blomber Geschrieben 10. April 2007 Melden Share Geschrieben 10. April 2007 wenns im falschen bereich ist, bitte verschieben. hab, nachdem mein letztes PW-abo abgelaufen ist jetzt die letzte version des KW-image auf meine sagem gezogen und noch die kleine datei vom ...berg. läuft auch alles soweit ganz ordentlich. nur sind mir jetzt zwei probleme aufgefallen: 1. die hdd geht nachdem die box in den standbay gegangen ist nicht aus. im betrieb der box geht sie nach einer gewissen zeit in den standby. 2. habe gestern abend mission impossible III geschaut und habe gesehen, daß mindestens drei mal das bild für den bruchteil einer sekunde eingefroren war (weiss nicht, ob öfter, da ich auch ein paar mal den raum verlassen hatte) ich kann jetzt nicht mit gewissheit sagen, ob das auch bei anderen sendern passiert, da ich es jetzt erst draufgezogen habe. hat vielleicht jemand die gleichen erfahrungen gemacht. und hat vielleicht schon jemand ne lösung. vielleicht lag das bei pre....-dire.. ja auch am sender selbst. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
blomber Geschrieben 11. April 2007 Autor Melden Share Geschrieben 11. April 2007 keiner ne idee ? Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
blomber Geschrieben 17. April 2007 Autor Melden Share Geschrieben 17. April 2007 also das mit der festplatte hab ich jetzt hingekriegt. aber gestern abend nach 20:15 auf pre*3 ist das bild wieder einige male eingefroren. einmal hat es annähernd ne sekunde gedauert. keiner ne idee? Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
ArnoNym Geschrieben 18. April 2007 Melden Share Geschrieben 18. April 2007 Ich habe auch lange rumprobiert um die Freezer wegzukriegen, jetzt wo der enx-Watchdog ausgeschaltet ist geht es offenbar. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
blomber Geschrieben 18. April 2007 Autor Melden Share Geschrieben 18. April 2007 das könnte ich natürlich nochmal ausprobieren. danke für den hinweis. seit gestern habe ich aber wieder das problem, daß die platte mit dem standby nicht abschaltet. habe eine aufnahme von PW gemacht und diese wurde auch beendet. nur leider hat sich die platte nicht abgeschaltet, nachdem ich die box in den standby geschickt habe - lief heute morgen noch. ich mach nachher vielleicht mal nen bootlog. aber ich muss schon sagen, so langsam fängt das an zu nerven. überleg mir schon, auf JTG zurück zugehen. nur leider bietet riker ja keinen support für die ca**3 an. müsste man also selbst frickeln. aber wenigstens lief das die platte richtig und wurde auch ausgeschaltet. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
blomber Geschrieben 20. April 2007 Autor Melden Share Geschrieben 20. April 2007 so. hab ein paar mal hin und her-probiert. - gebootet, ts-file abgespielt, gewartet, platte ging aus, box ausgeschaltet -> in dem moment wo'S LCD dunkel wurde, sprang die platte wieder an. - gebootet, ts-file abgespielt, während die platte lief die box ausgeschaltet -> in dem moment wo das LCD dunkel wurde, ging auch die plate aus. - a.s.o. => wenn die platte nach gewisser wartezeit aus war und ich dann die box ausgeschaltet habe, sprang die platte in dem moment, wo das lcd dunkel wurde wieder an. lief die platte noch, so ging sie in dem moment aus. mit dem jtg-image: hier war anfangs das gleiche erlebnis. ich habe dann mal probiert, ob die files auf der platte abgespielt werden können (mp3 und TS) und die startverzeichnisse für die player ausgewählt - das lief soweit -> platte also ok. nachdem ich dann noch in den einstellungen "IDE Treiber/Mount laden" auf "ein" gesetzt hatte und das ganze nochmal probiert hatte, lief wieder alles. soll heissen: - lief die platte noch, die box wurde ausgeschaltet, so ging die platte aus, wenn das lcd dunkel wurde. - lief die platte nicht mehr und die box wurde ausgeschaltet, so sprang die platte noch einmal an, nachdem das fernsehbild aus war und wurde wieder in dem moment abgeschaltet, in dem das lcd dunkel wurde. hat einer ne lösung für das problem? ich würd gern das kw-image behalten, da ich echt keinen bock habe, ins JTG-image was reinzufrickeln. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
rich Geschrieben 20. April 2007 Melden Share Geschrieben 20. April 2007 Kannst Du einmal in die Datei '/var/etc/init.d/halt' bei der Zeile 92 eine zusätzliche Pause einbauen. xfs) echo "Unmounting 'xfs' on '$fs'" umount -f $fs sleep 3 ;; esac done sleep 5 reverse while read des fs type rest; do case "$type" in jffs2) echo "Unmounting 'jffs2' on '$fs'" Ist bei Dir der HDD Schreib-Cache aktiv? Weiterhin kannst Du auch einmal versuchen die Datei 'hdparm' aus dem Archiv 'fuer_hdparm_-M128b' auf die Box zu kopieren, die Rechte auf 755 setzen und die Box neu starten. Eventuell hat dies auch einen Einfluss auf dieses Problem. rich Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
blomber Geschrieben 20. April 2007 Autor Melden Share Geschrieben 20. April 2007 hallo rich, nein schreibcache ist nicht aktiv. die anderen sachen heb ich mir noch auf, weil .... ich hab's nochmal draufgespielt, denn du wolltest ja mal die bootlogs haben. leider hat das mit den bootlogs nicht ganz geklappt, ich habe es jedoch erst bemerkt, als ich schon das kw gelöscht und jtg drauf hatte. beim jtg wie erwartet und vorhin schon beschrieben. beim kw lief es auch erst problemlos. dann habe ich die einstellungen ein wenig geändert und an das jtg-image angepasst, so wie es ursprünglich lief und siehe da, die platte schaltete sich beim runterfahren nicht ab - leider habe ich zu der zeit kein bootlog mitgeschrieben. beim nächsten mal, oder sollte ich sagen ab dem nächsten mal wurde die platte wieder ruhiggestellt. ich hab dir dennoch die bootlogs einmal eingestellt. vielleicht kannst du ja schon was mit anfangen. JTG:------------------------------------------------- debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS debug: BMon V1.2 mID 03 debug: feID 00 enxID 03 debug: fpID 52 dsID 01-3f.1c.ba.07.00.00-59 debug: HWrev 21 FPrev 0.23 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS debug: Got Block #0040 will verify ELF image, start= 0x800000, size= 158020 verify sig: 262 Branching to 0x40000 U-Boot 1.1.4 (Tuxbox) (Aug 7 2006 - 21:15:08) CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Sagem, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: . done. FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 759068 bytes loaded to 0x100000 ............................................................... Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 759004 Bytes = 741.2 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.32-dbox2 (vom Jtg-Team) (gcc version 3.4.4) #1 Mo Aug 7 21:17 :06 CEST 2006 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs Decrementer Frequency = 247500000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x2000) Console: colour dummy device 80x25 Calibrating delay loop... 65.74 BogoMIPS Memory: 30644k available (1296k kernel code, 368k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc. squashfs: version 3.0 (2006/03/15) Phillip Lougher i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:32:27:2b loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "FLFS (U-Boot)" 0x00040000-0x006a0000 : "root (SquashFS)" 0x006a0000-0x00800000 : "var (JFFS2)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init Starting pid 10, console /dev/console: '/etc/init.d/rcS'lti-call Starting the automounter Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide: late registration of driver. dboxide: activating cs2 dboxide: address space of DBox2 IDE CPLD is at: c38bb000 Probing IDE interface ide0... hda: SAMSUNG SP1654N, ATA DISK drive ide0 at 0x010-0x017,0x04e on irq 47 hda: attached ide-disk driver. hda: host protected area => 1 Thu Jan 1 12:00:00 CET 1970 event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $ [i2c-8xx]: mpc 8xx i2c init [i2c-8xx]: adapter: 0 $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $ $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $ DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600). dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $ avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $ avia_av: AVIA500 sptsfix is off avia_av_core: Starting avia_av_wdt thread. avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $ avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $ hda: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63 Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 kjournald starting. Commit interval 5 seconds EXT3-fs warning: mounting unchecked fs, running e2fsck is recommended EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. /dev/ide/host0/bus0/target0/lun0avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12 /20 01:01:22 carjay Exp $ avia_gt_core: autodetecting chip type... eNX avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $ avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $ avia_gt_ucode: loaded ucode v0014 avia_gt_ucode: ucode section filters disabled. avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning... avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $ avia_gt_pcm_set_rate(44100) avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $ avia_gt_core: Loaded AViA eNX/GTX driver /disc: avia_av_core: Starting avia_gt_wdt thread. avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device setting standby to 60 (5 minutes) lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface jtginfo $Id: jtginfo.c,v 1.7 2006/08/01 22:04:55 jtgriker Exp $ avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $ avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $ avia_gt_pcm_set_rate(44100) avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $ ves1x93: Detected ves1993 DVB: registering frontend 0:0 (VES1993)... avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $ avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $ $Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $ [sectionsd] Caching max 6000 events [sectionsd] Caching 14 days [sectionsd] Events are old 60min after their end time $Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 houdini Exp $ /tmp/currentservices.xml: No such file or directory [camd] ca system id: 1702 $Id: controld.cpp,v 1.124 2006/06/27 10:21:59 barf Exp $ [controld] Boxtype detected: (3, Sagem D-BOX2) [controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1 [nhttpd] Neutrino HTTP-Server starting.. [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular) [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular) [LCDFONT] Intializing font cache... [basicsocket] send_data: Resource temporarily unavailable /bin/neutrino: /lib/libpng12.so.0: no version information available (required by /bin/neutrino) [basicsocket] send_data: Resource temporarily unavailable [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [deutsch.locale] missing entry: moviebrowser.edit_book_name_info2 [deutsch.locale] missing entry: moviebrowser.edit_book_pos_info2 [deutsch.locale] has 2 missing entrys [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... [LCDFONT] FTC_Face_Requester (Fix15/Bold) [LCDFONT] FTC_Face_Requester (Fix14/Bold) /dev/input/event1: No such file or directory [neutrino] menue setup loading locales: scandir: No such file or directory [neutrino] received 17 sats [neutrino] registering as event client [basicsocket] send_data: Resource temporarily unavailable [neutrino] initialized everything zap failed! [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out zapit shot down Going to halt system now ... Starting pid 149, console /dev/console: '/etc/init.d/halt' CXA2126 found CXA2126 found Unmounting 'ramfs' on '/tmp' umount: Couldn't umount /tmp: No such file or directory Unmounting 'jffs2' on '/var' umount: forced umount of /var failed! Oops: umount failed :-( -- trying to remount readonly... Unmounting 'ext3' on '/hdd' hda: status timeout: status=0xd0 { Busy } hda: no DRQ after issuing WRITE ide0: reset: success Ready to shutdown system... The system is going down NOW !![nhttpd] stop requested...... Sending SIGKILL to all processes. The system is halted. flushing ide devices: hda KW:-------------------------------------------------------------------------- LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 696900 bytes loaded to 0x100000 ............................................................... Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 696836 Bytes = 680.5 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.32-dbox2 (image@tower) (gcc version 3.4.4) #1 Do Aug 31 20:09: 34 CEST 2006 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs Decrementer Frequency = 247500000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x2000) Console: colour dummy device 80x25 Calibrating delay loop... 65.74 BogoMIPS Memory: 30776k available (1184k kernel code, 348k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc. Squashfs 2.2-r2 (released 2005/09/08) © 2002-2005 Phillip Lougher i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:32:27:2b loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00540000 : "root (squashfs)" 0x00540000-0x007e0000 : "var (jffs2)" 0x007e0000-0x00800000 : "FLFS (U-Boot)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init init started: BusyBox v1.2.1 (2007.03.17-18:13+0000) multi-call event: $Id: eve nt.c,v 1.12 2003/09/30 05:45:38 obi Exp $ Detected STB: Vendor: Sagem Model: D-BOX2 [i2c-8xx]: mpc 8xx i2c init [i2c-8xx]: adapter: 0 $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $ $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $ DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600). dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $ avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $ avia_av_core: Starting avia_av_wdt thread. avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $ avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $ avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $ avia_gt_core: autodetecting chip type... eNX avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $ avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $ avia_gt_ucode: loaded ucode v0014 avia_gt_ucode: ucode section filters disabled. avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning... avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $ avia_gt_pcm_set_rate(44100) avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $ avia_gt_core: Loaded AViA eNX/GTX driver avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device avia_av_core: Starting avia_gt_wdt thread. lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $ avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $ avia_gt_pcm_set_rate(44100) avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $ DVB: registering frontend 0:0 (VES1993)... avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $ avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $ avia_gt_proc: $Id: avia_gt_proc.c, v 0.1.3 2005/12/11 22:30:00 Skars & Merandos Exp $ avia_gt_proc: Description: GTX/ENX proc_dev Driver with proc_fs extension options: (demux reinit) enx_reset=1 (framer chan.) fc_reset=1 (clr avia reg) avia=0 (enx td trace) trace=1 (lock, unlock) spinlock=0 Schreiben ueber /proc/bus/gtx (delay) delay=500 Thu Jan 1 01:00:00 CET 1970 Please press Enter to activate this console. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx dboxide: $Id: main.c,v 1.9 2006/09/11 17:30:00 carjay Exp $ ide: late registration of driver. dboxide: activating cs2 dboxide: address space of DBox2 IDE CPLD is at: 0xc3bef000 Probing IDE interface ide0... hda: SAMSUNG SP1654N, ATA DISK drive ide0 at 0x010-0x017,0x04e on irq 47 hda: attached ide-disk driver. hda: host protected area => 1 $Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $ [sectionsd] Caching max 3000 events [sectionsd] Caching 14 days [sectionsd] Events are old 60min after their end time /var/plugins/operations logcs_init /var/plugins/operations camd_init $Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 Kroki & Worschter Exp $ [zapit] MAX_SOCKETS=3 /var/plugins/operations cardserver_start hda: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63 Partition check: /dev/ide/host0/bus0/target0/lun0:/var/plugins/operations camd_star p1 p2 t EXT2-fs warning (device ide0(3,2)): ext2_read_super: mounting ext3 filesystem as ext2 EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended /dev/ide/host0/bus0/target0/lun0/disc: setting drive write-caching to 0 (off) setting standby to 60 5 minutes + 0 seconds) DBox2 Multicam Driver v1.01 skars & doz21 starte camd3 /var/plugins/operations check_camd3_socket 01.01.1970 01:00:17 camd3: BOXTYPE: 1 01.01.1970 01:00:17 camd3: LOG: 6 01.01.1970 01:00:17 camd3: UDP_PORT: 20248 01.01.1970 01:00:17 camd3: original slot au on 01.01.1970 01:00:17 camd3: HTTP_PORT: 9080 01.01.1970 01:00:17 camd3: LOG_HOST: 127.0.0.1:514 01.01.1970 01:00:17 camd3: DNS_CACHE: 600 sec 01.01.1970 01:00:17 camd3: SOCKET: /tmp/camd.sock01 01.01.1970 01:00:17 camd3: KEYS: /var/keys/camd3.keys 01.01.1970 01:00:17 camd3: SERVERS: /var/keys/camd3.servers 01.01.1970 01:00:17 camd3: USERS: /var/keys/camd3.users 01.01.1970 01:00:17 camd3: Slot /dev/tts/1: (carddetect=password1) initialisiere ... 01.01.1970 01:00:18 camd3: Slot /dev/tts/1: starte Monitor... 01.01.1970 01:00:18 camd3: Slot /dev/tts/1: bereit 01.01.1970 01:00:19 camd3: original slot: CAID=1702 01.01.1970 01:00:19 camd3: error parse line #143 in /var/keys/camd3.keys 01.01.1970 01:00:19 camd3: error parse line #147 in /var/keys/camd3.keys 01.01.1970 01:00:19 camd3: KeyDB: gestartet 01.01.1970 01:00:19 camd3: camd v3.868 - erfolgreich gestartet 01.01.1970 01:00:20 camd3: HTTP: started on port 9080 [getservices] /var/tuxbox/config/zapit/myservices.xml found. /tmp/currentservices.xml: No such file or directory $Id: controld.cpp,v 1.124 2006/06/27 10:21:59 barf Exp $ [controld] Boxtype detected: (3, Sagem D-BOX2) [controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1 [controld] setting VideoFormat to auto [yhttpd] Webserver nhttpd/3.1.2 (yhttpd_core/1.2.0) [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular) [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular) [LCDFONT] Intializing font cache... [sectionsd] getUTC: read: Connection timed out [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [yhttpd] Webserver starting... /var/plugins/operations epg_reinit neutrino: /lib/libpng12.so.0: no version information available (required by neut rino) [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... [LCDFONT] FTC_Face_Requester (Fix15/Bold) [LCDFONT] FTC_Face_Requester (Fix14/Bold) /dev/input/event1: No such file or directory [neutrino] menue setup [controld] setting VideoFormat to auto [neutrino] received 33 sats [neutrino] registering as event client [controld] setting VideoFormat to auto [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [neutrino] initialized everything zap failed! [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out error while loading icon: /share/tuxbox/neutrino/icons/shutdown.raw error while loading palette: /share/tuxbox/neutrino/icons/shutdown.pal zapit shot down /var/plugins/operations camd_exit /var/plugins/operations camd_stop /var/plugins/operations cardserver_stop [sectionsd] getUTC: read: Connection timed out beende camd3 01.01.1970 01:05:59 camd3: fahre runter... 01.01.1970 01:05:59 camd3: HTTP: stopped 01.01.1970 01:05:59 camd3: UDP: fahre runter... 01.01.1970 01:05:59 camd3: Slot /dev/tts/1: schliesse... 01.01.1970 01:05:59 camd3: Slot /dev/tts/1: warte auf Monitor... CXA2126 found 01.01.1970 01:06:00 camd3: Slot /dev/tts/1: geschlossen CXA2126 found 01.01.1970 01:06:00 camd3: KeyDB: beendet 01.01.1970 01:06:00 camd3: camd v3.868 - erfolgreich beendet Unmounting 'ext2' on '/hdd' hda: status timeout: status=0xd0 { Busy } hda: no DRQ after issuing WRITE ide0: reset: success Unmounting 'ramfs' on '/tmp' umount: Couldn't umount /tmp: No such file or directory Unmounting 'jffs2' on '/var' umount: forced umount of /var failed! Oops: umount failed :-( -- trying to remount readonly... Ready to shutdown system... The system is going down NOW !![yhttpd] !!! SIGNAL !!! :15! [yhttpd] No special SIGNAL-Handler:15! [yhttpd] stop requested...... Sending SIGKILL to all processes. Requesting system halt. flushing ide devices: hda ########################################## ich werd mich morgen abend nochmal an die kiste begeben und jedes mal ein bootlog mitschreiben. vielleicht kann ich ja nen fehler provozieren. evtl. organisier ich mir noch nen laptop, dann kann ich das mal direkt nach einer aufnahme testen und brauch die kiste nicht vom wohnzimmer ins büro schleppen. gruß blomber Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
rich Geschrieben 21. April 2007 Melden Share Geschrieben 21. April 2007 Was mir bei Dir im Log auffällt ist das folgende: hda: status timeout: status=0xd0 { Busy }hda: no DRQ after issuing WRITE ide0: reset: success Hast du die Möglichkeit zu kontrollieren ob beim Anlaufen der Platte die Spannung (5V und 12V) vom Netzteil der HDD stabil bleibt? rich Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
DrStoned Geschrieben 21. April 2007 Melden Share Geschrieben 21. April 2007 Ich würde mal folgendes probieren: Füge mal in die start_neutrino folgende rot markierte Zeilen ein: KEEP_ALIVE=1while expr $KEEP_ALIVE != 0 > /dev/null do neutrino -u -f KEEP_ALIVE=$? done # Festplatte aufwecken ls /hdd > /dev/null pzapit -kill Damit wird die Platte beim Beenden von Neutrino geweckt und sollte zum Zeitpunkt des umountens der Platte bereit sein, diesen Befehl auch richtig zu empfangen. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
blomber Geschrieben 21. April 2007 Autor Melden Share Geschrieben 21. April 2007 probier ich beides mal heute abend aus. wobei die spannung sollte eigentlich stabil sein, ist nen mistneues netzteil. thx fürs erste Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
blomber Geschrieben 24. April 2007 Autor Melden Share Geschrieben 24. April 2007 so, hab mal den von Dt.stoned ausprobiert. hat zu dem ergebnis geführt, das bei einer seagate 40GB platte, auf der ich mal aufnahmen mit dem JTG-image gemacht hatte, die aber nun leer war, 1. wenn die platte vorab aufgrund langer wartezeit im ruhezustand war, diese gar nicht mehr hochfuhr, sondern aus blieb 2. wenn sie noch lief, sie mit dem ausschalten der box in den ruhezustand ging. bei der samsung, die vorher an der box mit JTG image normal lief und mit der ich den HDD-check unter kw-image gemacht habe. 1. wenn die platte vorab aufgrund langer wartezeit im ruhezustand war, diese hochfuhr und mit dem ausschalten der box in den ruhezustand ging 2. wenn sie noch lief, sie mit dem ausschalten der box in den ruhezustand ging. heb ich ein paar mal getetstet. weitere test im "normalbetrieb" folgen. jedoch mangels laptop ohne bootlog. werde dann im bedarfall nochmal mit der box ins büro an den rechner umziehen, dann jedoch wieder ohne sat-anschluss. hier nun die bootlogs: seagate fall 1: U-Boot 1.1.4 (Tuxbox) (Apr 10 2006 - 22:44:42) CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Sagem, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: .... done. FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 696900 bytes loaded to 0x100000 ............................................................... Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 696836 Bytes = 680.5 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.32-dbox2 (image@tower) (gcc version 3.4.4) #1 Do Aug 31 20:09: 34 CEST 2006 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs Decrementer Frequency = 247500000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x2000) Console: colour dummy device 80x25 Calibrating delay loop... 65.74 BogoMIPS Memory: 30776k available (1184k kernel code, 348k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc. Squashfs 2.2-r2 (released 2005/09/08) © 2002-2005 Phillip Lougher i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:32:27:2b loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00540000 : "root (squashfs)" 0x00540000-0x007e0000 : "var (jffs2)" 0x007e0000-0x00800000 : "FLFS (U-Boot)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init init started: BusyBox v1.2.1 (2007.03.17-18:13+0000) multi-call event: $Id: eve nt.c,v 1.12 2003/09/30 05:45:38 obi Exp $ Detected STB: Vendor: Sagem Model: D-BOX2 [i2c-8xx]: mpc 8xx i2c init [i2c-8xx]: adapter: 0 $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $ $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $ DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600). dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $ avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $ avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $ avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $ avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $ avia_gt_core: autodetecting chip type... eNX avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $ avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $ avia_gt_ucode: loaded ucode v0014 avia_gt_ucode: ucode section filters disabled. avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning... avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $ avia_gt_pcm_set_rate(44100) avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $ avia_gt_core: Loaded AViA eNX/GTX driver avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $ avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $ avia_gt_pcm_set_rate(44100) avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $ DVB: registering frontend 0:0 (VES1993)... avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $ avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $ avia_gt_proc: $Id: avia_gt_proc.c, v 0.1.3 2005/12/11 22:30:00 Skars & Merandos Exp $ avia_gt_proc: Description: GTX/ENX proc_dev Driver with proc_fs extension options: (demux reinit) enx_reset=1 (framer chan.) fc_reset=1 (clr avia reg) avia=0 (enx td trace) trace=1 (lock, unlock) spinlock=0 Schreiben ueber /proc/bus/gtx (delay) delay=500 Thu Jan 1 01:00:00 CET 1970 Please press Enter to activate this console. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx dboxide: $Id: main.c,v 1.9 2006/09/11 17:30:00 carjay Exp $ ide: late registration of driver. dboxide: activating cs2 dboxide: address space of DBox2 IDE CPLD is at: 0xc3bef000 Probing IDE interface ide0... hda: ST340823A, ATA DISK drive ide0 at 0x010-0x017,0x04e on irq 47 $Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $ hda: attached ide-disk driver. hda: 78165360 sectors (40021 MB) w/1024KiB Cache, CHS=77545/16/63 Partition check: /dev/ide/host0/bus0/target0/lun0:[sectionsd] Caching max 3000 events [PTBL] [4865/255/63] p1 [sectionsd] Caching 14 days [sectionsd] Events are old 60min after their end time /var/plugins/operations logcs_init /var/plugins/operations camd_init mount: Mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such f ile or directory /dev/ide/host0/bus0/target0/lun0/disc: setting drive write-caching to 0 (off) /var/plugins/operations cardserver_start setting standby to 60 5 minutes + 0 seconds) $Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 Kroki & Worschter Exp $ [zapit] MAX_SOCKETS=3 [zapit] PMT update enabled /var/plugins/operations camd_start DBox2 Multicam Driver v1.01 skars & doz21 starte camd3 /var/plugins/operations check_camd3_socket 01.01.1970 01:00:21 camd3: BOXTYPE: 1 01.01.1970 01:00:21 camd3: LOG: 6 01.01.1970 01:00:21 camd3: UDP_PORT: 20248 01.01.1970 01:00:21 camd3: original slot au on 01.01.1970 01:00:21 camd3: HTTP_PORT: 9080 01.01.1970 01:00:21 camd3: LOG_HOST: 127.0.0.1:514 01.01.1970 01:00:21 camd3: DNS_CACHE: 600 sec 01.01.1970 01:00:21 camd3: SOCKET: /tmp/camd.sock01 01.01.1970 01:00:21 camd3: KEYS: /var/keys/camd3.keys 01.01.1970 01:00:21 camd3: SERVERS: /var/keys/camd3.servers 01.01.1970 01:00:21 camd3: USERS: /var/keys/camd3.users 01.01.1970 01:00:21 camd3: Slot /dev/tts/1: (carddetect=password1) initialisiere ... 01.01.1970 01:00:22 camd3: Slot /dev/tts/1: starte Monitor... 01.01.1970 01:00:23 camd3: Slot /dev/tts/1: bereit 01.01.1970 01:00:23 camd3: original slot: CAID=1702 01.01.1970 01:00:23 camd3: KeyDB: gestartet 01.01.1970 01:00:24 camd3: camd v3.868 - erfolgreich gestartet 01.01.1970 01:00:24 camd3: HTTP: started on port 9080 [getservices] /var/tuxbox/config/zapit/myservices.xml found. /tmp/currentservices.xml: No such file or directory $Id: controld.cpp,v 1.124 2006/06/27 10:21:59 barf Exp $ [controld] Boxtype detected: (3, Sagem D-BOX2) [controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1 [yhttpd] Webserver nhttpd/3.1.2 (yhttpd_core/1.2.0) [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular) [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular) [LCDFONT] Intializing font cache... [sectionsd] getUTC: read: Connection timed out [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [yhttpd] Webserver starting... /var/plugins/operations epg_reinit neutrino: /lib/libpng12.so.0: no version information available (required by neut rino) [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... [LCDFONT] FTC_Face_Requester (Fix15/Bold) [LCDFONT] FTC_Face_Requester (Fix14/Bold) /dev/input/event1: No such file or directory [neutrino] menue setup [neutrino] received 33 sats [neutrino] registering as event client [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [neutrino] initialized everything zap failed! [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out error while loading icon: /share/tuxbox/neutrino/icons/shutdown.raw error while loading palette: /share/tuxbox/neutrino/icons/shutdown.pal zapit shot down /var/plugins/operations camd_exit /var/plugins/operations camd_stop /var/plugins/operations cardserver_stop beende camd3 01.01.1970 01:07:13 camd3: fahre runter... 01.01.1970 01:07:13 camd3: HTTP: stopped 01.01.1970 01:07:13 camd3: UDP: fahre runter... 01.01.1970 01:07:13 camd3: Slot /dev/tts/1: schliesse... 01.01.1970 01:07:13 camd3: Slot /dev/tts/1: warte auf Monitor... CXA2126 found CXA2126 found 01.01.1970 01:07:13 camd3: Slot /dev/tts/1: geschlossen 01.01.1970 01:07:13 camd3: KeyDB: beendet 01.01.1970 01:07:14 camd3: camd v3.868 - erfolgreich beendet Unmounting 'ramfs' on '/tmp' umount: Couldn't umount /tmp: No such file or directory Unmounting 'jffs2' on '/var' umount: forced umount of /var failed! Oops: umount failed :-( -- trying to remount readonly... Ready to shutdown system... The system is going down NOW !![yhttpd] !!! SIGNAL !!! :15! [yhttpd] No special SIGNAL-Handler:15! [yhttpd] stop requested...... Sending SIGKILL to all processes. Requesting system halt. flushing ide devices: hda ##################################################### seagate fall 2: ----------------- boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS debug: Got Block #0040 will verify ELF image, start= 0x800000, size= 154948 verify sig: 262 Branching to 0x40000 U-Boot 1.1.4 (Tuxbox) (Apr 10 2006 - 22:44:42) CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Sagem, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: .... done. FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 696900 bytes loaded to 0x100000 ............................................................... Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 696836 Bytes = 680.5 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.32-dbox2 (image@tower) (gcc version 3.4.4) #1 Do Aug 31 20:09: 34 CEST 2006 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs Decrementer Frequency = 247500000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x2000) Console: colour dummy device 80x25 Calibrating delay loop... 65.74 BogoMIPS Memory: 30776k available (1184k kernel code, 348k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc. Squashfs 2.2-r2 (released 2005/09/08) © 2002-2005 Phillip Lougher i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:32:27:2b loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00540000 : "root (squashfs)" 0x00540000-0x007e0000 : "var (jffs2)" 0x007e0000-0x00800000 : "FLFS (U-Boot)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init init started: BusyBox v1.2.1 (2007.03.17-18:13+0000) multi-call event: $Id: eve nt.c,v 1.12 2003/09/30 05:45:38 obi Exp $ Detected STB: Vendor: Sagem Model: D-BOX2 [i2c-8xx]: mpc 8xx i2c init [i2c-8xx]: adapter: 0 $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $ $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $ DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600). dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $ avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $ avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $ avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $ avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $ avia_gt_core: autodetecting chip type... eNX avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $ avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $ avia_gt_ucode: loaded ucode v0014 avia_gt_ucode: ucode section filters disabled. avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning... avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $ avia_gt_pcm_set_rate(44100) avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $ avia_gt_core: Loaded AViA eNX/GTX driver avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $ avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $ avia_gt_pcm_set_rate(44100) avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $ DVB: registering frontend 0:0 (VES1993)... avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $ avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $ avia_gt_proc: $Id: avia_gt_proc.c, v 0.1.3 2005/12/11 22:30:00 Skars & Merandos Exp $ avia_gt_proc: Description: GTX/ENX proc_dev Driver with proc_fs extension options: (demux reinit) enx_reset=1 (framer chan.) fc_reset=1 (clr avia reg) avia=0 (enx td trace) trace=1 (lock, unlock) spinlock=0 Schreiben ueber /proc/bus/gtx (delay) delay=500 Thu Jan 1 01:00:00 CET 1970 Please press Enter to activate this console. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx dboxide: $Id: main.c,v 1.9 2006/09/11 17:30:00 carjay Exp $ ide: late registration of driver. dboxide: activating cs2 dboxide: address space of DBox2 IDE CPLD is at: 0xc3bef000 Probing IDE interface ide0... hda: ST340823A, ATA DISK drive ide0 at 0x010-0x017,0x04e on irq 47 $Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $ hda: attached ide-disk driver. hda: 78165360 sectors (40021 MB) w/1024KiB Cache, CHS=77545/16/63 Partition check: /dev/ide/host0/bus0/target0/lun0: [PTBL] [4865/255/63] p1 [sectionsd] Caching max 3000 events [sectionsd] Caching 14 days [sectionsd] Events are old 60min after their end time /var/plugins/operations logcs_init /var/plugins/operations camd_init mount: Mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such f ile or directory /dev/ide/host0/bus0/target0/lun0/disc: setting drive write-caching to 0 (off) setting standby to 60 5 minutes + 0 seconds) $Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 Kroki & Worschter Exp $ [zapit] MAX_SOCKETS=3 [zapit] PMT update enabled /var/plugins/operations cardserver_start /var/plugins/operations camd_start DBox2 Multicam Driver v1.01 skars & doz21 starte camd3 /var/plugins/operations check_camd3_socket 01.01.1970 01:00:20 camd3: BOXTYPE: 1 01.01.1970 01:00:21 camd3: LOG: 6 01.01.1970 01:00:21 camd3: UDP_PORT: 20248 01.01.1970 01:00:21 camd3: original slot au on 01.01.1970 01:00:21 camd3: HTTP_PORT: 9080 01.01.1970 01:00:21 camd3: LOG_HOST: 127.0.0.1:514 01.01.1970 01:00:21 camd3: DNS_CACHE: 600 sec 01.01.1970 01:00:21 camd3: SOCKET: /tmp/camd.sock01 01.01.1970 01:00:21 camd3: KEYS: /var/keys/camd3.keys 01.01.1970 01:00:21 camd3: SERVERS: /var/keys/camd3.servers 01.01.1970 01:00:21 camd3: USERS: /var/keys/camd3.users 01.01.1970 01:00:21 camd3: Slot /dev/tts/1: (carddetect=password1) initialisiere ... 01.01.1970 01:00:22 camd3: Slot /dev/tts/1: starte Monitor... 01.01.1970 01:00:22 camd3: Slot /dev/tts/1: bereit 01.01.1970 01:00:23 camd3: original slot: CAID=1702 01.01.1970 01:00:23 camd3: KeyDB: gestartet 01.01.1970 01:00:23 camd3: camd v3.868 - erfolgreich gestartet 01.01.1970 01:00:24 camd3: HTTP: started on port 9080 [getservices] /var/tuxbox/config/zapit/myservices.xml found. /tmp/currentservices.xml: No such file or directory $Id: controld.cpp,v 1.124 2006/06/27 10:21:59 barf Exp $ [controld] Boxtype detected: (3, Sagem D-BOX2) [controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1 [yhttpd] Webserver nhttpd/3.1.2 (yhttpd_core/1.2.0) [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular) [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular) [LCDFONT] Intializing font cache... [sectionsd] getUTC: read: Connection timed out [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [yhttpd] Webserver starting... /var/plugins/operations epg_reinit neutrino: /lib/libpng12.so.0: no version information available (required by neut rino) [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... [LCDFONT] FTC_Face_Requester (Fix15/Bold) [LCDFONT] FTC_Face_Requester (Fix14/Bold) /dev/input/event1: No such file or directory [neutrino] menue setup [neutrino] received 33 sats [neutrino] registering as event client [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [neutrino] initialized everything zap failed! [sectionsd] getUTC: read: Connection timed out error while loading icon: /share/tuxbox/neutrino/icons/shutdown.raw error while loading palette: /share/tuxbox/neutrino/icons/shutdown.pal zapit shot down /var/plugins/operations camd_exit /var/plugins/operations camd_stop /var/plugins/operations cardserver_stop beende camd3 01.01.1970 01:01:21 camd3: fahre runter... 01.01.1970 01:01:21 camd3: HTTP: stopped 01.01.1970 01:01:21 camd3: UDP: fahre runter... 01.01.1970 01:01:21 camd3: Slot /dev/tts/1: schliesse... 01.01.1970 01:01:21 camd3: Slot /dev/tts/1: warte auf Monitor... CXA2126 found CXA2126 found 01.01.1970 01:01:21 camd3: Slot /dev/tts/1: geschlossen 01.01.1970 01:01:21 camd3: KeyDB: beendet 01.01.1970 01:01:22 camd3: camd v3.868 - erfolgreich beendet Unmounting 'ramfs' on '/tmp' umount: Couldn't umount /tmp: No such file or directory Unmounting 'jffs2' on '/var' umount: forced umount of /var failed! Oops: umount failed :-( -- trying to remount readonly... Ready to shutdown system... The system is going down NOW !![yhttpd] !!! SIGNAL !!! :15! [yhttpd] No special SIGNAL-Handler:15! [yhttpd] stop requested...... Sending SIGKILL to all processes. Requesting system halt. #################################################### samsung fall 1 ------------------ CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Sagem, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: .... done. FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 696900 bytes loaded to 0x100000 ............................................................... Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 696836 Bytes = 680.5 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.32-dbox2 (image@tower) (gcc version 3.4.4) #1 Do Aug 31 20:09: 34 CEST 2006 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs Decrementer Frequency = 247500000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x2000) Console: colour dummy device 80x25 Calibrating delay loop... 65.74 BogoMIPS Memory: 30776k available (1184k kernel code, 348k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc. Squashfs 2.2-r2 (released 2005/09/08) © 2002-2005 Phillip Lougher i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:32:27:2b loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00540000 : "root (squashfs)" 0x00540000-0x007e0000 : "var (jffs2)" 0x007e0000-0x00800000 : "FLFS (U-Boot)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init init started: BusyBox v1.2.1 (2007.03.17-18:13+0000) multi-call event: $Id: eve nt.c,v 1.12 2003/09/30 05:45:38 obi Exp $ Detected STB: Vendor: Sagem Model: D-BOX2 [i2c-8xx]: mpc 8xx i2c init [i2c-8xx]: adapter: 0 $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $ $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $ DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600). dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $ avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $ avia_av_core: Starting avia_av_wdt thread. avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $ avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $ avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $ avia_gt_core: autodetecting chip type... eNX avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $ avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $ avia_gt_ucode: loaded ucode v0014 avia_gt_ucode: ucode section filters disabled. avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning... avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $ avia_gt_pcm_set_rate(44100) avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $ avia_gt_core: Loaded AViA eNX/GTX driver avia_av_core: Starting avia_gt_wdt thread. avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $ avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $ avia_gt_pcm_set_rate(44100) avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $ DVB: registering frontend 0:0 (VES1993)... avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $ avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $ avia_gt_proc: $Id: avia_gt_proc.c, v 0.1.3 2005/12/11 22:30:00 Skars & Merandos Exp $ avia_gt_proc: Description: GTX/ENX proc_dev Driver with proc_fs extension options: (demux reinit) enx_reset=1 (framer chan.) fc_reset=1 (clr avia reg) avia=0 (enx td trace) trace=1 (lock, unlock) spinlock=0 Schreiben ueber /proc/bus/gtx (delay) delay=500 Thu Jan 1 01:00:00 CET 1970 Please press Enter to activate this console. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx dboxide: $Id: main.c,v 1.9 2006/09/11 17:30:00 carjay Exp $ ide: late registration of driver. dboxide: activating cs2 dboxide: address space of DBox2 IDE CPLD is at: 0xc3bef000 Probing IDE interface ide0... hda: SAMSUNG SP1654N, ATA DISK drive ide0 at 0x010-0x017,0x04e on irq 47 $Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $ hda: attached ide-disk driver. hda: host protected area => 1 [sectionsd] Caching max 3000 events [sectionsd] Caching 14 days [sectionsd] Events are old 60min after their end time /var/plugins/operations logcs_init /var/plugins/operations camd_init $Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 Kroki & Worschter Exp $ [zapit] MAX_SOCKETS=3 /var/plugins/operations cardserver_start hda: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63 Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 /var/plugins/operations camd_start EXT2-fs warning (device ide0(3,2)): ext2_read_super: mounting ext3 filesystem as ext2 EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended /dev/ide/host0/bus0/target0/lun0/disc: setting drive write-caching to 0 (off) setting standby to 60 5 minutes + 0 seconds) DBox2 Multicam Driver v1.01 skars & doz21 starte camd3 /var/plugins/operations check_camd3_socket 01.01.1970 01:00:17 camd3: BOXTYPE: 1 01.01.1970 01:00:17 camd3: LOG: 6 01.01.1970 01:00:17 camd3: UDP_PORT: 20248 01.01.1970 01:00:17 camd3: original slot au on 01.01.1970 01:00:17 camd3: HTTP_PORT: 9080 01.01.1970 01:00:17 camd3: LOG_HOST: 127.0.0.1:514 01.01.1970 01:00:17 camd3: DNS_CACHE: 600 sec 01.01.1970 01:00:17 camd3: SOCKET: /tmp/camd.sock01 01.01.1970 01:00:17 camd3: KEYS: /var/keys/camd3.keys 01.01.1970 01:00:17 camd3: SERVERS: /var/keys/camd3.servers 01.01.1970 01:00:17 camd3: USERS: /var/keys/camd3.users 01.01.1970 01:00:17 camd3: Slot /dev/tts/1: (carddetect=password1) initialisiere ... 01.01.1970 01:00:18 camd3: Slot /dev/tts/1: starte Monitor... 01.01.1970 01:00:19 camd3: Slot /dev/tts/1: bereit 01.01.1970 01:00:19 camd3: original slot: CAID=1702 01.01.1970 01:00:19 camd3: KeyDB: gestartet 01.01.1970 01:00:20 camd3: camd v3.868 - erfolgreich gestartet 01.01.1970 01:00:20 camd3: HTTP: started on port 9080 [getservices] /var/tuxbox/config/zapit/myservices.xml found. /tmp/currentservices.xml: No such file or directory $Id: controld.cpp,v 1.124 2006/06/27 10:21:59 barf Exp $ [controld] Boxtype detected: (3, Sagem D-BOX2) [controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1 [yhttpd] Webserver nhttpd/3.1.2 (yhttpd_core/1.2.0) [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular) [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular) [LCDFONT] Intializing font cache... [sectionsd] getUTC: read: Connection timed out [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [yhttpd] Webserver starting... /var/plugins/operations epg_reinit neutrino: /lib/libpng12.so.0: no version information available (required by neut rino) [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... [LCDFONT] FTC_Face_Requester (Fix15/Bold) [LCDFONT] FTC_Face_Requester (Fix14/Bold) /dev/input/event1: No such file or directory [neutrino] menue setup [neutrino] received 33 sats [neutrino] registering as event client [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [neutrino] initialized everything zap failed! [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out error while loading icon: /share/tuxbox/neutrino/icons/shutdown.raw error while loading palette: /share/tuxbox/neutrino/icons/shutdown.pal [sectionsd] getUTC: read: Connection timed out zapit shot down /var/plugins/operations camd_exit /var/plugins/operations camd_stop /var/plugins/operations cardserver_stop beende camd3 01.01.1970 01:06:02 camd3: fahre runter... 01.01.1970 01:06:02 camd3: HTTP: stopped 01.01.1970 01:06:02 camd3: UDP: fahre runter... 01.01.1970 01:06:02 camd3: Slot /dev/tts/1: schliesse... 01.01.1970 01:06:02 camd3: Slot /dev/tts/1: warte auf Monitor... 01.01.1970 01:06:03 camd3: Slot /dev/tts/1: geschlossen 01.01.1970 01:06:03 camd3: KeyDB: beendet CXA2126 found CXA2126 found 01.01.1970 01:06:03 camd3: camd v3.868 - erfolgreich beendet Unmounting 'ext2' on '/hdd' Unmounting 'ramfs' on '/tmp' umount: Couldn't umount /tmp: No such file or directory Unmounting 'jffs2' on '/var' umount: forced umount of /var failed! Oops: umount failed :-( -- trying to remount readonly... Ready to shutdown system... The system is going down NOW !![yhttpd] !!! SIGNAL !!! :15! [yhttpd] No special SIGNAL-Handler:15! [yhttpd] stop requested...... Sending SIGKILL to all processes. Requesting system halt. flushing ide devices: hda +++++++++++++++++++++++++++++++++++++++++++++++++++++ wie gesagt, ich werde die gute jetzt erstmal ne weile testen und dann ggfs. neu berichten. hatte übrigens schon PB-Enigma drauf, was auch absolut stabil lief, obwohl man ja hin und wieder mal das gegenteil hört. hätte es auch beinahe draufgelassen, wäre da nicht das problem, daß ich die bereits mit neutrino aufgenommenen files nicht lesen kann. aber ich muss schon sagen, nicht schlecht, auch von den möglichkeiten neue c**mds einzufügen, menügestaltung usw. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
rich Geschrieben 24. April 2007 Melden Share Geschrieben 24. April 2007 hat zu dem ergebnis geführt, das bei einer seagate 40GB platte, auf der ich mal aufnahmen mit dem JTG-image gemacht hatte, die aber nun leer war, 1. wenn die platte vorab aufgrund langer wartezeit im ruhezustand war, diese gar nicht mehr hochfuhr, sondern aus blieb 2. wenn sie noch lief, sie mit dem ausschalten der box in den ruhezustand ging. Problem hierbei ist das die Platte laut Log nicht gemountet wurde. rich Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
blomber Geschrieben 25. April 2007 Autor Melden Share Geschrieben 25. April 2007 da müsste ich vielleicht nochmal schauen. danke für den hinweis. aber ich werde jetzt in den nächsten tagen erstmal die samsung-platten , habe da zwei identische, etwas ausführlicher testen, sobald ich dazu komme. rühr mich wieder, wenn sich da was ergibt. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
theTransporter Geschrieben 26. April 2007 Melden Share Geschrieben 26. April 2007 Mir ist grade auch aufgefallen, dass meine Box 2 Tage lang aus war, die Platte jedoch richtig warm ist. Platte war jetzt im Standby, Box wir runtergefahren, Platte geht zum unmount an und bleibt an! Gibt es schon eine Lösung für das Problem? Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
rich Geschrieben 26. April 2007 Melden Share Geschrieben 26. April 2007 @theTransporter Hast Du die drei hier im Thema gemachten Lösungsversuche schon durchprobiert? rich Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge
Archiviert
Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.