stevedee78 Geschrieben 9. Februar 2006 Melden Share Geschrieben 9. Februar 2006 (bearbeitet) hallo, ich besitze eine DBOX2 KABEL Sagem mit 2 x AMD und habe sie gestern in den DebugModus versetzt. Habe gerade das KW Image Januar V4 Draufgetan. Nachdem ich meine Bouquet und services von mein 1xI Sagem DBox2 per ftp eingespielt habe ist pemiere Dunkel ( Komplett ABO und P02 Karte) und ARD,RTL,SAT1 usw (Freetv) auch bzw.Freezers Knacken oder Kanal nicht verfügbar. Hoffentlich könnt ihr mir helfen. P.S. Board SUCHE hat nicht weiter geholfen Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS debug: Got Block #0040 will verify ELF image, start= 0x800000, size= 153668 verify sig: 262 Branching to 0x40000 U-Boot 1.1.2 (Tuxbox) (Dec 28 2005 - 01:56:29) CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Sagem, BMon V1.1 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ... done. FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 666402 bytes loaded to 0x100000 ............................................................... Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 666338 Bytes = 650.7 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.31-dbox2 (image@tower) (gcc version 3.4.4) #2 Mi Dez 28 02:33: 07 CET 2005 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs Decrementer Frequency = 247500000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x2000) Console: colour dummy device 80x25 Calibrating delay loop... 65.74 BogoMIPS Memory: 30832k available (1132k kernel code, 344k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc. Squashfs 2.2-r2 (released 2005/09/08) © 2002-2005 Phillip Lougher i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:39:36:33 loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank Amd/Fujitsu Extended Query Table at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00540000 : "root (squashfs)" 0x00540000-0x007e0000 : "var (jffs2)" 0x007e0000-0x00800000 : "flfs (u-boot)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init init started: BusyBox v1.01 (2005.12.28-01:21+0000) multi-call bUsing /lib/modu les/2.4.31-dbox2/misc/event.o event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $ Using /lib/modules/2.4.31-dbox2/misc/tuxbox.o Using /var/modules/dvb-core.o Using /lib/modules/2.4.31-dbox2/misc/dbox2_i2c.o [i2c-8xx]: mpc 8xx i2c init [i2c-8xx]: adapter: 0 Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp.o Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_input.o Using /lib/modules/2.4.31-dbox2/misc/avs.o Using /lib/modules/2.4.31-dbox2/misc/saa7126.o Detected STB: Vendor: Sagem Model: D-BOX2 Using /lib/modules/2.4.31-dbox2/misc/cam.o $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $ Using /lib/modules/2.4.31-dbox2/misc/dvb_i2c_bridge.o Using /lib/modules/2.4.31-dbox2/misc/avia_napi.o $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $ DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600). dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter Using /lib/modules/2.4.31-dbox2/misc/cam_napi.o $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $ Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_napi.o Using /lib/modules/2.4.31-dbox2/misc/avia_av.o avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $ avia_av_core: Starting avia_av_wdt thread. avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $ avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $ Using /lib/modules/2.4.31-dbox2/misc/avia_gt.o avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $ avia_gt_core: autodetecting chip type... eNX avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $ avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $ avia_gt_ucode: loaded ucode v001A avia_gt_ucode: ucode section filters disabled. avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning... avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $ avia_gt_pcm_set_rate(44100) avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $ avia_gt_core: Loaded AViA eNX/GTX driver Using /lib/modules/2.4.31-dbox2/mavia_av_core: Starting avia_gt_wdt thread. isc/avia_gt_fb.o avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device Using /lib/modules/2.4.31-dbox2/misc/lcd.o lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface Using /lib/modules/2.4.31-dbox2/misc/avia_gt_lirc.o avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $ Using /lib/modules/2.4.31-dbox2/misc/avia_gt_oss.o avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $ avia_gt_pcm_set_rate(44100) Using /lib/modules/2.4.31-dbox2/misc/avia_gt_v4l2.o avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $ Using /lib/modules/2.4.31-dbox2/misc/at76c651.o DVB: registering frontend 0:0 (Atmel AT76C651A with TUA6010XS)... Using /lib/modules/2.4.31-dbox2/misc/ves1x93.o Using /lib/modules/2.4.31-dbox2/misc/avia_av_napi.o avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $ Using /lib/modules/2.4.31-dbox2/misc/avia_gt_napi.o avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $ Using /lib/modules/2.4.31-dbox2/misc/dvb2eth.o Using /lib/modules/2.4.31-dbox2/misc/aviaEXT.o Using /lib/modules/2.4.31-dbox2/misc/avia_gt_proc.o avia_gt_proc: $Id: avia_gt_proc.c, v 0.1.3 2005/12/11 22:30:00 Skars & Merandos Exp $ avia_gt_proc: Description: GTX/ENX proc_dev Driver with proc_fs extension options: (demux reinit) enx_reset=1 (framer chan.) fc_reset=0 (clr avia reg) avia=0 (enx td trace) trace=0 (lock, unlock) spinlock=0 Schreiben ueber avia_gt.o (delay) delay=500 cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $ Using /lib/modules/2.4.31-dbox2/kernel/net/sunrpc/sunrpc.o Using /lib/modules/2.4.31-dbox2/kernel/fs/lockd/lockd.o Using /lib/modules/2.4.31-dbox2/kernel/fs/nfs/nfs.o Using /lib/modules/2.4.31-dbox2/kernel/fs/cifs/cifs.o Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970 /var/plugins/operations logcs_init $Id: sectionsd.cpp,v 1.196 2005/11/12 12:10:37 metallica Exp - Worschter-Extensi on $ caching 50 hours events are old 120min after their end time minutes between timeset 30 /var/plugins/operations camd_init $Id: zapit.cpp,v 1.384 2005/11/28 21:59:54 Kroki & Worschter Exp $ [zapit] MAX_SOCKETS=3 [zapit] PMT update enabled [ConfigFile] Unable to open file /var/tuxbox/config/zapit/zapit.conf for reading . /var/plugins/operations cardserver_start $Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $ [controld] Boxtype detected: (3, Sagem D-BOX2) /var/plugins/operations camd_start [nhttpd] Neutrino HTTP-Server starting.. [LCDFONT] initializing core.../var/plugins/operations sect_renice /var/plugins/operations epg_reinit [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular) [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular) [LCDFONT] Intializing font cache... starte camd2 [camd] CA_SEND_MSG: Remote I/O error [camd] CA_SEND_MSG: Remote I/O error starte epg_watchdog dbox2 watchdog v0.81 by bsdice [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... [LCDFONT] FTC_Face_Requester (Fix15/Bold) [LCDFONT] FTC_Face_Requester (Fix14/Bold) /dev/input/event1: No such file or directory rdate: time.fu-berlin.de: Host name lookup failure [neutrino] menue setup [neutrino] registering as event client [basicsocket] send_data: Broken pipe [CBasicClient] send failed: /tmp/sectionsd.sock [neutrino] initialized everything zap failed! [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [LCDFONT] FTC_Face_Requester (Fix12/Regular) [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out bearbeitet 9. Februar 2006 von stevedee78 Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
d_1734 Geschrieben 9. Februar 2006 Melden Share Geschrieben 9. Februar 2006 (bearbeitet) Hast du die Box auf Kabelmodus umgestellt? Blaue Taste, Keyweltmenü, Systemmenü, Sat/Kabelmodus... bearbeitet 9. Februar 2006 von d_1734 Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
stevedee78 Geschrieben 9. Februar 2006 Autor Melden Share Geschrieben 9. Februar 2006 Ohh Danke mache gerade noch mal ne cableBruteforce Kanalsuche und die dauert. werde unmittelbar danach auf Kabel Modus umstellen. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
d_1734 Geschrieben 9. Februar 2006 Melden Share Geschrieben 9. Februar 2006 (bearbeitet) Wenn du nicht alle Kanäle findets besorg dir aus diesem Thrad mal aktuelle Settings: http://www.keywelt-board.com/index.php?showtopic=65050 Gibt auch welche von mir für Kabel Deutschland, sind ganz gut sortiert denke ich *g Aber jeder hat ja seinen eigenen Geschmack... EDIT: UUUPS sehe grade du hast ne P02 Karte, also privates Kabelnetz, dann ist Bruteforce scan auf jeden Fall das beste!!! Sorry! Gruß Und ich glaube in nem privaten Kabelnetz muss man auch garnicht auf Kabelmodus umstellen, oder? Sorry da bin ich jetzt leider überfragt. Aber ausprobieren kann ja nicht schaden! bearbeitet 9. Februar 2006 von d_1734 Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
stevedee78 Geschrieben 9. Februar 2006 Autor Melden Share Geschrieben 9. Februar 2006 Habe jetzt mal Kabelmodus Probiert und Das gleiche Problem wieder. Such lauf findet alle sender (17 Transponder und ungefähr 110 Sender). java script:emoticon('') smilieHmmmmmmmmmmmmmmmmmm Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
stevedee78 Geschrieben 9. Februar 2006 Autor Melden Share Geschrieben 9. Februar 2006 Kriege sogar EPG von allen Sendern. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge