0verd0g
-
Gesamte Inhalte
96 -
Benutzer seit
Inhaltstyp
Profile
Forum
Kalender
Downloads
Blogs
Galerie
Articles
Beiträge erstellt von 0verd0g
-
-
Hab auch besagtes WLAN Problem. Stick ist ein Digitus DN-7053-2, wird erkannt aber bekommt keine Verbindung. Loggt sich in der Fritzbox ein und gleich wieder aus. Mit dem 1.6er Image lief der problemlos. Hab mal Bootlogs erstellt, vielleicht kann da ja jemand was erkennen :
Keywelt 2.01
startet at 10.11.2013 15:25:09
------------------------------
[2h[61"p[m[44m[37m[1m[2J[1;1H[(B[)B[?3l[?9hÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º U-Boot 2009.03-svn1773 (Nov 02 2010 - 15:25:47) Coolstream HDx º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º Chipset information º
º Vendor: Conexant Type: CX2450x (Nevis) Revision: D0 Fuses: 7EFE6D24 º
º Option: 00010000 max. clock: 600 MHz Core voltage: high º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º Clock information º
º MPG0: 594.000 MHz MPG1: 594.000 MHz HD : 593.407 MHz AUD : 491.520 MHz º
º PLL0: 432.000 MHz PLL1: 594.000 MHz PLL2: 533.333 MHz º
º CPU : 594.000 MHz from PLL1 º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º Memory configuration º
º Start ³ End ³ Type ³ Description º
ºÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º 00000000 ³ 0FFFFFFF ³ RAM ³ System main memory bank #0 º
º 10000000 ³ 17FFFFFF ³ RAM ³ System main memory bank #1 º
º F0000000 ³ F1FFFFFF ³ FLASH ³ Spansion S29GL256P (256 Mbit / 16M x 16) º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º Serial number: 010-00002615 (0A-000A37) º
º *** Warning - bad CRC, using default environment *** º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º Network configuration º
º MAC: Conexant VMAC rev. 07 address: 00-C5-5C-00-0A-37 º
º PHY: IC Plus IP101 address: 09 º
Error: Bad gzipped data
Error: no valid bmp or bmp.gz image at f0060000
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Hit any key to stop autoboot: 1 0
## Booting kernel from Legacy Image at f0080000 ...
Image Name: Coolstream Kernel (compressed)
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2344340 Bytes = 2.2 MB
Load Address: 00048000
Entry Point: 00048000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Linux version 2.6.34.13-nevis (image@LAPTOP2) (gcc version 4.7.1 (crosstool-NG 1.16.0) ) #1 Tue Jan 1 01:59:46 CET 2013
CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv7), cr=00c5387f
CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
Machine: CoolStream HDx IRD
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536
Kernel command line: console=ttyRI0 mtdparts=cx2450xflash:384k(U-Boot)ro,128k(Splash),4096k(kernel),28160k(systemFS) root=mtd3 rootfstype=jffs2 rw mem=384M
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 384MB = 384MB total
Memory: 384928k/384928k available, 8288k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0x98800000 - 0xe0000000 (1144 MB)
lowmem : 0x80000000 - 0x98000000 ( 384 MB)
modules : 0x7e800000 - 0x80000000 ( 24 MB)
.init : 0x80048000 - 0x80063000 ( 108 kB)
.text : 0x80063000 - 0x8048c000 (4260 kB)
.data : 0x8048c000 - 0x804aeea0 ( 140 kB)
NR_IRQS:352
Console: colour dummy device 80x30
console [ttyRI0] enabled
Calibrating delay loop... 593.10 BogoMIPS (lpj=2965504)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
bio: create slab at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.22.1.
cfg80211: Calling CRDA to update world regulatory domain
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NetWinder Floating Point Emulator V0.97 (double precision)
Installing knfsd (copyright © 1996 okir@monad.swb.de).
JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
msgmni has been set to 751
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
ttyRI0 at MMIO 0xe0412000 (irq = 2) is a CX2450x UART
brd: module loaded
loop: module loaded
CX2450x MTD driver v1.0 (Jan 1 2013, 01:54:56) © Coolstream International Ltd.
cx2450xflash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
cx2450xflash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
4 cmdlinepart partitions found on MTD device cx2450xflash
Creating 4 MTD partitions on "cx2450xflash":
0x000000000000-0x000000060000 : "U-Boot"
0x000000060000-0x000000080000 : "Splash"
0x000000080000-0x000000480000 : "kernel"
0x000000480000-0x000002000000 : "systemFS"
arcvmac arcvmac: ARC VMAC at 0x80490580 irq 24 00:c5:5c:00:0a:37
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
cx2450x-ehci cx2450x-ehci.0: Trident CX2450X EHCI USB-Controller
cx2450x-ehci cx2450x-ehci.0: new USB bus registered, assigned bus number 1
cx2450x-ehci cx2450x-ehci.0: irq 13, io mem 0xe8000100
cx2450x-ehci cx2450x-ehci.0: USB 0.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Trident CX2450X EHCI USB-Controller
usb usb1: Manufacturer: Linux 2.6.34.13-nevis ehci_hcd
usb usb1: SerialNumber: cx2450x-ehci.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
cx2450x-ehci cx2450x-ehci.1: Trident CX2450X EHCI USB-Controller
cx2450x-ehci cx2450x-ehci.1: new USB bus registered, assigned bus number 2
cx2450x-ehci cx2450x-ehci.1: irq 17, io mem 0xe8001100
cx2450x-ehci cx2450x-ehci.1: USB 0.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: Trident CX2450X EHCI USB-Controller
usb usb2: Manufacturer: Linux 2.6.34.13-nevis ehci_hcd
usb usb2: SerialNumber: cx2450x-ehci.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
usb 2-1: new high speed USB device using cx2450x-ehci and address 2
usb 2-1: New USB device found, idVendor=0bda, idProduct=8172
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: RTL8191S WLAN Adapter
usb 2-1: Manufacturer: Manufacturer Realtek
usb 2-1: SerialNumber: 00e04c000001
VFS: Mounted root (jffs2 filesystem) on device 31:3.
Freeing init memory: 108K
init started: BusyBox v1.20.2 (2013-02-12 17:42:24 CET)
running /sbin/mknodes
rootdir=/dev
table=
makedevs: line 16: can't create node console: File exists
done /sbin/mknodes
starting /etc/init.d/S00loadmodules ...
cs_frontpanel: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
Frontpanel driver v0.12.0 (Dec 5 2012, 15:06:56) © Coolstream International Limited
[1;33mFrontpanel: wakeup source 2 time hi 0 lo 0
[0m==DriverVersion: v2.6.6.0.20120405==
register rtl8712_netdev_ops to netdev_ops
rtw_wdev_alloc
8712_usb_endpoint_descriptor(0):
bLength=7
bDescriptorType=5
bEndpointAddress=83
wMaxPacketSize=200
bInterval=0
8712_usb_endpoint_descriptor(1):
bLength=7
bDescriptorType=5
bEndpointAddress=4
wMaxPacketSize=200
bInterval=0
8712_usb_endpoint_descriptor(2):
bLength=7
bDescriptorType=5
bEndpointAddress=6
wMaxPacketSize=200
bInterval=0
8712_usb_endpoint_descriptor(3):
bLength=7
bDescriptorType=5
bEndpointAddress=d
wMaxPacketSize=200
bInterval=0
8712u : USB_SPEED_HIGH
nr_endpoint=4
Boot from EFUSE
Autoload OK!!
CustomerID = 0x 0
MAC Address from efuse= 0-2-72-b5-d1-b6
cfg80211_rtw_set_power_mgmt
usbcore: registered new interface driver r871x_usb_drv
rtw driver version=v3.4.3_4369.20120622
Build at: Dec 5 2012 15:05:54
usbcore: registered new interface driver rtl8192cu
Slow work thread pool: Starting up
Slow work thread pool: Ready
fuse init (API version 7.13)
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
CX2450x I2C-bus driver version 0.3b (Dec 5 2012, 15:06:57) © Coolstream International Limited
Memory configured as 2 banks
KAL over-allocation map ('x' = kernel, 'C' = cnxt):
<6>------- 0 ------------- to ------------ 256 ---------------
ooooooooooooxoooCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
<6>CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
<6>CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCxxxxxxxxxxxxxxxxxxxxxxx
<6>xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
<6>------- 256 ------------- to ------------ 512 ---------------
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCxxxxxxxx
<6>xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxoooooooxoooooooo
<6>................................................................
<6>................................................................
. = no RAM present
C = Conexant KAL
o = unutilized or Kernel RAM
KAL: Starting the KAL...
KAL Bank[0] cached @ V:0x8a400000 == P:0x0a400000, 5120 KB
KAL Bank[0] uncached @ V:0x83b00000 == P:0x03b00000, 107520 KB
KAL Bank[0] content @ V:0x81000000 == P:0x01000000, 44032 KB
KAL Bank[1] cached @ V:0x00000000 == P:0x00000000, 0 KB
KAL Bank[1] uncached @ V:0x91f00000 == P:0x11f00000, 25600 KB
KAL Bank[1] content @ V:0x90000000 == P:0x10000000, 31744 KB
KAL: Tiled physical region 0x01000000 to 0x03580000 (15)
KAL: Tiled physical region 0x10000000 to 0x11e00000 (15)
KAL: Module loaded
cnxt_base_drv: Initializing Edwards drivers...
cnxt_base_drv: Done initializing Edwards drivers.
cnxt_base_drv: Module loaded with major device 101
FB: cnxtfb_init_inst, plane OSD
FB: mode 1280x720p-50
FB: HD Mode: 1280x720 FrameRate 5
SD Mode: 720x576 FrameRate 2
1 RCR=0x153f00e
2 RCR=0x553f00e
MAC Address= 0-2-72-b5-d1-b6
fwdbg:Chnl: 00000006
rtw_cfg80211_init_wiphy:rf_config=1
fwdbg:RTL8712 FW version 0.0.1# Mon Apr 2 19:54:57 CST 2012 SVN:
fwdbg:Chip Version:00000002
fwdbg:HCI type: 00000012(00000004)
fwdbg:rf_cofig: 00000012(000000fe, 00000000, 00000000)
fwdbg:mp_mode: 00000000(00000001), IQK: 400000fc
fwdbg:vcs type: 00000002(00000001)
fwdbg:target thermal: 00000017, bt_coexist: 00000000
fwdbg:gd_powerGain = 0, KeepAliveBcnItvCnt = 350
fwdbg:bAutoloadOk: 00000001, ChnlPlan:00000002
fwdbg:->(00000001, 00000001, 00000001, 00000000)
r871x_wx_set_pmkid: IW_PMKSA_FLUSH!
set_mode = IW_MODE_INFRA
fwdbg:set opmode: 00000000
fwdbg:setAuth: 00000000
fwdbg:get survey cmd
fwdbg:Chnl: 00000001
fwdbg:Chnl: 00000002
fwdbg:Chnl: 00000003
fwdbg:Chnl: 00000004
fwdbg:Chnl: 00000005
fwdbg:Chnl: 00000006
fwdbg:Chnl: 00000007
fwdbg:Chnl: 00000008
fwdbg:Chnl: 00000009
fwdbg:Chnl: 0000000a
fwdbg:Chnl: 0000000b
fwdbg:Chnl: 0000000c
fwdbg:Chnl: 0000000d
fwdbg:8712 not supported 5G ch: 36
fwdbg:Chnl: 00000006
rtw_cfg80211_indicate_scan_done
rtw_cfg80211_indicate_scan_done without scan req
fwdbg:survey done(00000005, 00000000)
fwdbg:setAuth: 00000000
fwdbg:get join cmd
fwdbg:Chnl: 00000001
fwdbg:cur channel: 00000001, bcn interval: 00000064
fwdbg:link to Atheros AP
fwdbg:issue auth
fwdbg:issue assocreq(00000031)
fwdbg:mac id #5: 00000053, 00000fff, 00000000
rtw_cfg80211_indicate_connect(padapter=988f8000)
fwdbg:join res(00000001, 00000161)
fwdbg:issue assocreq(00000031)
fwdbg:mac id #5: 00000053, 00000fff, 00000000
fwdbg:join res(00000001, 00000161)
[logoview] done with Timeout...
/proc/cnxt_trace_flags created
# alsa_card_CX2450_init Success 8 , 116
cs_tsx_hsdp_set_port_speed: num: 594 denom: 7
cs_frontend version 0.6b
DVB: registering new adapter (cs_frontend_dvb)
stv090x_attach: Trying to attach STV090x demodulator(1)
DVB: Unable to find symbol cx24116_attach()
avl2108_attach: Attaching AVL2108 demodulator(0)
DVB: registering adapter 0 frontend 0 (AVL2108 Demodulator)...
cnxt_sata version 2.3cs
scsi0 : cnxt_sata
ata1: SATA max UDMA/133 irq 42
scsi1 : cnxt_sata
ata2: SATA max UDMA/133 irq 35
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
starting /etc/init.d/S01mount ...
starting /etc/init.d/S50hostname ...
starting /etc/init.d/S51networking ...
Configuring network interfaces... ifup: interface wlan0 already configured
Starting ifplugd... vmac_mii_bus: probed
arcvmac arcvmac: PHY driver [Generic PHY] (mii_bus:phy_addr=0:09, irq=-1)
Sat Jan 1 00:00:00 CET 2000
done.
starting /etc/init.d/S52syslogd ...
Jan 1 00:00:00 flash syslog.info syslogd started: BusyBox v1.20.2
starting /etc/init.d/S60autofs ...
fwdbg:get survey cmd
fwdbg:Chnl: 00000001
fwdbg:Chnl: 00000002
fwdbg:Chnl: 00000003
fwdbg:Chnl: 00000004
fwdbg:Chnl: 00000005
fwdbg:Chnl: 00000006
fwdbg:Chnl: 00000007
fwdbg:Chnl: 00000008
fwdbg:Chnl: 00000009
fwdbg:Chnl: 0000000a
fwdbg:Chnl: 0000000b
fwdbg:Chnl: 0000000c
PHY: 0:09 - Link is Down
fwdbg:Chnl: 0000000d
fwdbg:8712 not supported 5G ch: 36
fwdbg:Chnl: 00000001
rtw_cfg80211_indicate_scan_done
rtw_cfg80211_indicate_scan_done without scan req
fwdbg:survey done(00000006, 00000000)
fwdbg:setAuth: 00000000
fwdbg:issue_deauth
fwdbg:Chnl: 00000001
fwdbg:get join cmd
fwdbg:Chnl: 00000001
fwdbg:cur channel: 00000001, bcn interval: 00000064
fwdbg:link to Atheros AP
fwdbg:issue auth
fwdbg:issue assocreq(00000031)
fwdbg:mac id #5: 00000053, 00000fff, 00000000
rtw_cfg80211_indicate_connect(padapter=988f8000)
fwdbg:join res(00000001, 00000161)
fwdbg:get survey cmd
fwdbg:Chnl: 00000001
fwdbg:Chnl: 00000002
fwdbg:Chnl: 00000003
fwdbg:Chnl: 00000004
fwdbg:Chnl: 00000005
fwdbg:Chnl: 00000006
fwdbg:Chnl: 00000007
fwdbg:Chnl: 00000008
fwdbg:Chnl: 00000009
fwdbg:Chnl: 0000000a
fwdbg:Chnl: 0000000b
fwdbg:Chnl: 0000000c
fwdbg:Chnl: 0000000d
fwdbg:8712 not supported 5G ch: 36
fwdbg:Chnl: 00000001
rtw_cfg80211_indicate_scan_done
rtw_cfg80211_indicate_scan_done without scan req
fwdbg:survey done(00000006, 00000000)
fwdbg:setAuth: 00000000
fwdbg:issue_deauth
fwdbg:Chnl: 00000001
fwdbg:get join cmd
fwdbg:Chnl: 00000001
fwdbg:cur channel: 00000001, bcn interval: 00000064
fwdbg:link to Atheros AP
fwdbg:issue auth
fwdbg:issue assocreq(00000031)
fwdbg:mac id #5: 00000053, 00000fff, 00000000
rtw_cfg80211_indicate_connect(padapter=988f8000)
fwdbg:join res(00000001, 00000161)
Name server cannot be used, exiting 1 Jan 00:00:20 ntpdate[577]: name server cannot be used, reason: Temporary failure in name resolution
hostname: flash.cooli: Host name lookup failure
starting the automounter...
starting /etc/init.d/S90inetd ...
starting /etc/init.d/S95rescan-failed-drives ...
starting /etc/init.d/S96nfsd ...
starting /etc/init.d/S9A_rescue ...
Jan 1 00:00:20 flash daemon.err automount[585]: failed to load map, exiting
fwdbg:get survey cmd
fwdbg:Chnl: 00000001
fwdbg:Chnl: 00000002
fwdbg:Chnl: 00000003
fwdbg:Chnl: 00000004
fwdbg:Chnl: 00000005
fwdbg:Chnl: 00000006
fwdbg:Chnl: 00000007
fwdbg:Chnl: 00000008
fwdbg:Chnl: 00000009
fwdbg:Chnl: 0000000a
fwdbg:Chnl: 0000000b
fwdbg:Chnl: 0000000c
fwdbg:Chnl: 0000000d
fwdbg:8712 not supported 5G ch: 36
fwdbg:Chnl: 00000001
rtw_cfg80211_indicate_scan_done
rtw_cfg80211_indicate_scan_done without scan req
fwdbg:survey done(00000004, 00000000)
wx_get_scan, mcs_rate_bitmap=0x0
fwdbg:setAuth: 00000000
fwdbg:issue_deauth
fwdbg:Chnl: 00000001
fwdbg:get join cmd
fwdbg:Chnl: 00000001
fwdbg:cur channel: 00000001, bcn interval: 00000064
fwdbg:link to Atheros AP
fwdbg:issue auth
fwdbg:issue assocreq(00000031)
fwdbg:mac id #5: 00000053, 00000fff, 00000000
rtw_cfg80211_indicate_connect(padapter=988f8000)
fwdbg:join res(00000001, 000001b7)
wx_get_scan, mcs_rate_bitmap=0x0
fwdbg:get survey cmd
fwdbg:Chnl: 00000001
fwdbg:Chnl: 00000002
fwdbg:Chnl: 00000003
fwdbg:Chnl: 00000004
fwdbg:Chnl: 00000005
fwdbg:Chnl: 00000006
fwdbg:Chnl: 00000007
fwdbg:Chnl: 00000008
fwdbg:Chnl: 00000009
fwdbg:Chnl: 0000000a
fwdbg:Chnl: 0000000b
fwdbg:Chnl: 0000000c
fwdbg:Chnl: 0000000d
fwdbg:8712 not supported 5G ch: 36
fwdbg:Chnl: 00000001
rtw_cfg80211_indicate_scan_done
rtw_cfg80211_indicate_scan_done without scan req
fwdbg:survey done(00000004, 00000000)
wx_get_scan, mcs_rate_bitmap=0x0
fwdbg:setAuth: 00000000
fwdbg:issue_deauth
fwdbg:Chnl: 00000001
fwdbg:get join cmd
fwdbg:Chnl: 00000001
fwdbg:cur channel: 00000001, bcn interval: 00000064
fwdbg:link to Atheros AP
fwdbg:issue auth
fwdbg:issue assocreq(00000031)
fwdbg:mac id #5: 00000053, 00000fff, 00000000
rtw_cfg80211_indicate_connect(padapter=988f8000)
fwdbg:join res(00000001, 000001b7)
wx_get_scan, mcs_rate_bitmap=0x0
rescanning /sys/class/scsi_host/host0
ata1: hard resetting link
ata1: SATA link down (SStatus 0 SControl 300)
ata1: EH complete
rescanning /sys/class/scsi_host/host1
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 300)
ata2: EH complete
fwdbg:get survey cmd
fwdbg:Chnl: 00000001
fwdbg:Chnl: 00000002
fwdbg:Chnl: 00000003
fwdbg:Chnl: 00000004
fwdbg:Chnl: 00000005
fwdbg:Chnl: 00000006
fwdbg:Chnl: 00000007
fwdbg:Chnl: 00000008
fwdbg:Chnl: 00000009
fwdbg:Chnl: 0000000a
fwdbg:Chnl: 0000000b
Testmodus: Partition 3 oder Files wuerden jetzt geloescht werden
starting /etc/init.d/S9L_logomask ...
starting /etc/init.d/S9T_tuxcald ...
fwdbg:Chnl: 0000000c
starting /etc/init.d/S9T_tuxmaild ...
fwdbg:Chnl: 0000000d
fwdbg:8712 not supported 5G ch: 36
fwdbg:Chnl: 00000001
rtw_cfg80211_indicate_scan_done
rtw_cfg80211_indicate_scan_done without scan req
fwdbg:survey done(00000005, 00000000)
wx_get_scan, mcs_rate_bitmap=0x0
fwdbg:setAuth: 00000000
fwdbg:issue_deauth
fwdbg:Chnl: 00000001
fwdbg:get join cmd
Please press Enter to activate this console. /var/plugins/operations camd_init
/var/plugins/operations cardserver_start
fwdbg:Chnl: 00000001
fwdbg:cur channel: 00000001, bcn interval: 00000064
/var/plugins/operations camd_start
/var/plugins/operations rezap
fwdbg:link to Atheros AP
fwdbg:issue auth
fwdbg:issue assocreq(00000031)
fwdbg:mac id #5: 00000053, 00000fff, 00000000
rtw_cfg80211_indicate_connect(padapter=988f8000)
fwdbg:join res(00000001, 000001b7)
fwdbg:issue assocreq(00000031)
fwdbg:mac id #5: 00000053, 00000fff, 00000000
fwdbg:join res(00000001, 000001b7)
wx_get_scan, mcs_rate_bitmap=0x0
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
m_cBoxFrame.iHeight 662 m_cBoxFrameBrowserList.iHeight 331 m_settings.browserFrameHeight 50
avl2108_load_firmware: Waiting for firmware upload (dvb-fe-avl2108.fw)...
i2c i2c-0: firmware: requesting dvb-fe-avl2108.fw
avl2108_load_firmware: Waiting for firmware upload(2)...
avl2108_load_firmware: Firmware upload complete
[/home/image/coolstream/bs-cst-neutrino-hd/source/neutrino-hd/src/zapit/src/frontend.cpp:Open:191] /dev/dvb/adapter0/frontend1: No such file or directory
/var/tuxbox/config/zapit/services.xml: No such file or directory
/var/tuxbox/config/zapit/myservices.xml: No such file or directory
/var/tuxbox/config/zapit/bouquets.xml: No such file or directory
/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory
cs_tsx_hsdp_set_port_speed: num: 594 denom: 7
/var/tuxbox/config/deepstandby.off failed: No such file or directory
[0;33m[dvbsub @ 0x5c9680] Invalid extradata, subtitle streams may be combined!
00:00:58.985 [sectionsd] start
00:00:58.990 [sectionsd] starting
[0m/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
00:00:59.021 00:00:59.023 cnThread::run:: starting, pid 654 (1167074400)
00:00:59.024 freeSatThread::run:: starting, pid 654 (1175463008)
00:00:59.024 timeThread::run:: starting, pid 654 (1150297184)
eitThread::run:: starting, pid 654 (1158685792)
00:00:59.111 timeThread: getting DVB time (isOpen 1)
fwdbg:get survey cmd
fwdbg:Chnl: 00000001
fwdbg:Chnl: 00000002
fwdbg:Chnl: 00000003
fwdbg:Chnl: 00000004
fwdbg:Chnl: 00000005
fwdbg:Chnl: 00000006
fwdbg:Chnl: 00000007
fwdbg:Chnl: 00000008
fwdbg:Chnl: 00000009
fwdbg:Chnl: 0000000a
fwdbg:Chnl: 0000000b
fwdbg:Chnl: 0000000c
fwdbg:Chnl: 0000000d
fwdbg:8712 not supported 5G ch: 36
fwdbg:Chnl: 00000001
rtw_cfg80211_indicate_scan_done
rtw_cfg80211_indicate_scan_done without scan req
fwdbg:survey done(00000006, 00000000)
wx_get_scan, mcs_rate_bitmap=0x0
fwdbg:setAuth: 00000000
fwdbg:issue_deauth
fwdbg:Chnl: 00000001
fwdbg:get join cmd
fwdbg:Chnl: 00000001
fwdbg:cur channel: 00000001, bcn interval: 00000064
fwdbg:link to Atheros AP
fwdbg:issue auth
fwdbg:issue assocreq(00000031)
fwdbg:mac id #5: 00000053, 00000fff, 00000000
rtw_cfg80211_indicate_connect(padapter=988f8000)
fwdbg:join res(00000001, 000001b7)
wx_get_scan, mcs_rate_bitmap=0x0
logomask Version 1.2
fwdbg:get survey cmd
fwdbg:Chnl: 00000001
fwdbg:Chnl: 00000002
fwdbg:Chnl: 00000003
fwdbg:Chnl: 00000004
fwdbg:Chnl: 00000005
fwdbg:Chnl: 00000006
fwdbg:Chnl: 00000007
fwdbg:Chnl: 00000008
fwdbg:Chnl: 00000009
fwdbg:Chnl: 0000000a
fwdbg:Chnl: 0000000b
fwdbg:Chnl: 0000000c
fwdbg:Chnl: 0000000d
fwdbg:8712 not supported 5G ch: 36
fwdbg:Chnl: 00000001
rtw_cfg80211_indicate_scan_done
rtw_cfg80211_indicate_scan_done without scan req
fwdbg:survey done(00000005, 00000000)
fwdbg:setAuth: 00000000
fwdbg:issue_deauth
fwdbg:Chnl: 00000001
fwdbg:get join cmd
fwdbg:Chnl: 00000001
fwdbg:cur channel: 00000001, bcn interval: 00000064
fwdbg:link to Atheros AP
fwdbg:issue auth
fwdbg:issue assocreq(00000031)
fwdbg:mac id #5: 00000053, 00000fff, 00000000
rtw_cfg80211_indicate_connect(padapter=988f8000)
fwdbg:join res(00000001, 00000161)
fwdbg:get survey cmd
fwdbg:Chnl: 00000001
fwdbg:Chnl: 00000002
fwdbg:Chnl: 00000003
fwdbg:Chnl: 00000004
fwdbg:Chnl: 00000005
fwdbg:Chnl: 00000006
fwdbg:Chnl: 00000007
fwdbg:Chnl: 00000008
fwdbg:Chnl: 00000009
fwdbg:Chnl: 0000000a
fwdbg:Chnl: 0000000b
fwdbg:Chnl: 0000000c
fwdbg:Chnl: 0000000d
fwdbg:8712 not supported 5G ch: 36
fwdbg:Chnl: 00000001
rtw_cfg80211_indicate_scan_done
rtw_cfg80211_indicate_scan_done without scan req
fwdbg:survey done(00000007, 00000000)
fwdbg:setAuth: 00000000
fwdbg:issue_deauth
fwdbg:Chnl: 00000001
fwdbg:get join cmd
fwdbg:Chnl: 00000001
fwdbg:cur channel: 00000001, bcn interval: 00000064
fwdbg:link to Atheros AP
fwdbg:issue auth
fwdbg:issue assocreq(00000031)
fwdbg:mac id #5: 00000053, 00000fff, 00000000
rtw_cfg80211_indicate_connect(padapter=988f8000)
fwdbg:join res(00000001, 00000161)
00:01:35.132 timeThread: getting DVB time done : -1 messaging_neutrino_sets_time 1
00:01:35.133 timeThread: Time set FAILED (enabled: ntp 0 dvb 1)
00:01:35.134 timeThread: going to sleep 1 seconds, running 1 scanning 1
00:01:35.154 timeThread: going to sleep for 1 seconds...
00:01:36.162 timeThread: wakeup, running 1 scanning 1 channel 0 reason 110
00:01:36.170 timeThread: getting DVB time (isOpen 1)
fwdbg:get survey cmd
fwdbg:Chnl: 00000001
fwdbg:Chnl: 00000002
fwdbg:Chnl: 00000003
fwdbg:Chnl: 00000004
fwdbg:Chnl: 00000005
fwdbg:Chnl: 00000006
fwdbg:Chnl: 00000007
fwdbg:Chnl: 00000008
fwdbg:Chnl: 00000009
fwdbg:Chnl: 0000000a
fwdbg:Chnl: 0000000b
fwdbg:Chnl: 0000000c
fwdbg:Chnl: 0000000d
fwdbg:8712 not supported 5G ch: 36
fwdbg:Chnl: 00000001
rtw_cfg80211_indicate_scan_done
rtw_cfg80211_indicate_scan_done without scan req
fwdbg:survey done(00000006, 00000000)
wx_get_scan, mcs_rate_bitmap=0x0
fwdbg:setAuth: 00000000
fwdbg:issue_deauth
fwdbg:Chnl: 00000001
fwdbg:get join cmd
fwdbg:Chnl: 00000001
fwdbg:cur channel: 00000001, bcn interval: 00000064
fwdbg:link to Atheros AP
fwdbg:issue auth
fwdbg:issue assocreq(00000031)
fwdbg:mac id #5: 00000053, 00000fff, 00000000
rtw_cfg80211_indicate_connect(padapter=988f8000)
fwdbg:join res(00000001, 000001b7)
wx_get_scan, mcs_rate_bitmap=0x0
fwdbg:get survey cmd
fwdbg:Chnl: 00000001
fwdbg:Chnl: 00000002
fwdbg:Chnl: 00000003
fwdbg:Chnl: 00000004
fwdbg:Chnl: 00000005
fwdbg:Chnl: 00000006
fwdbg:Chnl: 00000007
fwdbg:Chnl: 00000008
fwdbg:Chnl: 00000009
fwdbg:Chnl: 0000000a
fwdbg:Chnl: 0000000b
fwdbg:Chnl: 0000000c
fwdbg:Chnl: 0000000d
fwdbg:8712 not supported 5G ch: 36
fwdbg:Chnl: 00000001
rtw_cfg80211_indicate_scan_done
rtw_cfg80211_indicate_scan_done without scan req
fwdbg:survey done(00000006, 00000000)
fwdbg:setAuth: 00000000
fwdbg:issue_deauth
fwdbg:Chnl: 00000001
fwdbg:get join cmd
fwdbg:Chnl: 00000001
fwdbg:cur channel: 00000001, bcn interval: 00000064
fwdbg:link to Atheros AP
fwdbg:issue auth
fwdbg:issue assocreq(00000031)
fwdbg:mac id #5: 00000053, 00000fff, 00000000
rtw_cfg80211_indicate_connect(padapter=988f8000)
fwdbg:join res(00000001, 00000161)
fwdbg:issue assocreq(00000031)
fwdbg:mac id #5: 00000053, 00000fff, 00000000
fwdbg:join res(00000001, 00000161)
fwdbg:get survey cmd
fwdbg:Chnl: 00000001
fwdbg:Chnl: 00000002
fwdbg:Chnl: 00000003
fwdbg:Chnl: 00000004
fwdbg:Chnl: 00000005
fwdbg:Chnl: 00000006
fwdbg:Chnl: 00000007
fwdbg:Chnl: 00000008
fwdbg:Chnl: 00000009
fwdbg:Chnl: 0000000a
fwdbg:Chnl: 0000000b
fwdbg:Chnl: 0000000c
fwdbg:Chnl: 0000000d
fwdbg:8712 not supported 5G ch: 36
fwdbg:Chnl: 00000001
rtw_cfg80211_indicate_scan_done
rtw_cfg80211_indicate_scan_done without scan req
fwdbg:survey done(00000002, 00000000)
wx_get_scan, mcs_rate_bitmap=0x0
fwdbg:setAuth: 00000000
fwdbg:issue_deauth
fwdbg:Chnl: 00000001
fwdbg:get join cmd
fwdbg:Chnl: 00000001
fwdbg:cur channel: 00000001, bcn interval: 00000064
fwdbg:link to Atheros AP
fwdbg:issue auth
fwdbg:issue assocreq(00000031)
fwdbg:issue assocreq(00000031)
fwdbg:mac id #5: 00000053, 00000fff, 00000000
rtw_cfg80211_indicate_connect(padapter=988f8000)
fwdbg:join res(00000001, 000001b7)
wx_get_scan, mcs_rate_bitmap=0x0
00:02:12.172 timeThread: getting DVB time done : -1 messaging_neutrino_sets_time 1
00:02:12.173 timeThread: Time set FAILED (enabled: ntp 0 dvb 1)
00:02:12.174 timeThread: going to sleep 1 seconds, running 1 scanning 1
00:02:12.194 timeThread: going to sleep for 1 seconds...
00:02:13.202 timeThread: wakeup, running 1 scanning 1 channel 0 reason 110
00:02:13.210 timeThread: getting DVB time (isOpen 1)
fwdbg:get survey cmd
fwdbg:Chnl: 00000001
fwdbg:Chnl: 00000002
fwdbg:Chnl: 00000003
fwdbg:Chnl: 00000004
fwdbg:Chnl: 00000005
fwdbg:Chnl: 00000006
fwdbg:Chnl: 00000007
fwdbg:Chnl: 00000008
fwdbg:Chnl: 00000009
fwdbg:Chnl: 0000000a
fwdbg:Chnl: 0000000b
fwdbg:Chnl: 0000000c
fwdbg:Chnl: 0000000d
fwdbg:8712 not supported 5G ch: 36
fwdbg:Chnl: 00000001
rtw_cfg80211_indicate_scan_done
rtw_cfg80211_indicate_scan_done without scan req
fwdbg:survey done(00000003, 00000000)
wx_get_scan, mcs_rate_bitmap=0x0
fwdbg:setAuth: 00000000
fwdbg:issue_deauth
fwdbg:Chnl: 00000001
fwdbg:get join cmd
fwdbg:Chnl: 00000001
fwdbg:cur channel: 00000001, bcn interval: 00000064
fwdbg:link to Atheros AP
fwdbg:issue auth
fwdbg:issue assocreq(00000031)
fwdbg:mac id #5: 00000053, 00000fff, 00000000
rtw_cfg80211_indicate_connect(padapter=988f8000)
fwdbg:join res(00000001, 000001b7)
wx_get_scan, mcs_rate_bitmap=0x0
fwdbg:get survey cmd
fwdbg:Chnl: 00000001
fwdbg:Chnl: 00000002
fwdbg:Chnl: 00000003
fwdbg:Chnl: 00000004
fwdbg:Chnl: 00000005
fwdbg:Chnl: 00000006
fwdbg:Chnl: 00000007
fwdbg:Chnl: 00000008
fwdbg:Chnl: 00000009
fwdbg:Chnl: 0000000a
fwdbg:Chnl: 0000000b
fwdbg:Chnl: 0000000c
fwdbg:Chnl: 0000000d
fwdbg:8712 not supported 5G ch: 36
fwdbg:Chnl: 00000001
rtw_cfg80211_indicate_scan_done
rtw_cfg80211_indicate_scan_done without scan req
fwdbg:survey done(00000005, 00000000)
wx_get_scan, mcs_rate_bitmap=0x0
fwdbg:setAuth: 00000000
fwdbg:issue_deauth
fwdbg:Chnl: 00000001
fwdbg:get join cmd
fwdbg:Chnl: 00000001
fwdbg:cur channel: 00000001, bcn interval: 00000064
fwdbg:link to Atheros AP
fwdbg:issue auth
fwdbg:issue assocreq(00000031)
fwdbg:issue assocreq(00000031)
fwdbg:mac id #5: 00000053, 00000fff, 00000000
rtw_cfg80211_indicate_connect(padapter=988f8000)
fwdbg:join res(00000001, 000001b7)
fwdbg:CMD SEQ is not Matched (00000012, 0000003a)
wx_get_scan, mcs_rate_bitmap=0x0
fwdbg:CMD SEQ is not Matched (0000003a, 0000003b)
00:02:49.212 timeThread: getting DVB time done : -1 messaging_neutrino_sets_time 1
00:02:49.213 timeThread: Time set FAILED (enabled: ntp 0 dvb 1)
00:02:49.214 timeThread: going to sleep 1 seconds, running 1 scanning 1
00:02:49.234 timeThread: going to sleep for 1 seconds...
00:02:50.242 timeThread: wakeup, running 1 scanning 1 channel 0 reason 110
00:02:50.250 timeThread: getting DVB time (isOpen 1)
fwdbg:issue keepalive null data
fwdbg:issue keepalive null data
wx_get_scan, mcs_rate_bitmap=0x0
fwdbg:CMD SEQ is not Matched (0000003b, 0000003c)
fwdbg:CMD SEQ is not Matched (0000003c, 0000003d)
fwdbg:CMD SEQ is not Matched (0000003d, 0000003e)
rtw_cfg80211_indicate_disconnect(padapter=988f8000)
pwdev->sme_state=0
fwdbg:CMD SEQ is not Matched (0000003e, 0000003f)
00:03:26.252 timeThread: getting DVB time done : -1 messaging_neutrino_sets_time 1
00:03:26.253 timeThread: Time set FAILED (enabled: ntp 0 dvb 1)
00:03:26.254 timeThread: going to sleep 1 seconds, running 1 scanning 1
00:03:26.274 timeThread: going to sleep for 1 seconds...
00:03:27.282 timeThread: wakeup, running 1 scanning 1 channel 0 reason 110
00:03:27.290 timeThread: getting DVB time (isOpen 1)
fwdbg:issue keepalive null data
fwdbg:issue keepalive null data
------------------------------
stopped at 10.11.2013 16:29:46
Keywelt 1.6
startet at 10.11.2013 17:08:01
------------------------------
[2h[61"p[m[44m[37m[1m[2J[1;1H[(B[)B[?3l[?9hÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º U-Boot 2009.03-svn1773 (Nov 02 2010 - 15:25:47) Coolstream HDx º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º Chipset information º
º Vendor: Conexant Type: CX2450x (Nevis) Revision: D0 Fuses: 7EFE6D24 º
º Option: 00010000 max. clock: 600 MHz Core voltage: high º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º Clock information º
º MPG0: 594.000 MHz MPG1: 594.000 MHz HD : 593.407 MHz AUD : 491.520 MHz º
º PLL0: 432.000 MHz PLL1: 594.000 MHz PLL2: 533.333 MHz º
º CPU : 594.000 MHz from PLL1 º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º Memory configuration º
º Start ³ End ³ Type ³ Description º
ºÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º 00000000 ³ 0FFFFFFF ³ RAM ³ System main memory bank #0 º
º 10000000 ³ 17FFFFFF ³ RAM ³ System main memory bank #1 º
º F0000000 ³ F1FFFFFF ³ FLASH ³ Spansion S29GL256P (256 Mbit / 16M x 16) º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º Serial number: 010-00002615 (0A-000A37) º
º *** Warning - bad CRC, using default environment *** º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º Network configuration º
º MAC: Conexant VMAC rev. 07 address: 00-C5-5C-00-0A-37 º
º PHY: IC Plus IP101 address: 09 º
Error: Bad gzipped data
Error: no valid bmp or bmp.gz image at f0060000
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Hit any key to stop autoboot: 1 0
## Booting kernel from Legacy Image at f0080000 ...
Image Name: Coolstream HDx Kernel
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4136592 Bytes = 3.9 MB
Load Address: 17048000
Entry Point: 17048000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Linux version 2.6.26.8-nevis (image@LAPTOP2) (gcc version 4.3.2 (crosstool-NG-1.3.2) ) #1 Sun Jan 15 19:42:41 CET 2012
CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv7), cr=00c5387f
Machine: CoolStream HDx IRD
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIPT write-back cache
CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536
Kernel command line: console=ttyRI0 mtdparts=cx2450xflash:384k(U-Boot)ro,128k(Splash),4096k(kernel),28160k(systemFS) root=mtd3 rootfstype=jffs2 rw mem=384M
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x30
console [ttyRI0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 384MB = 384MB total
Memory: 383232KB available (3804K code, 349K data, 116K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 192 bytes
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (SUMMARY) © 2001-2006 Red Hat, Inc.
SGI XFS with security attributes, realtime, no debug enabled
msgmni has been set to 748
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
ttyRI0 at MMIO 0xe0412000 (irq = 2) is a CX2450x UART
brd: module loaded
loop: module loaded
Inside emacdev_load function
Inside emacdev_init function
EMAC 0 Initialized
RealTek 8201 PHY eth0: Link down
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
CX2450x MTD driver v1.0 (Jan 15 2012, 19:37:46) © Coolstream International Ltd.
cx2450xflash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
cx2450xflash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
4 cmdlinepart partitions found on MTD device cx2450xflash
Creating 4 MTD partitions on "cx2450xflash":
0x00000000-0x00060000 : "U-Boot"
0x00060000-0x00080000 : "Splash"
0x00080000-0x00480000 : "kernel"
0x00480000-0x02000000 : "systemFS"
cx2450x-ehci cx2450x-ehci.0: Conexant CX2450X EHCI USB-Controller
cx2450x-ehci cx2450x-ehci.0: new USB bus registered, assigned bus number 1
cx2450x-ehci cx2450x-ehci.0: irq 13, io mem 0xe8000100
cx2450x-ehci cx2450x-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Conexant CX2450X EHCI USB-Controller
usb usb1: Manufacturer: Linux 2.6.26.8-nevis ehci_hcd
usb usb1: SerialNumber: cx2450x-ehci.0
cx2450x-ehci cx2450x-ehci.1: Conexant CX2450X EHCI USB-Controller
cx2450x-ehci cx2450x-ehci.1: new USB bus registered, assigned bus number 2
cx2450x-ehci cx2450x-ehci.1: irq 17, io mem 0xe8001100
cx2450x-ehci cx2450x-ehci.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: Conexant CX2450X EHCI USB-Controller
usb usb2: Manufacturer: Linux 2.6.26.8-nevis ehci_hcd
usb usb2: SerialNumber: cx2450x-ehci.1
Initializing USB Mass Storage driver...
usb 2-1: new high speed USB device using cx2450x-ehci and address 2
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: New USB device found, idVendor=0bda, idProduct=8172
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: RTL8191S WLAN Adapter
usb 2-1: Manufacturer: Manufacturer Realtek
usb 2-1: SerialNumber: 00e04c000001
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
Advanced Linux Sound Architecture Driver Version 1.0.16.
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 116K
init started: BusyBox v1.18.4 (coolstream)
running /sbin/mknodes
rootdir=/dev
table=
makedevs: line 16: can't create node console: File exists
done /sbin/mknodes
starting /etc/init.d/S00loadmodules ...
cs_frontpanel: module license 'Proprietary' taints kernel.
Frontpanel driver v0.12.0 (Jan 18 2012, 14:43:13) © Coolstream International Limited
[1;33mFrontpanel: wakeup source 2 time hi 0 lo 0
[0m==DriverVersion: v2.6.6.0.20101111==
8712_usb_endpoint_descriptor(0):
bLength=7
bDescriptorType=5
bEndpointAddress=83
wMaxPacketSize=200
bInterval=0
8712_usb_endpoint_descriptor(1):
bLength=7
bDescriptorType=5
bEndpointAddress=4
wMaxPacketSize=200
bInterval=0
8712_usb_endpoint_descriptor(2):
bLength=7
bDescriptorType=5
bEndpointAddress=6
wMaxPacketSize=200
bInterval=0
8712_usb_endpoint_descriptor(3):
bLength=7
bDescriptorType=5
bEndpointAddress=d
wMaxPacketSize=200
bInterval=0
8712u : USB_SPEED_HIGH
nr_endpoint=4
Boot from EFUSE
Autoload OK!!
CustomerID = 0x 0
MAC Address from efuse= 0-2-72-b5-d1-b6
usbcore: registered new interface driver r871x_usb_drv
rtw driver version=v2.0.1324.20110126
usbcore: registered new interface driver rtw_usb_drv
fuse init (API version 7.9)
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
usbserial: USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
usbserial: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
CX2450x I2C-bus driver version 0.3b (Jan 18 2012, 14:43:15) © Coolstream International Limited
Memory configured as 2 banks
KAL over-allocation map ('x' = kernel, 'C' = cnxt):
------- 0 ------------- to ------------ 256 ---------------
ooooooooooooCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
------- 256 ------------- to ------------ 512 ---------------
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxooxxoooooooooooooooo
................................................................
................................................................
. = no RAM present
C = Conexant KAL
o = unutilized or Kernel RAM
KAL: Starting the KAL...
KAL Bank[0] cached @ V:0x8a000000 == P:0x0a000000, 5120 KB
KAL Bank[0] uncached @ V:0x83700000 == P:0x03700000, 107520 KB
KAL Bank[0] content @ V:0x80c00000 == P:0x00c00000, 44032 KB
KAL Bank[1] cached @ V:0x00000000 == P:0x00000000, 0 KB
KAL Bank[1] uncached @ V:0x91f00000 == P:0x11f00000, 25600 KB
KAL Bank[1] content @ V:0x90000000 == P:0x10000000, 31744 KB
KAL: Tiled physical region 0x00c00000 to 0x03180000 (15)
KAL: Tiled physical region 0x10000000 to 0x11e00000 (15)
KAL: Module loaded
cnxt_base_drv: Initializing Edwards drivers...
cnxt_base_drv: Done initializing Edwards drivers.
cnxt_base_drv: Module loaded with major device 101
FB: cnxtfb_init_inst, plane OSD
FB: mode 1280x720p-50
FB: HD Mode: 1280x720 FrameRate 5
SD Mode: 720x576 FrameRate 2
/proc/cnxt_trace_flags created
# alsa_card_CX2450_init Success 8 , 116
cs_tsx_hsdp_set_port_speed: num: 594 denom: 7
cs_frontend version 0.6b
DVB: registering new adapter (cs_frontend_dvb)
stv090x_attach: Trying to attach STV090x demodulator(1)
DVB: Unable to find symbol cx24116_attach()
avl2108_attach: Attaching AVL2108 demodulator(0)
DVB: registering adapter 0 frontend 0 (AVL2108 Demodulator)...
scsi0 : cnxt_sata
ata1: SATA max UDMA/133 irq 42
ata1: SATA link down (SStatus 0 SControl 300)
scsi1 : cnxt_sata
ata2: SATA max UDMA/133 irq 35
ata2: SATA link down (SStatus 0 SControl 300)
starting /etc/init.d/S01mount ...
starting /etc/init.d/S50hostname ...
starting /etc/init.d/S51networking ...
Configuring network interfaces... Starting wlan0
Failed to connect to wpa_supplicant - wpa_ctrl_open: Success
1 RCR=0x153f00e
2 RCR=0x553f00e
MAC Address= 0-2-72-b5-d1-b6
fwdbg:RTL8712 FW version 0.0.1# 三 8月 11 20:37:05 CST 2010 SVN
fwdbg:Chip Version:00000002
fwdbg:HCI type: 00000012(00000004)
fwdbg:rf_cofig: 00000012(000000fe, 00000000, 00000000)
fwdbg:mp_mode: 00000000(00000001), IQK: 400000fc
fwdbg:vcs type: 00000002(00000001)
fwdbg:32k calibra: 733, 32K TSF: 0000002c
fwdbg:target thermal: 00000017, bt_coexist: 00000000
fwdbg:->(00000001, 00000001, 00000001, 00000000)
r871x_wx_set_pmkid: IW_PMKSA_FLUSH!
set_mode = IW_MODE_INFRA
fwdbg:set opmode: 00000000
Linux wireless extensions version 22 detected.
ipw2x00 driver uses driver_wext (-Dwext) instead of driver_ipw.
fwdbg:get survey cmd
fwdbg:survey done(00000002, 00000000)
wpa_ie(length:22):
0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00
fwdbg:setAuth: 00000002
fwdbg:get join cmd
fwdbg:cur channel: 00000001, bcn interval: 00000064
fwdbg:link to Atheros AP
fwdbg:issue auth
fwdbg:issue assocreq(00000047)
fwdbg:mac id #5: 0000005b, 100fffff, 00000007
fwdbg:join res(00000001, 000001b7)
fwdbg:rcv set_stakey
Sat Jan 1 00:00:00 CET 2000
done.
starting /etc/init.d/S52syslogd ...
starting /etc/init.d/S53nfsd ...
Jan 1 00:00:00 coolstream syslog.info syslogd started: BusyBox v1.18.4
starting /etc/init.d/S54inetd ...
starting /etc/init.d/S60autofs ...
starting the automounter...
starting /etc/init.d/S60rsyncd ...
Jan 1 00:00:00 coolstream daemon.info rsyncd[500]: rsyncd version 3.0.7 starting, listening on port 873
Jan 1 00:00:00 coolstream daemon.err automount[494]: failed to load map, exiting
starting /etc/init.d/S95rescan-failed-drives ...
starting /etc/init.d/S9L_logomask ...
starting /etc/init.d/S9T_tuxcald ...
starting /etc/init.d/S9T_tuxmaild ...
[got_addbareq_event_callback] mac = 0 24 FE 5 F1 E5, seq = 32, tid = 0
fwdbg:issue action: 00000003, 00000001, 00000000
fwdbg:issue action: 00000003, 00000000, 00000000
fwdbg:ADDBA RSP: 00000001
Please press Enter to activate this console. /var/plugins/operations camd_init
/var/plugins/operations cardserver_start
/var/plugins/operations camd_start
/var/plugins/operations rezap
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
10 Nov 17:08:46 ntpdate[479]: step time server 130.133.1.10 offset 437418523.377719 sec
avl2108_load_firmware: Waiting for firmware upload (dvb-fe-avl2108.fw)...
firmware: requesting dvb-fe-avl2108.fw
avl2108_load_firmware: Waiting for firmware upload(2)...
avl2108_load_firmware: Firmware upload complete
/var/tuxbox/config/zapit/myservices.xml: No such file or directory
sh: /var/tuxbox/config/deepstandby.off: not found
/var/tuxbox/config/deepstandby.off: No such file or directory
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
[ConfigFile] Unable to open file /var/tuxbox/config/moviebrowser.conf for reading.
m_cBoxFrame.iHeight 665 m_cBoxFrameBrowserList.iHeight 332 m_settings.browserFrameHeight 50
17:08:58.071 [timeThread] - 10.11.2013 17:08:58, tim: Sun Nov 10 17:08:57 2013
17:08:58.081 [timeThread] Time set via DVB(TDT), going to sleep for 5 seconds.
showChannelLogo: logo_available: 1 file: /share/tuxbox/neutrino/icons/logo/Das Erste HD.png
after showchannellogo, mode = 3 ret = 3 logo_ok = 1
showChannelLogo: logo_available: 1 file: /share/tuxbox/neutrino/icons/logo/Das Erste HD.png
after showchannellogo, mode = 3 ret = 3 logo_ok = 1
17:09:02.259 eit_set_update_filter, servicekey = 0x3f300012b5c, current version 0xff got events 0
rescanning /sys/class/scsi_host/host0
logomask Version 1.04
ata1: hard resetting link
ata1: SATA link down (SStatus 0 SControl 300)
ata1: EH complete
rescanning /sys/class/scsi_host/host1
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 300)
ata2: EH complete
17:09:06.045 getUTC(TOT): len=13 cc=DEU reg_id=0 pol=0 offs=0100 new=0200 when=Sun Mar 30 01:00:00 2014
17:09:06.067 [timeThread] - 10.11.2013 17:09:06, tim: Sun Nov 10 17:09:05 2013
17:09:06.070 [timeThread] Time set via DVB(TOT), going to sleep for 1800 seconds.
------------------------------
stopped at 10.11.2013 17:09:11
WLAN-Problem KW-Image 2.01 DWA-131
in Das Keywelt-Image
Geschrieben
Da bekomm ich als Ausgabe dann