Moin,
hab gereade versucht eine Trinity V1 über den Emergency Complete Flash aufs Keywelt image zu bekommen - es wird auch kurz das KeyWelt logo angezeigt aber dann hängt die Box und nix tut sich mehr...
bevor ich die Box geflasht hatte habe ich mich per telnet eingelogged und geschaut um welche Platform es sich handelt:
# uname -a
Linux stb_00C55C5EAC2A 2.6.34 #5 SMP Tue Jun 18 20:03:24 HKT 2013 armv7l GNU/Linux
# cat /proc/cpuinfo
Processor : ARMv7 Processor rev 1 (v7l)
processor : 0
BogoMIPS : 996.14
Features : swp half thumb fastmult vfp edsp thumbee vfpv3 vfpv3d16
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x1
CPU part : 0xc09
CPU revision : 1
Hardware : Entropic STB Apollo platform
Revision : 84700102
Serial : 0123…
Für mich sieht es so aus als ob er das image nicht flashen kann
reading rootfs.arm.jffs2.nand
36113564 bytes read
NAND erase: device 0 offset 0x0, size 0x10000000
Bad block table found at page 262080, version 0x01
Bad block table found at page 262016, version 0x01
Erasing at 0xffe0000 -- 100% complete.
OK
NAND write: device 0 offset 0x0, size 0x2270c9c
36113564 bytes written: OK
** Invalid boot device **
** Skipping rootfs1.arm.jffs2.nand **
** Invalid boot device **
** Skipping var.arm.jffs2.nand **
resetting ...
nach dem booten komme ich auch per Telnet auf die Box - so ganz tot ist sie also nicht...
Hier das komplette Flash-Protokoll mit eingestecktem USB-Stick und drücken der Power-Taste - der USB Stick wird beim ersten reboot abgezogen: