Jump to content

D2 Nokia fährt nicht ganz hoch


Gast weichei

Empfohlene Beiträge

Hallo zusammen,

ich hab da ein kleines Problem mit einer 2er Nokia 2xI.

Die wurde schon mal auf neutrino geflasht und ist auch gelaufen. Jetzt hatte ich versucht eine neue Boxcracker drauf zu machen und seit dem läuft da nicht mehr sehr viel.

Die box startet und bleibt auf "loading kernel" stehen und tut nix mehr.

Hab dann etliche male versucht andere Images drauf zu machen, was auch ohne Fehler geht (das aufspielen) aber beim booten bleibt sie immer an der selben Stelle hängen. Hatte mir schon ein paar treads auf dem board mit ähnlichen sachen angesehen und deren Ratschläge ausprobiert (wie z.B. Nullmodem und Netzwerk vorm booten abziehen und so was...) aber es kommt immer das selbe raus!

Hat jemand von euch eine idee was das noch sein könnte???

Link zu diesem Kommentar
Auf anderen Seiten teilen

Hoffe das ist der bootlog den du sehen wolltest.

 

 

***BootP server started... Port 67

***TFTP server started... Port 69

BootP> Request from 00:50:9C:42:EF:09 (assuming that this is DBox).

BootP> Created dynamic ARP entry for DBoxIP 192.168.1.202 with MAC 00:50:9C:42:EF:09

BootP> Answer sent!

TFTP> Started TFTP-Transfer for "D:\ppcboot9684\ppcboot_nullmodem"...

TFTP> Transfer finished, sent 394 blocks

BootP> Created dynamic ARP entry for DBoxIP 192.168.1.202 with MAC 00:50:9C:42:EF:09

BootP> Answer sent!

TFTP> Non-BootP TFTP-transfer requested "D\tftpboot\logo-lcd"

TFTP> Started TFTP-Transfer for "D:\ppcboot9684\logo-lcd"...

TFTP> Transfer finished, sent 16 blocks

BootP> Created dynamic ARP entry for DBoxIP 192.168.1.202 with MAC 00:50:9C:42:EF:09

BootP> Answer sent!

TFTP> Non-BootP TFTP-transfer requested "D\tftpboot\logo-fb"

TFTP> Started TFTP-Transfer for "D:\ppcboot9684\logo-fb"...

TFTP> Transfer finished, sent 352 blocks

BootP> Created dynamic ARP entry for DBoxIP 192.168.1.202 with MAC 00:50:9C:42:EF:09

BootP> Answer sent!

TFTP> Non-BootP TFTP-transfer requested "\tftpboot\flash.img"

TFTP> Started TFTP-Transfer for "D:\ppcboot9684\flash.img"...

TFTP> Transfer finished, sent 16129 blocks

 

 

÷debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.2 mID 01

debug: feID dd gtxID 0b

debug: fpID 5a dsID http://Hallenberg.com

debug: HWrev 09 FPrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

debug: autoboot aborted from terminal

dbox2:root>

dbox2:root> boot net net net net net net net net net net

debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Got BOOTP reply from Server IP

debug: Sending TFTP-request for file D/ppcboot9684/ppcboot_nullmodem

debug: Got Block #0050

debug: Got Block #0050

debug: Got Block #0100

debug: Got Block #0150

debug: Got Block #0200

debug: Got Block #0250

debug: Got Block #0300

debug: Got Block #0350

will verify ELF image, start= 0x800000, size= 201596

verify sig: 262

boot net: boot file has no valid signature

Branching to 0x40000

 

 

ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

 

Initializing...

CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache

Board: ### No HW ID - assuming TQM8xxL

DRAM: (faked) 32 MB

Ethernet: 00-50-9c-42-ef-09

FLASH: 8 MB

LCD driver (KS0713) initialized

BOOTP broadcast 1

TFTP from server

Filename 'D/tftpboot/logo-lcd'.

Load address: 0x130000

Loading: * ##

done

LCD logo at: 0x130000 (0x1F9FFC0 bytes)

BOOTP broadcast 1

TFTP from server

Filename 'D/tftpboot/logo-fb'.

Load address: 0x120000

Loading: * ####################################

done

FB logo at: 0x0 (0x1FC0000 bytes)

AVIA Frambuffer

Input: serial

Output: serial

 

Select (1-3), other keys to stop autoboot: 0

'bootd' recursion detected

 

dbox2-ppcboot> bootp 120000 /tftpboot/flash.img

 

BOOTP broadcast 1

TFTP from server

Filename '/tftpboot/flash.img'.

Load address: 0x120000

Loading: * ################################################################################

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

###########################################################################

done

 

dbox2-ppcboot> protect off 10020000 107FFFFF

 

...............................................................

Un-Protected 63 sectors

 

dbox2-ppcboot> erase 10020000 107FFFFF

 

Erase Flash from 0x10020000 to 0x107fffff

 

sector 4 ....

sector 5 ....

sector 6 ....

sector 7 ....

sector 8 ....

sector 9 ....

sector 10 ....

sector 11 ....

sector 12 ....

sector 13 ....

sector 14 ....

sector 15 ....

sector 16 ....

sector 17 ....

sector 18 ....

sector 19 ....

sector 20 ....

sector 21 ....

sector 22 ....

sector 23 ....

sector 24 ....

sector 25 ....

sector 26 ....

sector 27 ....

sector 28 ....

sector 29 ....

sector 30 ....

sector 31 ....

sector 32 ....

sector 33 ....

sector 34 ....

sector 35 ....

sector 36 ....

sector 37 ....

sector 38 ....

sector 39 ....

sector 40 ....

sector 41 ....

sector 42 ....

sector 43 ....

sector 44 ....

sector 45 ....

sector 46 ....

sector 47 ....

sector 48 ....

sector 49 ....

sector 50 ....

sector 51 ....

sector 52 ....

sector 53 ....

sector 54 ....

sector 55 ....

sector 56 ....

sector 57 ....

sector 58 ....

sector 59 ....

sector 60 ....

sector 61 ....

sector 62 ....

sector 63 ....

sector 64 ....

sector 65 ....

sector 66 .... done

Erased 63 sectors

 

dbox2-ppcboot> cp.l 120000 10020000 1F8000

 

Copy to Flash... done

Link zu diesem Kommentar
Auf anderen Seiten teilen

Uuups, ich glaube das wolltest Du sehen!

 

 

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.2 mID 01

debug: feID dd gtxID 0b

debug: fpID 5a

debug: HWrev 09 FPrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0036

 

will verify ELF image, start= 0x800000, size= 160940

verify sig: 263

Branching to 0x40000

 

 

U-Boot 1.1.2 (Tuxbox) (Sep 5 2005 - 20:28:32)

 

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache

Board: DBOX2, Nokia, BMon V1.2

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: ... done.

FB: ready

LCD: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 0

### FS (squashfs) loading 'vmlinuz' to 0x100000

### FS LOAD ERROR<0> for vmlinuz!

...............................................................

Un-Protected 63 sectors

## Booting image at 00100000 ...

Bad Magic Number

Link zu diesem Kommentar
Auf anderen Seiten teilen

@snowhead

 

÷debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.2 mID 01

debug: feID dd gtxID 0b

debug: fpID 5a dsID http://Hallenberg.com

debug: HWrev 09 FPrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

debug: autoboot aborted from terminal

dbox2:root>

dbox2:root> boot net net net net net net net net net net

debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Got BOOTP reply from Server, My IP

debug: Sending TFTP-request for file D/ppcboot19171/ppcboot_nullmodem

debug: Got Block #0050

debug: Got Block #0050

debug: Got Block #0100

debug: Got Block #0150

debug: Got Block #0200

debug: Got Block #0250

debug: Got Block #0300

debug: Got Block #0350

will verify ELF image, start= 0x800000, size= 201596

verify sig: 262

boot net: boot file has no valid signature

Branching to 0x40000

 

 

ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

 

Initializing...

CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache

Board: ### No HW ID - assuming TQM8xxL

DRAM: (faked) 32 MB

Ethernet: 00-50-9c-42-ef-09

FLASH: 8 MB

LCD driver (KS0713) initialized

BOOTP broadcast 1

TFTP from server 192.168.1.3; our IP address is 192.168.1.202

Filename 'D/tftpboot/logo-lcd'.

Load address: 0x130000

Loading: * ##

done

LCD logo at: 0x130000 (0x1F9FFC0 bytes)

BOOTP broadcast 1

TFTP from server 192.168.1.3; our IP address is 192.168.1.202

Filename 'D/tftpboot/logo-fb'.

Load address: 0x120000

Loading: * ####################################

done

FB logo at: 0x0 (0x1FC0000 bytes)

AVIA Frambuffer

Input: serial

Output: serial

 

Select (1-3), other keys to stop autoboot: 0

'bootd' recursion detected

 

dbox2-ppcboot> bootp 120000 /tftpboot/flash.img

 

BOOTP broadcast 1

TFTP from server; our IP address is

Filename '/tftpboot/flash.img'.

Load address: 0x120000

Loading: * ################################################################################

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

################################################################################

#

######################################################################T ################################################################################

######

done

 

dbox2-ppcboot> protect off 10020000 107FFFFF

 

...............................................................

Un-Protected 63 sectors

 

dbox2-ppcboot> erase 10020000 107FFFFF

 

Erase Flash from 0x10020000 to 0x107fffff

 

sector 4 ....

sector 5 ....

sector 6 ....

sector 7 ....

sector 8 ....

sector 9 ....

sector 10 ....

sector 11 ....

sector 12 ....

sector 13 ....

sector 14 ....

sector 15 ....

sector 16 ....

sector 17 ....

sector 18 ....

sector 19 ....

sector 20 ....

sector 21 ....

sector 22 ....

sector 23 ....

sector 24 ....

sector 25 ....

sector 26 ....

sector 27 ....

sector 28 ....

sector 29 ....

sector 30 ....

sector 31 ....

sector 32 ....

sector 33 ....

sector 34 ....

sector 35 ....

sector 36 ....

sector 37 ....

sector 38 ....

sector 39 ....

sector 40 ....

sector 41 ....

sector 42 ....

sector 43 ....

sector 44 ....

sector 45 ....

sector 46 ....

sector 47 ....

sector 48 ....

sector 49 ....

sector 50 ....

sector 51 ....

sector 52 ....

sector 53 ....

sector 54 ....

sector 55 ....

sector 56 ....

sector 57 ....

sector 58 ....

sector 59 ....

sector 60 ....

sector 61 ....

sector 62 ....

sector 63 ....

sector 64 ....

sector 65 ....

sector 66 .... done

Erased 63 sectors

 

dbox2-ppcboot> cp.l 120000 10020000 1F8000

 

Copy to Flash... done

 

dbox2-ppcboot>

 

 

 

 

 

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.2 mID 01

debug: feID dd gtxID 0b

debug: fpID 5a

debug: HWrev 09 FPrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0036

 

will verify ELF image, start= 0x800000, size= 160940

verify sig: 263

Branching to 0x40000

 

 

U-Boot 1.1.2 (Tuxbox) (Oct 3 2005 - 17:44:01)

 

CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

Board: DBOX2, Nokia, BMon V1.2

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: ... done.

FB: ready

LCD: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 0

### FS (squashfs) loading 'vmlinuz' to 0x100000

### FS load complete: 461493 bytes loaded to 0x100000

...............................................................

Un-Protected 63 sectors

## Booting image at 00100000 ...

Bad Magic Number

=>

Link zu diesem Kommentar
Auf anderen Seiten teilen

Sag mal, irgendwie sieht mir das aus als ob du nicht nur ein mal Flaschst...

 

Ich seh da gar kein bootlog...

 

Kannst du das image mal flashen wie du es immer machst bis er done sagt. Dann den bootmanger stoppen, dann die Einstellungen des bootmangers so ändern das überall der Hacken raus ist nur noch bei Com Port drinn. Dann den Bootmanager neu starten und dann die box...

 

Gruß

Kai

Link zu diesem Kommentar
Auf anderen Seiten teilen

@ kai-t

 

also, ich hab sie eigentlich nur einmal geflasht.

danach den hacken vom bootp aus gemacht und gestartet, um zu sehen, was die box sagt. hab jetzt auch den hacken vom rarp server weg gemacht. die meldung sieht aber genau so aus. hatte nur beide logs auf einmal gepostet.

 

 

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.2 mID 01

debug: feID dd gtxID 0b

debug: fpID 5a dsID

debug: HWrev 09 FPrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0036

 

will verify ELF image, start= 0x800000, size= 160940

verify sig: 263

Branching to 0x40000

 

 

U-Boot 1.1.2 (Tuxbox) (Oct 3 2005 - 17:44:01)

 

CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

Board: DBOX2, Nokia, BMon V1.2

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: ... done.

FB: ready

LCD: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 0

### FS (squashfs) loading 'vmlinuz' to 0x100000

### FS load complete: 461493 bytes loaded to 0x100000

...............................................................

Un-Protected 63 sectors

## Booting image at 00100000 ...

Bad Magic Number

=>

Link zu diesem Kommentar
Auf anderen Seiten teilen

hallo,

 

ich habe son ähnliches problem. die box lief schon ewig. das problem ist das die immer wieder loopt. hab denn mal ein neues image draufgemacht, ändert sich aber nix. aber flashen lässt sie sich.

hab mal vom comterm

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 0

### FS (jffs2) loading 'vmlinuz' to 0x100000

### FS load complete: 613222 bytes loaded to 0x100000

...............................................................

Un-Protected 63 sectors

## Booting image at 00100000 ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 613158 Bytes = 598.8 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

 

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: WATCHDOG RESET

debug: BMon V1.0 mID 01

debug: feID dd gtxID 0b

debug: fpID 5a dsID 01-08.a4.2c.07.00.00-a8

debug: HWrev X5 SWrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0032

 

will verify ELF image, start= 0x800000, size= 153208

verify sig: 263

Branching to 0x40000

 

 

U-Boot 1.1.1 (TuxBox) (Dec 24 2004 - 05:21:37)

 

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***

Board: DBOX2, Nokia, BMon V1.0

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: ....... done.

FB: ready

LCD: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 0

### FS (jffs2) loading 'vmlinuz' to 0x100000

### FS load complete: 613222 bytes loaded to 0x100000

...............................................................

Un-Protected 63 sectors

## Booting image at 00100000 ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 613158 Bytes = 598.8 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

 

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: WATCHDOG RESET

debug: BMon V1.0 mID 01

debug: feID dd gtxID 0b

debug: fpID 5a dsID 01-08.a4.2c.07.00.00-a8

debug: HWrev X5 SWrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0032

 

will verify ELF image, start= 0x800000, size= 153208

verify sig: 263

Branching to 0x40000

 

 

U-Boot 1.1.1 (TuxBox) (Dec 24 2004 - 05:21:37)

 

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***

Board: DBOX2, Nokia, BMon V1.0

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: ....... done.

FB: ready

LCD: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

 

 

vielleicht kann mir da einer weiterhelfen.

danke

Link zu diesem Kommentar
Auf anderen Seiten teilen

  • Wer ist Online   0 Benutzer

    • Keine registrierten Benutzer online.
×
×
  • Neu erstellen...