Jump to content

tben2010

Full Member
 Profil anzeigen  Aktivitäten des Benutzers anzeigen

  • Gesamte Inhalte

    16

  • Benutzer seit

  • Tagessiege

    1

 Inhaltstyp 

Beiträge erstellt von tben2010

  2. dbox findet keine Kanäle

    in Das Keywelt-Image

    Geschrieben · bearbeitet von merkwuerden
    Bitte Logfiles künftig in Spoiler-Tags setzen, damit der Thread lesbar bleibt

    Ok habe noch einen alten PC gefunden mit einer COM Schnittstelle, anbei mein Bootlog

     

     

     

    startet at 01.01.2004 00:06:10

    ------------------------------

    ------------------------------

    stopped at 01.01.2004 00:06:23

    startet at 01.01.2004 00:07:05

    ------------------------------

    ˝debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

    debug: BMon V1.0 mID 01

    debug: feID 7a gtxID 0b

    debug: fpID 5a dsID 01-f5.88.43.07.00.00-43

    debug: HWrev X5 SWrev 0.81

    debug: B/Ex/Fl(MB) 32/00/08

    WATCHDOG reset enabled

    dbox2:root> debug:

    BOOTP/TFTP bootstrap loader (v0.3)

    debug:

    debug: Transmitting BOOTP request via broadcast

    debug: Given up BOOTP/TFTP boot

    boot net failed

    Flash-FS bootstrap loader (v1.5)

    Found Flash-FS superblock version 3.1

    Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

    debug: Got Block #0032debug: Got Block #0004debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036

    will verify ELF image, start= 0x800000, size= 174720

    verify sig: 262

    Branching to 0x40100

    U-Boot 2011.06 (Tuxbox) (Jul 15 2011 - 08:36:14)

    CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

    *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***

    Board: DBOX2, Nokia, BMon V1.0

    Watchdog enabled

    I2C: ready

    DRAM: 32 MiB

    Flash: 8 MiB

    Scanning JFFS2 FS: . . | . / - \ | / - \ . done.

    env: found console with value ttyS0

    env: found lcd_inverse with value 0

    env: found lcd_contrast with value 15

    FB: ready

    In: serial

    Out: serial

    Err: serial

    Net: SCC

    LCD: ready

    Options:

    1: Console on null

    2: Console on ttyS0

    3: Console on framebuffer

    Select option (1-3), other keys to stop autoboot: 1 0

    ............................................................... done

    Un-Protected 63 sectors

    ### FS (squashfs) loading 'vmlinuz' to 0x200000

    ### FS load complete: 666609 bytes loaded to 0x200000

    ## Booting kernel from Legacy Image at 00200000 ...

    Image Name: Linux-2.4.37.11-dbox2

    Image Type: PowerPC Linux Kernel Image (gzip compressed)

    Data Size: 666545 Bytes = 650.9 KiB

    Load Address: 00000000

    Entry Point: 00000000

    Verifying Checksum ... OK

    Uncompressing Kernel Image ... OK

    Linux version 2.4.37.11-dbox2 (image@server) (gcc version 3.4.6) #5 Fr 15. Jul 08:37:12 CEST 2011

    On node 0 totalpages: 8192

    zone(0): 8192 pages.

    zone(1): 0 pages.

    zone(2): 0 pages.

    Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600 dbox_duplex=

    Decrementer Frequency = 252000000/60

    m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

    m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)

    Console: colour dummy device 80x25

    Calibrating delay loop... 66.96 BogoMIPS

    Memory: 30832k available (1132k kernel code, 344k data, 60k init, 0k highmem)

    Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

    Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

    Mount cache hash table entries: 512 (order: 0, 4096 bytes)

    Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

    Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

    POSIX conformance testing by UNIFIX

    Linux NET4.0 for Linux 2.4

    Based upon Swansea University Computer Society NET3.039

    Initializing RT netlink socket

    Starting kswapd

    devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

    devfs: boot_options: 0x1

    JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.

    squashfs: version 3.0 (2006/03/15) Phillip Lougher

    i2c-core.o: i2c core module version 2.6.1 (20010830)

    i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

    CPM UART driver version 0.04

    ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

    pty: 256 Unix98 ptys configured

    half-duplex mode enabled

    eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:40:14:df

    loop: loaded (max 8 devices)

    D-Box 2 flash driver (size->0x800000 mem->0x10000000)

    D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

    Intel/Sharp Extended Query Table at 0x0035

    cfi_cmdset_0001: Erase suspend on write enabled

    Creating 6 MTD partitions on "D-Box 2 flash memory":

    0x00000000-0x00020000 : "BR bootloader"

    0x00020000-0x00040000 : "FLFS (U-Boot)"

    0x00040000-0x005e0000 : "root (squashfs+lzma)"

    0x005e0000-0x00800000 : "var (jffs2)"

    0x00020000-0x00800000 : "Flash without bootloader"

    0x00000000-0x00800000 : "Complete Flash"

    Linux video capture interface: v1.00

    mice: PS/2 mouse device common for all mice

    NET4: Linux TCP/IP 1.0 for NET4.0

    IP Protocols: ICMP, UDP, TCP

    IP: routing cache hash table of 512 buckets, 4Kbytes

    TCP: Hash tables configured (established 2048 bind 4096)

    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

    VFS: Mounted root (squashfs filesystem) readonly.

    Mounted devfs on /dev

    Freeing unused kernel memory: 60k init

    init started: BusyBox v1.18.5 (2011-08-01 18:48:25 CEST)

    starting pid 8, tty '': '/etc/init.d/rcS'

    mount: using /etc/fstab

    ##### Image-Version: Keywelt_Jul2011_V1.00 #####

    Mon Aug 1 18:57:00 UTC 2011

    event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

    tuxbox: no IDE-Interface detected

    Detected STB:

    Vendor: Nokia

    Model: D-BOX2

    [i2c-8xx]: mpc 8xx i2c init

    [i2c-8xx]: adapter: 0

    $Id: cam.c,v 1.33 2011/06/19 11:49:27 rhabarber1848 Exp $

    $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

    DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

    dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

    $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

    avia_av: $Id: avia_av_core.c,v 1.106 2011/06/19 11:49:27 rhabarber1848 Exp $

    avia_av_core: Starting avia_av_wdt thread.

    avia_av: AVIA 500 LB4 found, sptsfix is off

    avia_av: microcode verify: 4 errors.

    avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

    avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $

    avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

    avia_gt_core: autodetecting chip type... GTX

    avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $

    avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

    avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.215 2011/06/19 11:51:17 rhabarber1848 Exp $

    avia_gt_core: masking unhandled irq reg 1 bit 11

    avia_gt_core: masking unhandled irq reg 1 bit 13

    avia_gt_ucode: loaded ucode v0014

    avia_gt_ucode: ucode section filters disabled.

    avia_gt_core: masking unhandled irq reg 0 bit 6

    avia_gt_core: masking unhandled irq reg 0 bit 7

    avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

    avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

    avia_gt_gv: set_input_size (width=720, height=576)

    avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

    avia_gt_pcm_set_rate(44100)

    avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

    avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

    avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

    avia_gt_core: Loaded AViA eNX/GTX driver

    avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

    avia_gt_gv: set_input_mode (mode=2)

    avia_gt_gv: set_input_size (width=720, height=576)

    avia_gt_gv: set_input_mode (mode=2)

    avia_gt_gv: set_input_size (width=720, height=576)

    avia_gt_gv: set_input_mode (mode=2)

    avia_gt_gv: set_input_size (width=720, height=576)

    Console: switching to colour frame buffer device 82x32

    avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

    lcd.o: init lcd driver module

    lcd.o: found KS0713/SED153X lcd interface

    avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

    avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

    avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $

    avia_gt_pcm_set_rate(44100)

    avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.14 2011/06/19 11:49:27 rhabarber1848 Exp $

    udhcpc (v1.18.5) started

    Setting IP address 0.0.0.0 on eth0

    Sending discover...

    Sending discover...

    Sending discover...

    No lease, forking to background

    wget: can't connect to remote host (127.0.0.1): Connection refused

    insmod: warning: kernel-module version mismatch

    ves1820 was compiled for kernel version 2.4.37-dbox2

    while this kernel is version 2.4.37.11-dbox2

    DVB: VES1820(0): pwm=0x48

    DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...

    avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

    avia_gt_napi: $Id: avia_gt_napi.c,v 1.208 2011/06/19 11:51:17 rhabarber1848 Exp $

    insmod: warning: kernel-module version mismatch

    multicam was compiled for kernel version 2.4.37-dbox2

    while this kernel is version 2.4.37.11-dbox2

    DBox2 Multicam Driver v1.01 skars & doz21 :D

    Loading /share/keymaps/i386/qwertz/de-latin1-nodeadkeys.kmap.gz

    starting pid 195, tty '': '/etc/init.d/start'

    Please press Enter to activate this console. kb2rcD 0.17 started [01.08.2011 - 20:57:26]

    kb2rcD <use 15 conversions>

    $Id: sectionsd.cpp,v 1.335 2011/06/19 12:31:44 rhabarber1848 Exp $

    [sectionsd] FreeSat enabled

    [sectionsd] Caching max 3000 events

    [sectionsd] Caching 4 days

    [sectionsd] Caching 12 hours Extended Text

    [sectionsd] Events are old 120min after their end time

    /var/tuxbox/config/zapit/epgfilter.xml: No such file or directory

    /var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory

    /var/tuxbox/config/mybouquets.xml: No such file or directory

    [timerd] woke up from timer? false!

    /var/plugins/operations camd_init

    /var/plugins/operations cardserver_start

    $Id: zapit.cpp,v 1.440k 2009/09/18 20:30:00 rhabarber1848 & Worschter & SnowHead Exp $

    [zapit] PMT update enabled

    [frontend] uncommitted_switch_mode 0 auto_fec 0

    /var/tuxbox/config/zapit/ubouquets.xml: No such file or directory

    /tmp/currentservices.xml: No such file or directory

    [controld] Boxtype detected: (1, Nokia D-BOX2)

    /var/plugins/operations sect_renice

    [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1

    [CVideo::setVideoFormat] output format: 4:3(LB)

    /var/plugins/operations camd_start

    neutrino: /lib/libpng12.so.0: no version information available (required by neutrino)

    neutrino: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0)

    starting /bin/neutrino

    [neutrino] frameBuffer Instance created

    812k video mem

    avia_gt_gv: set_input_mode (mode=2)

    avia_gt_gv: set_input_size (width=720, height=576)

    [neutrino] enable flash

    [neutrino] Software update enabled

    starte capmtserver

    capmtserver provides pmt info, for non-enigma platforms

    starte CCcam

    [lcdd] time-skin not found -> using default...

    [lcdd] weekday-skin not found -> using default...

    [lcdd] date-skin not found -> using default...

    [lcdd] month-skin not found -> using default...

    [LCDFONT] initializing core...

    [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)

    [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)

    [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)

    [LCDFONT] Intializing font cache...

    [LCDFONT] FTC_Face_Requester (Fix14/Bold)

    [neutrino] SetupFonts filename: /share/fonts/micron.ttf fontname: Micron

    [rcinput] no file /var/tuxbox/config/rc.conf was found

    /dev/input/event1: No such file or directory

    [neutrino] menue setup

    [neutrino] init menus...

    [neutrino] GUI-Personalize instance created...

    [neutrino] found esound, adding personalized esound entry to mainmenue

    [network config] Instance created

    [neutrino] setRepeat: delay=150 period=125 use kernel-repeat: no

    [neutrino] registering as event client

    [scan-setup] received 43 providers

    [sectionsd] getUTC: read: Connection timed out

    /bin/nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0)

    [yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)

    [LCDFONT] initializing core...

    [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)

    [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)

    [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)

    [LCDFONT] Intializing font cache...

    [yhttpd] Webserver starting...

    [sectionsd] getUTC: read: Connection timed out

    ------------------------------

    stopped at 01.01.2004 00:09:17

     

     

×
×
  • Neu erstellen...