Jump to content

Boot und Flash


Guest mamamama
 Share

Recommended Posts

Guest mamamama

Hallo leute

 

Habe ein problem beim flashen und das ist mal ein auszug davon:

?debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS

debug: BMon V1.2 mID 03

debug: feID 00 enxID 03

debug: fpID 52 dsID 01-c2.58.05.08.00.00-c3

debug: HWrev 21 FPrev 0.23

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS

debug: Got Block #0052

 

will verify ELF image, start= 0x800000, size= 202740

verify sig: 262

Branching to 0x40000

 

 

PPCBoot 1.1.6 (TuxBox) (Jul 12 2002 - 21:12:06)

 

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache

Watchdog enabled

Board: DBOX2, Sagem

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: . done.

LCD: ready

FB: loading - ready

In: serial

Out: serial

Err: serial

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select (1-3), other keys to stop autoboot: 0

### FS (cramfs) loading 'vmlinuz' to 0x100000

### FS load compleate: 577057 bytes loaded to 0x100000

## Booting image at 00100000 ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 576993 Bytes = 563 kB = 0 MB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.19 (von alexW) Wer Kernels nachmacht, oder faelscht, wird best

raft ;-) #1 Son Sep 22 10:35:10 CEST 2002

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock2 console=ttyS0

Decrementer Frequency = 247500000/60

mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)

Console: colour dummy device 80x25

Calibrating delay loop... 65.53 BogoMIPS

Memory: 30944k available (1008k kernel code, 356k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.1. © 2001, 2002 Red Hat, Inc., designed by Axis Communications

AB.

i2c-core.o: i2c core module

CPM UART driver version 0.03

ttyS00 at 0x0280 is a SMC

ttyS01 at 0x0380 is a SMC

pty: 256 Unix98 ptys configured

eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:33:0d:44

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

CFI: Found no D-Box 2 flash memory device at location zero

Using buffer write method

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "flfs (ppcboot)"

0x00040000-0x00720000 : "root (cramfs)"

0x00720000-0x00800000 : "var (jffs2)"

0x00020000-0x00800000 : "flash without bootloader"

0x00000000-0x00800000 : "complete flash"

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (cramfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caEep. Child ".v1

.6.2" (ino #14) of dir ino #2 doesn't exist!

Eep. Child "start_neutrino" (ino #61) of dir ino #4 doesn't exist!

Eep. Child "cables.xml" (ino #32) of dir ino #6 doesn't exist!

Eep. Child "tuxtxt.conf" (ino #31) of dir ino #9 doesn't exist!

Eep. Child "via" (ino #217) of dir ino #47 doesn't exist!

Eep. Child "mainmenu" (ino #115) of dir ino #68 doesn't exist!

Eep. Child "startmen0.conf" (ino #69) of dir ino #68 doesn't exist!

Eep. Child "startmen1.conf" (ino #70) of dir ino #68 doesn't exist!

Eep. Child "startmen2.conf" (ino #112) of dir ino #68 doesn't exist!

jffs2_do_read_inode(): No data nodes found for ino #2

jffs2_do_read_inode(): But it has children so we fake some modes for it

jffs2_do_read_inode(): No data nodes found for ino #2

jffs2_do_read_inode(): But it has children so we fake some modes for it

jffs2_do_read_inode(): No data nodes found for ino #4

jffs2_do_read_inode(): But it has children so we fake some modes for it

jffs2_do_read_inode(): No data nodes found for ino #5

jffs2_do_read_inode(): But it has children so we fake some modes for it

jffs2_do_read_inode(): No data nodes found for ino #6

jffs2_do_read_inode(): But it has children so we fake some modes for it

Using /lib/modules/2.4.19/misc/i2c-8xx.o

jffs2_do_read_inode(): No data nodes found for ino #7

jffs2_do_read_inode(): But it has children so we fake some modes for it

[i2c-8xx]: mpc 8xx i2c init

i2c-core.o: adapter registered as adapter 0.

[i2c-8xx]: adapter: 0

jffs2_do_read_inode(): No data nodes found for ino #9

jffs2_do_read_inode(): But it has children so we fake some modes for it

Using /lib/modules/2.4.19/misc/info.o

jffs2_do_read_inode(): No data nodes found for ino #10

jffs2_do_read_inode(): But it has children so we fake some modes for it

i2c-core.o: driver FOR_PROBE_ONLY registered.

jffs2_do_read_inode(): No data nodes found for ino #11

jffs2_do_read_inode(): But it has children so we fake some modes for it

i2c-core.o: driver unregistered: FOR_PROBE_ONLY

Using /lib/modules/2.4.19/misc/event.o

event: init ...

Using /lib/modules/2.4.19/misc/avs.o

i2c-core.o: driver i2c audio/video switch driver registered.

jffs2_do_read_inode(): No data nodes found for ino #47

jffs2_do_read_inode(): But it has children so we fake some modes for it

i2c-core.o: client [CXA2126] registered to adapter [](pos. 0).

jffs2_do_read_inode(): No data nodes found for ino #53

jffs2_do_read_inode(): But it has children so we fake some modes for it

Using /lib/modules/2.4.19/misc/saa7126.o

i2c-core.o: driver i2c saa7126 driver registered.

i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).

Using /lib/modules/2.4.19/misc/fp.o

i2c-core.o: driver DBox2 Frontprocessor driver registered.

i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2

).

fp.o: clear_wakeup_timer [0][0]

Using /lib/modules/2.4.19/misc/dvb_demux.o

Using /lib/modules/2.4.19/misc/dvbdev.o

Using /lib/modules/2.4.19/misc/avia.o

AVIA: $Id: avia_core.c,v 1.32 2002/09/24 17:50:19 Jolt Exp $

avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.

insmod: init_module: avia: Input/output error

Using /lib/modules/2.4.19/misc/cam.o

der moment ist gekommen...

i2c-core.o: driver DBox2-CAM registered.

CAM: attaching CAM at 0x6e

i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).

CAM: attached to adapter

Using /lib/modules/2.4.19/misc/dmxdev.o

Using /lib/modules/2.4.19/misc/dvb_frontend.o

Using /lib/modules/2.4.19/misc/avia_gt.o

insmod: unresolved symbol avia_set_pcr

Using /lib/modules/2.4.19/misc/dvb.o

insmod: unresolved symbol avia_wait

insmod: unresolved symbol avia_wr

insmod: unresolved symbol avia_command

insmod: unresolved symbol avia_rd

insmod: unresolved symbol avia_flush_pcr

insmod: unresolved symbol avia_gt_pcm_set_mpeg_attenuation

insmod: unresolved symbol avia_gt_pcm_set_pcm_attenuation

Init VES1993

Using /lib/modules/2.4.19/misc/ves1993.o

insmod: unresolved symbol register_frontend

insmod: unresolved symbol unregister_frontend

Using /lib/modules/2.4.19/misc/avia_gt_napi.o

insmod: unresolved symbol avia_gt_dmx_queue_reset

insmod: unresolved symbol unregister_demux

insmod: unresolved symbol avia_gt_dmx_queue_irq_enable

insmod: unresolved symbol avia_gt_dmx_set_pcr_pid

insmod: unresolved symbol avia_gt_dmx_release_section_filter

insmod: unresolved symbol avia_gt_dmx_alloc_queue_teletext

insmod: unresolved symbol avia_gt_dmx_fake_queue_irq

insmod: unresolved symbol avia_gt_dmx_get_queue_irq

insmod: unresolved symbol avia_gt_dmx_set_filter_parameter_table

insmod: unresolved symbol register_demux

insmod: unresolved symbol avia_gt_dmx_set_pid_table

insmod: unresolved symbol avia_gt_dmx_force_discontinuity

insmod: unresolved symbol avia_gt_dmx_set_pid_control_table

insmod: unresolved symbol avia_gt_dmx_get_hw_sec_filt_avail

insmod: unresolved symbol avia_gt_dmx_get_queue_info

insmod: unresolved symbol avia_gt_dmx_set_section_filter

insmod: unresolved symbol avia_gt_get_info

insmod: unresolved symbol avia_gt_dmx_alloc_queue_video

insmod: unresolved symbol avia_gt_dmx_free_queue

insmod: unresolved symbol avia_gt_dmx_queue_irq_disable

insmod: unresolved symbol avia_gt_dmx_alloc_queue_audio

insmod: unresolved symbol avia_gt_dmx_alloc_queue_message

insmod: unresolved symbol avia_gt_dmx_alloc_queue_user

insmod: unresolved symbol avia_gt_free_irq

Using /lib/modules/2.4.19/misc/avia_gt_vbi.o

insmod: unresolved symbol avia_gt_get_info

Using /lib/modules/2.4.19/misc/avia_gt_fb.o

insmod: unresolved symbol avia_gt_gv_show

insmod: unresolved symbol avia_gt_gv_get_clut

insmod: unresolved symbol avia_gt_gv_set_input_size

insmod: unresolved symbol avia_gt_gv_set_pos

insmod: unresolved symbol avia_gt_gv_hide

insmod: unresolved symbol avia_gt_get_info

insmod: unresolved symbol avia_gt_gv_set_size

insmod: unresolved symbol avia_gt_gv_set_input_mode

insmod: unresolved symbol avia_gt_gv_set_clut

insmod: unresolved symbol avia_gt_gv_set_blevel

insmod: unresolved symbol avia_gt_gv_get_info

Using /lib/modules/2.4.19/misc/avia_gt_oss.o

insmod: unresolved symbol avia_gt_pcm_play_buffer

insmod: unresolved symbol avia_gt_pcm_stop

insmod: unresolved symbol avia_gt_pcm_set_signed

insmod: unresolved symbol avia_gt_pcm_set_endian

insmod: unresolved symbol avia_gt_pcm_set_rate

insmod: unresolved symbol avia_standby

insmod: unresolved symbol avia_gt_pcm_set_width

insmod: unresolved symbol avia_gt_pcm_poll

insmod: unresolved symbol avia_get_sample_rate

insmod: unresolved symbol avia_gt_pcm_set_channels

insmod: unresolved symbol avia_gt_pcm_set_pcm_attenuation

insmod: unresolved symbol avia_gt_pcm_get_block_size

Using /lib/modules/2.4.19/misc/avia_gt_lirc.o

insmod: unresolved symbol avia_gt_ir_receive_pulse

insmod: unresolved symbol avia_gt_ir_receive_data

insmod: unresolved symbol avia_gt_ir_get_rx_buffer_write_position

insmod: unresolved symbol avia_gt_ir_send_buffer

insmod: unresolved symbol avia_gt_ir_queue_pulse

insmod: unresolved symbol avia_gt_ir_set_duty_cycle

insmod: unresolved symbol avia_gt_ir_set_frequency

insmod: unresolved symbol avia_gt_ir_get_rx_buffer_read_position

jffs2_do_read_inode() on nonexistent ino 61

Using /lib/modules/2.4.19/misc/lcd.o

/etc/init.d/rcS: /var/tuxbox/start_neutrino: Input/output error

 

Please press Enter to activate this console. lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface on 3

 

so sieht meine box beim boot aus aber sie bleibt einfach stehen und fährt nicht hoch was kann ich tun?

Link to comment
Share on other sites

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...