Jump to content

Dbox Bootet nicht mehr richtig!!!!


Empfohlene Beiträge

Verkaufste die Box?

 

Wenn ja nehme ich.

 

Mensch, gib doch nicht so schnell auf. Wenn da noch reaktion drauf ist, brauchst Du doch nicht gleich ne neue kaufen.

 

Also Bootlog und ggf. neu flashen!

 

Ach ja, vielleicht noch mal schildern was denn so passiert, beim flashen, welche Meldungen kommen damit man eventuell ein Fehler ausschliessen kann.

Link zu diesem Kommentar
Auf anderen Seiten teilen

Hier mal mein Bootlog beim hochfahren der Box....

 

 

?debug: DDF: Calibrating delay loop... debug: DDF: 323.4294949967 BogoMIPS

debug: BMon V1.0 mID 01

debug: feID 7a gtxID 0b

debug: fpID 5a dsID xxxxxxxxxxx

debug: HWrev X5 SWrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0032

 

will verify ELF image, start= 0x800000, size= 154948

verify sig: 262

Branching to 0x40000

 

 

U-Boot 1.1.4 (Tuxbox) (Mar 15 2006 - 10:03:44)

 

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***

Board: DBOX2, Nokia, BMon V1.0

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: . done.

find_inode failed for name=boot.conf

load: Failed to find inode

FB: ready

LCD: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 0

### FS (squashfs) loading 'vmlinuz' to 0x100000

### FS load complete: 660909 bytes loaded to 0x100000

...............................................................

Un-Protected 63 sectors

## Booting image at 00100000 ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 660845 Bytes = 645.4 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.32-dbox2 (ingo@linux) (gcc version 3.4.4) #2 Mi Mr 15 10:24:21

CET 2006

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs

Decrementer Frequency = 252000000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)

Console: colour dummy device 80x25

Calibrating delay loop... 66.96 BogoMIPS

Memory: 30844k available (1120k kernel code, 344k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.

Squashfs 2.2-r2 (released 2005/09/08) © 2002-2005 Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1c:ba:0b

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00500000 : "root (squashfs)"

0x00500000-0x007e0000 : "var (jffs2)"

0x007e0000-0x00800000 : "flfs (u-boot)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

 

@SnowHead danke schon mal

Link zu diesem Kommentar
Auf anderen Seiten teilen

  • Admin

@pille.jr

 

...

DDF: 323.4294949967 BogoMIPS

...

Irgendwas haut mit dem Timing der Box nicht hin.

Kommt diese Meldung immer? Außerdem sollte das

Log eigentlich weiterlaufen. Wie sieht denn das Log

vom Flashen eines neuen Images aus?

Link zu diesem Kommentar
Auf anderen Seiten teilen

Archiviert

Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.

  • Wer ist Online   0 Benutzer

    • Keine registrierten Benutzer online.
×
×
  • Neu erstellen...