falp Geschrieben 8. März 2021 Melden Share Geschrieben 8. März 2021 Hallo, ich habe in einem Fall von geistiger Umnachtung das falsche Image auf meine CST Trinity Duo geflasht. Leider ist es mir nirgends gelungen die erforderlichen Dateien zum Emergency Flash über USB-Stick zu finden. Kann mir jemand helfen? Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
derdernixweiß Geschrieben 9. März 2021 Melden Share Geschrieben 9. März 2021 Kommst du noch auf die Box? Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
falp Geschrieben 9. März 2021 Autor Melden Share Geschrieben 9. März 2021 Nein! Die box startet nach dem Flashen nicht mehr. Ich würde mir gern einen USB-Stick mit den notwendigen Dateien für einen Emergency-Flash erstellen. Dazu fehlen mir leider die notwendigen Dateien wie Kernel und Image. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
derdernixweiß Geschrieben 9. März 2021 Melden Share Geschrieben 9. März 2021 (bearbeitet) Finde ich hier nicht...evtl zu blöd Kannst sonst im Coolstream.to Forum entsprechende recovery-Dateien runterladen http://www.coolstream.to/index.php?page=Thread&threadID=17611 bearbeitet 9. März 2021 von derdernixweiß Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Admin Gandalf Geschrieben 9. März 2021 Admin Melden Share Geschrieben 9. März 2021 Anhang entpacken und die 3 Dateien auf einen USB packen, direkt ins root, kein Unterordner. Der Stick muss FAT32 formatiert sein. Box ausschalten, Stick vorn rein, einschalten und die Powertaste der Fernbedienung mehrfach hintereinander betätigen.kernel_und_env.bin (2).zip Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
falp Geschrieben 9. März 2021 Autor Melden Share Geschrieben 9. März 2021 Danke für die Antworten! Im Anhang befinden sich zwei Dateien. (env.bin und vmlinux.ub.gz) Fehlt da eventuell noch etwas? Die Box blinkt grün, leuchtet dann gelb/rot und die LED am USB-Stick blinkt kurzzeitig. Dann gehen alle LED aus und nichts passiert. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Admin Gandalf Geschrieben 10. März 2021 Admin Melden Share Geschrieben 10. März 2021 vor 14 Stunden schrieb falp: Fehlt da eventuell noch etwas? Klar fehlt da was, denn ein Image wird auch gebraucht...... Umbenennen in rootfs.arm.jffs2.nand und auf den Stick kopieren. Mit ein wenig Eigeninitiative findet sich alles. 1353908612_CST_302_Beta_LinkTrinityDUO.rar Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
falp Geschrieben 10. März 2021 Autor Melden Share Geschrieben 10. März 2021 vor 3 Stunden schrieb Gandalf: Klar fehlt da was, denn ein Image wird auch gebraucht...... Umbenennen in rootfs.arm.jffs2.nand und auf den Stick kopieren. Mit ein wenig Eigeninitiative findet sich alles. 1353908612_CST_302_Beta_LinkTrinityDUO.rar 34 MB · 0 downloads Danke für die Hilfe! Genau so habe ich es getan. Leider funktioniert es nicht. Der Flashprozess scheint auch zu starten, die LED am USB-Stick blinkt für ca. 5 Sekunden heftig, dann geht sie aus. Die LED an der Box leuchtet dabei manchmal rot, bei einem erneuten Versuch wieder gelb/rot. Nachdem die LED am USB-Stick erloschen ist, blinkt die LED der Box zweimal grün und geht dann aus. Anscheinend ist da noch mehr defekt. Ich werde jetzt mittels Nullmodemkabel versuchen, den Fehler weiter einzugrenzen. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
falp Geschrieben 10. März 2021 Autor Melden Share Geschrieben 10. März 2021 Ich habe einige Logs nachzureichen. Vielleicht kann ja jemand daraus die Ursache erkennen. Spoiler normales bootlog: =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2021.03.10 09:53:43 =~=~=~=~=~=~=~=~=~=~=~= Starting Microloader ASM built on Mar 28 2016 18:03:24... Initializing PLLs... Initializing Clocks.. Initializing DDR PLLs/Clocks... Initializing DDR controller... Initializing data section... Initializing stack ptr... Switching to 'C' code... Starting Microloader C... Chip: KRONOS Found Internal MYSTI110 PHY on GMAC0 Checking for Guide button press ... GCS in ISA MODE GCS: SFC DEVICE SETUP COMPLETE BOX MAC OK! BOX: Type: TRINITY V2 Rev: 7530C100 Setting up default ATAG list... Jumping to U-Boot ... BOOT_TIME: 579 ms since POR -------------------------------------------------------------------------------- | U-Boot 2009.08-00068-g69a4049 (Dec 10 2015 - 14:51:59) CST HDx | |------------------------------------------------------------------------------| | Chipset information | | Vendor: Entropic Type: KRONOS Revision: B0 Fuses: 00010001 | |------------------------------------------------------------------------------| | Clock information | | *** not available yet *** | |------------------------------------------------------------------------------| | Frontpanel information | | Vendor: CST Version: 5.1 Display: none | |------------------------------------------------------------------------------| | Memory configuration | | Start | End | Type | Description | |----------+----------+---------+----------------------------------------------| | 00000000 | 1FFFFFFF | RAM | System main memory bank #0 (512M) | | D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 ( 4M / 64K x 64) | *** Warning - bad CRC or SFC, using default environment | 00000000*| 07FFFFFF*| NAND | Toshiba NAND 128MiB 3,3V 8-bit | |------------------------------------------------------------------------------| | Network configuration | | MAC: LIP 6300 address: 00-xx-xx-xx-xx-xx | -------------------------------------------------------------------------------- Hit any key to stop autoboot: 0 SFC read: e0631000.flash_nand: partitioning exceeds flash size 'kernel' is not a number Wrong Image Format for bootm command ERROR: can't get kernel image! CST HD2 # und ein Log vom Flashen per USB-Stick: Spoiler emergecy flash bootlog: =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2021.03.10 10:17:43 =~=~=~=~=~=~=~=~=~=~=~= Starting Microloader ASM built on Mar 28 2016 18:03:24... Initializing PLLs... Initializing Clocks.. Initializing DDR PLLs/Clocks... Initializing DDR controller... Initializing data section... Initializing stack ptr... Switching to 'C' code... Starting Microloader C... Chip: KRONOS Found Internal MYSTI110 PHY on GMAC0 Checking for Guide button press ... GCS in ISA MODE GCS: SFC DEVICE SETUP COMPLETE BOX MAC OK! BOX: Type: TRINITY V2 Rev: 7530C100 Setting up default ATAG list... Jumping to U-Boot ... BOOT_TIME: 579 ms since POR -------------------------------------------------------------------------------- | U-Boot 2009.08-00068-g69a4049 (Dec 10 2015 - 14:51:59) CST HDx | |------------------------------------------------------------------------------| | Chipset information | | Vendor: Entropic Type: KRONOS Revision: B0 Fuses: 00010001 | |------------------------------------------------------------------------------| | Clock information | | *** not available yet *** | |------------------------------------------------------------------------------| | Frontpanel information | | Vendor: CST Version: 5.1 Display: none | |------------------------------------------------------------------------------| | Memory configuration | | Start | End | Type | Description | |----------+----------+---------+----------------------------------------------| | 00000000 | 1FFFFFFF | RAM | System main memory bank #0 (512M) | | D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 ( 4M / 64K x 64) | *** Warning - bad CRC or SFC, using default environment | 00000000*| 07FFFFFF*| NAND | Toshiba NAND 128MiB 3,3V 8-bit | |------------------------------------------------------------------------------| | Network configuration | | MAC: LIP 6300 address: 00-xx-xx-xx-xx-xx | -------------------------------------------------------------------------------- Hit any key to stop autoboot: 1 Emergency update from usb (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found reading uldr.bin 50072 bytes read SFC erase: e0631000.flash_nand: partitioning exceeds flash size 'uldr' is not a number ** Error erasing SFC for uldr ** reading u-boot.bin 348380 bytes read SFC erase: e0631000.flash_nand: partitioning exceeds flash size 'u-boot' is not a number ** Error erasing SFC for u-boot ** reading env.bin 0 bytes read SFC erase: e0631000.flash_nand: partitioning exceeds flash size 'env' is not a number ** Error erasing SFC for env ** reading vmlinux.ub.gz 2946021 bytes read SFC erase: e0631000.flash_nand: partitioning exceeds flash size 'kernel' is not a number ** Error erasing SFC for vmlinux.ub.gz ** reading rootfs.arm.jffs2.nand 38902024 bytes read NAND erase: e0631000.flash_nand: partitioning exceeds flash size 'root0' is not a number ** Error erasing NAND for rootfs.arm.jffs2.nand ** reading rootfs1.arm.jffs2.nand ** Unable to read "rootfs1.arm.jffs2.nand" from usb 0:1 ** ** Skipping rootfs1.arm.jffs2.nand ** reading var.arm.jffs2.nand ** Unable to read "var.arm.jffs2.nand" from usb 0:1 ** ** Skipping var.arm.jffs2.nand ** resetting ... Starting Microloader ASM built on Mar 28 2016 18:03:24... Initializing PLLs... Initializing Clocks.. Initializing DDR PLLs/Clocks... Initializing DDR controller... Initializing data section... Initializing stack ptr... Switching to 'C' code... Starting Microloader C... Chip: KRONOS Found Internal MYSTI110 PHY on GMAC0 Checking for Guide button press ... GCS in ISA MODE GCS: SFC DEVICE SETUP COMPLETE BOX MAC OK! BOX: Type: TRINITY V2 Rev: 7530C100 Setting up default ATAG list... Jumping to U-Boot ... BOOT_TIME: 577 ms since POR -------------------------------------------------------------------------------- | U-Boot 2009.08-00068-g69a4049 (Dec 10 2015 - 14:51:59) CST HDx | |------------------------------------------------------------------------------| | Chipset information | | Vendor: Entropic Type: KRONOS Revision: B0 Fuses: 00010001 | |------------------------------------------------------------------------------| | Clock information | | *** not available yet *** | |------------------------------------------------------------------------------| | Frontpanel information | | Vendor: CST Version: 5.1 Display: none | |------------------------------------------------------------------------------| | Memory configuration | | Start | End | Type | Description | |----------+----------+---------+----------------------------------------------| | 00000000 | 1FFFFFFF | RAM | System main memory bank #0 (512M) | | D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 ( 4M / 64K x 64) | *** Warning - bad CRC or SFC, using default environment | 00000000*| 07FFFFFF*| NAND | Toshiba NAND 128MiB 3,3V 8-bit | |------------------------------------------------------------------------------| | Network configuration | | MAC: LIP 6300 address: 00-xx-xx-xx-xx-xx | -------------------------------------------------------------------------------- Hit any key to stop autoboot: 0 SFC read: e0631000.flash_nand: partitioning exceeds flash size 'kernel' is not a number Wrong Image Format for bootm command ERROR: can't get kernel image! CST HD2 # Ist da eventuell der Flashspeicher defekt? Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
sammy909 Geschrieben 10. März 2021 Melden Share Geschrieben 10. März 2021 Hi, kronos Image ist richtig ? vor 58 Minuten schrieb falp: 'kernel' is not a number Wrong Image Format for bootm command ERROR: can't get kernel image! Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Don de Deckelwech Geschrieben 10. März 2021 Melden Share Geschrieben 10. März 2021 Hi, da sind die Bootargs verbogen, da kann man mit den normalen Methoden nix mehr machen. Aber damals im Bluepeer-Forum hat ein selbst davon Betroffener rausgefunden, wie man das wieder hinbiegt. Ich weiss grad nicht, ob es die Anleitung auch hier in der Keywelt gibt, deshalb hier ein Link ins NI-Forum: https://www.neutrino-images.de/board/viewtopic.php?f=48&t=29 Bitte zuerst die I. Methode versuchen und die Befehle dort nicht abtippen, sondern per Copy&Paste einfügen. Wenn du Fragen hast, stelle sie bitte vorher, bevor du ausversehen was falsch machst. Das wird schon... Ciao, DdD. 1 1 Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
falp Geschrieben 11. März 2021 Autor Melden Share Geschrieben 11. März 2021 vor 12 Stunden schrieb Don de Deckelwech: Hi, da sind die Bootargs verbogen, da kann man mit den normalen Methoden nix mehr machen. Aber damals im Bluepeer-Forum hat ein selbst davon Betroffener rausgefunden, wie man das wieder hinbiegt. Ich weiss grad nicht, ob es die Anleitung auch hier in der Keywelt gibt, deshalb hier ein Link ins NI-Forum: Unsichtbaren Inhalt anzeigen https://www.neutrino-images.de/board/viewtopic.php?f=48&t=29 Bitte zuerst die I. Methode versuchen und die Befehle dort nicht abtippen, sondern per Copy&Paste einfügen. Wenn du Fragen hast, stelle sie bitte vorher, bevor du ausversehen was falsch machst. Das wird schon... Ciao, DdD. Danke! Ich werde es Heute zum Abend ausprobieren. Dann gibt es einen Ergebnisbericht! Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
falp Geschrieben 11. März 2021 Autor Melden Share Geschrieben 11. März 2021 Die I. Methode hat den Erfolg gebracht! Spoiler Bootlog: =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2021.03.11 23:41:31 =~=~=~=~=~=~=~=~=~=~=~= Starting Microloader ASM built on Mar 28 2016 18:15:49... Initializing PLLs... Initializing Clocks.. Initializing DDR PLLs/Clocks... Initializing DDR controller... Initializing data section... Initializing stack ptr... Switching to 'C' code... Starting Microloader C... Chip: KRONOS Found Internal MYSTI110 PHY on GMAC0 Checking for Guide button press ... GCS in ISA MODE GCS: SFC DEVICE SETUP COMPLETE BOX MAC OK! BOX: Type: TRINITY V2 Rev: 7530C100 Setting up default ATAG list... Jumping to U-Boot ... BOOT_TIME: 578 ms since POR -------------------------------------------------------------------------------- | U-Boot 2009.08-00068-g69a4049 (Dec 22 2015 - 18:30:54) CST HDx | |------------------------------------------------------------------------------| | Chipset information | | Vendor: Entropic Type: KRONOS Revision: B0 Fuses: 00010001 | |------------------------------------------------------------------------------| | Clock information | | *** not available yet *** | |------------------------------------------------------------------------------| | Frontpanel information | | Vendor: CST Version: 5.1 Display: none | |------------------------------------------------------------------------------| | Memory configuration | | Start | End | Type | Description | |----------+----------+---------+----------------------------------------------| | 00000000 | 1FFFFFFF | RAM | System main memory bank #0 (512M) | | D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 ( 4M / 64K x 64) | 00000000*| 07FFFFFF*| NAND | Toshiba NAND 128MiB 3,3V 8-bit | |------------------------------------------------------------------------------| | Network configuration | | MAC: LIP 6300 address: 00-xx-xx-xx-xx-xx | -------------------------------------------------------------------------------- Hit any key to stop autoboot: 3 2 1 0 SFC read: offset 0x100000, size 0x300000 0% 0% 0% 0% 0% 0% 0% 0% 1% 1% 1% 1% 1% 1% 1% 1% 2% 2% 2% 2% 2% 2% 2% 2% 3% 3% 3% 3% 3% 3% 3% 4% 4% 4% 4% 4% 4% 4% 4% 5% 5% 5% 5% 5% 5% 5% 5% 6% 6% 6% 6% 6% 6% 6% 7% 7% 7% 7% 7% 7% 7% 7% 8% 8% 8% 8% 8% 8% 8% 8% 9% 9% 9% 9% 9% 9% 9% 10% 10% 10% 10% 10% 10% 10% 10% 11% 11% 11% 11% 11% 11% 11% 11% 12% 12% 12% 12% 12% 12% 12% 13% 13% 13% 13% 13% 13% 13% 13% 14% 14% 14% 14% 14% 14% 14% 14% 15% 15% 15% 15% 15% 15% 15% 15% 16% 16% 16% 16% 16% 16% 16% 17% 17% 17% 17% 17% 17% 17% 17% 18% 18% 18% 18% 18% 18% 18% 18% 19% 19% 19% 19% 19% 19% 19% 20% 20% 20% 20% 20% 20% 20% 20% 21% 21% 21% 21% 21% 21% 21% 21% 22% 22% 22% 22% 22% 22% 22% 23% 23% 23% 23% 23% 23% 23% 23% 24% 24% 24% 24% 24% 24% 24% 24% 25% 25% 25% 25% 25% 25% 25% 26% 26% 26% 26% 26% 26% 26% 26% 27% 27% 27% 27% 27% 27% 27% 27% 28% 28% 28% 28% 28% 28% 28% 29% 29% 29% 29% 29% 29% 29% 29% 30% 30% 30% 30% 30% 30% 30% 30% 31% 31% 31% 31% 31% 31% 31% 31% 32% 32% 32% 32% 32% 32% 32% 33% 33% 33% 33% 33% 33% 33% 33% 34% 34% 34% 34% 34% 34% 34% 34% 35% 35% 35% 35% 35% 35% 35% 36% 36% 36% 36% 36% 36% 36% 36% 37% 37% 37% 37% 37% 37% 37% 37% 38% 38% 38% 38% 38% 38% 38% 39% 39% 39% 39% 39% 39% 39% 39% 40% 40% 40% 40% 40% 40% 40% 40% 41% 41% 41% 41% 41% 41% 41% 42% 42% 42% 42% 42% 42% 42% 42% 43% 43% 43% 43% 43% 43% 43% 43% 44% 44% 44% 44% 44% 44% 44% 45% 45% 45% 45% 45% 45% 45% 45% 46% 46% 46% 46% 46% 46% 46% 46% 47% 47% 47% 47% 47% 47% 47% 47% 48% 48% 48% 48% 48% 48% 48% 49% 49% 49% 49% 49% 49% 49% 49% 50% 50% 50% 50% 50% 50% 50% 50% 51% 51% 51% 51% 51% 51% 51% 52% 52% 52% 52% 52% 52% 52% 52% 53% 53% 53% 53% 53% 53% 53% 53% 54% 54% 54% 54% 54% 54% 54% 55% 55% 55% 55% 55% 55% 55% 55% 56% 56% 56% 56% 56% 56% 56% 56% 57% 57% 57% 57% 57% 57% 57% 58% 58% 58% 58% 58% 58% 58% 58% 59% 59% 59% 59% 59% 59% 59% 59% 60% 60% 60% 60% 60% 60% 60% 61% 61% 61% 61% 61% 61% 61% 61% 62% 62% 62% 62% 62% 62% 62% 62% 63% 63% 63% 63% 63% 63% 63% 63% 64% 64% 64% 64% 64% 64% 64% 65% 65% 65% 65% 65% 65% 65% 65% 66% 66% 66% 66% 66% 66% 66% 66% 67% 67% 67% 67% 67% 67% 67% 68% 68% 68% 68% 68% 68% 68% 68% 69% 69% 69% 69% 69% 69% 69% 69% 70% 70% 70% 70% 70% 70% 70% 71% 71% 71% 71% 71% 71% 71% 71% 72% 72% 72% 72% 72% 72% 72% 72% 73% 73% 73% 73% 73% 73% 73% 74% 74% 74% 74% 74% 74% 74% 74% 75% 75% 75% 75% 75% 75% 75% 75% 76% 76% 76% 76% 76% 76% 76% 77% 77% 77% 77% 77% 77% 77% 77% 78% 78% 78% 78% 78% 78% 78% 78% 79% 79% 79% 79% 79% 79% 79% 79% 80% 80% 80% 80% 80% 80% 80% 81% 81% 81% 81% 81% 81% 81% 81% 82% 82% 82% 82% 82% 82% 82% 82% 83% 83% 83% 83% 83% 83% 83% 84% 84% 84% 84% 84% 84% 84% 84% 85% 85% 85% 85% 85% 85% 85% 85% 86% 86% 86% 86% 86% 86% 86% 87% 87% 87% 87% 87% 87% 87% 87% 88% 88% 88% 88% 88% 88% 88% 88% 89% 89% 89% 89% 89% 89% 89% 90% 90% 90% 90% 90% 90% 90% 90% 91% 91% 91% 91% 91% 91% 91% 91% 92% 92% 92% 92% 92% 92% 92% 93% 93% 93% 93% 93% 93% 93% 93% 94% 94% 94% 94% 94% 94% 94% 94% 95% 95% 95% 95% 95% 95% 95% 95% 96% 96% 96% 96% 96% 96% 96% 97% 97% 97% 97% 97% 97% 97% 97% 98% 98% 98% 98% 98% 98% 98% 98% 99% 99% 99% 99% 99% 99% 99% 3145728 bytes read: OK ## Booting kernel from Legacy Image at 01000000 ... Image Name: Coolstream Kernel (compressed) Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2981377 Bytes = 2.8 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 3.10.93 (image@server) (gcc version 6.3.1 20170109 (crosstool-NG 1) ) #1 SMP Sun Apr 15 15:27:43 CEST 2018 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Entropic Kronos STB Platform with FDT, model: CoolStream HD2 Kronos STB [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] Early platform io descriptors mapping... [ 0.000000] PERCPU: Embedded 7 pages/cpu @80da8000 s5952 r8192 d14528 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: noinitrd console=ttyS0,115200n8 mtdparts=e0632000.flash_sfc:256k@0k(uldr),512k@256k(u-boot),128k@768k(env),128k@896k(spare),-(kernel);e0631000.flash_nand:56m@0k(root0),16m@56m(var),-(root1) root=mtd:root0 rootfstype=jffs2 rw [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 512MB = 512MB total [ 0.000000] Memory: 247144k/247144k available, 277144k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xa0800000 - 0xff000000 (1512 MB) [ 0.000000] lowmem : 0x80000000 - 0xa0000000 ( 512 MB) [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ 0.000000] .text : 0x80008000 - 0x806584f8 (6466 kB) [ 0.000000] .init : 0x80659000 - 0x80687740 ( 186 kB) [ 0.000000] .data : 0x80688000 - 0x806c8e60 ( 260 kB) [ 0.000000] .bss : 0x806c8e60 - 0x806e3224 ( 105 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:350 [ 0.000000] GIC CPU mask not found - kernel will fail to boot. [ 0.000000] GIC CPU mask not found - kernel will fail to boot. [ 0.000000] Cortex A9 frequency at 600 MHz [ 0.000000] Initializing Cortex A9 Global Timer at Vir:0xFEA00200, using, at Freq:300 MHz [ 0.000000] sched_clock: 32 bits at 300MHz, resolution 3ns, wraps every 14316ms [ 0.000000] smp_twd: clock not found -2 [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [ttyS0] enabled [ 0.249695] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) [ 0.292755] pid_max: default: 32768 minimum: 301 [ 0.297559] Mount-cache hash table entries: 512 [ 0.303989] CPU: Testing write buffer coherency: ok [ 0.309083] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.314710] Setting up static identity map for 0x803c47a0 - 0x803c47f8 [ 0.321237] L310 cache controller enabled [ 0.325156] l2x0: 8 ways, CACHE_ID 0x410004c7, AUX_CTRL 0x32421001, Cache size: 131072 B [ 0.333787] Brought up 1 CPUs [ 0.336665] SMP: Total of 1 processors activated (1196.85 BogoMIPS). [ 0.342986] CPU: All CPU(s) started in SVC mode. [ 0.348247] devtmpfs: initialized [ 0.356606] NET: Registered protocol family 16 [ 0.361718] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.475079] GMAC0: active interface is 1 [ 0.479064] ChipID=0x1000 ChipRevID=0x100 [ 0.483148] nx_dmac: Registered with 8 channels [ 0.510003] bio: create slab <bio-0> at 0 [ 0.515385] GPIO: base febab000 (phys e06ab000) [ 0.519984] GPIO: base feb69000 (phys e0669000) [ 0.526345] SCSI subsystem initialized [ 0.531490] usbcore: registered new interface driver usbfs [ 0.537075] usbcore: registered new interface driver hub [ 0.542740] usbcore: registered new device driver usb [ 0.548178] pps_core: LinuxPPS API ver. 1 registered [ 0.553106] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.562389] PTP clock support registered [ 0.567957] cfg80211: Calling CRDA to update world regulatory domain [ 0.575764] Switching to clocksource arm_global_timer [ 0.599683] NET: Registered protocol family 2 [ 0.604992] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.612071] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.618484] TCP: Hash tables configured (established 4096 bind 4096) [ 0.624837] TCP: reno registered [ 0.627977] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.633826] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.640322] NET: Registered protocol family 1 [ 0.645062] RPC: Registered named UNIX socket transport module. [ 0.650912] RPC: Registered udp transport module. [ 0.655546] RPC: Registered tcp transport module. [ 0.660219] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.666768] PM: STB Platform power mgmt initialization. [ 0.797804] NFS: Registering the id_resolver key type [ 0.802858] Key type id_resolver registered [ 0.806946] Key type id_legacy registered [ 0.810974] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.817338] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.825289] msgmni has been set to 482 [ 0.830397] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.837682] io scheduler noop registered [ 0.841630] io scheduler deadline registered [ 0.846479] io scheduler cfq registered (default) [ 0.851854] e06b2000.serial: ttyS0 at MMIO 0xe06b2000 (irq = 47) is a uart-ip3106 [ 0.866268] loop: module loaded [ 0.870472] ahci-stb e0638000.sata: unable to find phy [ 0.875523] SATA: Enable mpll_ss_en (rd_val=0x571185, wr_val=0x5711a5) [ 0.882063] SATA: Enable rx_term_en0 (rd_val=0x277, wr_val=0x277) [ 0.888081] ahci-stb e0638000.sata: SSS flag set, parallel bus scan disabled [ 0.895117] ahci-stb e0638000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 0.903903] ahci-stb e0638000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 0.913361] ata4294967295: SATA PHY offline [ 0.918378] scsi0 : ahci_platform [ 0.922514] ata1: SATA max UDMA/133 mmio [mem 0xe0638000-0xe0638fff] port 0x100 irq 39 [ 0.932062] NAND device: Manufacturer ID: 0x98, Chip ID: 0xf1 (Toshiba NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64 [ 0.944487] Bad block table found at page 65472, version 0x01 [ 0.950954] Bad block table found at page 65408, version 0x01 [ 0.956998] nand_read_bbt: bad block at 0x000006000000 [ 0.962109] 3 cmdlinepart partitions found on MTD device e0631000.flash_nand [ 0.969041] Creating 3 MTD partitions on "e0631000.flash_nand": [ 0.974932] 0x000000000000-0x000003800000 : "root0" [ 0.981303] 0x000003800000-0x000004800000 : "var" [ 0.987305] 0x000004800000-0x000008000000 : "root1" [ 0.995499] JEDEC ID = 0x1c3016 , Extended Device ID = 0x1c30 [ 1.001307] nx_sfc e0632000.flash_sfc: en25q32 (4096 Kbytes) [ 1.006876] 5 cmdlinepart partitions found on MTD device e0632000.flash_sfc [ 1.013787] Creating 5 MTD partitions on "e0632000.flash_sfc": [ 1.019573] 0x000000000000-0x000000040000 : "uldr" [ 1.025926] 0x000000040000-0x0000000c0000 : "u-boot" [ 1.032317] 0x0000000c0000-0x0000000e0000 : "env" [ 1.038380] 0x0000000e0000-0x000000100000 : "spare" [ 1.044959] 0x000000100000-0x000000400000 : "kernel" [ 1.051792] tun: Universal TUN/TAP device driver, 1.6 [ 1.056744] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.063493] DWMAC1000 [ 1.065766] stmmac - user ID: 0x36, Synopsys ID: 0x36 [ 1.070837] Ring mode enabled [ 1.073799] DMA HW capability register supported [ 1.078292] Enhanced/Alternate descriptors [ 1.082652] Enabled extended descriptors [ 1.086587] RX Checksum Offload Engine supported (type 2) [ 1.092054] TX Checksum insertion supported [ 1.096262] Wake-Up On Lan supported [ 1.099934] Enable RX Mitigation via HW Watchdog Timer [ 1.119806] libphy: stmmac: probed [ 1.123198] eth0: PHY ID 0293c412 at 0 IRQ POLL (stmmac-0:00) active [ 1.129445] eth0: PHY ID 00000000 at 1 IRQ POLL (stmmac-0:01) [ 1.135164] eth0: PHY ID 00000000 at 2 IRQ POLL (stmmac-0:02) [ 1.140858] eth0: PHY ID 00000000 at 3 IRQ POLL (stmmac-0:03) [ 1.146552] eth0: PHY ID 00000000 at 4 IRQ POLL (stmmac-0:04) [ 1.152260] eth0: PHY ID 00000000 at 5 IRQ POLL (stmmac-0:05) [ 1.157956] eth0: PHY ID 00000000 at 6 IRQ POLL (stmmac-0:06) [ 1.163669] eth0: PHY ID 00000000 at 7 IRQ POLL (stmmac-0:07) [ 1.169361] eth0: PHY ID 00000000 at 8 IRQ POLL (stmmac-0:08) [ 1.175070] eth0: PHY ID 00000000 at 9 IRQ POLL (stmmac-0:09) [ 1.180771] eth0: PHY ID 00000000 at 10 IRQ POLL (stmmac-0:0a) [ 1.186554] eth0: PHY ID 00000000 at 11 IRQ POLL (stmmac-0:0b) [ 1.192349] eth0: PHY ID 00000000 at 12 IRQ POLL (stmmac-0:0c) [ 1.198132] eth0: PHY ID 00000000 at 13 IRQ POLL (stmmac-0:0d) [ 1.203927] eth0: PHY ID 00000000 at 14 IRQ POLL (stmmac-0:0e) [ 1.209709] eth0: PHY ID 00000000 at 15 IRQ POLL (stmmac-0:0f) [ 1.215504] eth0: PHY ID 00000000 at 16 IRQ POLL (stmmac-0:10) [ 1.221293] eth0: PHY ID 00000000 at 17 IRQ POLL (stmmac-0:11) [ 1.227076] eth0: PHY ID 00000000 at 18 IRQ POLL (stmmac-0:12) [ 1.232871] eth0: PHY ID 00000000 at 19 IRQ POLL (stmmac-0:13) [ 1.238654] eth0: PHY ID 00000000 at 20 IRQ POLL (stmmac-0:14) [ 1.244448] eth0: PHY ID 00000000 at 21 IRQ POLL (stmmac-0:15) [ 1.250235] eth0: PHY ID 00000000 at 22 IRQ POLL (stmmac-0:16) [ 1.256019] eth0: PHY ID 00000000 at 23 IRQ POLL (stmmac-0:17) [ 1.261814] eth0: PHY ID 00000000 at 24 IRQ POLL (stmmac-0:18) [ 1.267597] eth0: PHY ID 00000000 at 25 IRQ POLL (stmmac-0:19) [ 1.273392] eth0: PHY ID 00000000 at 26 IRQ POLL (stmmac-0:1a) [ 1.279175] eth0: PHY ID 00000000 at 27 IRQ POLL (stmmac-0:1b) [ 1.284969] eth0: PHY ID 00000000 at 28 IRQ POLL (stmmac-0:1c) [ 1.290757] eth0: PHY ID 00000000 at 29 IRQ POLL (stmmac-0:1d) [ 1.296541] eth0: PHY ID 00000000 at 30 IRQ POLL (stmmac-0:1e) [ 1.302335] eth0: PHY ID 00000000 at 31 IRQ POLL (stmmac-0:1f) [ 1.308378] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.314992] ehci-platform: EHCI generic platform driver [ 1.320242] ehci-platform e066c000.usb: EHCI Host Controller [ 1.325817] ehci-platform e066c000.usb: new USB bus registered, assigned bus number 1 [ 1.333728] ehci-platform e066c000.usb: irq 93, io mem 0xe066c000 [ 1.350096] ehci-platform e066c000.usb: USB 2.0 started, EHCI 1.00 [ 1.356243] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.362963] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.370115] usb usb1: Product: EHCI Host Controller [ 1.374934] usb usb1: Manufacturer: Linux 3.10.93 ehci_hcd [ 1.380391] usb usb1: SerialNumber: e066c000.usb [ 1.385840] hub 1-0:1.0: USB hub found [ 1.389516] hub 1-0:1.0: 1 port detected [ 1.393660] ehci-platform e066d000.usb: EHCI Host Controller [ 1.399238] ehci-platform e066d000.usb: new USB bus registered, assigned bus number 2 [ 1.407158] ehci-platform e066d000.usb: irq 94, io mem 0xe066d000 [ 1.413269] ata1: SATA PHY offline [ 1.416591] ata1: SATA link down (SStatus 0 SControl 300) [ 1.430081] ehci-platform e066d000.usb: USB 2.0 started, EHCI 1.00 [ 1.436234] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.442948] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.450102] usb usb2: Product: EHCI Host Controller [ 1.454923] usb usb2: Manufacturer: Linux 3.10.93 ehci_hcd [ 1.460376] usb usb2: SerialNumber: e066d000.usb [ 1.465770] hub 2-0:1.0: USB hub found [ 1.469445] hub 2-0:1.0: 1 port detected [ 1.474034] usbcore: registered new interface driver usb-storage [ 1.480432] usbcore: registered new interface driver usbserial [ 1.487749] usbcore: registered new interface driver usbhid [ 1.493292] usbhid: USB HID core driver [ 1.497285] TCP: cubic registered [ 1.500526] NET: Registered protocol family 17 [ 1.505348] Key type dns_resolver registered [ 1.509630] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 3 [ 1.517172] ThumbEE CPU extension supported. [ 1.522464] ### dt-test ### No testcase data in device tree; not running tests [ 2.521004] VFS: Mounted root (jffs2 filesystem) on device 31:0. [ 2.527856] devtmpfs: mounted [ 2.531050] Freeing unused kernel memory: 184K (80659000 - 80687000) init started: BusyBox v1.32.0 (2020-07-07 18:49:13 CEST) [ 3.389287] NET: Registered protocol family 10 try to mount /dev/mtdblock1 to /var starting /etc/init.d/S02loadmodules ... Sat Jan 1 00:00:00 CET 2000 Creating device node for cs_display Running insmod now ....... insmod: can't insert '/lib/modules/3.10.93/extra/lnxdvbciDrv.ko': No such device Driver modules loaded, please start the app now... rootdir=/dev table=<stdin> Creating device node for KAL Creating device node for notifyq Creating device node for platform Creating device node for content Creating device node for standby Creating device node for video Creating device node for audio Creating device node for pvr Creating device node for cs_control Creating device node for cs_ir Creating device node for fb starting /etc/init.d/S04mdev ... starting /etc/init.d/S05mount ... starting /etc/init.d/S50hostname ... starting /etc/init.d/S51networking ... Configuring network interfaces... Starting wlan0 Failed to connect to wpa_supplicant - wpa_ctrl_open: Success Could not read interface wlan0 flags: No such device Failed to initialize driver interface done. [logoview] done with Timeout... starting /etc/init.d/S52syslogd ... starting /etc/init.d/S60autofs ... Jan 1 00:00:13 CST-Trinity-Duo syslog.info syslogd started: BusyBox v1.32.0 1 Jan 00:00:13 ntpdate[1017]: ntpdate 4.2.8p6@1.3265-o (1) starting starting /etc/init.d/S80dvdreadfs ... starting /etc/init.d/S90inetd ... starting /etc/init.d/S96nfsd ... starting /var/etc/init.d/S9T_tuxcald ... starting /var/etc/init.d/S9T_tuxmaild ... Jan 1 00:00:14 CST-Trinity-Duo daemon.info : starting pid 1053, tty '': '/etc/init.d/start_neutrino' Please press Enter to activate this console. /var/plugins/operations camd_init /var/plugins/operations cardserver_start /var/plugins/operations camd_start /var/plugins/operations rezap 11 Mar 23:41:56 ntpdate[1017]: step time server 130.133.1.10 offset 668821300.986597 sec [ConfigFile] Unable to open file /share/tuxbox/neutrino/themes/.theme for reading. [frontend.cpp:Open:304] /dev/dvb/adapter0/frontend2: No such file or directory [frontend.cpp:Open:304] /dev/dvb/adapter0/frontend3: No such file or directory [frontend.cpp:Open:304] /dev/dvb/adapter1/frontend0: No such file or directory [frontend.cpp:Open:304] /dev/dvb/adapter1/frontend1: No such file or directory [frontend.cpp:Open:304] /dev/dvb/adapter1/frontend2: No such file or directory [frontend.cpp:Open:304] /dev/dvb/adapter1/frontend3: No such file or directory [frontend.cpp:Open:304] /dev/dvb/adapter2/frontend0: No such file or directory [frontend.cpp:Open:304] /dev/dvb/adapter2/frontend1: No such file or directory [frontend.cpp:Open:304] /dev/dvb/adapter2/frontend2: No such file or directory [frontend.cpp:Open:304] /dev/dvb/adapter2/frontend3: No such file or directory [frontend.cpp:Open:304] /dev/dvb/adapter3/frontend0: No such file or directory [frontend.cpp:Open:304] /dev/dvb/adapter3/frontend1: No such file or directory [frontend.cpp:Open:304] /dev/dvb/adapter3/frontend2: No such file or directory [frontend.cpp:Open:304] /dev/dvb/adapter3/frontend3: No such file or directory /tmp/camd.socket: No such file or directory 2021-03-11 23:42:03.791 [sectionsd] start 2021-03-11 23:42:03.838 [sectionsd] starting 2021-03-11 23:42:03.873 [sectionsd] timeThread::run:: starting, pid 1086 (1701115056) 2021-03-11 23:42:03.881 [sectionsd] eitThread::run:: starting, pid 1086 (1699017904) 2021-03-11 23:42:03.890 [sectionsd] cnThread::run:: starting, pid 1086 (1696920752) 2021-03-11 23:42:03.911 [sectionsd] freeSatThread::run:: starting, pid 1086 (1694823600) 2021-03-11 23:42:03.926 [sectionsd] timeThread: get DVB time ch 0x000000000000 (isOpen 1) [ConfigFile] Unable to open file /var/tuxbox/config/bookmarks for reading. 2021-03-11 23:42:04.480 [sectionsd] timeThread: get DVB time ch 0x000000000000 rc: 8 neutrino_sets_time 0 2021-03-11 23:42:04.496 [sectionsd] SIsectionTIME::parse: TDT time: Thu Mar 11 23:42:03 2021 2021-03-11 23:42:04.500 [sectionsd] timeThread: timediff -1500195, current: 11.03.2021 23:42:04, dvb: Thu Mar 11 23:42:03 2021 2021-03-11 23:42:03.000 2021-03-11 23:42:03.005 2021-03-11 23:42:03.005 2021-03-11 23:42:03.005 [sectionsd] timeThread: Time set via DVB (TDT), going to sleep for 5 seconds. [sectionsd] cnThread::run:: time set: Thu Mar 11 23:42:03 2021 [sectionsd] eitThread::run:: time set: Thu Mar 11 23:42:03 2021 [sectionsd] freeSatThread::run:: time set: Thu Mar 11 23:42:03 2021 2021-03-11 23:42:03.026 [sectionsd] commandserviceStopped 2021-03-11 23:42:03.094 2021-03-11 23:42:03.095 [sectionsd] cnThread::shouldSleep first retry (1) -> restart demux [sectionsd] cnThread: stop eit update filter (not active) 2021-03-11 23:42:03.108 [sectionsd] commandserviceStopped done 2021-03-11 23:42:03.146 [sectionsd] commandserviceChanged: Service change to b45c03fb0001283d demux #0 sh: you need to specify whom to kill 2021-03-11 23:42:03.327 [sectionsd] addEvent: ch 03fb0001283d running 1 (next) got_CN 0 /tmp/camd.socket: No such file or directory 2021-03-11 23:42:03.427 [sectionsd] timeThread: get DVB time ch 0x03fb0001283d (isOpen 1) 2021-03-11 23:42:03.465 [sectionsd] timeThread: get DVB time ch 0x03fb0001283d rc: 29 neutrino_sets_time 0 2021-03-11 23:42:03.480 [sectionsd] SIsectionTIME::parse: TOT time: Thu Mar 11 23:42:03 2021 2021-03-11 23:42:03.496 [sectionsd] timeThread: timediff -496578, current: 11.03.2021 23:42:03, dvb: Thu Mar 11 23:42:03 2021 2021-03-11 23:42:03.502 [sectionsd] difference is < 120s, using adjtime(0, -496578). oldd(0, 0) 2021-03-11 23:42:03.522 [sectionsd] timeThread: Time set via DVB (TOT), going to sleep for 1800 seconds. 2021-03-11 23:42:03.905 [sectionsd] commandserviceChanged: Service change to b45c03fb0001283d demux #0 2021-03-11 23:42:03.945 [sectionsd] commandserviceChanged: Service change to b45c03fb0001283d demux #0 2021-03-11 23:42:04.035 [sectionsd] addEvent: ch 03fb0001283d running 4 (curr) got_CN 2 2021-03-11 23:42:06.287 [sectionsd] cnThread: eit update filter, ch 0x03fb0001283d, current ver 0x04 got events 3 (not active) [operations] rezap... 2021-03-11 23:42:12.721 [sectionsd] commandserviceChanged: Service change to b45c03fb0001283d demux #0 /tmp/camd.socket: No such file or directory 2021-03-11 23:42:31.461 [sectionsd] eitThread::StopRun: to lock 2021-03-11 23:42:31.751 [sectionsd] eitThread::StopRun: to closefd 2021-03-11 23:42:31.754 [sectionsd] eitThread::StopRun: to unlock 2021-03-11 23:42:31.760 [sectionsd] cnThread::StopRun: to lock 2021-03-11 23:42:31.766 [sectionsd] cnThread::StopRun: to closefd 2021-03-11 23:42:31.771 [sectionsd] cnThread::StopRun: to unlock 2021-03-11 23:42:31.778 [sectionsd] timeThread::StopRun: to lock 2021-03-11 23:42:31.783 [sectionsd] timeThread::StopRun: to closefd 2021-03-11 23:42:31.789 [sectionsd] timeThread::StopRun: to unlock 2021-03-11 23:42:31.795 [sectionsd] freeSatThread::StopRun: to lock 2021-03-11 23:42:31.803 [sectionsd] freeSatThread::StopRun: to closefd 2021-03-11 23:42:31.807 [sectionsd] freeSatThread::StopRun: to unlock 2021-03-11 23:42:31.814 [sectionsd] broadcasting... 2021-03-11 23:42:31.819 [sectionsd] pausing... 2021-03-11 23:42:31.824 [sectionsd] join Housekeeping 2021-03-11 23:42:31.829 [sectionsd] join TOT 2021-03-11 23:42:31.833 [sectionsd] timeThread::Stop: to broadcast 2021-03-11 23:42:31.838 [sectionsd] timeThread::Stop: to join 2021-03-11 23:42:31.845 [sectionsd] timeThread::Stop: to close 2021-03-11 23:42:31.849 [sectionsd] join EIT 2021-03-11 23:42:31.854 [sectionsd] eitThread::Stop: to broadcast 2021-03-11 23:42:31.859 [sectionsd] eitThread::Stop: to join 2021-03-11 23:42:31.865 [sectionsd] eitThread::Stop: to close 2021-03-11 23:42:31.870 [sectionsd] join CN 2021-03-11 23:42:31.875 [sectionsd] cnThread::Stop: to broadcast 2021-03-11 23:42:31.879 [sectionsd] cnThread: stop eit update filter (active) 2021-03-11 23:42:31.886 [sectionsd] cnThread::Stop: to join 2021-03-11 23:42:31.902 [sectionsd] cnThread::Stop: to close 2021-03-11 23:42:31.904 [sectionsd] join FSEIT 2021-03-11 23:42:31.909 [sectionsd] freeSatThread::Stop: to broadcast 2021-03-11 23:42:31.914 [sectionsd] freeSatThread::Stop: to join 2021-03-11 23:42:31.921 [sectionsd] freeSatThread::Stop: to close 2021-03-11 23:42:31.926 [sectionsd] stopped Neutrino exited with exit code 1 calling 'shutdown_helper 0 64 5' now: 26925042, timer 0, FP timer 0min Vielen Dank für die Hilfe! 1 Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge