klpos1192
-
Gesamte Inhalte
16 -
Benutzer seit
Inhaltstyp
Profile
Forum
Kalender
Downloads
Blogs
Galerie
Articles
Beiträge erstellt von klpos1192
-
-
@ Markham
Hast du mir ein Beispiel dass ich schauen kann, ob das setconsole erfolgreich war?
coolstream login: root
Password:
/var # setconsole
/var #
momentan kam zumindest noch nichts... also beim ziehen und wieder stecken des sticks...
Danke schonmal!
-
@Thendic
Unter Einstellungen/Netztwerk
1. Wifi Treiber = Realtek
2. Netzwerkname und Netzwerkpasswort eingeben.
2. Wifi starten auf ein, dann Neustart
3. Nach Neustart -> Schnittstelle auf wlan0 einstellen.
4. NeustartFertig.Falls es danach immer noch nicht funktioniert, erstelle bitte mit diesen Einstellungen ein Boolog.
Ich habe eine neue Neo Twin Cable, hab das KW Image 2.01Feb installiert. Das läuft soweit.
Ich bekomm WLAN net hin.Hab den Digitus 150N (DN-7042-1).Hab deine Anleitung durchgeführt, aber es kommt nie die Möglichkeit die Schnittstelle auf wlan0 umzustellen. "Schnittstelle" ist ausgegraut und es steht auf "eth0".Hat wer ne idee? Das ist doch der Realtek Chipsatz. Auf den hab ich es eingestellt.
-
Gelöst!
Mh, ich dachte immer, dass beim Keywelt Image auch der Kernel mit geflasht wird. Aber klar, macht natürlich sinn, wenn der neuer ist!
Also mal wieder Danke an Euch!
Hab es exakt nach der Anleitung gemacht, falls es mal jemand nachmachen will:
Keywelt Image wie oben beschrieben runtergeladen und in system.img umbenannt. Kernel uImage in kernel.img umbenannt und dann mit dem USB Stick im Ordner coolstream geflasht.
Gruß und schönen Abend!
-
Hi, vielen Dank für die Rückmeldung.
Das Image habe ich von hier: http://www.keywelt-board.com/index.php?/files/file/634-image-cs-keywelt-v160-marz/
Die rar Datei entpacke ich und erhalte: CS_201203101209_KEYWELT_V1.60_Mar.img.
Diese Datei packe ich per FTP in0:/tmp/.
Im Neutrino gehe ich auf Service--> Software-Aktualisierung
Dort unter Update-Einstellung "von lokalem Update-Verzeichnis", dieses steht auf /tmp
Dann klicke ich auf Lokales Update und dann suche ich dort das CS_201203101209_KEYWELT_V1.60_Mar.img.
Die Installation muss ich mit "Ja" bestätigen. Dann läuft die Aktualisierung.
Danach "Das Image wurde erfolgreich geflashed" und dann ein automatischer Reboot und dann "Boot Kernel" und das BootLog wie oben.
Ich dachte ich hätte das immer so gemacht?! Hab ich einen Denkfehler?!
-
Hallo zusammen,
ich habe mit meiner Box (die wegen einem Defekt eingeschickt wurde) nun auch das Problem, dass ich das Keywelt-Image nicht mehr gestartet bekomme.
Das Original-Image 2.10 läuft wunderbar.
Ich habe das Keywelt-Image 1.50 und 1.60 versucht, bei beiden tritt folgendes auf:
Beim Booten bleibt die Box bei "Boot Kernel" stehen. Unten stehend der BootLog. Es ist eine Neo Kabel. Es kommen viele Fehler, kann aber nicht erkennen auf was das zurückzuführen ist.
Jemand eine Idee?
Ich bekomme die Box per USB-Stick so wie oben beschrieben wieder auf den Original Zustand zurück und mit dem Original-Image bootet sie auch wieder. Ich hab es versucht, das Keywelt Image als system.img auf dem Stick zu haben oder ich flashe es über Software Aktualisierung Manuell über tmp. Nichts tut.
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.11.19 19:45:43 =~=~=~=~=~=~=~=~=~=~=~=
Restarting system.
[2h[61"p[m[44m[37m[1m[2J[1;1H[(B[)B[?3l[?9hÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º U-Boot 2009.03-svn1773 (Nov 02 2010 - 15:25:47) Coolstream HDx º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º Chipset information º
º Vendor: Conexant Type: CX2450x (Nevis) Revision: D0 Fuses: 7EFE6D24 º
º Option: 00010000 max. clock: 600 MHz Core voltage: high º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º Clock information º
º MPG0: 594.000 MHz MPG1: 594.000 MHz HD : 593.407 MHz AUD : 491.520 MHz º
º PLL0: 432.000 MHz PLL1: 594.000 MHz PLL2: 533.333 MHz º
º CPU : 594.000 MHz from PLL1 º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º Memory configuration º
º Start ³ End ³ Type ³ Description º
ºÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º 00000000 ³ 0FFFFFFF ³ RAM ³ System main memory bank #0 º
º 10000000 ³ 17FFFFFF ³ RAM ³ System main memory bank #1 º
º F0000000 ³ F1FFFFFF ³ FLASH ³ Spansion S29GL256P (256 Mbit / 16M x 16) º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º Serial number: ###-######## (##-######) º
º *** Warning - bad CRC, using default environment *** º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º Network configuration º
º MAC: Conexant VMAC rev. 07 address: 00-C5-C5-A7-36-B4 º
º PHY: IC Plus IP101 address: 09 º
Error: Bad gzipped data
Error: no valid bmp or bmp.gz image at f0060000
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Hit any key to stop autoboot: 1 0
## Booting kernel from Legacy Image at f0080000 ...
Image Name: Coolstream HDx Kernel
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2116856 Bytes = 2 MB
Load Address: 00048000
Entry Point: 00048000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Linux version 2.6.34.13-nevis (root@mh) (gcc version 4.6.3 (crosstool-NG 1.15.0) ) #1 Thu Oct 18 13:40:03 MSK 2012
CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv7), cr=00c5387f
CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
Machine: CoolStream HDx IRD
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536
Kernel command line: console=ttyRI0 mtdparts=cx2450xflash:384k(U-Boot)ro,128k(Splash),4096k(kernel),28160k(systemFS) root=mtd3 rootfstype=jffs2 rw mem=384M
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 384MB = 384MB total
Memory: 385404k/385404k available, 7812k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0x98800000 - 0xe0000000 (1144 MB)
lowmem : 0x80000000 - 0x98000000 ( 384 MB)
modules : 0x7e800000 - 0x80000000 ( 24 MB)
.init : 0x80048000 - 0x80062000 ( 104 kB)
.text : 0x80062000 - 0x80423000 (3844 kB)
.data : 0x80424000 - 0x804418c0 ( 119 kB)
NR_IRQS:352
Console: colour dummy device 80x30
console [ttyRI0] enabled
Calibrating delay loop... 593.10 BogoMIPS (lpj=2965504)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.22.1.
cfg80211: Calling CRDA to update world regulatory domain
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
msgmni has been set to 752
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
ttyRI0 at MMIO 0xe0412000 (irq = 2) is a CX2450x UART
brd: module loaded
loop: module loaded
CX2450x MTD driver v1.0 (Oct 18 2012, 13:39:38) © Coolstream International Ltd.
cx2450xflash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
cx2450xflash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
4 cmdlinepart partitions found on MTD device cx2450xflash
Creating 4 MTD partitions on "cx2450xflash":
0x000000000000-0x000000060000 : "U-Boot"
0x000000060000-0x000000080000 : "Splash"
0x000000080000-0x000000480000 : "kernel"
0x000000480000-0x000002000000 : "systemFS"
arcvmac arcvmac: ARC VMAC at 0x80428570 irq 24 00:c5:5c:00:26:a3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
cx2450x-ehci cx2450x-ehci.0: Trident CX2450X EHCI USB-Controller
cx2450x-ehci cx2450x-ehci.0: new USB bus registered, assigned bus number 1
cx2450x-ehci cx2450x-ehci.0: irq 13, io mem 0xe8000100
cx2450x-ehci cx2450x-ehci.0: USB 0.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Trident CX2450X EHCI USB-Controller
usb usb1: Manufacturer: Linux 2.6.34.13-nevis ehci_hcd
usb usb1: SerialNumber: cx2450x-ehci.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
cx2450x-ehci cx2450x-ehci.1: Trident CX2450X EHCI USB-Controller
cx2450x-ehci cx2450x-ehci.1: new USB bus registered, assigned bus number 2
cx2450x-ehci cx2450x-ehci.1: irq 17, io mem 0xe8001100
cx2450x-ehci cx2450x-ehci.1: USB 0.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: Trident CX2450X EHCI USB-Controller
usb usb2: Manufacturer: Linux 2.6.34.13-nevis ehci_hcd
usb usb2: SerialNumber: cx2450x-ehci.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
VFS: Mounted root (jffs2 filesystem) on device 31:3.
Freeing init memory: 104K
usb 2-1: new high speed USB device using cx2450x-ehci and address 2
usb 2-1: New USB device found, idVendor=05e3, idProduct=0718
usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
usb 2-1: Product: USB Storage
usb 2-1: SerialNumber: 000000000033
init started: BusyBox v1.18.4 (coolstream)
running /sbin/mknodes
rootdir=/dev
table=<stdin>
makedevs: line 16: can't create node console: File exists
done /sbin/mknodes
starting /etc/init.d/S00loadmodules ...
insmod: can't open '/lib/modules/2.6.34.13-nevis/cs_frontpanel.ko': No such file or directory
/dev/display: No such device or address
/dev/display: No such device or address
/dev/display: No such device or address
/dev/display: No such device or address
insmod: can't open '/lib/modules/2.6.34.13-nevis/cifs.ko': No such file or directory
/tmp/zapit.sock: No such file or directory
insmod: can't open '/lib/modules/2.6.34.13-nevis/fuse.ko': No such file or directory
insmod: can't open '/lib/modules/2.6.34.13-nevis/hid.ko': No such file or directory
insmod: can't open '/lib/modules/2.6.34.13-nevis/usbhid.ko': No such file or directory
insmod: can't open '/lib/modules/2.6.34.13-nevis/usbserial.ko': No such file or directory
insmod: can't open '/lib/modules/2.6.34.13-nevis/pl2303.ko': No such file or directory
insmod: can't open '/lib/modules/2.6.34.13-nevis/ftdi_sio.ko': No such file or directory
insmod: can't open '/lib/modules/2.6.34.13-nevis/cnxt_i2c.ko': No such file or directory
insmod: can't open '/lib/modules/2.6.34.13-nevis/cnxt_kal.ko': No such file or directory
insmod: can't open '/lib/modules/2.6.34.13-nevis/cnxt_base.ko': No such file or directory
insmod: can't open '/lib/modules/2.6.34.13-nevis/cnxt_fb.ko': No such file or directory
insmod: can't open '/lib/modules/2.6.34.13-nevis/cnxt_lnx.ko': No such file or directory
insmod: can't open '/lib/modules/2.6.34.13-nevis/cnxt_alsa.ko': No such file or directory
insmod: can't open '/lib/modules/2.6.34.13-nevis/cs_control.ko': No such file or directory
insmod: can't open '/lib/modules/2.6.34.13-nevis/stv6110.ko': No such file or directory
insmod: can't open '/lib/modules/2.6.34.13-nevis/stv090x.ko': No such file or directory
insmod: can't open '/lib/modules/2.6.34.13-nevis/tda10023.ko': No such file or directory
insmod: can't open '/lib/modules/2.6.34.13-nevis/avl2108.ko': No such file or directory
insmod: can't open '/lib/modules/2.6.34.13-nevis/max2112.ko': No such file or directory
insmod: can't open '/lib/modules/2.6.34.13-nevis/dvb-core.ko': No such file or directory
insmod: can't open '/lib/modules/2.6.34.13-nevis/cs_frontend.ko': No such file or directory
/dev/display: No such device or address
insmod: can't open '/lib/modules/2.6.34.13-nevis/cnxt_sata_drv.ko': No such file or directory
/dev/display: No such device or address
starting /etc/init.d/S01mount ...
starting /etc/init.d/S50hostname ...
starting /etc/init.d/S51networking ...
Configuring network interfaces... vmac_mii_bus: probed
arcvmac arcvmac: PHY driver [Generic PHY] (mii_bus:phy_addr=0:09, irq=-1)
udhcpc (v1.18.4) started
Sending discover...
opening CoolStream device failed!
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[dmx.cpp:Open:259] cnxt_tsroute_open: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[dmx.cpp:Open:261] cnxt_tsroute_set_packet_mode: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[dmx.cpp:Open:277] cnxt_dmx_open: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[dmx.cpp:Open:280] cnxt_dmx_attach: **** ERROR **** CNXT_STATUS_NOT_INIT
[dmx.cpp:Open:282] cnxt_tsroute_attach: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[dmx.cpp:Open:286] cnxt_dmx_set_cr_slave: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[dmx.cpp:Open:277] cnxt_dmx_open: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[dmx.cpp:Open:280] cnxt_dmx_attach: **** ERROR **** CNXT_STATUS_NOT_INIT
[dmx.cpp:Open:282] cnxt_tsroute_attach: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[dmx.cpp:Open:277] cnxt_dmx_open: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[dmx.cpp:Open:280] cnxt_dmx_attach: **** ERROR **** CNXT_STATUS_NOT_INIT
[dmx.cpp:Open:282] cnxt_tsroute_attach: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[dmx.cpp:Open:297] cnxt_dmx_reopen: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[dmx.cpp:Open:362] cnxt_cbuf_open: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[dmx.cpp:Open:368] cnxt_dmx_channel_open: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[dmx.cpp:Open:371] cnxt_dmx_channel_attach: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[dmx.cpp:Open:374] cnxt_cbuf_attach: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
Cannot open /dev/cs_control: No such device or address
FATAL: No such device
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:SetVideoSystem:1124] cnxt_drm_set_plane_enable: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:SetVideoSystem:1126] cnxt_drm_set_plane_enable: **** ERROR **** CNXT_STATUS_NOT_INIT
[video.cpp:SetVideoSystem:1129] cnxt_drm_set_plane_enable: **** ERROR **** CNXT_STATUS_NOT_INIT
[video.cpp:SetVideoSystem:1131] cnxt_drm_set_plane_enable: **** ERROR **** CNXT_STATUS_NOT_INIT
/dev/display: No such device or address
/dev/display: No such device or address
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:SetVideoSystem:1180] cnxt_tvenc_get_mode: **** ERROR **** CNXT_STATUS_NOT_INIT
[video.cpp:SetVideoSystem:1186] cnxt_tvenc_set_mode: **** ERROR **** CNXT_STATUS_INTERNAL_ERROR
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:SetVideoSystem:1191] cnxt_tvenc_get_video_standard
: **** ERROR **** CNXT_STATUS_NOT_INIT
[video.cpp:SetVideoSystem:1198] cnxt_tvenc_set_video_standard: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:SetVideoSystem:1224] cnxt_tvenc_get_video_standard
: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:SetVideoSystem:1230] cnxt_tvenc_set_video_standard: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:SetVideoSystem:1237] cnxt_drm_set_plane_enable: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:SetVideoSystem:1239] cnxt_drm_set_plane_enable: **** ERROR **** CNXT_STATUS_NOT_INIT
[video.cpp:SetVideoSystem:1242] cnxt_drm_set_plane_enable: **** ERROR **** CNXT_STATUS_NOT_INIT
[video.cpp:SetVideoSystem:1244] cnxt_drm_set_plane_enable: **** ERROR **** CNXT_STATUS_NOT_INIT
[video.cpp:ShowPicture:1304] cnxt_kal_sem_create: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:ShowPicture:1316] cnxt_cbuf_open: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:ShowPicture:1326] cnxt_video_open: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:ShowPicture:1349] cnxt_image_open: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:ShowPicture:1352] cnxt_drm_rgn_create: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:ShowPicture:1355] cnxt_drm_rgn_create: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:ShowPicture:1359] cnxt_drm_rgn_set_options: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:ShowPicture:1361] cnxt_drm_rgn_set_options: **** ERROR **** CNXT_STATUS_NOT_INIT
[video.cpp:ShowPicture:1369] cnxt_cbuf_attach: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:ShowPicture:1372] cnxt_video_attach: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:ShowPicture:1375] cnxt_video_attach: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:ShowPicture:1378] cnxt_image_attach: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:ShowPicture:1381] cnxt_image_attach: **** ERROR **** CNXT_STATUS_NOT_INIT
[video.cpp:ShowPicture:1383] cnxt_image_attach: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:ShowPicture:1386] cnxt_drm_attach: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:ShowPicture:1388] cnxt_drm_attach: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:ShowPicture:1430] cnxt_drm_set_video_blend_mode: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:ShowPicture:1433] cnxt_drm_set_video_blend_mode: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:ShowPicture:1436] cnxt_video_start: **** ERROR **** CNXT_STATUS_NOT_INIT
[video.cpp:ShowPicture:1442] cnxt_cbuf_write_data: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:ShowPicture:1475] cnxt_kal_sem_get: **** ERROR **** CNXT_STATUS_NOT_INIT
[video.cpp:ShowPicture:1477] cnxt_video_stop: **** ERROR **** CNXT_STATUS_NOT_INIT
[video.cpp:ShowPicture:1479] cnxt_drm_rgn_set_enable: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:ShowPicture:1481] cnxt_drm_rgn_set_enable: **** ERROR **** CNXT_STATUS_NOT_INIT
PHY: 0:09 - Link is Up - 100/Full
Sending discover...
/tmp/zapit.sock: No such file or directory
Sending select for 192.168.###.##...
Lease of 192.168.###.## obtained, lease time 864000
Starting wlan0
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory
ioctl[sIOCGIFFLAGS]: No such device
Could not get interface 'wlan0' flags
ioctl[sIOCSIWPMKSA]: No such device
ioctl[sIOCSIWMODE]: No such device
Could not configure driver to use managed mode
ioctl[sIOCGIWRANGE]: No such device
ioctl[sIOCGIFINDEX]: No such device
ioctl[iPW_IOCTL_WPA_SUPPLICANT]: No such device
Failed to set encryption.
ioctl[iPW_IOCTL_WPA_SUPPLICANT]: No such device
Failed to set encryption.
ioctl[iPW_IOCTL_WPA_SUPPLICANT]: No such device
Failed to set encryption.
ioctl[iPW_IOCTL_WPA_SUPPLICANT]: No such device
Failed to set encryption.
ioctl[iPW_IOCTL_WPA_SUPPLICANT]: No such device
ioctl[iPW_IOCTL_WPA_SUPPLICANT]: No such device
ioctl[iPW_IOCTL_WPA_SUPPLICANT]: No such device
ioctl[iPW_IOCTL_WPA_SUPPLICANT]: No such device
ioctl[sIOCSIWAP]: No such device
ioctl[sIOCGIFFLAGS]: No such device
/tmp/zapit.sock: No such file or directory
/tmp/zapit.sock: No such file or directory
ip: SIOCGIFFLAGS: No such device
Sat Jan 1 00:00:00 CET 2000
done.
starting /etc/init.d/S52syslogd ...
starting /etc/init.d/S60autofs ...
Jan 1 00:00:00 coolstream syslog.info syslogd started: BusyBox v1.18.4
starting /etc/init.d/S60rsyncd ...
starting /etc/init.d/S90inetd ...
Jan 1 00:00:00 coolstream daemon.info rsyncd[611]: rsyncd version 3.0.7 starting, listening on port 873
starting /etc/init.d/S95rescan-failed-drives ...
19 Nov 19:46:49 ntpdate[601]: step time server 130.###.#.## offset 406669609.373417 sec
starting /etc/init.d/S9L_logomask ...
starting /etc/init.d/S9T_tuxcald ...
starting /etc/init.d/S9T_tuxmaild ...
sh: 2012Oct18: bad number
/tmp/zapit.sock: No such file or directory
/tmp/zapit.sock: No such file or directory
Please press Enter to activate this console. /var/plugins/operations camd_init
/var/plugins/operations cardserver_start
/var/plugins/operations camd_start
/var/plugins/operations rezap
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:Flush:879] cnxt_cbuf_flush: **** ERROR **** CNXT_STATUS_NOT_INIT
[video.cpp:~cVideo:637] cnxt_cbuf_detach: **** ERROR **** CNXT_STATUS_NOT_INIT
[video.cpp:~cVideo:639] cnxt_video_detach: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:~cVideo:642] cnxt_video_detach: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:~cVideo:644] cnxt_image_detach: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:~cVideo:647] cnxt_image_detach: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:~cVideo:649] cnxt_drm_detach: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:~cVideo:652] cnxt_drm_rgn_destroy: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:~cVideo:655] cnxt_image_detach: **** ERROR **** CNXT_STATUS_NOT_INIT
[video.cpp:~cVideo:657] cnxt_drm_detach: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:~cVideo:660] cnxt_drm_rgn_destroy: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:~cVideo:695] cnxt_drm_close: **** ERROR **** CNXT_STATUS_NOT_INIT
[video.cpp:~cVideo:697] cnxt_tvenc_close: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:~cVideo:700] cnxt_image_close: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:~cVideo:702] cnxt_video_close: **** ERROR **** CNXT_STATUS_NOT_INIT
ERROR:cnxt_kal_sem_get:Semaphores not initialized yet
[video.cpp:~cVideo:704] cnxt_drm_close: **** ERROR **** CNXT_STATUS_NOT_INIT
[video.cpp:~cVideo:706] cnxt_tvenc_close: **** ERROR **** CNXT_STATUS_NOT_INIT
CSAPI: Not initialized!
/dev/fb/0: No such device
FBIOGET_FSCREENINFO: Bad file descriptor
/var/plugins/operations camd_exit
/var/plugins/operations cardserver_stop
/var/plugins/operations camd_stop
The system is going down NOW!
Sent SIGTERM to all processes
Nov 19 18:47:03 coolstream daemon.info init: The system is going down NOW!
Nov 19 19:47:03 coolstream syslog.info syslogd exiting
Sent SIGKILL to all processes
Requesting system halt
System halted.
Vielen Dank schon ein mal!
Gruß an alle.
WLAN-Problem KW-Image 2.01 DWA-131
in Das Keywelt-Image
Geschrieben
Also dann frisst die neo2 diesen Stick wirklich nicht. Hab's auch an ner neo probiert, an der ich so ein 150n Stick schon aktiv hatte und die wollte auch nicht. Ist schon eigenartig!
Danke für die Info mit dem Telnet! Ist gut zu wissen.