;Flex-Men~u;2.15;10000000;201001010000;;;;' shellexec
S;shellexec;Flex-Men~u;2.15;10000000;201001010000;;;; shellexec
+ sed -i -e '/;shellexec;/d' /var/tuxbox/config/kwupdate.conf
+ echo 'S;shellexec;Flex-Men~u;2.15;10000000;201001010000;;;;'
+ read -r line
+ exit 0
+ WEBTVTARGET=/var/tuxbox/webtv
+ WEBRADIOTARGET=/var/tuxbox/webradio
+ PTARGET=/var/plugins
+ WTARGET=/var/tuxbox
+ FTARGET=/var/tuxbox/config
+ UPFILES_CFG=/tmp/var_init/update2/config
+ UPFILES_ETC=/tmp/var_init/update2/etc
+ pwd
+ DIR=/
+ cd /tmp/var_init/update2/config
+ '[' '!' -e /var/tuxbox/config/cables.xml ]
+ '[' '!' -e /var/tuxbox/config/movieplayer.start ]
+ '[' '!' -e /var/tuxbox/config/movieplayer.stop ]
+ '[' '!' -e /var/tuxbox/config/recording.end ]
+ '[' '!' -e /var/tuxbox/config/recording.start ]
+ '[' '!' -e /var/tuxbox/config/recording.timer ]
+ '[' '!' -e /var/tuxbox/config/satellites.xml ]
+ '[' '!' -e /var/tuxbox/config/standby.off ]
+ '[' '!' -e /var/tuxbox/config/standby.on ]
+ cp -f cables.xml /var/tuxbox/config/
+ cp -f satellites.xml /var/tuxbox/config/
+ cd ..
+ cp -f kwupdate /var/plugins/
+ mkdir -p /var/tuxbox/webtv
+ mkdir -p /var/tuxbox/webradio
+ cd webtv
+ '[' '!' -e /var/tuxbox/webtv/webtv_usr.xml ]
+ '[' '!' -e /var/tuxbox/webtv/yt_live.xml ]
+ cp -f LocalTVEpg.lua best_bitrate_m3u8.lua yt_live.lua /var/tuxbox/webtv
+ cd ..
+ cd webradio
+ '[' '!' -e /var/tuxbox/webradio/webradio_usr.xml ]
+ cd ..
+ '[' '!' -e /var/etc/auto.master ]
+ cd /
+ exit 0
starting /etc/init.d/S02loadmodules ...
Sat Jan 1 00:00:00 CET 2000
Updating u-boot on device mtd4 .....
libmtd: error!: ECCGETLAYOUT ioctl request failed
error 25 (Inappropriate ioctl for device)
Erasing 64 Kibyte @ 70000 -- 100 % complete
Updating loader on device mtd3 .....
libmtd: error!: ECCGETLAYOUT ioctl request failed
error 25 (Inappropriate ioctl for device)
Erasing 64 Kibyte @ 30000 -- 100 % complete
Skipping Kernel Update
Reboot...
[ 13.356217] Restarting system.
�Starting Microloader ASM built on Mar 28 2016 17:59:53...
Initializing PLLs...
Initializing Clocks..
Initializing DDR PLLs/Clocks...
Initializing DDR controller...
Initializing data section...
Initializing stack ptr...
Switching to 'C' code...
Starting Microloader C...
Chip: SHINER-IP
Found Internal Ethernet PHY on GMAC0....
Checking for Guide button press ...
GCS in ISA MODE
GCS: SFC DEVICE SETUP COMPLETE
MMC:No device found
BOX MAC OK!
BOX: Type: TRINITY Rev: 84700102
Setting up default ATAG list...
Jumping to U-Boot ...
BOOT_TIME: 729 ms since POR--------------------------------------------------------------------------------
| U-Boot 2009.08-00068-g69a4049 (Dec 10 2015 - 14:38:00) CST HDx |
|------------------------------------------------------------------------------|
| Chipset information |
| Vendor: NXP Type: Shiner-IP Revision: M1 Fuses: 00156F69 |
|------------------------------------------------------------------------------|
| Clock information |
| *** not available yet *** |
|------------------------------------------------------------------------------|
| Frontpanel information |
| Vendor: CST Version: 5.1 Display: none |
|------------------------------------------------------------------------------|
| Memory configuration |
| Start | End | Type | Description |
|----------+----------+---------+----------------------------------------------|
| 00000000 | 0FFFFFFF | RAM | System main memory bank #0 (256M) |
| 20000000 | 2FFFFFFF | RAM | System main memory bank #1 (256M) |
| D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 ( 4M / 64K x 64) |
*** Warning - bad CRC or SFC, using default environment
| 00000000*| 1FFFFFFF*| NAND | Toshiba NAND 512MiB 3,3V 8-bit |
|------------------------------------------------------------------------------|
| Network configuration |
| MAC: LIP 6300 address: 00-C5-5C-5E-AC-2A |
--------------------------------------------------------------------------------Hit any key to stop autoboot: 0
SFC read: offset 0x100000, size 0x300000
3145728 bytes read: OK
## Booting kernel from Legacy Image at 01000000 ...
Image Name: Coolstream Kernel (compressed)
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3044928 Bytes = 2.9 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.10.93 (image@server) (gcc version 6.3.1 20170109 (crosstool-NG 1) ) #1 SMP Wed Apr 18 11:46:15 CEST 2018
[ 0.000000] CPU: ARMv7 Processor [411fc091] revision 1 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Entropic Apollo STB Platform with FDT, model: CoolStream HD2 Apollo STB
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] Early platform io descriptors mapping...
[ 0.000000] PERCPU: Embedded 7 pages/cpu @8090e000 s5952 r8192 d14528 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: noinitrd console=ttyS0,115200n8 mtdparts=e0632000.flash_sfc:256k@0k(uldr),512k@256k(u-boot),128k@768k(env),128k@896k(spare),-(kernel);e0631000.flash_nand:256m@0k(root0),32m@256m(var),-(root1) root=mtd:root0 rootfstype=jffs2 rw
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 256MB 256MB = 512MB total
[ 0.000000] Memory: 246968k/246968k available, 277320k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
[ 0.000000] lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x80008000 - 0x80676d30 (6588 kB)
[ 0.000000] .init : 0x80677000 - 0x806a6740 ( 190 kB)
[ 0.000000] .data : 0x806a8000 - 0x806e9de0 ( 264 kB)
[ 0.000000] .bss : 0x806e9de0 - 0x80705364 ( 110 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU debugfs-based tracing is enabled.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:388
[ 0.000000] GIC CPU mask not found - kernel will fail to boot.
[ 0.000000] GIC CPU mask not found - kernel will fail to boot.
[ 0.000000] smp_twd: clock not found -2
[ 0.000000] Unable to get timer clock. Assuming 50Mhz input clock.
[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[ 0.000000] stb-timer: system timer (irq = 58, rate 50000000)
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [ttyS0] enabled
[ 0.250501] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
[ 0.342788] pid_max: default: 32768 minimum: 301
[ 0.347624] Mount-cache hash table entries: 512
[ 0.354179] CPU: Testing write buffer coherency: ok
[ 0.359315] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.364959] Setting up static identity map for 0x803dab08 - 0x803dab60
[ 0.371511] L310 cache controller enabled
[ 0.375431] l2x0: 8 ways, CACHE_ID 0x410004c4, AUX_CTRL 0x32421001, Cache size: 131072 B
[ 0.384138] Brought up 1 CPUs
[ 0.387016] SMP: Total of 1 processors activated (1196.85 BogoMIPS).
[ 0.393344] CPU: All CPU(s) started in SVC mode.
[ 0.398703] devtmpfs: initialized
[ 0.409016] NET: Registered protocol family 16
[ 0.414102] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.551088] GMAC0: active interface is 1
[ 0.555094] ChipID=0x3 ChipRevID=0x2
[ 0.558715] nx_dmac: Registered with 8 channels
[ 0.588006] bio: create slab <bio-0> at 0
[ 0.593443] GPIO: base febd5000 (phys e06d5000)
[ 0.598082] GPIO: base feb69000 (phys e0669000)
[ 0.604555] SCSI subsystem initialized
[ 0.609702] usbcore: registered new interface driver usbfs
[ 0.615403] usbcore: registered new interface driver hub
[ 0.621128] usbcore: registered new device driver usb
[ 0.626604] pps_core: LinuxPPS API ver. 1 registered
[ 0.631534] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.640766] PTP clock support registered
[ 0.646785] cfg80211: Calling CRDA to update world regulatory domain
[ 0.654662] Switching to clocksource timer_us
[ 0.679334] NET: Registered protocol family 2
[ 0.684586] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.691658] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.698062] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.704384] TCP: reno registered
[ 0.707524] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.713370] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.719807] NET: Registered protocol family 1
[ 0.724460] RPC: Registered named UNIX socket transport module.
[ 0.730352] RPC: Registered udp transport module.
[ 0.734954] RPC: Registered tcp transport module.
[ 0.739620] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.746215] PM: STB Platform power mgmt initialization.
[ 0.876066] bounce pool size: 64 pages
[ 0.894961] NFS: Registering the id_resolver key type
[ 0.899965] Key type id_resolver registered
[ 0.904148] Key type id_legacy registered
[ 0.908072] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.914518] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.922367] msgmni has been set to 482
[ 0.927517] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.934893] io scheduler noop registered
[ 0.938721] io scheduler deadline registered
[ 0.943902] io scheduler cfq registered (default)
[ 0.949233] e06e2000.serial: ttyS0 at MMIO 0xe06e2000 (irq = 47) is a uart-ip3106
[ 0.964483] loop: module loaded
[ 0.968685] ahci-stb e0638000.sata: unable to find phy
[ 0.973819] SATA: Adjusting los_lvl (rd_val=0x8a46, wr_val=0x8ae6)
[ 0.979892] SATA: Adjusting rx_term_en0/1 (rd_val=0x2750275, wr_val=0x2770277)
[ 0.987126] ahci-stb e0638000.sata: SSS flag set, parallel bus scan disabled
[ 0.994117] ahci-stb e0638000.sata: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl platform mode
[ 1.002894] ahci-stb e0638000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc sxs
[ 1.014291] scsi0 : ahci_platform
[ 1.018170] scsi1 : ahci_platform
[ 1.022293] ata1: SATA max UDMA/133 mmio [mem 0xe0638000-0xe0638fff] port 0x100 irq 39
[ 1.030180] ata2: SATA max UDMA/133 mmio [mem 0xe0638000-0xe0638fff] port 0x180 irq 39
[ 1.039964] NAND device: Manufacturer ID: 0x98, Chip ID: 0xdc (Toshiba NAND 512MiB 3,3V 8-bit), 512MiB, page size: 2048, OOB size: 64
[ 1.052208] Bad block table found at page 262080, version 0x01
[ 1.058301] Bad block table found at page 262016, version 0x01
[ 1.064404] 3 cmdlinepart partitions found on MTD device e0631000.flash_nand
[ 1.071367] Creating 3 MTD partitions on "e0631000.flash_nand":
[ 1.077217] 0x000000000000-0x000010000000 : "root0"
[ 1.083945] 0x000010000000-0x000012000000 : "var"
[ 1.090160] 0x000012000000-0x000020000000 : "root1"
[ 1.098630] JEDEC ID = 0x1c3016 , Extended Device ID = 0x1c30
[ 1.104447] nx_sfc e0632000.flash_sfc: en25q32 (4096 Kbytes)
[ 1.110020] 5 cmdlinepart partitions found on MTD device e0632000.flash_sfc
[ 1.116930] Creating 5 MTD partitions on "e0632000.flash_sfc":
[ 1.122718] 0x000000000000-0x000000040000 : "uldr"
[ 1.129193] 0x000000040000-0x0000000c0000 : "u-boot"
[ 1.135734] 0x0000000c0000-0x0000000e0000 : "env"
[ 1.142270] 0x0000000e0000-0x000000100000 : "spare"
[ 1.148640] 0x000000100000-0x000000400000 : "kernel"
[ 1.155999] tun: Universal TUN/TAP device driver, 1.6
[ 1.161037] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.167721] DWMAC1000
[ 1.169998] stmmac - user ID: 0x25, Synopsys ID: 0x35
[ 1.175046] Ring mode enabled
[ 1.178031] DMA HW capability register supported
[ 1.182535] Enhanced/Alternate descriptors
[ 1.186842] Enabled extended descriptors
[ 1.190829] RX Checksum Offload Engine supported (type 2)
[ 1.196260] TX Checksum insertion supported
[ 1.200502] Wake-Up On Lan supported
[ 1.204160] Enable RX Mitigation via HW Watchdog Timer
[ 1.225135] libphy: stmmac: probed
[ 1.228452] eth0: PHY ID 0293c411 at 0 IRQ POLL (stmmac-0:00) active
[ 1.234830] eth0: PHY ID 00000000 at 1 IRQ POLL (stmmac-0:01)
[ 1.240481] eth0: PHY ID 00000000 at 2 IRQ POLL (stmmac-0:02)
[ 1.246169] eth0: PHY ID 00000000 at 3 IRQ POLL (stmmac-0:03)
[ 1.251882] eth0: PHY ID 00000000 at 4 IRQ POLL (stmmac-0:04)
[ 1.257573] eth0: PHY ID 00000000 at 5 IRQ POLL (stmmac-0:05)
[ 1.263285] eth0: PHY ID 00000000 at 6 IRQ POLL (stmmac-0:06)
[ 1.268978] eth0: PHY ID 00000000 at 7 IRQ POLL (stmmac-0:07)
[ 1.274693] eth0: PHY ID 00000000 at 8 IRQ POLL (stmmac-0:08)
[ 1.280393] eth0: PHY ID 00000000 at 9 IRQ POLL (stmmac-0:09)
[ 1.286086] eth0: PHY ID 00000000 at 10 IRQ POLL (stmmac-0:0a)
[ 1.291881] eth0: PHY ID 00000000 at 11 IRQ POLL (stmmac-0:0b)
[ 1.297663] eth0: PHY ID 00000000 at 12 IRQ POLL (stmmac-0:0c)
[ 1.303459] eth0: PHY ID 00000000 at 13 IRQ POLL (stmmac-0:0d)
[ 1.309240] eth0: PHY ID 00000000 at 14 IRQ POLL (stmmac-0:0e)
[ 1.315037] eth0: PHY ID 00000000 at 15 IRQ POLL (stmmac-0:0f)
[ 1.320825] eth0: PHY ID 00000000 at 16 IRQ POLL (stmmac-0:10)
[ 1.326607] eth0: PHY ID 00000000 at 17 IRQ POLL (stmmac-0:11)
[ 1.332402] eth0: PHY ID 00000000 at 18 IRQ POLL (stmmac-0:12)
[ 1.338184] eth0: PHY ID 00000000 at 19 IRQ POLL (stmmac-0:13)
[ 1.343980] eth0: PHY ID 00000000 at 20 IRQ POLL (stmmac-0:14)
[ 1.349762] eth0: PHY ID 00000000 at 21 IRQ POLL (stmmac-0:15)
[ 1.355559] eth0: PHY ID 00000000 at 22 IRQ POLL (stmmac-0:16)
[ 1.361347] eth0: PHY ID 00000000 at 23 IRQ POLL (stmmac-0:17)
[ 1.367127] eth0: PHY ID 00000000 at 24 IRQ POLL (stmmac-0:18)
[ 1.372925] eth0: PHY ID 00000000 at 25 IRQ POLL (stmmac-0:19)
[ 1.378706] eth0: PHY ID 00000000 at 26 IRQ POLL (stmmac-0:1a)
[ 1.384502] eth0: PHY ID 00000000 at 27 IRQ POLL (stmmac-0:1b)
[ 1.390291] eth0: PHY ID 00000000 at 28 IRQ POLL (stmmac-0:1c)
[ 1.396072] eth0: PHY ID 00000000 at 29 IRQ POLL (stmmac-0:1d)
[ 1.401868] eth0: PHY ID 00000000 at 30 IRQ POLL (stmmac-0:1e)
[ 1.407649] eth0: PHY ID 00000000 at 31 IRQ POLL (stmmac-0:1f)
[ 1.413720] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.420343] ehci-platform: EHCI generic platform driver
[ 1.425572] ehci-platform e066c000.usb: EHCI Host Controller
[ 1.431211] ehci-platform e066c000.usb: new USB bus registered, assigned bus number 1
[ 1.439056] ehci-platform e066c000.usb: irq 93, io mem 0xe066c000
[ 1.460128] ehci-platform e066c000.usb: USB 2.0 started, EHCI 1.00
[ 1.466300] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.473026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.480175] usb usb1: Product: EHCI Host Controller
[ 1.484989] usb usb1: Manufacturer: Linux 3.10.93 ehci_hcd
[ 1.490452] usb usb1: SerialNumber: e066c000.usb
[ 1.496016] hub 1-0:1.0: USB hub found
[ 1.499696] hub 1-0:1.0: 1 port detected
[ 1.503867] ehci-platform e066d000.usb: EHCI Host Controller
[ 1.509441] ehci-platform e066d000.usb: new USB bus registered, assigned bus number 2
[ 1.517389] ehci-platform e066d000.usb: irq 94, io mem 0xe066d000
[ 1.523486] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.540093] ehci-platform e066d000.usb: USB 2.0 started, EHCI 1.00
[ 1.546248] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.552962] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.560109] usb usb2: Product: EHCI Host Controller
[ 1.564934] usb usb2: Manufacturer: Linux 3.10.93 ehci_hcd
[ 1.570388] usb usb2: SerialNumber: e066d000.usb
[ 1.575896] hub 2-0:1.0: USB hub found
[ 1.579573] hub 2-0:1.0: 1 port detected
[ 1.584285] usbcore: registered new interface driver usb-storage
[ 1.590724] usbcore: registered new interface driver usbserial
[ 1.598041] sdhci: Secure Digital Host Controller Interface driver
[ 1.604202] sdhci: Copyright(c) Pierre Ossman
[ 1.608541] stb-sdhci e0635000.sdhci: SDHC/MMC controller IP_3413 Version is 0x75
[ 1.616034] stb-sdhci e0635000.sdhci: SDHC/MMC controller IP_3413 found @ [feb35000] (rev 7501)
[ 1.660084] mmc0: SDHCI controller on IP_3413 [e0635000.sdhci] using ADMA
[ 1.668714] usbcore: registered new interface driver usbhid
[ 1.674227] usbhid: USB HID core driver
[ 1.678275] TCP: cubic registered
[ 1.681545] NET: Registered protocol family 17
[ 1.686366] Key type dns_resolver registered
[ 1.690696] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
[ 1.698239] ThumbEE CPU extension supported.
[ 1.703637] ### dt-test ### No testcase data in device tree; not running tests
[ 1.900095] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.157449] jffs2: Empty flash at 0x02270c9c ends at 0x02271000
[ 4.520596] VFS: Mounted root (jffs2 filesystem) on device 31:0.
[ 4.527073] devtmpfs: mounted
[ 4.530253] Freeing unused kernel memory: 188K (80677000 - 806a6000)
init started: BusyBox v1.30.1 (2019-06-13 22:54:12 CEST)
[ 5.095333] NET: Registered protocol family 10
try to mount /dev/mtdblock1 to /var
starting /etc/init.d/S02loadmodules ...
Sat Jan 1 00:00:00 CET 2000
Creating device node for cs_display
Running insmod now .......
insmod: can't insert '/lib/modules/3.10.93/extra/lnxdvbciDrv.ko': No such device
Driver modules loaded, please start the app now...
Creating device node for KAL
Creating device node for notifyq
Creating device node for platform
Creating device node for content
Creating device node for standby
Creating device node for video
Creating device node for audio
Creating device node for pvr
Creating device node for cs_control
Creating device node for cs_ir
Creating device node for fb
starting /etc/init.d/S04mdev ...
starting /etc/init.d/S05mount ...
starting /etc/init.d/S50hostname ...
starting /etc/init.d/S51networking ...
Configuring network interfaces... udhcpc: started, v1.30.1
udhcpc: sending discover
[logoview] done with Timeout...
udhcpc: sending discover
udhcpc: sending select for 192.168.42.119
udhcpc: lease of 192.168.42.119 obtained, lease time 864000
deleting routers
route: SIOCDELRT: No such process
adding dns 192.168.42.3
Starting wlan0
Failed to connect to wpa_supplicant - wpa_ctrl_open: Success
Could not read interface wlan0 flags: No such device
Failed to initialize driver interface
done.
starting /etc/init.d/S52syslogd ...
starting /etc/init.d/S60autofs ...
Jan 1 00:00:13 CST-5EAC2A syslog.info syslogd started: BusyBox v1.30.1
1 Jan 00:00:13 ntpdate[1045]: ntpdate 4.2.8p6@1.3265-o (1)
22 Jan 11:13:54 ntpdate[1045]: step time server 130.133.1.10 offset 727701220.893603 sec
starting
starting /etc/init.d/S80dvdreadfs ...
starting /etc/init.d/S90inetd ...
starting /etc/init.d/S96nfsd ...
starting /var/etc/init.d/S9T_tuxcald ...
starting /var/etc/init.d/S9T_tuxmaild ...
Jan 22 11:13:55 CST-5EAC2A daemon.info : starting pid 1082, tty '': '/etc/init.d/start_neutrino'Please press Enter to activate this console. /var/plugins/operations camd_init
/var/plugins/operations cardserver_start
/var/plugins/operations camd_start
/var/plugins/operations rezap
[ConfigFile] Unable to open file /share/tuxbox/neutrino/themes/.theme for reading.
cannot read locale: No such file or directory
[frontend.cpp:Open:284] /dev/dvb/adapter0/frontend1: No such file or directory
[frontend.cpp:Open:284] /dev/dvb/adapter0/frontend2: No such file or directory
[frontend.cpp:Open:284] /dev/dvb/adapter0/frontend3: No such file or directory
[frontend.cpp:Open:284] /dev/dvb/adapter1/frontend0: No such file or directory
[frontend.cpp:Open:284] /dev/dvb/adapter1/frontend1: No such file or directory
[frontend.cpp:Open:284] /dev/dvb/adapter1/frontend2: No such file or directory
[frontend.cpp:Open:284] /dev/dvb/adapter1/frontend3: No such file or directory
[frontend.cpp:Open:284] /dev/dvb/adapter2/frontend0: No such file or directory
[frontend.cpp:Open:284] /dev/dvb/adapter2/frontend1: No such file or directory
[frontend.cpp:Open:284] /dev/dvb/adapter2/frontend2: No such file or directory
[frontend.cpp:Open:284] /dev/dvb/adapter2/frontend3: No such file or directory
[frontend.cpp:Open:284] /dev/dvb/adapter3/frontend0: No such file or directory
[frontend.cpp:Open:284] /dev/dvb/adapter3/frontend1: No such file or directory
[frontend.cpp:Open:284] /dev/dvb/adapter3/frontend2: No such file or directory
[frontend.cpp:Open:284] /dev/dvb/adapter3/frontend3: No such file or directory
2023-01-22 11:14:02.454 [sectionsd] start
2023-01-22 11:14:02.492 [sectionsd] starting
2023-01-22 11:14:02.536 [sectionsd] timeThread::run:: starting, pid 1115 (1700861104)
2023-01-22 11:14:02.544 [sectionsd] eitThread::run:: starting, pid 1115 (1698763952)
2023-01-22 11:14:02.553 2023-01-22 11:14:02.568 [sectionsd] freeSatThread::run:: starting, pid 1115 (1694569648)
[sectionsd] cnThread::run:: starting, pid 1115 (1696666800)
2023-01-22 11:14:02.612 [sectionsd] timeThread: get DVB time ch 0x000000000000 (isOpen 1)
[ConfigFile] Unable to open file /var/tuxbox/config/bookmarks for reading.
loading locales: scandir: No such file or directory
--- > rezapping
2023-01-22 11:14:38.632 [sectionsd] timeThread: get DVB time ch 0x000000000000 rc: -1 neutrino_sets_time 0
2023-01-22 11:14:38.637 [sectionsd] timeThread: Time set FAILED (enabled: ntp 0 dvb 1)
2023-01-22 11:14:39.675 [sectionsd] timeThread: get DVB time ch 0x000000000000 (isOpen 1) -
Hi,
die Pluginausgabe kannst Du verhinden indem Du die Ausgabe der Prozesse nach /dev/null umleitest. Das es nicht ausgeführt wird könnte am Umlaut im text liegen:
#!/bin/sh touch /tmp/.test msgbox popup="Plugin ausgef~uhrt" timeout=3 > /dev/null exit 0
Hab da aber auch noch ne Frage zu:
in meiner cfg steht u.a.:
needfb=1 needrc=1
Wenn ich nun in meinem Plugin sowas hier mache:
#!/bin/sh while [1] do msgbox msg="testnachricht" select="text1,text2,Ende" case $? in 0|3) break ;; *) # tu irgendwas ;; esac done
So werden die über die Fernbedienung eingegebenen Steuerbefehle nach der Beendigung des Plugin-Scriptes nochmals vom Neutrino abgearbeitet - aber wie kann ich das verhindern? Ich dachte das needrc=1 genau dafür sorgen daß die Steuercode nicht weitergereicht werden.
Emergency Complete Flash Trinity (ECF-Trinity)
in Allgemein
Geschrieben
So habs nach einigen Versuchen hinbekommen.
Hab mal ganz von vorne angefangen mit nem ECF-Trinity-2_13.zip, dann auf CST_302_Beta_Trinity.rar upgedated und anschließend über KW V3.92 das KW V4.24 installiert.
Nun läuft die Box