Gast dboxsurfer Geschrieben 9. April 2004 Melden Share Geschrieben 9. April 2004 Mein Problem TROTZ aller Anleitungen/Tipps/Threads die ich gelesen habe: Ich versuche bei meiner dbox2 (Phillips 2xI) das aktuelle Image auszulesen, um diese später mit einem neuen zu flashen. Betriebssystem XP, Crossover & Nullmodem Kabel, 10/100 LAN-Adapter auf 10Mibt Halbduplex. DboxIP: 192.168.0.2 (so auch im Bootmanager eingestellt) Rechner-IP: 192.168.0.5 Sobald ich auf "Image auslesen" klicke und die DBOX "resette" zeigt der Bootmanager "Pinging DBOXII...failed" und die Box bootet ganz normal. Erst am Ende des Bootvorgangs kommt dann "Pinging DBOXII ok ms". Habe schon alles möglich ausprobiert, u.a. Patch eingespielt, Box starten mit Pfeil nach oben,..., aber kein Erfolg. Hier mein Log: debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS debug: BMon V1.0 mID 02 debug: feID 00 enxID 03 debug: fpID 52 dsID 01-4f.6a.94.07.00.00-55 debug: HWrev 01 FPrev 0.30 debug: B/Ex/Fl(MB) 32/00/08 dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/philips-dbox2/kernel/os in Flash-FS debug: Got Block #0052 will verify ELF image, start= 0x800000, size= 200660 verify sig: 262 Branching to 0x40000 PPCBoot 1.1.6 (TuxBox) (Nov 16 2002 - 10:23:37) CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache Watchdog enabled Board: DBOX2, Phillips I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ........ done. LCD: ready FB: loading - ready In: serial Out: serial Err: serial Options: 1: framebuffer on ttyS0 2: framebuffer on fb0 3: framebuffer on null Select option (1-3), other keys to stop autoboot: 0 ............................................................... Un-Protected 63 sectors ### FS (jffs2) loading 'vmlinuz' to 0x100000 ### FS load compleate: 647481 bytes loaded to 0x100000 ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 647417 Bytes = 632 kB = 0 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.19 (genial) #12 Sam Nov 16 19:45:12 CET 2002 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock/2 rw console=ttyS0 Decrementer Frequency = 247500000/60 mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000) Console: colour dummy device 80x25 Calibrating delay loop... 65.53 BogoMIPS Memory: 30820k available (1136k kernel code, 344k data, 68k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.1. © 2001, 2002 Red Hat, Inc., designed by Axis Communications AB. i2c-core.o: i2c core module CPM UART driver version 0.03 ttyS00 at 0x0280 is a SMC ttyS01 at 0x0380 is a SMC pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:2d:1c:f2 D-Box 2 flash driver (size->0x800000 mem->0x10000000) Using word write method Creating 5 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "ppcboot (flfs)" 0x00040000-0x00800000 : "root (jffs2)" 0x00020000-0x00800000 : "flash without bootloader" 0x00000000-0x00800000 : "complete flash" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (jffs2 filesystem). Mounted devfs on /dev Freeing unused kernel memory: 68k init init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caUsing /lib/modu les/2.4.19/misc/i2c-8xx.o [i2c-8xx]: mpc 8xx i2c init i2c-core.o: adapter registered as adapter 0. [i2c-8xx]: adapter: 0 Using /lib/modules/2.4.19/misc/info.o Using /lib/modules/2.4.19/kernel/drivers/input/input.o Using /lib/modules/2.4.19/kernel/drivers/input/evdev.o Using /lib/modules/2.4.19/misc/event.o event: init ... Using /lib/modules/2.4.19/misc/saa7126.o i2c-core.o: driver i2c saa7126 driver registered. i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0). Using /lib/modules/2.4.19/misc/avs.o i2c-core.o: driver i2c audio/video switch driver registered. i2c-core.o: client [sTV6412] registered to adapter [](pos. 1). Using /lib/modules/2.4.19/misc/fp.o i2c-core.o: driver DBox2 Frontprocessor driver registered. i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2 ). fp.o: clear_wakeup_timer [0][0] Using /lib/modules/2.4.19/misc/dvb_demux.o Using /lib/modules/2.4.19/misc/dvbdev.o Using /lib/modules/2.4.19/misc/avia.o Using /lib/modules/2.4.19/misc/dmxdev.o Using /lib/modules/2.4.19/misc/cam.o AVIA: $Id: avia_core.c,v 1.32 2002/09/24 17:50:19 Jolt Exp $ der moment ist gekommen... Using /lib/modules/2.4.19/misc/dvb_frontend.o i2c-core.o: driver DBox2-CAM registered. CAM: attaching CAM at 0x6e i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3). CAM: attached to adapter Using /lib/modules/2.4.19/misc/lcd.o lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface on 2 write 1 event's ... write 1 event's ... initializing core... adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) Intializing font cache... Using /lib/modules/2.4.19/misc/avia_gt.o avia_gt_core: $Id: avia_gt_core.c,v 1.23 2002/10/05 15:01:12 Jolt Exp $ avia_gt_core: autodetecting chip type... AViA eNX found avia_gt_enx: $Id: avia_gt_enx.c,v 1.13 2002/09/02 19:25:37 Jolt Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.8 2002/10/13 21:16:15 Jolt Exp $ avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.134 2002/09/21 00:00:08 Jolt Exp $ avia_gt_dmx: Successfully loaded ucode V0.14 ENX-INITed -> 0 there MIGHT be no TS avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning... avia_gt_gv: $Id: avia_gt_gv.c,v 1.25 2002/10/11 09:57:54 Jolt Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19 2002/10/03 11:12:42 thegoodguy Exp $ avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17 2002/10/05 15:01:12 Jolt Exp $ avia_gt_core: Loaded AViA eNX/GTX driver Using /lib/modules/2.4.19/misc/dvb.o Using /lib/modules/2.4.19/misc/dvb.o insmod: A module named dvb already exists Init TDA8044H Using /lib/modules/2.4.19/misc/tda8044h.o i2c-core.o: driver TDA8044H DVB DECODER registered. tda8044h.c: attaching TDA8044H at 0xd0 i2c-core.o: client [TDA8044H] registered to adapter [](pos. 4). Using /lib/modules/2.4.19/misc/avia_gt_napi.o avia_gt_napi: $Id: avia_gt_napi.c,v 1.130 2002/09/18 15:57:24 Jolt Exp $ avia_gt_napi: hardware section filtering disabled. Using /lib/modules/2.4.19/misc/avia_gt_vbi.o avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.16 2002/08/22 13:39:33 Jolt Exp $ avia_gt_vbi: got demux C-Cube - AViA eNX/GTX Using /lib/modules/2.4.19/misc/avia_gt_fb.o avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.36 2002/08/22 13:39:33 Jolt Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device Using /lib/modules/2.4.19/misc/avia_gt_proc.o avia_gt_proc: $Id: avia_gt_proc.c,v 0.7 2002/10/12 13:38:30 NoClue $ cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $ [CBasicClient] connect failed. /tmp/sectionsd.sock: No such file or directory $Id: sectionsd.cpp,v 1.139 2002/10/15 20:39:47 woglinde Exp $ caching 72 hours events are old 60min after their end time [camd] 1.CMD-Class 0xE0 [camd] no card is in slot #2 [camd] a card is in slot #1 [camd] ca system id: 1702 [camd] no card is in slot #2 [camd] a card is in slot #1 $Id: zapit.cpp,v 1.268 2002/10/28 22:47:21 thegoodguy Exp $ [zapit] Using /bin/emu/camd for Emu mode. [getservices.cpp] going to parse satellite Astra 19.2E [zapit] LoadServices: success [zapit] reading Bouquets ................................................ [zapit] Found 48 bouquets. [zapit] channels have been loaded succesfully [camd] no card is in slot #2 [camd] a card is in slot #1 [camd] no card is in slot #2 [camd] a card is in slot #1 [nhttpd] Neutrino HTTP-Server starting.. killall: aniplay: no process killed Network LCD-Driver $Id: lcdd.cpp,v 1.57 2002/10/17 10:16:35 thegoodguy Exp $ [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [lcdd] load config initializing core... adding font /share/fonts/micron.ttf...OK (Micron/Regular) Intializing font cache... FTC_Face_Requester (Micron/Regular) Controld $Id: controld.cpp,v 1.78 2002/11/05 19:47:21 obi Exp $ [controld] Boxtype detected: (02, 2, 3, Philips) set event: 00000009 [controld] Unknown aspectRatio: 0[controld] setting VideoFormat to auto [neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.344 2002/10/16 16:25:24 gbox-Version Exp $ [neutrino] New Options : neutrino [-key] (Keyeditor) [-gbox] (gboxMenu) [-cug] ( Keyeditor+gboxMenu) [neutrino] frameBuffer Instance created [neutrino] vcrControl Instance created 1024k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] enable flash [neutrino] Software update enabled [neutrino] gbox Menu / gbox Info / Keyedit Feature enabled ! IP : 192.168.0.2 Netmask : 255.255.255.0 Broadcast: 192.168.0.255 Gateway : [neutrino] menue setup [CHTTPUpdater] HTTP-Basepath: [CHTTPUpdater] Image-Filename: cdk.cramfs [CHTTPUpdater] Version-Filename: cdk.cramfs.version loading locales: scandir: No such file or directory [controld] setting VideoFormat to auto video notify: videomenu.videoformat [neutrino] control event register [neutrino] sectionsd event register [neutrino] zapit event register [neutrino] timerd event register [CPlugins] Dir: /lib/tuxbox/plugins/ [CFrontend::setFrontend] freq 1509500 [CPlugins] 12 plugins found... [CFrontend::getEvent] FE_FAILURE_EV zap failed! initial zap failed - rezap [CFrontend::setFrontend] freq 1509500 [CFrontend::getEvent] FE_FAILURE_EV zap failed! Bin für jeden Tipp dankbar!!! Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast easytv Geschrieben 9. April 2004 Melden Share Geschrieben 9. April 2004 Steht doch ganz oben. boot net failed Nimm halt die Methode mit der Pfeil-nach-oben Taste. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast Fearactor Geschrieben 9. April 2004 Melden Share Geschrieben 9. April 2004 Sobald ich auf "Image auslesen" klicke und die DBOX "resette" zeigt der Bootmanager "Pinging DBOXII...failed" und die Box bootet ganz normal. Erst am Ende des Bootvorgangs kommt dann "Pinging DBOXII ok ms". das ist egal, ob der das anzeigt! bei mir kommt das 'nie', aber trotzdem kann ich alles machen (flashen,auslesen,...) Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast easytv Geschrieben 9. April 2004 Melden Share Geschrieben 9. April 2004 Wer sollte denn beim flashen/auslesen eine ping beantworten? Das ppcboot hat keinen vollwertigen TCPIP-Stack on board. Wozu auch. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast dboxsurfer Geschrieben 9. April 2004 Melden Share Geschrieben 9. April 2004 OK,OK, habe es mit der "Pfeil-nach oben" Methode probiert, danach "boot net". Ergebnis: [CFrontend::getEvent] FE_FAILURE_EV zap failed! initial zap failed - rezap [CFrontend::setFrontend] freq 1509500 debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS debug: BMon V1.0 mID 02 debug: feID 00 enxID 03 debug: fpID 52 dsID 01-4f.6a.94.07.00.00-55 debug: HWrev 01 FPrev 0.30 debug: B/Ex/Fl(MB) 32/00/08 debug: &_text 0x10000, &_etext 0x26d40, &_data 0x26d40, &_edata 0x2a83c debug: &_end 0x357c4, &__stack 0x400000 debug: Memory tests (0x400000 -- 0x2000000) debug: NumberTest: debug: passed debug: MarchTest: debug: passed debug: PermTest: debug: passed dbox2:root> boot net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.0.5, My IP 192.168.0.2 debug: Sending TFTP-request for file C/Programme/Bootmgr/ppcboot_readflash will verify ELF image, start= 0x800000, size= 207138 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 ppcboot 0.6.4 (Sep 19 2001 - 20:10:10) Initializing... CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache Board: ### No HW ID - assuming TQM8xxL DRAM: (faked) 32 MB Ethernet: 00-50-9c-2d-1c-f2 FLASH: 8 MB Input: serial Output: serial anykey druecken um flash auslesen abzubrech 0 BOOTP broadcast 1 Bootp from server 84.0.4.38; our IP address is 0.0.0.0 Sending Flash over UDP nochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnoc hmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochma lnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalno chmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochm alnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmaln ochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnoch ....... Das ist doch wohl nicht normal.... Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast dboxsurfer Geschrieben 9. April 2004 Melden Share Geschrieben 9. April 2004 ahhhh, jetzt läufts... K.A wieso, aber es scheint zu tun.... Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Schnukiputz Geschrieben 9. April 2004 Melden Share Geschrieben 9. April 2004 Um dein Image zu sichern brauchst du nicht den Bootmanager. Es gibt zwei einfachere möglichkeiten. 1. In der Box unter DBox/Service/Software-Aktualisierung/Experten-Funktionen/einzelne Partition auslesen/flash without bootloader wird das image im tmp Verzeichnis der Box abgespeichert. Du brauchst es dann nur noch per FTP auf deine Festplatte zu Kopieren. 2. Ein Programm um ein Image Backup zu machen. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge