Dbox2 Philips 2xI "Warten auf rcs" ????

[McFlyHH]

Hi,

ich bins mal wieder ich hab anscheid wieder n Defekte gekauft

 

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0  mID 02
debug: feID 00	enxID 03
debug: fpID 52	 dsID xxxxxxxxxxxxxxxxxxxxxxxxx(diesmal net)
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0040

will verify ELF image, start= 0x800000, size= 160940
verify sig: 263
Branching to 0x40000


U-Boot 1.1.2 (Tuxbox) (Oct  3 2005 - 17:44:01)

CPU:   PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Philips, BMon V1.0
   Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS: ... done.
FB:	ready
LCD:   ready
In:	serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET

Options:
 1: Console on null
 2: Console on ttyS0
 3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0 
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 658101 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
  Image Name:   dbox2
  Image Type:   PowerPC Linux Kernel Image (gzip compressed)
  Data Size:	658037 Bytes = 642.6 kB
  Load Address: 00000000
  Entry Point:  00000000
  Verifying Checksum ... OK
  Uncompressing Kernel Image ... OK
Linux version 2.4.31-dbox2 (image@suse) (gcc version 3.3.5) #2 Mo Okt 3 18:23:31
CEST 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30840k available (1124k kernel code, 344k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:2c:04:f0
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00540000 : "root (squashfs)"
0x00540000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started:  BusyBox v1.01 (2005.10.03-16:09+0000) multi-call bjffs2_scan_eras
eblock(): Magic bitmask 0x1985 not found at 0x000b8950: 0x198d instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000b8958: 0xd971 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000b896c: 0x0002 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000b8970: 0x4341 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000b8974: 0x4341 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000b8978: 0x4341 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000b8988: 0x0600 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000b898c: 0x2837 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000b8990: 0xe4c5 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000b8994: 0x785e in
stead
Further such events for this erase block will not be printed
Calculated unchecked size 0001ee0c != stored unchecked size 0101ee0c
kernel BUG at scan.c:133!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C006675C XER: 00000000 LR: C006675C SP: C1C29CC0 REGS: c1c29c10 TRAP: 1000 
  Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1c28000[11] 'mount' Last syscall: 21 
last math 00000000 last altivec 00000000
GPR00: C006675C C1C29CC0 C1C28000 0000001A 00001032 00000001 00000F48 C013F84B 
GPR08: 00000000 C0150000 0000001C C1C29BD0 C0150000 1007D338 00000000 00000000 
GPR16: 00000000 00000005 C0120000 C0120000 C0130000 C0120000 00000A38 00000002 
GPR24: 0001EE0C C1C081B0 C1C080E4 C1C084F0 C1C080E4 00000000 FFFFFFF4 C1C080E4 
Call backtrace: 
C006675C C0069F3C C006A6F8 C006C468 C006CA7C C00376CC C0037AC8 
C004C908 C004CC88 C004D1C0 C000257C 00000000 1004A638 1004AAA8 
10003FE4 10003C3C 0FE8CC14 00000000 
Floating point exception
warte auf rcS
warte auf rcS
warte auf rcS
warte auf rcS
warte auf rcS
warte auf rcS
warte auf rcS
warte auf rcS
warte auf rcS
warte auf rcS

 

Auf dem Bild steht Loading Kernel und da bleibt er hängen...

Die Box soll eigendlich 100% Okay sein.

Is das ein Image Fehler oder liegts an der Box??

Wenn an der Box dann schick ich die zurück....

Man ej wieso hab ich son scheiss Pech mit den Dboxen für SAT ?????

 

Ps. Ist euer Image v4 September

 

Gruß

McFlyHH

[McFlyHH]

Ich will euch ja net verarschen oder will nicht tausende Threads machen was man ja meinen könnte nach meinen letzten Themen, aber jetzt geht sie ....

 

Muss man das verstehen? Lag das vielleicht dadran das ich sie gerade ausgepackt hab oder so...

 

Einziges Problem noch kein Ton aber das wird ja an den Ucodes liegen oder?

Muss ich die Box eigendlich aufschrauben wegen des Tuner Treibers und welchen Avia Chip ich hab?

 

Gruß

McFly

 

EDIT:

ALLES ERLEDIGT, Ton lag am DD.