Jump to content
Melde dich an, um diesem Inhalt zu folgen  
Gast mamamama

Boot und Flash

Empfohlene Beiträge

Gast mamamama

Hallo leute

 

Habe ein problem beim flashen und das ist mal ein auszug davon:

?debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS

debug: BMon V1.2 mID 03

debug: feID 00 enxID 03

debug: fpID 52 dsID 01-c2.58.05.08.00.00-c3

debug: HWrev 21 FPrev 0.23

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS

debug: Got Block #0052

 

will verify ELF image, start= 0x800000, size= 202740

verify sig: 262

Branching to 0x40000

 

 

PPCBoot 1.1.6 (TuxBox) (Jul 12 2002 - 21:12:06)

 

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache

Watchdog enabled

Board: DBOX2, Sagem

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: . done.

LCD: ready

FB: loading - ready

In: serial

Out: serial

Err: serial

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select (1-3), other keys to stop autoboot: 0

### FS (cramfs) loading 'vmlinuz' to 0x100000

### FS load compleate: 577057 bytes loaded to 0x100000

## Booting image at 00100000 ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 576993 Bytes = 563 kB = 0 MB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.19 (von alexW) Wer Kernels nachmacht, oder faelscht, wird best

raft ;-) #1 Son Sep 22 10:35:10 CEST 2002

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock2 console=ttyS0

Decrementer Frequency = 247500000/60

mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)

Console: colour dummy device 80x25

Calibrating delay loop... 65.53 BogoMIPS

Memory: 30944k available (1008k kernel code, 356k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.1. © 2001, 2002 Red Hat, Inc., designed by Axis Communications

AB.

i2c-core.o: i2c core module

CPM UART driver version 0.03

ttyS00 at 0x0280 is a SMC

ttyS01 at 0x0380 is a SMC

pty: 256 Unix98 ptys configured

eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:33:0d:44

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

CFI: Found no D-Box 2 flash memory device at location zero

Using buffer write method

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "flfs (ppcboot)"

0x00040000-0x00720000 : "root (cramfs)"

0x00720000-0x00800000 : "var (jffs2)"

0x00020000-0x00800000 : "flash without bootloader"

0x00000000-0x00800000 : "complete flash"

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (cramfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caEep. Child ".v1

.6.2" (ino #14) of dir ino #2 doesn't exist!

Eep. Child "start_neutrino" (ino #61) of dir ino #4 doesn't exist!

Eep. Child "cables.xml" (ino #32) of dir ino #6 doesn't exist!

Eep. Child "tuxtxt.conf" (ino #31) of dir ino #9 doesn't exist!

Eep. Child "via" (ino #217) of dir ino #47 doesn't exist!

Eep. Child "mainmenu" (ino #115) of dir ino #68 doesn't exist!

Eep. Child "startmen0.conf" (ino #69) of dir ino #68 doesn't exist!

Eep. Child "startmen1.conf" (ino #70) of dir ino #68 doesn't exist!

Eep. Child "startmen2.conf" (ino #112) of dir ino #68 doesn't exist!

jffs2_do_read_inode(): No data nodes found for ino #2

jffs2_do_read_inode(): But it has children so we fake some modes for it

jffs2_do_read_inode(): No data nodes found for ino #2

jffs2_do_read_inode(): But it has children so we fake some modes for it

jffs2_do_read_inode(): No data nodes found for ino #4

jffs2_do_read_inode(): But it has children so we fake some modes for it

jffs2_do_read_inode(): No data nodes found for ino #5

jffs2_do_read_inode(): But it has children so we fake some modes for it

jffs2_do_read_inode(): No data nodes found for ino #6

jffs2_do_read_inode(): But it has children so we fake some modes for it

Using /lib/modules/2.4.19/misc/i2c-8xx.o

jffs2_do_read_inode(): No data nodes found for ino #7

jffs2_do_read_inode(): But it has children so we fake some modes for it

[i2c-8xx]: mpc 8xx i2c init

i2c-core.o: adapter registered as adapter 0.

[i2c-8xx]: adapter: 0

jffs2_do_read_inode(): No data nodes found for ino #9

jffs2_do_read_inode(): But it has children so we fake some modes for it

Using /lib/modules/2.4.19/misc/info.o

jffs2_do_read_inode(): No data nodes found for ino #10

jffs2_do_read_inode(): But it has children so we fake some modes for it

i2c-core.o: driver FOR_PROBE_ONLY registered.

jffs2_do_read_inode(): No data nodes found for ino #11

jffs2_do_read_inode(): But it has children so we fake some modes for it

i2c-core.o: driver unregistered: FOR_PROBE_ONLY

Using /lib/modules/2.4.19/misc/event.o

event: init ...

Using /lib/modules/2.4.19/misc/avs.o

i2c-core.o: driver i2c audio/video switch driver registered.

jffs2_do_read_inode(): No data nodes found for ino #47

jffs2_do_read_inode(): But it has children so we fake some modes for it

i2c-core.o: client [CXA2126] registered to adapter [](pos. 0).

jffs2_do_read_inode(): No data nodes found for ino #53

jffs2_do_read_inode(): But it has children so we fake some modes for it

Using /lib/modules/2.4.19/misc/saa7126.o

i2c-core.o: driver i2c saa7126 driver registered.

i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).

Using /lib/modules/2.4.19/misc/fp.o

i2c-core.o: driver DBox2 Frontprocessor driver registered.

i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2

).

fp.o: clear_wakeup_timer [0][0]

Using /lib/modules/2.4.19/misc/dvb_demux.o

Using /lib/modules/2.4.19/misc/dvbdev.o

Using /lib/modules/2.4.19/misc/avia.o

AVIA: $Id: avia_core.c,v 1.32 2002/09/24 17:50:19 Jolt Exp $

avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.

insmod: init_module: avia: Input/output error

Using /lib/modules/2.4.19/misc/cam.o

der moment ist gekommen...

i2c-core.o: driver DBox2-CAM registered.

CAM: attaching CAM at 0x6e

i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).

CAM: attached to adapter

Using /lib/modules/2.4.19/misc/dmxdev.o

Using /lib/modules/2.4.19/misc/dvb_frontend.o

Using /lib/modules/2.4.19/misc/avia_gt.o

insmod: unresolved symbol avia_set_pcr

Using /lib/modules/2.4.19/misc/dvb.o

insmod: unresolved symbol avia_wait

insmod: unresolved symbol avia_wr

insmod: unresolved symbol avia_command

insmod: unresolved symbol avia_rd

insmod: unresolved symbol avia_flush_pcr

insmod: unresolved symbol avia_gt_pcm_set_mpeg_attenuation

insmod: unresolved symbol avia_gt_pcm_set_pcm_attenuation

Init VES1993

Using /lib/modules/2.4.19/misc/ves1993.o

insmod: unresolved symbol register_frontend

insmod: unresolved symbol unregister_frontend

Using /lib/modules/2.4.19/misc/avia_gt_napi.o

insmod: unresolved symbol avia_gt_dmx_queue_reset

insmod: unresolved symbol unregister_demux

insmod: unresolved symbol avia_gt_dmx_queue_irq_enable

insmod: unresolved symbol avia_gt_dmx_set_pcr_pid

insmod: unresolved symbol avia_gt_dmx_release_section_filter

insmod: unresolved symbol avia_gt_dmx_alloc_queue_teletext

insmod: unresolved symbol avia_gt_dmx_fake_queue_irq

insmod: unresolved symbol avia_gt_dmx_get_queue_irq

insmod: unresolved symbol avia_gt_dmx_set_filter_parameter_table

insmod: unresolved symbol register_demux

insmod: unresolved symbol avia_gt_dmx_set_pid_table

insmod: unresolved symbol avia_gt_dmx_force_discontinuity

insmod: unresolved symbol avia_gt_dmx_set_pid_control_table

insmod: unresolved symbol avia_gt_dmx_get_hw_sec_filt_avail

insmod: unresolved symbol avia_gt_dmx_get_queue_info

insmod: unresolved symbol avia_gt_dmx_set_section_filter

insmod: unresolved symbol avia_gt_get_info

insmod: unresolved symbol avia_gt_dmx_alloc_queue_video

insmod: unresolved symbol avia_gt_dmx_free_queue

insmod: unresolved symbol avia_gt_dmx_queue_irq_disable

insmod: unresolved symbol avia_gt_dmx_alloc_queue_audio

insmod: unresolved symbol avia_gt_dmx_alloc_queue_message

insmod: unresolved symbol avia_gt_dmx_alloc_queue_user

insmod: unresolved symbol avia_gt_free_irq

Using /lib/modules/2.4.19/misc/avia_gt_vbi.o

insmod: unresolved symbol avia_gt_get_info

Using /lib/modules/2.4.19/misc/avia_gt_fb.o

insmod: unresolved symbol avia_gt_gv_show

insmod: unresolved symbol avia_gt_gv_get_clut

insmod: unresolved symbol avia_gt_gv_set_input_size

insmod: unresolved symbol avia_gt_gv_set_pos

insmod: unresolved symbol avia_gt_gv_hide

insmod: unresolved symbol avia_gt_get_info

insmod: unresolved symbol avia_gt_gv_set_size

insmod: unresolved symbol avia_gt_gv_set_input_mode

insmod: unresolved symbol avia_gt_gv_set_clut

insmod: unresolved symbol avia_gt_gv_set_blevel

insmod: unresolved symbol avia_gt_gv_get_info

Using /lib/modules/2.4.19/misc/avia_gt_oss.o

insmod: unresolved symbol avia_gt_pcm_play_buffer

insmod: unresolved symbol avia_gt_pcm_stop

insmod: unresolved symbol avia_gt_pcm_set_signed

insmod: unresolved symbol avia_gt_pcm_set_endian

insmod: unresolved symbol avia_gt_pcm_set_rate

insmod: unresolved symbol avia_standby

insmod: unresolved symbol avia_gt_pcm_set_width

insmod: unresolved symbol avia_gt_pcm_poll

insmod: unresolved symbol avia_get_sample_rate

insmod: unresolved symbol avia_gt_pcm_set_channels

insmod: unresolved symbol avia_gt_pcm_set_pcm_attenuation

insmod: unresolved symbol avia_gt_pcm_get_block_size

Using /lib/modules/2.4.19/misc/avia_gt_lirc.o

insmod: unresolved symbol avia_gt_ir_receive_pulse

insmod: unresolved symbol avia_gt_ir_receive_data

insmod: unresolved symbol avia_gt_ir_get_rx_buffer_write_position

insmod: unresolved symbol avia_gt_ir_send_buffer

insmod: unresolved symbol avia_gt_ir_queue_pulse

insmod: unresolved symbol avia_gt_ir_set_duty_cycle

insmod: unresolved symbol avia_gt_ir_set_frequency

insmod: unresolved symbol avia_gt_ir_get_rx_buffer_read_position

jffs2_do_read_inode() on nonexistent ino 61

Using /lib/modules/2.4.19/misc/lcd.o

/etc/init.d/rcS: /var/tuxbox/start_neutrino: Input/output error

 

Please press Enter to activate this console. lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface on 3

 

so sieht meine box beim boot aus aber sie bleibt einfach stehen und fährt nicht hoch was kann ich tun?

Diesen Beitrag teilen


Link zum Beitrag
Auf anderen Seiten teilen
Melde dich an, um diesem Inhalt zu folgen  

×
×
  • Neu erstellen...