Jump to content

Coolstream Trinity funktioniert nicht mehr

birgi

Von birgi
in Allgemein

 Share

Empfohlene Beiträge

birgi

birgi

Geschrieben
Geschrieben

Aus "heiterem Himmel" liess sich meine Trinity nicht mehr einschalten. Es erscheint der Bildschirm beim Neubooten  "Coolstream" , dann der Bildschirm "Keywelt Image". Hierbei leuchtet grüne LED an der Box. Dann wird Bildschirm schwarz, grüne LED aus und das war es. Es tut sich nichts mehr.

Ich habe Stick mit FAT32 formatiert und das Emergency Tool darauf entpackt und versucht neu zu flashen. Nach dem Drücken der Power-Taste wird LED für ca 10 sec rot, dann geht sie aus und nach einer Weile kommt die grüne LED und Box bootet. Hierbei hab ich stick entfernt. Aber das Booten verläuft wie zuvor, erst Coolstream Bild .dann Keywelt Bild dann gar nix mehr.

Was kann es sein? Was kann ich noch tun? Box defekt?

Link zu diesem Kommentar
Auf anderen Seiten teilen
birgi

birgi

Geschrieben
  • Autor
Geschrieben

Danke Gandalf. Ist mir klar, dass man Genaueres erst nach einem Log sagen kann. Hab leider keine serielle Schnittstelle am PC mehr. Auch kein Nullmodemkabel. Genügt mit Usb auf seriell ein normales serielles Kabel von Adapter zur Box? 

Habe zum Glück noch weitere Coolstream Trinity als Reserve, so dass ich mir Zeit lassen kann. Schon seltsam, innerhalb einer Woche zweite Coolsream futsch. Die andere ist eine Trinity duo , bei der geht Tuner 1 nicht mehr. Hab da umgestellt auf 2. Tuner. Eigentlich wollte ich mir VU zulegen, um die neuen Möglichkeiten zu nutzen. So werde ich mich nächste Zeit um einen Log kümmern und mir mal die Elkos der Duo anschauen.

Link zu diesem Kommentar
Auf anderen Seiten teilen
birgi

birgi

Geschrieben
  • Autor
Geschrieben (bearbeitet)
Spoiler

startet at 14.10.2022 16:02:55
------------------------------
Starting Microloader ASM built on Mar 28 2016 17:59:53...
Initializing PLLs...
Initializing Clocks..
Initializing DDR PLLs/Clocks...
Initializing DDR controller...
Initializing data section...
Initializing stack ptr...
Switching to 'C' code...
Starting Microloader C...
Chip: SHINER-IP
Found Internal Ethernet PHY on GMAC0....
Checking for Guide button press ...
GCS in ISA MODE
GCS: SFC DEVICE SETUP COMPLETE
MMC:No device found
BOX MAC OK!
BOX: Type: TRINITY Rev: 84700104
Setting up default ATAG list...
Jumping to U-Boot ...
BOOT_TIME: 722 ms since POR
(B)B[?3l[0m[44m[97m[2J[1;1H --------------------------------------------------------------------------------
| U-Boot 2009.08-00068-g69a4049 (Dec 10 2015 - 14:38:00)               CST HDx |
|------------------------------------------------------------------------------|
| Chipset information                                                          |
| Vendor: NXP       Type: Shiner-IP        Revision: M1        Fuses: 0015706B |
|------------------------------------------------------------------------------|
| Clock information                                                            |
| *** not available yet ***                                                    |
|------------------------------------------------------------------------------|
| Frontpanel information                                                       |
| Vendor: CST       Version: 5.1           Display: none                       |
|------------------------------------------------------------------------------|
| Memory configuration                                                         |
| Start    | End      | Type    | Description                                  |
|----------+----------+---------+----------------------------------------------|
| 00000000 | 0FFFFFFF | RAM     | System main memory bank #0 (256M)            |
| 20000000 | 2FFFFFFF | RAM     | System main memory bank #1 (256M)            |
| D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 (  4M /  64K x  64)      |
  0%  3%  6%  9% 12% 15% 18% 21% 24% 28% 31% 34% 37% 40% 43% 46% 49% 53% 56% 59% 62% 65% 68% 71% 74% 78% 81% 84% 87% 90% 93% 96% 99%  *** Warning - bad CRC or SFC, using default environment
| 00000000*| 1FFFFFFF*| NAND    | Toshiba NAND 512MiB 3,3V 8-bit               |
|------------------------------------------------------------------------------|
| Network configuration                                                        |
| MAC: LIP 6300                    address: 00-C5-5C-26-BE-32                  |
--------------------------------------------------------------------------------
Hit any key to stop autoboot:  3 2 1 0
SFC read: offset 0x100000, size 0x300000
  0%  0%  0%  0%  0%  0%  0%  0%  1%  1%  1%  1%  1%  1%  1%  1%  2%  2%  2%  2%  2%  2%  2%  2%  3%  3%  3%  3%  3%  3%  3%  4%  4%  4%  4%  4%  4%  4%  4%  5%  5%  5%  5%  5%  5%  5%  5%  6%  6%  6%  6%  6%  6%  6%  7%  7%  7%  7%  7%  7%  7%  7%  8%  8%  8%  8%  8%  8%  8%  8%  9%  9%  9%  9%  9%  9%  9% 10% 10% 10% 10% 10% 10% 10% 10% 11% 11% 11% 11% 11% 11% 11% 11% 12% 12% 12% 12% 12% 12% 12% 13% 13% 13% 13% 13% 13% 13% 13% 14% 14% 14% 14% 14% 14% 14% 14% 15% 15% 15% 15% 15% 15% 15% 15% 16% 16% 16% 16% 16% 16% 16% 17% 17% 17% 17% 17% 17% 17% 17% 18% 18% 18% 18% 18% 18% 18% 18% 19% 19% 19% 19% 19% 19% 19% 20% 20% 20% 20% 20% 20% 20% 20% 21% 21% 21% 21% 21% 21% 21% 21% 22% 22% 22% 22% 22% 22% 22% 23% 23% 23% 23% 23% 23% 23% 23% 24% 24% 24% 24% 24% 24% 24% 24% 25% 25% 25% 25% 25% 25% 25% 26% 26% 26% 26% 26% 26% 26% 26% 27% 27% 27% 27% 27% 27% 27% 27% 28% 28% 28% 28% 28% 28% 28% 29% 29% 29% 29% 29% 29% 29% 29% 30% 30% 30% 30% 30% 30% 30% 30% 31% 31% 31% 31% 31% 31% 31% 31% 32% 32% 32% 32% 32% 32% 32% 33% 33% 33% 33% 33% 33% 33% 33% 34% 34% 34% 34% 34% 34% 34% 34% 35% 35% 35% 35% 35% 35% 35% 36% 36% 36% 36% 36% 36% 36% 36% 37% 37% 37% 37% 37% 37% 37% 37% 38% 38% 38% 38% 38% 38% 38% 39% 39% 39% 39% 39% 39% 39% 39% 40% 40% 40% 40% 40% 40% 40% 40% 41% 41% 41% 41% 41% 41% 41% 42% 42% 42% 42% 42% 42% 42% 42% 43% 43% 43% 43% 43% 43% 43% 43% 44% 44% 44% 44% 44% 44% 44% 45% 45% 45% 45% 45% 45% 45% 45% 46% 46% 46% 46% 46% 46% 46% 46% 47% 47% 47% 47% 47% 47% 47% 47% 48% 48% 48% 48% 48% 48% 48% 49% 49% 49% 49% 49% 49% 49% 49% 50% 50% 50% 50% 50% 50% 50% 50% 51% 51% 51% 51% 51% 51% 51% 52% 52% 52% 52% 52% 52% 52% 52% 53% 53% 53% 53% 53% 53% 53% 53% 54% 54% 54% 54% 54% 54% 54% 55% 55% 55% 55% 55% 55% 55% 55% 56% 56% 56% 56% 56% 56% 56% 56% 57% 57% 57% 57% 57% 57% 57% 58% 58% 58% 58% 58% 58% 58% 58% 59% 59% 59% 59% 59% 59% 59% 59% 60% 60% 60% 60% 60% 60% 60% 61% 61% 61% 61% 61% 61% 61% 61% 62% 62% 62% 62% 62% 62% 62% 62% 63% 63% 63% 63% 63% 63% 63% 63% 64% 64% 64% 64% 64% 64% 64% 65% 65% 65% 65% 65% 65% 65% 65% 66% 66% 66% 66% 66% ## Booting kernel from Legacy Image at 01000000 ...
   Image Name:   Coolstream Kernel (compressed)
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3044928 Bytes =  2.9 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Linux version 3.10.93 (image@server) (gcc version 6.3.1 20170109 (crosstool-NG 1) ) #1 SMP Wed Apr 18 11:46:15 CEST 2018
[    0.000000] CPU: ARMv7 Processor [411fc091] revision 1 (ARMv7), cr=10c53c7d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Entropic Apollo STB Platform with FDT, model: CoolStream HD2 Apollo STB
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] Early platform io descriptors mapping...
[    0.000000] PERCPU: Embedded 7 pages/cpu @8090e000 s5952 r8192 d14528 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: noinitrd console=ttyS0,115200n8 mtdparts=e0632000.flash_sfc:256k@0k(uldr),512k@256k(u-boot),128k@768k(env),128k@896k(spare),-(kernel);e0631000.flash_nand:256m@0k(root0),32m@256m(var),-(root1) root=mtd:root0 rootfstype=jffs2 rw
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 256MB 256MB = 512MB total
[    0.000000] Memory: 246968k/246968k available, 277320k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xa0800000 - 0xff000000   (1512 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
[    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
[    0.000000]       .text : 0x80008000 - 0x80676d30   (6588 kB)
[    0.000000]       .init : 0x80677000 - 0x806a6740   ( 190 kB)
[    0.000000]       .data : 0x806a8000 - 0x806e9de0   ( 264 kB)
[    0.000000]        .bss : 0x806e9de0 - 0x80705364   ( 110 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU debugfs-based tracing is enabled.
[    0.000000]     Additional per-CPU info printed with stalls.
[    0.000000]     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:388
[    0.000000] GIC CPU mask not found - kernel will fail to boot.
[    0.000000] GIC CPU mask not found - kernel will fail to boot.
[    0.000000] smp_twd: clock not found -2
[    0.000000] Unable to get timer clock. Assuming 50Mhz input clock.
[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000] stb-timer: system timer (irq = 58, rate 50000000)
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [ttyS0] enabled
[    0.250500] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
[    0.342784] pid_max: default: 32768 minimum: 301
[    0.347624] Mount-cache hash table entries: 512
[    0.354178] CPU: Testing write buffer coherency: ok
[    0.359307] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.364958] Setting up static identity map for 0x803dab08 - 0x803dab60
[    0.371507] L310 cache controller enabled
[    0.375427] l2x0: 8 ways, CACHE_ID 0x410004c4, AUX_CTRL 0x32421001, Cache size: 131072 B
[    0.384138] Brought up 1 CPUs
[    0.387014] SMP: Total of 1 processors activated (1196.85 BogoMIPS).
[    0.393339] CPU: All CPU(s) started in SVC mode.
[    0.398703] devtmpfs: initialized
[    0.409014] NET: Registered protocol family 16
[    0.414094] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.551128] GMAC0: active interface is 1
[    0.555134] ChipID=0x3 ChipRevID=0x2
[    0.558755] nx_dmac: Registered with 8 channels
[    0.588133] bio: create slab <bio-0> at 0
[    0.593592] GPIO: base febd5000 (phys e06d5000)
[    0.598227] GPIO: base feb69000 (phys e0669000)
[    0.604705] SCSI subsystem initialized
[    0.609836] usbcore: registered new interface driver usbfs
[    0.615547] usbcore: registered new interface driver hub
[    0.621260] usbcore: registered new device driver usb
[    0.626727] pps_core: LinuxPPS API ver. 1 registered
[    0.631659] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.640887] PTP clock support registered
[    0.646922] cfg80211: Calling CRDA to update world regulatory domain
[    0.654794] Switching to clocksource timer_us
[    0.679442] NET: Registered protocol family 2
[    0.684682] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.691769] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.698180] TCP: Hash tables configured (established 4096 bind 4096)
[    0.704503] TCP: reno registered
[    0.707651] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.713496] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.719931] NET: Registered protocol family 1
[    0.724579] RPC: Registered named UNIX socket transport module.
[    0.730481] RPC: Registered udp transport module.
[    0.735081] RPC: Registered tcp transport module.
[    0.739746] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.746341] PM: STB Platform power mgmt initialization.
[    0.876395] bounce pool size: 64 pages
[    0.895235] NFS: Registering the id_resolver key type
[    0.900308] Key type id_resolver registered
[    0.904392] Key type id_legacy registered
[    0.908379] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.914833] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.923099] msgmni has been set to 482
[    0.928298] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.935671] io scheduler noop registered
[    0.939495] io scheduler deadline registered
[    0.944411] io scheduler cfq registered (default)
[    0.949719] e06e2000.serial: ttyS0 at MMIO 0xe06e2000 (irq = 47) is a uart-ip3106
[    0.964874] loop: module loaded
[    0.969071] ahci-stb e0638000.sata: unable to find phy
[    0.974190] SATA: Adjusting los_lvl (rd_val=0x8a46, wr_val=0x8ae6)
[    0.980279] SATA: Adjusting rx_term_en0/1 (rd_val=0x2750275, wr_val=0x2770277)
[    0.987478] ahci-stb e0638000.sata: SSS flag set, parallel bus scan disabled
[    0.994483] ahci-stb e0638000.sata: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl platform mode
[    1.003262] ahci-stb e0638000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc sxs
[    1.014653] scsi0 : ahci_platform
[    1.018525] scsi1 : ahci_platform
[    1.022428] ata1: SATA max UDMA/133 mmio [mem 0xe0638000-0xe0638fff] port 0x100 irq 39
[    1.030277] ata2: SATA max UDMA/133 mmio [mem 0xe0638000-0xe0638fff] port 0x180 irq 39
[    1.039953] NAND device: Manufacturer ID: 0x98, Chip ID: 0xdc (Toshiba NAND 512MiB 3,3V 8-bit), 512MiB, page size: 2048, OOB size: 64
[    1.052322] Bad block table found at page 262080, version 0x01
[    1.058430] Bad block table found at page 262016, version 0x01
[    1.064543] 3 cmdlinepart partitions found on MTD device e0631000.flash_nand
[    1.071514] Creating 3 MTD partitions on "e0631000.flash_nand":
[    1.077361] 0x000000000000-0x000010000000 : "root0"
[    1.084108] 0x000010000000-0x000012000000 : "var"
[    1.090346] 0x000012000000-0x000020000000 : "root1"
[    1.098805] JEDEC ID = 0x1c3016 , Extended Device ID = 0x1c30
[    1.104623] nx_sfc e0632000.flash_sfc: en25q32 (4096 Kbytes)
[    1.110214] 5 cmdlinepart partitions found on MTD device e0632000.flash_sfc
[    1.117091] Creating 5 MTD partitions on "e0632000.flash_sfc":
[    1.122897] 0x000000000000-0x000000040000 : "uldr"
[    1.129377] 0x000000040000-0x0000000c0000 : "u-boot"
[    1.135913] 0x0000000c0000-0x0000000e0000 : "env"
[    1.142437] 0x0000000e0000-0x000000100000 : "spare"
[    1.148808] 0x000000100000-0x000000400000 : "kernel"
[    1.156164] tun: Universal TUN/TAP device driver, 1.6
[    1.161206] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.167894]     DWMAC1000
[    1.170206] stmmac - user ID: 0x25, Synopsys ID: 0x35
[    1.175175]  Ring mode enabled
[    1.178200]  DMA HW capability register supported
[    1.182705]  Enhanced/Alternate descriptors
[    1.187012]     Enabled extended descriptors
[    1.190999]  RX Checksum Offload Engine supported (type 2)
[    1.196429]  TX Checksum insertion supported
[    1.200671]  Wake-Up On Lan supported
[    1.204329]  Enable RX Mitigation via HW Watchdog Timer
[    1.225299] libphy: stmmac: probed
[    1.228614] eth0: PHY ID 0293c411 at 0 IRQ POLL (stmmac-0:00) active
[    1.234992] eth0: PHY ID 00000000 at 1 IRQ POLL (stmmac-0:01)
[    1.240650] eth0: PHY ID 00000000 at 2 IRQ POLL (stmmac-0:02)
[    1.246339] eth0: PHY ID 00000000 at 3 IRQ POLL (stmmac-0:03)
[    1.252051] eth0: PHY ID 00000000 at 4 IRQ POLL (stmmac-0:04)
[    1.257743] eth0: PHY ID 00000000 at 5 IRQ POLL (stmmac-0:05)
[    1.263453] eth0: PHY ID 00000000 at 6 IRQ POLL (stmmac-0:06)
[    1.269147] eth0: PHY ID 00000000 at 7 IRQ POLL (stmmac-0:07)
[    1.274862] eth0: PHY ID 00000000 at 8 IRQ POLL (stmmac-0:08)
[    1.280563] eth0: PHY ID 00000000 at 9 IRQ POLL (stmmac-0:09)
[    1.286255] eth0: PHY ID 00000000 at 10 IRQ POLL (stmmac-0:0a)
[    1.292052] eth0: PHY ID 00000000 at 11 IRQ POLL (stmmac-0:0b)
[    1.297832] eth0: PHY ID 00000000 at 12 IRQ POLL (stmmac-0:0c)
[    1.303629] eth0: PHY ID 00000000 at 13 IRQ POLL (stmmac-0:0d)
[    1.309409] eth0: PHY ID 00000000 at 14 IRQ POLL (stmmac-0:0e)
[    1.315206] eth0: PHY ID 00000000 at 15 IRQ POLL (stmmac-0:0f)
[    1.320994] eth0: PHY ID 00000000 at 16 IRQ POLL (stmmac-0:10)
[    1.326776] eth0: PHY ID 00000000 at 17 IRQ POLL (stmmac-0:11)
[    1.332573] eth0: PHY ID 00000000 at 18 IRQ POLL (stmmac-0:12)
[    1.338354] eth0: PHY ID 00000000 at 19 IRQ POLL (stmmac-0:13)
[    1.344150] eth0: PHY ID 00000000 at 20 IRQ POLL (stmmac-0:14)
[    1.349931] eth0: PHY ID 00000000 at 21 IRQ POLL (stmmac-0:15)
[    1.355728] eth0: PHY ID 00000000 at 22 IRQ POLL (stmmac-0:16)
[    1.361516] eth0: PHY ID 00000000 at 23 IRQ POLL (stmmac-0:17)
[    1.367297] eth0: PHY ID 00000000 at 24 IRQ POLL (stmmac-0:18)
[    1.373094] eth0: PHY ID 00000000 at 25 IRQ POLL (stmmac-0:19)
[    1.378875] eth0: PHY ID 00000000 at 26 IRQ POLL (stmmac-0:1a)
[    1.384671] eth0: PHY ID 00000000 at 27 IRQ POLL (stmmac-0:1b)
[    1.390460] eth0: PHY ID 00000000 at 28 IRQ POLL (stmmac-0:1c)
[    1.396241] eth0: PHY ID 00000000 at 29 IRQ POLL (stmmac-0:1d)
[    1.402037] eth0: PHY ID 00000000 at 30 IRQ POLL (stmmac-0:1e)
[    1.407818] eth0: PHY ID 00000000 at 31 IRQ POLL (stmmac-0:1f)
[    1.413895] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.420510] ehci-platform: EHCI generic platform driver
[    1.425740] ehci-platform e066c000.usb: EHCI Host Controller
[    1.431382] ehci-platform e066c000.usb: new USB bus registered, assigned bus number 1
[    1.439226] ehci-platform e066c000.usb: irq 93, io mem 0xe066c000
[    1.460130] ehci-platform e066c000.usb: USB 2.0 started, EHCI 1.00
[    1.466305] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.473032] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.480180] usb usb1: Product: EHCI Host Controller
[    1.484993] usb usb1: Manufacturer: Linux 3.10.93 ehci_hcd
[    1.490457] usb usb1: SerialNumber: e066c000.usb
[    1.496026] hub 1-0:1.0: USB hub found
[    1.499700] hub 1-0:1.0: 1 port detected
[    1.503865] ehci-platform e066d000.usb: EHCI Host Controller
[    1.509439] ehci-platform e066d000.usb: new USB bus registered, assigned bus number 2
[    1.517383] ehci-platform e066d000.usb: irq 94, io mem 0xe066d000
[    1.523492] ata1: SATA link down (SStatus 0 SControl 300)
[    1.540093] ehci-platform e066d000.usb: USB 2.0 started, EHCI 1.00
[    1.546245] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.552955] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.560105] usb usb2: Product: EHCI Host Controller
[    1.564931] usb usb2: Manufacturer: Linux 3.10.93 ehci_hcd
[    1.570384] usb usb2: SerialNumber: e066d000.usb
[    1.575893] hub 2-0:1.0: USB hub found
[    1.579567] hub 2-0:1.0: 1 port detected
[    1.584275] usbcore: registered new interface driver usb-storage
[    1.590722] usbcore: registered new interface driver usbserial
[    1.598045] sdhci: Secure Digital Host Controller Interface driver
[    1.604204] sdhci: Copyright(c) Pierre Ossman
[    1.608540] stb-sdhci e0635000.sdhci: SDHC/MMC controller IP_3413 Version is 0x75
[    1.616029] stb-sdhci e0635000.sdhci: SDHC/MMC controller IP_3413 found @ [feb35000] (rev 7501)
[    1.660085] mmc0: SDHCI controller on IP_3413 [e0635000.sdhci] using ADMA
[    1.668708] usbcore: registered new interface driver usbhid
[    1.674225] usbhid: USB HID core driver
[    1.678273] TCP: cubic registered
[    1.681545] NET: Registered protocol family 17
[    1.686395] Key type dns_resolver registered
[    1.690728] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
[    1.698270] ThumbEE CPU extension supported.
[    1.703673] ### dt-test ### No testcase data in device tree; not running tests
[    1.900097] ata2: SATA link down (SStatus 0 SControl 300)
[    4.513193] VFS: Mounted root (jffs2 filesystem) on device 31:0.
[    4.520035] devtmpfs: mounted
[    4.523212] Freeing unused kernel memory: 188K (80677000 - 806a6000)
init started: BusyBox v1.29.3 (2019-02-01 13:43:52 CET)
[    5.096243] NET: Registered protocol family 10
try to mount /dev/mtdblock1 to /var
starting /etc/init.d/S02loadmodules ...
Sat Jan  1 00:00:00 CET 2000
Creating device node for cs_display
Running insmod now .......
insmod: can't insert '/lib/modules/3.10.93/extra/lnxdvbciDrv.ko': No such device
Driver modules loaded, please start the app now...
Creating device node for KAL
Creating device node for notifyq
Creating device node for platform
Creating device node for content
Creating device node for standby
Creating device node for video
Creating device node for audio
Creating device node for pvr
Creating device node for cs_control
Creating device node for cs_ir
Creating device node for fb
starting /etc/init.d/S04mdev ...
[logoview] done with Timeout...
starting /etc/init.d/S05mount ...
starting /etc/init.d/S50hostname ...
starting /etc/init.d/S51networking ...
Configuring network interfaces... udhcpc: started, v1.29.3
udhcpc: sending discover
udhcpc: sending discover
udhcpc: sending discover
udhcpc: no lease, forking to background
done.
starting /etc/init.d/S52syslogd ...
Jan  1 00:00:18 CST-26BE32 syslog.info syslogd started: BusyBox v1.29.3
starting /etc/init.d/S60autofs ...
 1 Jan 00:00:18 ntpdate[1041]: ntpdate 4.2.8p6@1.3265-o (1)
Error resolving time.fu-berlin.de: Name or service not known (-2)
 1 Jan 00:00:18 ntpdate[1041]: Can't find host time.fu-berlin.de: Name or service not known (-2)
 1 Jan 00:00:18 ntpdate[1041]: no servers can be used, exiting
starting
starting /etc/init.d/S80dvdreadfs ...
starting /etc/init.d/S90inetd ...
starting /etc/init.d/S96nfsd ...
starting /etc/init.d/S9A_rescue ...
ping: sendto: Network is unreachable
ping: sendto: Network is unreachable
ping: sendto: Network is unreachable
flash_erase: error!: /dev/mtd/1
             error 2 (No such file or directory)
starting /var/etc/init.d/S9L_logomask ...
starting /var/etc/init.d/S9T_tuxcald ...
starting /var/etc/init.d/S9T_tuxmaild ...
Jan  1 00:00:20 CST-26BE32 daemon.info : starting pid 1103, tty '': '/etc/init.d/rcK'
stoping /etc/init.d/K20dvdreadfs ...
/tmp/media/DVD/ unmounted
stoping /etc/init.d/K40autofs ...
stopping
stoping /etc/init.d/K48syslogd ...
Jan  1 00:00:20 CST-26BE32 syslog.info syslogd exiting
stoping /etc/init.d/K51networking ...
Deconfiguring network interfaces... done.
stoping /etc/init.d/K96nfsd ...
stoping /etc/init.d/K99mount ...
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system halt
------------------------------
stopped at 14.10.2022 16:03:52

 

Hier der Log der Box beim Booten. So wie jetzt der Status ist,nachdem ich das Rettungsflash gemacht habe.

Wenn noch Log während der anwendung des Rettungssticks gebraucht wird, bitte melden.

Dank für Mühe

bearbeitet von birgi
Link zu diesem Kommentar
Auf anderen Seiten teilen
  • Admin
SnowHead

SnowHead

Geschrieben
  • Admin
Geschrieben

@birgi 

starting /etc/init.d/S9A_rescue ...
ping: sendto: Network is unreachable
ping: sendto: Network is unreachable
ping: sendto: Network is unreachable
flash_erase: error!: /dev/mtd/1
             error 2 (No such file or directory)

Du startest die Box ohne Netzwerk und hast das Polizeiplugin im Flashlöschmodus aktiviert. Das ist mutig. Das Plugin findet den Router nicht und versucht den Flash zu löschen. Glücklicherweise liegt /var/ bei der Trinity wohl auf einer anderen Partition als bei der Coolstream, weshalb der Flash nicht wirklich gelöscht wird (das Plugin müßte mal jemand mit einer Trinity für diese anpassen). Allerdings wird die Box dann trotzdem vom Polizei-Plugin runtergefahren. Also entweder schließt Du das Netzwerk an und hast den Router mit der im Polizei-Plugin eingetragenen MAC-Adresse noch im Netz oder Du mußt ein jungfräuliches Image über Rescue flashen und das dann neu einrichten.

Erst mal ohne Polizei-Plugin wenn Du auch zukünftig vorhast, die Box ohne Netzwerk zu starten.

Link zu diesem Kommentar
Auf anderen Seiten teilen
birgi

birgi

Geschrieben
  • Autor
Geschrieben

Hallo Snowhead, schön, dass es dich noch hier gibt.

 

Also richtig ist, dass ich diese Box als Zweitbox betrieb, nachdem ich mir vor Jahren eine Duo zugelegt hatte. Richtig ist auch, dass da mal das Polizei-Plugin drauf war und ich seither die Box auch ohne Netzwerk betrieb, weil ich an dem neuen Ort kein Netzwerk hatte und brauchte.

Richtig ist aber auch, dass die Box dort ohne Netzwerk über Jahr lief und das dann plötzlich nicht mehr.

Wie anfangs geschrieben, habe ich dann versucht mit Notfallstick und jungfräulichem Image die Box zum Leben zu erwecken, das aber ohne Erfolg.

Ich mache jetzt nochmal einen Log mit angeschlossenem Netzwerik und einer beim Versuch mit dem Notfallstick zu booten, siehe dazu dann folgenden Post.

Link zu diesem Kommentar
Auf anderen Seiten teilen
birgi

birgi

Geschrieben
  • Autor
Geschrieben
Zitat

 startet at 15.10.2022 11:13:39
------------------------------
Starting Microloader ASM built on Mar 28 2016 17:59:53...
Initializing PLLs...
Initializing Clocks..
Initializing DDR PLLs/Clocks...
Initializing DDR controller...
Initializing data section...
Initializing stack ptr...
Switching to 'C' code...
Starting Microloader C...
Chip: SHINER-IP
Found Internal Ethernet PHY on GMAC0....
Checking for Guide button press ...
GCS in ISA MODE
GCS: SFC DEVICE SETUP COMPLETE
MMC:No device found
BOX MAC OK!
BOX: Type: TRINITY Rev: 84700104
Setting up default ATAG list...
Jumping to U-Boot ...
BOOT_TIME: 722 ms since POR
(B)B[?3l[0m[44m[97m[2J[1;1H --------------------------------------------------------------------------------
| U-Boot 2009.08-00068-g69a4049 (Dec 10 2015 - 14:38:00)               CST HDx |
|------------------------------------------------------------------------------|
| Chipset information                                                          |
| Vendor: NXP       Type: Shiner-IP        Revision: M1        Fuses: 0015706B |
|------------------------------------------------------------------------------|
| Clock information                                                            |
| *** not available yet ***                                                    |
|------------------------------------------------------------------------------|
| Frontpanel information                                                       |
| Vendor: CST       Version: 5.1           Display: none                       |
|------------------------------------------------------------------------------|
| Memory configuration                                                         |
| Start    | End      | Type    | Description                                  |
|----------+----------+---------+----------------------------------------------|
| 00000000 | 0FFFFFFF | RAM     | System main memory bank #0 (256M)            |
| 20000000 | 2FFFFFFF | RAM     | System main memory bank #1 (256M)            |
| D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 (  4M /  64K x  64)      |
  0%  3%  6%  9% 12% 15% 18% 21% 24% 28% 31% 34% 37% 40% 43% 46% 49% 53% 56% 59% 62% 65% 68% 71% 74% 78% 81% 84% 87% 90% 93% 96% 99%  *** Warning - bad CRC or SFC, using default environment
| 00000000*| 1FFFFFFF*| NAND    | Toshiba NAND 512MiB 3,3V 8-bit               |
|------------------------------------------------------------------------------|
| Network configuration                                                        |
| MAC: LIP 6300                    address: 00-C5-5C-26-BE-32                  |
--------------------------------------------------------------------------------
Hit any key to stop autoboot:  3 2 1 0
SFC read: offset 0x100000, size 0x300000
  0%  0%  0%  0%  0%  0%  0%  0%  1%  1%  1%  1%  1%  1%  1%  1%  2%  2%  2%  2%  2%  2%  2%  2%  3%  3%  3%  3%  3%  3%  3%  4%  4%  4%  4%  4%  4%  4%  4%  5%  5%  5%  5%  5%  5%  5%  5%  6%  6%  6%  6%  6%  6%  6%  7%  7%  7%  7%  7%  7%  7%  7%  8%  8%  8%  8%  8%  8%  8%  8%  9%  9%  9%  9%  9%  9%  9% 10% 10% 10% 10% 10% 10% 10% 10% 11% 11% 11% 11% 11% 11% 11% 11% 12% 12% 12% 12% 12% 12% 12% 13% 13% 13% 13% 13% 13% 13% 13% 14% 14% 14% 14% 14% 14% 14% 14% 15% 15% 15% 15% 15% 15% 15% 15% 16% 16% 16% 16% 16% 16% 16% 17% 17% 17% 17% 17% 17% 17% 17% 18% 18% 18% 18% 18% 18% 18% 18% 19% 19% 19% 19% 19% 19% 19% 20% 20% 20% 20% 20% 20% 20% 20% 21% 21% 21% 21% 21% 21% 21% 21% 22% 22% 22% 22% 22% 22% 22% 23% 23% 23% 23% 23% 23% 23% 23% 24% 24% 24% 24% 24% 24% 24% 24% 25% 25% 25% 25% 25% 25% 25% 26% 26% 26% 26% 26% 26% 26% 26% 27% 27% 27% 27% 27% 27% 27% 27% 28% 28% 28% 28% 28% 28% 28% 29% 29% 29% 29% 29% 29% 29% 29% 30% 30% 30% 30% 30% 30% 30% 30% 31% 31% 31% 31% 31% 31% 31% 31% 32% 32% 32% 32% 32% 32% 32% 33% 33% 33% 33% 33% 33% 33% 33% 34% 34% 34% 34% 34% 34% 34% 34% 35% 35% 35% 35% 35% 35% 35% 36% 36% 36% 36% 36% 36% 36% 36% 37% 37% 37% 37% 37% 37% 37% 37% 38% 38% 38% 38% 38% 38% 38% 39% 39% 39% 39% 39% 39% 39% 39% 40% 40% 40% 40% 40% 40% 40% 40% 41% 41% 41% 41% 41% 41% 41% 42% 42% 42% 42% 42% 42% 42% 42% 43% 43% 43% 43% 43% 43% 43% 43% 44% 44% 44% 44% 44% 44% 44% 45% 45% 45% 45% 45% 45% 45% 45% 46% 46% 46% 46% 46% 46% 46% 46% 47% 47% 47% 47% 47% 47% 47% 47% 48% 48% 48% 48% 48% 48% 48% 49% 49% 49% 49% 49% 49% 49% 49% 50% 50% 50% 50% 50% 50% 50% 50% 51% 51% 51% 51% 51% 51% 51% 52% 52% 52% 52% 52% 52% 52% 52% 53% 53% 53% 53% 53% 53% 53% 53% 54% 54% 54% 54% 54% 54% 54% 55% 55% 55% 55% 55% 55% 55% 55% 56% 56% 56% 56% 56% 56% 56% 56% 57% 57% 57% 57% 57% 57% 57% 58% 58% 58% 58% 58% 58% 58% 58% 59% 59% 59% 59% 59% 59% 59% 59% 60% 60% 60% 60% 60% 60% 60% 61% 61% 61% 61% 61% 61% 61% 61% 62% 62% 62% 62% 62% 62% 62% 62% 63% 63% 63% 63% 63% 63% 63% 63% 64% 64% 64% 64% 64% 64% 64% 65% 65% 65% 65% 65% 65% 65% 65% 66% 66% 66% 66% 66%## Booting kernel from Legacy Image at 01000000 ...
   Image Name:   Coolstream Kernel (compressed)
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3044928 Bytes =  2.9 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Linux version 3.10.93 (image@server) (gcc version 6.3.1 20170109 (crosstool-NG 1) ) #1 SMP Wed Apr 18 11:46:15 CEST 2018
[    0.000000] CPU: ARMv7 Processor [411fc091] revision 1 (ARMv7), cr=10c53c7d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Entropic Apollo STB Platform with FDT, model: CoolStream HD2 Apollo STB
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] Early platform io descriptors mapping...
[    0.000000] PERCPU: Embedded 7 pages/cpu @8090e000 s5952 r8192 d14528 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: noinitrd console=ttyS0,115200n8 mtdparts=e0632000.flash_sfc:256k@0k(uldr),512k@256k(u-boot),128k@768k(env),128k@896k(spare),-(kernel);e0631000.flash_nand:256m@0k(root0),32m@256m(var),-(root1) root=mtd:root0 rootfstype=jffs2 rw
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 256MB 256MB = 512MB total
[    0.000000] Memory: 246968k/246968k available, 277320k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xa0800000 - 0xff000000   (1512 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
[    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
[    0.000000]       .text : 0x80008000 - 0x80676d30   (6588 kB)
[    0.000000]       .init : 0x80677000 - 0x806a6740   ( 190 kB)
[    0.000000]       .data : 0x806a8000 - 0x806e9de0   ( 264 kB)
[    0.000000]        .bss : 0x806e9de0 - 0x80705364   ( 110 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU debugfs-based tracing is enabled.
[    0.000000]     Additional per-CPU info printed with stalls.
[    0.000000]     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:388
[    0.000000] GIC CPU mask not found - kernel will fail to boot.
[    0.000000] GIC CPU mask not found - kernel will fail to boot.
[    0.000000] smp_twd: clock not found -2
[    0.000000] Unable to get timer clock. Assuming 50Mhz input clock.
[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000] stb-timer: system timer (irq = 58, rate 50000000)
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [ttyS0] enabled
[    0.250502] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
[    0.342787] pid_max: default: 32768 minimum: 301
[    0.347623] Mount-cache hash table entries: 512
[    0.354183] CPU: Testing write buffer coherency: ok
[    0.359322] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.364969] Setting up static identity map for 0x803dab08 - 0x803dab60
[    0.371527] L310 cache controller enabled
[    0.375447] l2x0: 8 ways, CACHE_ID 0x410004c4, AUX_CTRL 0x32421001, Cache size: 131072 B
[    0.384163] Brought up 1 CPUs
[    0.387042] SMP: Total of 1 processors activated (1196.85 BogoMIPS).
[    0.393368] CPU: All CPU(s) started in SVC mode.
[    0.398734] devtmpfs: initialized
[    0.409036] NET: Registered protocol family 16
[    0.414117] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.551114] GMAC0: active interface is 1
[    0.555121] ChipID=0x3 ChipRevID=0x2
[    0.558752] nx_dmac: Registered with 8 channels
[    0.588141] bio: create slab <bio-0> at 0
[    0.593598] GPIO: base febd5000 (phys e06d5000)
[    0.598239] GPIO: base feb69000 (phys e0669000)
[    0.604717] SCSI subsystem initialized
[    0.609838] usbcore: registered new interface driver usbfs
[    0.615547] usbcore: registered new interface driver hub
[    0.621259] usbcore: registered new device driver usb
[    0.626732] pps_core: LinuxPPS API ver. 1 registered
[    0.631663] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.640891] PTP clock support registered
[    0.646918] cfg80211: Calling CRDA to update world regulatory domain
[    0.654785] Switching to clocksource timer_us
[    0.679591] NET: Registered protocol family 2
[    0.684969] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.692060] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.698468] TCP: Hash tables configured (established 4096 bind 4096)
[    0.704818] TCP: reno registered
[    0.707966] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.713830] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.720361] NET: Registered protocol family 1
[    0.725134] RPC: Registered named UNIX socket transport module.
[    0.730995] RPC: Registered udp transport module.
[    0.735619] RPC: Registered tcp transport module.
[    0.740294] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.746849] PM: STB Platform power mgmt initialization.
[    0.876137] bounce pool size: 64 pages
[    0.895042] NFS: Registering the id_resolver key type
[    0.900033] Key type id_resolver registered
[    0.904226] Key type id_legacy registered
[    0.908149] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.914598] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.922867] msgmni has been set to 482
[    0.928053] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.935431] io scheduler noop registered
[    0.939256] io scheduler deadline registered
[    0.944159] io scheduler cfq registered (default)
[    0.949473] e06e2000.serial: ttyS0 at MMIO 0xe06e2000 (irq = 47) is a uart-ip3106
[    0.964659] loop: module loaded
[    0.968860] ahci-stb e0638000.sata: unable to find phy
[    0.973990] SATA: Adjusting los_lvl (rd_val=0x8a46, wr_val=0x8ae6)
[    0.980078] SATA: Adjusting rx_term_en0/1 (rd_val=0x2750275, wr_val=0x2770277)
[    0.987284] ahci-stb e0638000.sata: SSS flag set, parallel bus scan disabled
[    0.994290] ahci-stb e0638000.sata: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl platform mode
[    1.003066] ahci-stb e0638000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc sxs
[    1.014469] scsi0 : ahci_platform
[    1.018336] scsi1 : ahci_platform
[    1.022449] ata1: SATA max UDMA/133 mmio [mem 0xe0638000-0xe0638fff] port 0x100 irq 39
[    1.030336] ata2: SATA max UDMA/133 mmio [mem 0xe0638000-0xe0638fff] port 0x180 irq 39
[    1.040217] NAND device: Manufacturer ID: 0x98, Chip ID: 0xdc (Toshiba NAND 512MiB 3,3V 8-bit), 512MiB, page size: 2048, OOB size: 64
[    1.052403] Bad block table found at page 262080, version 0x01
[    1.058498] Bad block table found at page 262016, version 0x01
[    1.064587] 3 cmdlinepart partitions found on MTD device e0631000.flash_nand
[    1.071586] Creating 3 MTD partitions on "e0631000.flash_nand":
[    1.077397] 0x000000000000-0x000010000000 : "root0"
[    1.084124] 0x000010000000-0x000012000000 : "var"
[    1.090354] 0x000012000000-0x000020000000 : "root1"
[    1.098831] JEDEC ID = 0x1c3016 , Extended Device ID = 0x1c30
[    1.104659] nx_sfc e0632000.flash_sfc: en25q32 (4096 Kbytes)
[    1.110242] 5 cmdlinepart partitions found on MTD device e0632000.flash_sfc
[    1.117119] Creating 5 MTD partitions on "e0632000.flash_sfc":
[    1.122926] 0x000000000000-0x000000040000 : "uldr"
[    1.129420] 0x000000040000-0x0000000c0000 : "u-boot"
[    1.136066] 0x0000000c0000-0x0000000e0000 : "env"
[    1.142516] 0x0000000e0000-0x000000100000 : "spare"
[    1.148881] 0x000000100000-0x000000400000 : "kernel"
[    1.156239] tun: Universal TUN/TAP device driver, 1.6
[    1.161277] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.167955]     DWMAC1000
[    1.170270] stmmac - user ID: 0x25, Synopsys ID: 0x35
[    1.175238]  Ring mode enabled
[    1.178263]  DMA HW capability register supported
[    1.182769]  Enhanced/Alternate descriptors
[    1.187075]     Enabled extended descriptors
[    1.191061]  RX Checksum Offload Engine supported (type 2)
[    1.196493]  TX Checksum insertion supported
[    1.200735]  Wake-Up On Lan supported
[    1.204393]  Enable RX Mitigation via HW Watchdog Timer
[    1.225266] libphy: stmmac: probed
[    1.228582] eth0: PHY ID 0293c411 at 0 IRQ POLL (stmmac-0:00) active
[    1.234977] eth0: PHY ID 00000000 at 1 IRQ POLL (stmmac-0:01)
[    1.240634] eth0: PHY ID 00000000 at 2 IRQ POLL (stmmac-0:02)
[    1.246316] eth0: PHY ID 00000000 at 3 IRQ POLL (stmmac-0:03)
[    1.252029] eth0: PHY ID 00000000 at 4 IRQ POLL (stmmac-0:04)
[    1.257720] eth0: PHY ID 00000000 at 5 IRQ POLL (stmmac-0:05)
[    1.263435] eth0: PHY ID 00000000 at 6 IRQ POLL (stmmac-0:06)
[    1.269125] eth0: PHY ID 00000000 at 7 IRQ POLL (stmmac-0:07)
[    1.274837] eth0: PHY ID 00000000 at 8 IRQ POLL (stmmac-0:08)
[    1.280537] eth0: PHY ID 00000000 at 9 IRQ POLL (stmmac-0:09)
[    1.286232] eth0: PHY ID 00000000 at 10 IRQ POLL (stmmac-0:0a)
[    1.292028] eth0: PHY ID 00000000 at 11 IRQ POLL (stmmac-0:0b)
[    1.297809] eth0: PHY ID 00000000 at 12 IRQ POLL (stmmac-0:0c)
[    1.303606] eth0: PHY ID 00000000 at 13 IRQ POLL (stmmac-0:0d)
[    1.309387] eth0: PHY ID 00000000 at 14 IRQ POLL (stmmac-0:0e)
[    1.315183] eth0: PHY ID 00000000 at 15 IRQ POLL (stmmac-0:0f)
[    1.320972] eth0: PHY ID 00000000 at 16 IRQ POLL (stmmac-0:10)
[    1.326753] eth0: PHY ID 00000000 at 17 IRQ POLL (stmmac-0:11)
[    1.332549] eth0: PHY ID 00000000 at 18 IRQ POLL (stmmac-0:12)
[    1.338330] eth0: PHY ID 00000000 at 19 IRQ POLL (stmmac-0:13)
[    1.344127] eth0: PHY ID 00000000 at 20 IRQ POLL (stmmac-0:14)
[    1.349908] eth0: PHY ID 00000000 at 21 IRQ POLL (stmmac-0:15)
[    1.355704] eth0: PHY ID 00000000 at 22 IRQ POLL (stmmac-0:16)
[    1.361493] eth0: PHY ID 00000000 at 23 IRQ POLL (stmmac-0:17)
[    1.367275] eth0: PHY ID 00000000 at 24 IRQ POLL (stmmac-0:18)
[    1.373070] eth0: PHY ID 00000000 at 25 IRQ POLL (stmmac-0:19)
[    1.378852] eth0: PHY ID 00000000 at 26 IRQ POLL (stmmac-0:1a)
[    1.384648] eth0: PHY ID 00000000 at 27 IRQ POLL (stmmac-0:1b)
[    1.390436] eth0: PHY ID 00000000 at 28 IRQ POLL (stmmac-0:1c)
[    1.396218] eth0: PHY ID 00000000 at 29 IRQ POLL (stmmac-0:1d)
[    1.402014] eth0: PHY ID 00000000 at 30 IRQ POLL (stmmac-0:1e)
[    1.407796] eth0: PHY ID 00000000 at 31 IRQ POLL (stmmac-0:1f)
[    1.413881] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.420490] ehci-platform: EHCI generic platform driver
[    1.425721] ehci-platform e066c000.usb: EHCI Host Controller
[    1.431357] ehci-platform e066c000.usb: new USB bus registered, assigned bus number 1
[    1.439201] ehci-platform e066c000.usb: irq 93, io mem 0xe066c000
[    1.460126] ehci-platform e066c000.usb: USB 2.0 started, EHCI 1.00
[    1.466299] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.473023] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.480174] usb usb1: Product: EHCI Host Controller
[    1.484988] usb usb1: Manufacturer: Linux 3.10.93 ehci_hcd
[    1.490451] usb usb1: SerialNumber: e066c000.usb
[    1.496024] hub 1-0:1.0: USB hub found
[    1.499704] hub 1-0:1.0: 1 port detected
[    1.503868] ehci-platform e066d000.usb: EHCI Host Controller
[    1.509441] ehci-platform e066d000.usb: new USB bus registered, assigned bus number 2
[    1.517386] ehci-platform e066d000.usb: irq 94, io mem 0xe066d000
[    1.523490] ata1: SATA link down (SStatus 0 SControl 300)
[    1.540096] ehci-platform e066d000.usb: USB 2.0 started, EHCI 1.00
[    1.546248] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.552959] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.560108] usb usb2: Product: EHCI Host Controller
[    1.564933] usb usb2: Manufacturer: Linux 3.10.93 ehci_hcd
[    1.570386] usb usb2: SerialNumber: e066d000.usb
[    1.575902] hub 2-0:1.0: USB hub found
[    1.579579] hub 2-0:1.0: 1 port detected
[    1.584289] usbcore: registered new interface driver usb-storage
[    1.590734] usbcore: registered new interface driver usbserial
[    1.598060] sdhci: Secure Digital Host Controller Interface driver
[    1.604226] sdhci: Copyright(c) Pierre Ossman
[    1.608566] stb-sdhci e0635000.sdhci: SDHC/MMC controller IP_3413 Version is 0x75
[    1.616059] stb-sdhci e0635000.sdhci: SDHC/MMC controller IP_3413 found @ [feb35000] (rev 7501)
[    1.660085] mmc0: SDHCI controller on IP_3413 [e0635000.sdhci] using ADMA
[    1.668733] usbcore: registered new interface driver usbhid
[    1.674244] usbhid: USB HID core driver
[    1.678293] TCP: cubic registered
[    1.681564] NET: Registered protocol family 17
[    1.686388] Key type dns_resolver registered
[    1.690723] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
[    1.698265] ThumbEE CPU extension supported.
[    1.703669] ### dt-test ### No testcase data in device tree; not running tests
[    1.900097] ata2: SATA link down (SStatus 0 SControl 300)
[    4.511921] VFS: Mounted root (jffs2 filesystem) on device 31:0.
[    4.518764] devtmpfs: mounted
[    4.521938] Freeing unused kernel memory: 188K (80677000 - 806a6000)
init started: BusyBox v1.29.3 (2019-02-01 13:43:52 CET)
[    5.095285] NET: Registered protocol family 10
try to mount /dev/mtdblock1 to /var
starting /etc/init.d/S02loadmodules ...
Sat Jan  1 00:00:00 CET 2000
Creating device node for cs_display
Running insmod now .......
insmod: can't insert '/lib/modules/3.10.93/extra/lnxdvbciDrv.ko': No such device
Driver modules loaded, please start the app now...
Creating device node for KAL
Creating device node for notifyq
Creating device node for platform
Creating device node for content
Creating device node for standby
Creating device node for video
Creating device node for audio
Creating device node for pvr
Creating device node for cs_control
Creating device node for cs_ir
Creating device node for fb
starting /etc/init.d/S04mdev ...
[logoview] done with Timeout...
starting /etc/init.d/S05mount ...
starting /etc/init.d/S50hostname ...
starting /etc/init.d/S51networking ...
Configuring network interfaces... udhcpc: started, v1.29.3
udhcpc: sending discover
udhcpc: sending discover
udhcpc: sending discover
udhcpc: sending select for 192.168.178.135
udhcpc: lease of 192.168.178.135 obtained, lease time 864000
deleting routers
route: SIOCDELRT: No such process
adding dns 192.168.178.1
done.
starting /etc/init.d/S52syslogd ...
starting /etc/init.d/S60autofs ...
Jan  1 00:00:15 CST-26BE32 syslog.info syslogd started: BusyBox v1.29.3
 1 Jan 00:00:15 ntpdate[1044]: ntpdate 4.2.8p6@1.3265-o (1)
15 Oct 11:14:13 ntpdate[1044]: step time server 130.133.1.10 offset 719144037.386923 sec
starting
starting /etc/init.d/S80dvdreadfs ...
starting /etc/init.d/S90inetd ...
starting /etc/init.d/S96nfsd ...
starting /etc/init.d/S9A_rescue ...
flash_erase: error!: /dev/mtd/1
             error 2 (No such file or directory)
starting /var/etc/init.d/S9L_logomask ...
starting /var/etc/init.d/S9T_tuxcald ...
starting /var/etc/init.d/S9T_tuxmaild ...
Oct 15 11:14:44 CST-26BE32 daemon.info : starting pid 1110, tty '': '/etc/init.d/rcK'
stoping /etc/init.d/K20dvdreadfs ...
/tmp/media/DVD/ unmounted
stoping /etc/init.d/K40autofs ...
stopping
stoping /etc/init.d/K48syslogd ...
Oct 15 11:14:44 CST-26BE32 syslog.info syslogd exiting
stoping /etc/init.d/K51networking ...
Deconfiguring network interfaces... done.
stoping /etc/init.d/K96nfsd ...
stoping /etc/init.d/K99mount ...
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system halt
------------------------------
stopped at 15.10.2022 11:15:19

das war der log mit Netzwerkkabel angeschlossen

 

 

Zitat

startet at 15.10.2022 11:25:49
------------------------------
Starting Microloader ASM built on Mar 28 2016 17:59:53...
Initializing PLLs...
Initializing Clocks..
Initializing DDR PLLs/Clocks...
Initializing DDR controller...
Initializing data section...
Initializing stack ptr...
Switching to 'C' code...
Starting Microloader C...
Chip: SHINER-IP
Found Internal Ethernet PHY on GMAC0....
Checking for Guide button press ...
GCS in ISA MODE
GCS: SFC DEVICE SETUP COMPLETE
MMC:No device found
BOX MAC OK!
BOX: Type: TRINITY Rev: 84700104
Setting up default ATAG list...
Jumping to U-Boot ...
BOOT_TIME: 725 ms since POR
(B)B[?3l[0m[44m[97m[2J[1;1H --------------------------------------------------------------------------------
| U-Boot 2009.08-00068-g69a4049 (Dec 10 2015 - 14:38:00)               CST HDx |
|------------------------------------------------------------------------------|
| Chipset information                                                          |
| Vendor: NXP       Type: Shiner-IP        Revision: M1        Fuses: 0015706B |
|------------------------------------------------------------------------------|
| Clock information                                                            |
| *** not available yet ***                                                    |
|------------------------------------------------------------------------------|
| Frontpanel information                                                       |
| Vendor: CST       Version: 5.1           Display: none                       |
|------------------------------------------------------------------------------|
| Memory configuration                                                         |
| Start    | End      | Type    | Description                                  |
|----------+----------+---------+----------------------------------------------|
| 00000000 | 0FFFFFFF | RAM     | System main memory bank #0 (256M)            |
| 20000000 | 2FFFFFFF | RAM     | System main memory bank #1 (256M)            |
| D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 (  4M /  64K x  64)      |
  0%  3%  6%  9% 12% 15% 18% 21% 24% 28% 31% 34% 37% 40% 43% 46% 49% 53% 56% 59% 62% 65% 68% 71% 74% 78% 81% 84% 87% 90% 93% 96% 99%  *** Warning - bad CRC or SFC, using default environment
| 00000000*| 1FFFFFFF*| NAND    | Toshiba NAND 512MiB 3,3V 8-bit               |
|------------------------------------------------------------------------------|
| Network configuration                                                        |
| MAC: LIP 6300                    address: 00-C5-5C-26-BE-32                  |
--------------------------------------------------------------------------------
Hit any key to stop autoboot:  3
Emergency update from usb
(Re)start USB...
USB:   Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
reading uldr.bin
** Unable to read "uldr.bin" from usb 0:1 **
** Skipping uldr.bin **
reading u-boot.bin
** Unable to read "u-boot.bin" from usb 0:1 **
** Skipping u-boot.bin **
reading env.bin
** Unable to read "env.bin" from usb 0:1 **
** Skipping env.bin **
reading vmlinux.ub.gz
** Unable to read "vmlinux.ub.gz" from usb 0:1 **
** Skipping vmlinux.ub.gz **
reading rootfs.arm.jffs2.nand
** Unable to read "rootfs.arm.jffs2.nand" from usb 0:1 **
** Skipping rootfs.arm.jffs2.nand **
reading rootfs1.arm.jffs2.nand
** Unable to read "rootfs1.arm.jffs2.nand" from usb 0:1 **
** Skipping rootfs1.arm.jffs2.nand **
reading var.arm.jffs2.nand
** Unable to read "var.arm.jffs2.nand" from usb 0:1 **
** Skipping var.arm.jffs2.nand **
resetting ...
Starting Microloader ASM built on Mar 28 2016 17:59:53...
Initializing PLLs...
Initializing Clocks..
Initializing DDR PLLs/Clocks...
Initializing DDR controller...
Initializing data section...
Initializing stack ptr...
Switching to 'C' code...
Starting Microloader C...
Chip: SHINER-IP
Found Internal Ethernet PHY on GMAC0....
Checking for Guide button press ...
GCS in ISA MODE
GCS: SFC DEVICE SETUP COMPLETE
MMC:No device found
BOX MAC OK!
BOX: Type: TRINITY Rev: 84700104
Setting up default ATAG list...
Jumping to U-Boot ...
BOOT_TIME: 729 ms since POR
(B)B[?3l[0m[44m[97m[2J[1;1H --------------------------------------------------------------------------------
| U-Boot 2009.08-00068-g69a4049 (Dec 10 2015 - 14:38:00)               CST HDx |
|------------------------------------------------------------------------------|
| Chipset information                                                          |
| Vendor: NXP       Type: Shiner-IP        Revision: M1        Fuses: 0015706B |
|------------------------------------------------------------------------------|
| Clock information                                                            |
| *** not available yet ***                                                    |
|------------------------------------------------------------------------------|
| Frontpanel information                                                       |
| Vendor: CST       Version: 5.1           Display: none                       |
|------------------------------------------------------------------------------|
| Memory configuration                                                         |
| Start    | End      | Type    | Description                                  |
|----------+----------+---------+----------------------------------------------|
| 00000000 | 0FFFFFFF | RAM     | System main memory bank #0 (256M)            |
| 20000000 | 2FFFFFFF | RAM     | System main memory bank #1 (256M)            |
| D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 (  4M /  64K x  64)      |
  0%  3%  6%  9% 12% 15% 18% 21% 24% 28% 31% 34% 37% 40% 43% 46% 49% 53% 56% 59% 62% 65% 68% 71% 74% 78% 81% 84% 87% 90% 93% 96% 99%  *** Warning - bad CRC or SFC, using default environment
| 00000000*| 1FFFFFFF*| NAND    | Toshiba NAND 512MiB 3,3V 8-bit               |
|------------------------------------------------------------------------------|
| Network configuration                                                        |
| MAC: LIP 6300                    address: 00-C5-5C-26-BE-32                  |
--------------------------------------------------------------------------------
Hit any key to stop autoboot:  3 2 1 0
SFC read: offset 0x100000, size 0x300000
  0%  0%  0%  0%  0%  0%  0%  0%  1%  1%  1%  1%  1%  1%  1%  1%  2%  2%  2%  2%  2%  2%  2%  2%  3%  3%  3%  3%  3%  3%  3%  4%  4%  4%  4%  4%  4%  4%  4%  5%  5%  5%  5%  5%  5%  5%  5%  6%  6%  6%  6%  6%  6%  6%  7%  7%  7%  7%  7%  7%  7%  7%  8%  8%  8%  8%  8%  8%  8%  8%  9%  9%  9%  9%  9%  9%  9% 10% 10% 10% 10% 10% 10% 10% 10% 11% 11% 11% 11% 11% 11% 11% 11% 12% 12% 12% 12% 12% 12% 12% 13% 13% 13% 13% 13% 13% 13% 13% 14% 14% 14% 14% 14% 14% 14% 14% 15% 15% 15% 15% 15% 15% 15% 15% 16% 16% 16% 16% 16% 16% 16% 17% 17% 17% 17% 17% 17% 17% 17% 18% 18% 18% 18% 18% 18% 18% 18% 19% 19% 19% 19% 19% 19% 19% 20% 20% 20% 20% 20% 20% 20% 20% 21% 21% 21% 21% 21% 21% 21% 21% 22% 22% 22% 22% 22% 22% 22% 23% 23% 23% 23% 23% 23% 23% 23% 24% 24% 24% 24% 24% 24% 24% 24% 25% 25% 25% 25% 25% 25% 25% 26% 26% 26% 26% 26% 26% 26% 26% 27% 27% 27% 27% 27% 27% 27% 27% 28% 28% 28% 28% 28% 28% 28% 29% 29% 29% 29% 29% 29% 29% 29% 30% 30% 30% 30% 30% 30% 30% 30% 31% 31% 31% 31% 31% 31% 31% 31% 32% 32% 32% 32% 32% 32% 32% 33% 33% 33% 33% 33% 33% 33% 33% 34% 34% 34% 34% 34% 34% 34% 34% 35% 35% 35% 35% 35% 35% 35% 36% 36% 36% 36% 36% 36% 36% 36% 37% 37% 37% 37% 37% 37% 37% 37% 38% 38% 38% 38% 38% 38% 38% 39% 39% 39% 39% 39% 39% 39% 39% 40% 40% 40% 40% 40% 40% 40% 40% 41% 41% 41% 41% 41% 41% 41% 42% 42% 42% 42% 42% 42% 42% 42% 43% 43% 43% 43% 43% 43% 43% 43% 44% 44% 44% 44% 44% 44% 44% 45% 45% 45% 45% 45% 45% 45% 45% 46% 46% 46% 46% 46% 46% 46% 46% 47% 47% 47% 47% 47% 47% 47% 47% 48% 48% 48% 48% 48% 48% 48% 49% 49% 49% 49% 49% 49% 49% 49% 50% 50% 50% 50% 50% 50% 50% 50% 51% 51% 51% 51% 51% 51% 51% 52% 52% 52% 52% 52% 52% 52% 52% 53% 53% 53% 53% 53% 53% 53% 53% 54% 54% 54% 54% 54% 54% 54% 55% 55% 55% 55% 55% 55% 55% 55% 56% 56% 56% 56% 56% 56% 56% 56% 57% 57% 57% 57% 57% 57% 57% 58% 58% 58% 58% 58% 58% 58% 58% 59% 59% 59% 59% 59% 59% 59% 59% 60% 60% 60% 60% 60% 60% 60% 61% 61% 61% 61% 61% 61% 61% 61% 62% 62% 62% 62% 62% 62% 62% 62% 63% 63% 63% 63% 63% 63% 63% 63% 64% 64% 64% 64% 64% 64% 64% 65% 65% 65% 65% 65% 65% 65% 65% 66% 66% 66% 66% 66% 66## Booting kernel from Legacy Image at 01000000 ...
   Image Name:   Coolstream Kernel (compressed)
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3044928 Bytes =  2.9 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Linux version 3.10.93 (image@server) (gcc version 6.3.1 20170109 (crosstool-NG 1) ) #1 SMP Wed Apr 18 11:46:15 CEST 2018
[    0.000000] CPU: ARMv7 Processor [411fc091] revision 1 (ARMv7), cr=10c53c7d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Entropic Apollo STB Platform with FDT, model: CoolStream HD2 Apollo STB
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] Early platform io descriptors mapping...
[    0.000000] PERCPU: Embedded 7 pages/cpu @8090e000 s5952 r8192 d14528 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: noinitrd console=ttyS0,115200n8 mtdparts=e0632000.flash_sfc:256k@0k(uldr),512k@256k(u-boot),128k@768k(env),128k@896k(spare),-(kernel);e0631000.flash_nand:256m@0k(root0),32m@256m(var),-(root1) root=mtd:root0 rootfstype=jffs2 rw
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 256MB 256MB = 512MB total
[    0.000000] Memory: 246968k/246968k available, 277320k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xa0800000 - 0xff000000   (1512 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
[    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
[    0.000000]       .text : 0x80008000 - 0x80676d30   (6588 kB)
[    0.000000]       .init : 0x80677000 - 0x806a6740   ( 190 kB)
[    0.000000]       .data : 0x806a8000 - 0x806e9de0   ( 264 kB)
[    0.000000]        .bss : 0x806e9de0 - 0x80705364   ( 110 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU debugfs-based tracing is enabled.
[    0.000000]     Additional per-CPU info printed with stalls.
[    0.000000]     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:388
[    0.000000] GIC CPU mask not found - kernel will fail to boot.
[    0.000000] GIC CPU mask not found - kernel will fail to boot.
[    0.000000] smp_twd: clock not found -2
[    0.000000] Unable to get timer clock. Assuming 50Mhz input clock.
[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000] stb-timer: system timer (irq = 58, rate 50000000)
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [ttyS0] enabled
[    0.250498] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
[    0.342783] pid_max: default: 32768 minimum: 301
[    0.347620] Mount-cache hash table entries: 512
[    0.354180] CPU: Testing write buffer coherency: ok
[    0.359317] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.364964] Setting up static identity map for 0x803dab08 - 0x803dab60
[    0.371513] L310 cache controller enabled
[    0.375434] l2x0: 8 ways, CACHE_ID 0x410004c4, AUX_CTRL 0x32421001, Cache size: 131072 B
[    0.384143] Brought up 1 CPUs
[    0.387020] SMP: Total of 1 processors activated (1196.85 BogoMIPS).
[    0.393346] CPU: All CPU(s) started in SVC mode.
[    0.398709] devtmpfs: initialized
[    0.409001] NET: Registered protocol family 16
[    0.414088] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.551076] GMAC0: active interface is 1
[    0.555079] ChipID=0x3 ChipRevID=0x2
[    0.558702] nx_dmac: Registered with 8 channels
[    0.588020] bio: create slab <bio-0> at 0
[    0.593462] GPIO: base febd5000 (phys e06d5000)
[    0.598097] GPIO: base feb69000 (phys e0669000)
[    0.604557] SCSI subsystem initialized
[    0.609685] usbcore: registered new interface driver usbfs
[    0.615396] usbcore: registered new interface driver hub
[    0.621110] usbcore: registered new device driver usb
[    0.626590] pps_core: LinuxPPS API ver. 1 registered
[    0.631519] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.640753] PTP clock support registered
[    0.646784] cfg80211: Calling CRDA to update world regulatory domain
[    0.654655] Switching to clocksource timer_us
[    0.679364] NET: Registered protocol family 2
[    0.684618] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.691694] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.698100] TCP: Hash tables configured (established 4096 bind 4096)
[    0.704421] TCP: reno registered
[    0.707562] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.713406] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.719847] NET: Registered protocol family 1
[    0.724504] RPC: Registered named UNIX socket transport module.
[    0.730399] RPC: Registered udp transport module.
[    0.735000] RPC: Registered tcp transport module.
[    0.739667] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.746261] PM: STB Platform power mgmt initialization.
[    0.876053] bounce pool size: 64 pages
[    0.894965] NFS: Registering the id_resolver key type
[    0.899974] Key type id_resolver registered
[    0.904141] Key type id_legacy registered
[    0.908067] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.914514] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.922773] msgmni has been set to 482
[    0.927966] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.935341] io scheduler noop registered
[    0.939165] io scheduler deadline registered
[    0.944071] io scheduler cfq registered (default)
[    0.949377] e06e2000.serial: ttyS0 at MMIO 0xe06e2000 (irq = 47) is a uart-ip3106
[    0.964528] loop: module loaded
[    0.968721] ahci-stb e0638000.sata: unable to find phy
[    0.973846] SATA: Adjusting los_lvl (rd_val=0x8a46, wr_val=0x8ae6)
[    0.979912] SATA: Adjusting rx_term_en0/1 (rd_val=0x2750275, wr_val=0x2770277)
[    0.987149] ahci-stb e0638000.sata: SSS flag set, parallel bus scan disabled
[    0.994137] ahci-stb e0638000.sata: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl platform mode
[    1.002916] ahci-stb e0638000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc sxs
[    1.014309] scsi0 : ahci_platform
[    1.018187] scsi1 : ahci_platform
[    1.022287] ata1: SATA max UDMA/133 mmio [mem 0xe0638000-0xe0638fff] port 0x100 irq 39
[    1.030173] ata2: SATA max UDMA/133 mmio [mem 0xe0638000-0xe0638fff] port 0x180 irq 39
[    1.039964] NAND device: Manufacturer ID: 0x98, Chip ID: 0xdc (Toshiba NAND 512MiB 3,3V 8-bit), 512MiB, page size: 2048, OOB size: 64
[    1.052207] Bad block table found at page 262080, version 0x01
[    1.058305] Bad block table found at page 262016, version 0x01
[    1.064407] 3 cmdlinepart partitions found on MTD device e0631000.flash_nand
[    1.071370] Creating 3 MTD partitions on "e0631000.flash_nand":
[    1.077221] 0x000000000000-0x000010000000 : "root0"
[    1.083950] 0x000010000000-0x000012000000 : "var"
[    1.090164] 0x000012000000-0x000020000000 : "root1"
[    1.098648] JEDEC ID = 0x1c3016 , Extended Device ID = 0x1c30
[    1.104465] nx_sfc e0632000.flash_sfc: en25q32 (4096 Kbytes)
[    1.110031] 5 cmdlinepart partitions found on MTD device e0632000.flash_sfc
[    1.116943] Creating 5 MTD partitions on "e0632000.flash_sfc":
[    1.122729] 0x000000000000-0x000000040000 : "uldr"
[    1.129201] 0x000000040000-0x0000000c0000 : "u-boot"
[    1.135748] 0x0000000c0000-0x0000000e0000 : "env"
[    1.142262] 0x0000000e0000-0x000000100000 : "spare"
[    1.148630] 0x000000100000-0x000000400000 : "kernel"
[    1.155983] tun: Universal TUN/TAP device driver, 1.6
[    1.161020] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.167694]     DWMAC1000
[    1.169966] stmmac - user ID: 0x25, Synopsys ID: 0x35
[    1.175016]  Ring mode enabled
[    1.178000]  DMA HW capability register supported
[    1.182503]  Enhanced/Alternate descriptors
[    1.186811]     Enabled extended descriptors
[    1.190798]  RX Checksum Offload Engine supported (type 2)
[    1.196229]  TX Checksum insertion supported
[    1.200471]  Wake-Up On Lan supported
[    1.204128]  Enable RX Mitigation via HW Watchdog Timer
[    1.225087] libphy: stmmac: probed
[    1.228404] eth0: PHY ID 0293c411 at 0 IRQ POLL (stmmac-0:00) active
[    1.234782] eth0: PHY ID 00000000 at 1 IRQ POLL (stmmac-0:01)
[    1.240433] eth0: PHY ID 00000000 at 2 IRQ POLL (stmmac-0:02)
[    1.246121] eth0: PHY ID 00000000 at 3 IRQ POLL (stmmac-0:03)
[    1.251833] eth0: PHY ID 00000000 at 4 IRQ POLL (stmmac-0:04)
[    1.257525] eth0: PHY ID 00000000 at 5 IRQ POLL (stmmac-0:05)
[    1.263236] eth0: PHY ID 00000000 at 6 IRQ POLL (stmmac-0:06)
[    1.268930] eth0: PHY ID 00000000 at 7 IRQ POLL (stmmac-0:07)
[    1.274643] eth0: PHY ID 00000000 at 8 IRQ POLL (stmmac-0:08)
[    1.280346] eth0: PHY ID 00000000 at 9 IRQ POLL (stmmac-0:09)
[    1.286037] eth0: PHY ID 00000000 at 10 IRQ POLL (stmmac-0:0a)
[    1.291833] eth0: PHY ID 00000000 at 11 IRQ POLL (stmmac-0:0b)
[    1.297615] eth0: PHY ID 00000000 at 12 IRQ POLL (stmmac-0:0c)
[    1.303411] eth0: PHY ID 00000000 at 13 IRQ POLL (stmmac-0:0d)
[    1.309192] eth0: PHY ID 00000000 at 14 IRQ POLL (stmmac-0:0e)
[    1.314989] eth0: PHY ID 00000000 at 15 IRQ POLL (stmmac-0:0f)
[    1.320777] eth0: PHY ID 00000000 at 16 IRQ POLL (stmmac-0:10)
[    1.326558] eth0: PHY ID 00000000 at 17 IRQ POLL (stmmac-0:11)
[    1.332355] eth0: PHY ID 00000000 at 18 IRQ POLL (stmmac-0:12)
[    1.338136] eth0: PHY ID 00000000 at 19 IRQ POLL (stmmac-0:13)
[    1.343933] eth0: PHY ID 00000000 at 20 IRQ POLL (stmmac-0:14)
[    1.349714] eth0: PHY ID 00000000 at 21 IRQ POLL (stmmac-0:15)
[    1.355510] eth0: PHY ID 00000000 at 22 IRQ POLL (stmmac-0:16)
[    1.361298] eth0: PHY ID 00000000 at 23 IRQ POLL (stmmac-0:17)
[    1.367080] eth0: PHY ID 00000000 at 24 IRQ POLL (stmmac-0:18)
[    1.372876] eth0: PHY ID 00000000 at 25 IRQ POLL (stmmac-0:19)
[    1.378658] eth0: PHY ID 00000000 at 26 IRQ POLL (stmmac-0:1a)
[    1.384454] eth0: PHY ID 00000000 at 27 IRQ POLL (stmmac-0:1b)
[    1.390242] eth0: PHY ID 00000000 at 28 IRQ POLL (stmmac-0:1c)
[    1.396023] eth0: PHY ID 00000000 at 29 IRQ POLL (stmmac-0:1d)
[    1.401820] eth0: PHY ID 00000000 at 30 IRQ POLL (stmmac-0:1e)
[    1.407601] eth0: PHY ID 00000000 at 31 IRQ POLL (stmmac-0:1f)
[    1.413676] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.420295] ehci-platform: EHCI generic platform driver
[    1.425523] ehci-platform e066c000.usb: EHCI Host Controller
[    1.431160] ehci-platform e066c000.usb: new USB bus registered, assigned bus number 1
[    1.438996] ehci-platform e066c000.usb: irq 93, io mem 0xe066c000
[    1.460128] ehci-platform e066c000.usb: USB 2.0 started, EHCI 1.00
[    1.466304] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.473027] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.480178] usb usb1: Product: EHCI Host Controller
[    1.484991] usb usb1: Manufacturer: Linux 3.10.93 ehci_hcd
[    1.490456] usb usb1: SerialNumber: e066c000.usb
[    1.496021] hub 1-0:1.0: USB hub found
[    1.499700] hub 1-0:1.0: 1 port detected
[    1.503868] ehci-platform e066d000.usb: EHCI Host Controller
[    1.509446] ehci-platform e066d000.usb: new USB bus registered, assigned bus number 2
[    1.517393] ehci-platform e066d000.usb: irq 94, io mem 0xe066d000
[    1.523496] ata1: SATA link down (SStatus 0 SControl 300)
[    1.540093] ehci-platform e066d000.usb: USB 2.0 started, EHCI 1.00
[    1.546253] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.552964] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.560113] usb usb2: Product: EHCI Host Controller
[    1.564938] usb usb2: Manufacturer: Linux 3.10.93 ehci_hcd
[    1.570391] usb usb2: SerialNumber: e066d000.usb
[    1.575909] hub 2-0:1.0: USB hub found
[    1.579583] hub 2-0:1.0: 1 port detected
[    1.584299] usbcore: registered new interface driver usb-storage
[    1.590738] usbcore: registered new interface driver usbserial
[    1.598049] sdhci: Secure Digital Host Controller Interface driver
[    1.604214] sdhci: Copyright(c) Pierre Ossman
[    1.608552] stb-sdhci e0635000.sdhci: SDHC/MMC controller IP_3413 Version is 0x75
[    1.616047] stb-sdhci e0635000.sdhci: SDHC/MMC controller IP_3413 found @ [feb35000] (rev 7501)
[    1.660084] mmc0: SDHCI controller on IP_3413 [e0635000.sdhci] using ADMA
[    1.668710] usbcore: registered new interface driver usbhid
[    1.674223] usbhid: USB HID core driver
[    1.678268] TCP: cubic registered
[    1.681542] NET: Registered protocol family 17
[    1.686371] Key type dns_resolver registered
[    1.690698] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
[    1.698234] ThumbEE CPU extension supported.
[    1.703627] ### dt-test ### No testcase data in device tree; not running tests
[    1.900094] ata2: SATA link down (SStatus 0 SControl 300)
[    2.930093] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    3.081245] usb 1-1: New USB device found, idVendor=0781, idProduct=5567
[    3.087858] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.094952] usb 1-1: Product: Cruzer Blade
[    3.098988] usb 1-1: Manufacturer: SanDisk
[    3.103058] usb 1-1: SerialNumber: 4C530000160919110421
[    3.109567] usb-storage 1-1:1.0: USB Mass Storage device detected
[    3.115860] scsi2 : usb-storage 1-1:1.0
[    4.121512] scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer Blade     1.00 PQ: 0 ANSI: 6
[    4.132200] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    4.137980] sd 2:0:0:0: [sda] 60088320 512-byte logical blocks: (30.7 GB/28.6 GiB)
[    4.146963] sd 2:0:0:0: [sda] Write Protect is off
[    4.152559] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    4.216579]  sda: sda1
[    4.223532] sd 2:0:0:0: [sda] Attached SCSI removable disk
[    4.604848] VFS: Mounted root (jffs2 filesystem) on device 31:0.
[    4.611734] devtmpfs: mounted
[    4.614870] Freeing unused kernel memory: 188K (80677000 - 806a6000)
init started: BusyBox v1.29.3 (2019-02-01 13:43:52 CET)
[    5.188229] NET: Registered protocol family 10
try to mount /dev/mtdblock1 to /var
starting /etc/init.d/S02loadmodules ...
Sat Jan  1 00:00:00 CET 2000
Creating device node for cs_display
Running insmod now .......
insmod: can't insert '/lib/modules/3.10.93/extra/lnxdvbciDrv.ko': No such device
Driver modules loaded, please start the app now...
Creating device node for KAL
Creating device node for notifyq
Creating device node for platform
Creating device node for content
Creating device node for standby
Creating device node for video
Creating device node for audio
Creating device node for pvr
Creating device node for cs_control
Creating device node for cs_ir
Creating device node for fb
starting /etc/init.d/S04mdev ...
[logoview] done with Timeout...
error connect socket /tmp/neutrino.sock: No such file or directory
starting /etc/init.d/S05mount ...
starting /etc/init.d/S50hostname ...
starting /etc/init.d/S51networking ...
Configuring network interfaces... udhcpc: started, v1.29.3
udhcpc: sending discover
udhcpc: sending discover
udhcpc: sending discover
udhcpc: sending select for 192.168.178.135
udhcpc: lease of 192.168.178.135 obtained, lease time 864000
deleting routers
route: SIOCDELRT: No such process
adding dns 192.168.178.1
done.
starting /etc/init.d/S52syslogd ...
starting /etc/init.d/S60autofs ...
Jan  1 00:00:16 CST-26BE32 syslog.info syslogd started: BusyBox v1.29.3
 1 Jan 00:00:17 ntpdate[1185]: ntpdate 4.2.8p6@1.3265-o (1)
15 Oct 11:26:37 ntpdate[1185]: step time server 130.133.1.10 offset 719144780.122834 sec
starting
starting /etc/init.d/S80dvdreadfs ...
starting /etc/init.d/S90inetd ...
starting /etc/init.d/S96nfsd ...
starting /etc/init.d/S9A_rescue ...
flash_erase: error!: /dev/mtd/1
             error 2 (No such file or directory)
starting /var/etc/init.d/S9L_logomask ...
starting /var/etc/init.d/S9T_tuxcald ...
starting /var/etc/init.d/S9T_tuxmaild ...
Oct 15 11:27:08 CST-26BE32 daemon.info : starting pid 1251, tty '': '/etc/init.d/rcK'
stoping /etc/init.d/K20dvdreadfs ...
/tmp/media/DVD/ unmounted
stoping /etc/init.d/K40autofs ...
stopping
stoping /etc/init.d/K48syslogd ...
Oct 15 11:27:08 CST-26BE32 syslog.info syslogd exiting
stoping /etc/init.d/K51networking ...
Deconfiguring network interfaces... done.
stoping /etc/init.d/K96nfsd ...
stoping /etc/init.d/K99mount ...
/dev/sda:
 issuing standby command
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system halt
------------------------------
stopped at 15.10.2022 11:27:41

und das der Log beim Rettungsversuch mit dem Notfallstick

Link zu diesem Kommentar
Auf anderen Seiten teilen
  • Admin
SnowHead

SnowHead

Geschrieben
  • Admin
Geschrieben

@birgi

 

Auch mit angeschlossenem Netzwerk findet das Polizei-Plugin den Router mit der damals eingetragenen MAC-Adresse nicht und fährt  die Box nach dem fehlgeschlagenen Löschversuch runter.

Beim Booten mit 32GB-Stick wird dieser zwar erkannt:

  

[    2.930093] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    3.081245] usb 1-1: New USB device found, idVendor=0781, idProduct=5567
[    3.087858] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.094952] usb 1-1: Product: Cruzer Blade
[    3.098988] usb 1-1: Manufacturer: SanDisk
[    3.103058] usb 1-1: SerialNumber: 4C530000160919110421
[    3.109567] usb-storage 1-1:1.0: USB Mass Storage device detected
[    3.115860] scsi2 : usb-storage 1-1:1.0
[    4.121512] scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer Blade     1.00 PQ: 0 ANSI: 6
[    4.132200] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    4.137980] sd 2:0:0:0: [sda] 60088320 512-byte logical blocks: (30.7 GB/28.6 GiB)
[    4.146963] sd 2:0:0:0: [sda] Write Protect is off
[    4.152559] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    4.216579]  sda: sda1

 

aber kein mountbares Dateisystem gefunden und deshalb ganz normal weitergebootet. Versuche das bitte mal mit einem anderen, kleineren Stick, welcher entsprechend Anleitung mit einem jungfräulichen Image ausgestattet wurde.

Link zu diesem Kommentar
Auf anderen Seiten teilen
birgi

birgi

Geschrieben
  • Autor
Geschrieben

PROBLEM GELÖST!!!

 

Es lag wohl an dem Stick. Noch 2 weitere Sticks versucht, alle waren FAT32 formatiert und das Image war eine Jungfrau. Erst beim 3. Stick bootete er, so dass man die Box wieder nutzen kann. Der 3. war übrigens ein 64GB Stick , die anderen 2 einiges kleiner.

 

Der Himmel weiss nur, wie das Ganze passieren konnte. Ich habe da nur einen Verdacht. Die beiden Trinity Receiver Shiner und Duo stehen recht nahe beieinander. Da kommt es manchmal zu fälschlicher Eingabe bei jeweils der anderen Box. Dass dabei etwas passiert ist ???

Hier noch eine Frage. Da wird man wohl nichts machen können, die IR-Bedienung unterschiedlich zu machen?

Link zu diesem Kommentar
Auf anderen Seiten teilen
Don de Deckelwech

Don de Deckelwech

Geschrieben
Geschrieben

Hi,

Zitat

Hier noch eine Frage. Da wird man wohl nichts machen können, die IR-Bedienung unterschiedlich zu machen?

nicht wirklich, alle Coolies sprechen dasselbe IR-Protokoll.

Es gibt 2 Möglichkeiten, beide eher schlecht: die Coolies können auch eine alte dBox2-FB nutzen, da gabs aber mehrere Modelle und die Coolies sprechen nur eine bestimmte alte Nokia-FB, zudem fehlen dort etliche Tasten im Vergleich zur Coolie-FB.

 

Früher zu dBox2-Zeiten gabs mal ein Plugin, welches die FB der Boxen jeweils wechselseitig gesperrt hatte, ob das jemals für die Coolies angepasst wurde, weiss ich nicht. Das hiess iirc "mytwobox".

 

Ciao,

DdD.

 

PS: nen Postit vor den IR-Empfänger der nicht so wichtigen Box zu kleben, dürfte einfacher sein. :)

  • Like 1
Link zu diesem Kommentar
Auf anderen Seiten teilen
 Share
Gehe zur Themenübersicht

  • Wer ist Online   0 Benutzer

    • Keine registrierten Benutzer online.
×
×
  • Neu erstellen...