Jump to content

FLASH-problem:gweny-enigma will nicht mehr!

posmu

Von posmu
in Allgemein

 Share

Empfohlene Beiträge

posmu

posmu

Geschrieben
Geschrieben (bearbeitet)

Hi!

 

Mein CS Partner hat ein RIESEN Problem mit seiner Box!

 

Hier sein Bootlog !

 

[debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.2 mID 01

debug: feID dd gtxID 0b

debug: fpID 5a dsID xxxxx

debug: HWrev 09 FPrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0032

 

will verify ELF image, start= 0x800000, size= 155528

verify sig: 263

Branching to 0x40000

 

 

U-Boot 1.1.2 (Tuxbox) (Aug 28 2005 - 14:12:52)

 

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache

Board: DBOX2, Nokia, BMon V1.2

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: ........... done.

FB: ready

LCD: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 0

### FS (jffs2) loading 'vmlinuz' to 0x100000

### FS load complete: 643620 bytes loaded to 0x100000

...............................................................

Un-Protected 63 sectors

## Booting image at 00100000 ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 643556 Bytes = 628.5 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.31-dbox2 (gweny@linux) (gcc version 3.3.5) #1 Fr Sep 23 20:00:

30 CEST 2005

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: console=ttyS0 root=/dev/mtdblock2 rw

Decrementer Frequency = 251625000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)

Warning: real time clock seems stuck!

Console: colour dummy device 80x25

Calibrating delay loop... 66.76 BogoMIPS

Memory: 30840k available (1096k kernel code, 372k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (2002081 Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.

Squashfs 2.1-r2 (released 2004/12/15) © 2002-2004 Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:44:0f:4f

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Creating 5 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "FLFS (U-Boot)"

0x00040000-0x00800000 : "root (jffs2)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

cramfs: wrong magic

VFS: Mounted root (jffs2 filesystem).

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

Starting pid 11, console /dev/console: '/etc/init.d/rcS'ti-call b

Using /lib/modules/2.4.31-dbox2/misc/tuxbox.o

Detected STB:

Vendor: Nokia

Model: D-BOX2

Using /lib/modules/2.4.31-dbox2/misc/dvb-core.o

Using /lib/modules/2.4.31-dbox2/misc/dbox2_i2c.o

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

Using /lib/modules/2.4.31-dbox2/misc/dvb_i2c_bridge.o

Using /lib/modules/2.4.31-dbox2/misc/event.o

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp.o

Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_input.o

Using /lib/modules/2.4.31-dbox2/misc/ves1820.o

Using /lib/modules/2.4.31-dbox2/misc/ves1x93.o

Using /lib/modules/2.4.31-dbox2/misc/avs.o

Using /lib/modules/2.4.31-dbox2/misc/saa7126.o

Using /lib/modules/2.4.31-dbox2/misc/cam.o

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

Using /lib/modules/2.4.31-dbox2/misc/lcd.o

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

Using /lib/modules/2.4.31-dbox2/misc/avia_napi.o

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

DVB: registering frontend 0:0 (VES1893)...

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

Using /lib/modules/2.4.31-dbox2/misc/avia_av.o

avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $

avia_av_core: Starting avia_av_wdt thread.

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $

Using /lib/modules/2.4.31-dbox2/misc/avia_gt.o

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... GTX

avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_core: masking unhandled irq reg 1 bit 11

avia_gt_core: masking unhandled irq reg 1 bit 13

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters disabled.

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

Using /lib/modules/2.4.31-dbox2/misc/avia_gt_fb.o

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

Using /lib/modules/2.4.31-dbox2/misc/avia_gt_lirc.o

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

Using /lib/modules/2.4.31-dbox2/misc/avia_gt_oss.o

avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $

avia_gt_pcm_set_rate(44100)

Using /lib/modules/2.4.31-dbox2/misc/avia_gt_v4l2.o

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

Using /lib/modules/2.4.31-dbox2/misc/cam_napi.o

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

Using /lib/modules/2.4.31-dbox2/misc/avia_av_napi.o

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

Using /lib/modules/2.4.31-dbox2/misc/avia_gt_napi.o

avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

Using /lib/modules/2.4.31-dbox2/misc/dvb2eth.o

Using /lib/modules/2.4.31-dbox2/misc/aviaEXT.o

Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_napi.o

Using /lib/modules/2.4.31-dbox2/misc/avia_gt_proc.o

avia_gt_proc: $Id: avia_gt_proc.c, v 0.1.3 2003/09/25 12:24:00 Skars & Merandos

Exp $

avia_gt_proc: Description: GTX/ENX proc_dev Driver with proc_fs extension

options:

(demux reinit) enx_reset=1

(framer chan.) fc_reset=1

(clr avia reg) avia=1

(enx td trace) trace=0

(lock, unlock) spinlock=0

Schreiben ueber avia_gt.o

(delay) delay=10

Using /lib/modules/2.4.31-dbox2/misc/multicam.o

DBox2 Multicam Driver v1.01 skars & doz21

Using /lib/modules/2.4.31-dbox2/kernel/net/sunrpc/sunrpc.o

Using /lib/modules/2.4.31-dbox2/kernel/fs/lockd/lockd.o

Using /lib/modules/2.4.31-dbox2/kernel/fs/nfs/nfs.o

Using /lib/modules/2.4.31-dbox2/kernel/fs/cifs/cifs.o

[AVS] i2c error -121

Starting pid 103, console /dev/console: '/etc/init.d/start'

 

Please press Enter to activate this console. cdkVcInfo $Id: cdkVcInfo.c,v 1.0 20

02/09/26 20:48:26 alexW Exp $

 

[AVS] i2c error -121

[AVS] i2c error -121

<14>Jan 1 01:00:28 camd3: BOXTYPE: 1

<14>Jan 1 01:00:28 camd3: LOG: 2

<14>Jan 1 01:00:29 camd3: UDP_PORT: 20248

<14>Jan 1 01:00:29 camd3: original slot au on

<14>Jan 1 01:00:29 camd3: SOCKET: /tmp/camd.socket

<14>Jan 1 01:00:29 camd3: KEYS: /var/keys/camd3.keys

<14>Jan 1 01:00:29 camd3: SERVERS: /var/keys/camd3.servers

<14>Jan 1 01:00:29 camd3: USERS: /var/keys/camd3.users

<14>Jan 1 01:00:29 camd3: Slot /dev/tts/1: initialisiere...

<14>Jan 1 01:00:30 camd3: Slot /dev/tts/1: starte Monitor...

<14>Jan 1 01:00:30 camd3: Slot /dev/tts/1: bereit

<14>Jan 1 01:00:30 camd3: /var/keys/camd3.servers: HOST=192.168.0.25 PORT=20248

 

<14>Jan 1 01:00:30 camd3: USER=benutzer1 PASS=password1 SERVICES=All

<14>Jan 1 01:00:31 camd3: UserDB(neu): USER=benutzer2 PASS=password2 SERVICES=A

lle,

<14>Jan 1 01:00:31 camd3: KeyDB: gestartet

<14>Jan 1 01:00:31 camd3: camd v3.810 - erfolgreich gestartet

[AVS] i2c error -121

[AVS] i2c error -121

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

sh: cannot open /share/keymaps/eng.kmap: No such file

[AVS] i2c error -121

[AVS] i2c error -121

[AVS] i2c error -121

[AVS] i2c error -121

[AVS] i2c error -121

saa7126_readbuf: i2c read error (ret == -121)

[AVS] i2c error -121

[AVS] i2c error -121

[AVS] i2c error -121

[AVS] i2c error -121

[AVS] i2c error -121

[AVS] i2c error -121

[AVS] i2c error -121

 

 

 

Was kann bedeuten?

 

andere img wollen auch nicht mehr! Er hat schon kalibo probiert. das läuft 5 min und geht denn aus

 

DBox 2 --> Nokia 2xI AVIA 600L

 

Ist der Tuner defekt?

 

Bitte helft uns!!!

 

Danke!

 

Gruß,

Peter

bearbeitet von Modern World
Link zu diesem Kommentar
Auf anderen Seiten teilen
abwl

abwl

Geschrieben
Geschrieben

Als erstes editiere mal deine dsID weg :P

 

Nun zum Problem. Die Meldung [AVS] i2c error -121 deutet auf einen Fehler im i2c-Bus hin. Der steuert jede Menge Systemteile und den Fehler zu identifizieren dürfte quasi unmöglich sein. Der hardwareschaden am Bus ist auch nicht reparabel.

Link zu diesem Kommentar
Auf anderen Seiten teilen
 Share
Gehe zur Themenübersicht

  • Wer ist Online   0 Benutzer

    • Keine registrierten Benutzer online.
×
×
  • Neu erstellen...