skyline666 Geschrieben 29. Dezember 2019 Melden Share Geschrieben 29. Dezember 2019 Hallo User, ich wollte gestern an meinem Fernseher einen alten AppleTV anschließen und habe dabei das HDMI Kabel meiner Zee2 genutzt. Nach dem Testen habe ich dann die Coolie wieder angestöpselt und dann hatte ich die Situation, dass kein Bild mehr erschien. Nur Ton erscheint aus dem Lautsprecher. Dann das gleiche noch mal mit HDMI auf einen PC Monitor probiert. Ergebnis gleich bis auf das dort der Coolstream Bildschirm (vermute ROM Bild) erscheint. Schon beim starten des Images kommt kein Bild. Bei Scart kommt zwar auch zwischendurch ein Bild mit wirren grünen Streifen aber dann das normale Fernsehbild. Habe ich etwas zerschossen an der Hardware beim stecken? Könnte man noch was testen? Mfg Skyline666 Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Admin Gandalf Geschrieben 29. Dezember 2019 Admin Melden Share Geschrieben 29. Dezember 2019 Am 29.12.2019 um 08:13 schrieb skyline666: Habe ich etwas zerschossen an der Hardware beim stecken? Könnte man noch was testen? Vermutlich HDMI Chip abgeschossen, mach mal ein Bootlog mit Putty. Der HDMI Ausgang der Cooli ist empfindlich was statische Überspannung betrifft. Netzteil würde ich auch mal überprüfen. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
skyline666 Geschrieben 29. Dezember 2019 Autor Melden Share Geschrieben 29. Dezember 2019 Hallo Gandal, werde ich morgen mal angehen! War heute noch auf Famaly Day. erst mal vielen Dank. Mfg Skyline666! Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
topie88 Geschrieben 30. Dezember 2019 Melden Share Geschrieben 30. Dezember 2019 (bearbeitet) Das ist mir mit meiner Neo V1 auch so gegangenen. Ich hab sie dann als defekt verkauft, der Käufer hat das mir dann bestätigt das der HDMI bei ihm auch nicht geht. Die Nevis Boxen sind da echt empfindlich. Auslöser hier war eine Umverkabelung der Sät, Netz, und HDMI Kabel um die Leitungsführung zu optimieren und Aufzuhübschen, ich hätte es einfach scheiße aussehen lassen sollen. bearbeitet 30. Dezember 2019 von topie88 Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
skyline666 Geschrieben 30. Dezember 2019 Autor Melden Share Geschrieben 30. Dezember 2019 (bearbeitet) Am 29.12.2019 um 09:08 schrieb Gandal: Vermutlich HDMI Chip abgeschossen, mach mal ein Bootlog mit Putty. Der HDMI Ausgang der Cooli ist empfindlich was statische Überspannung betrifft. Netzteil würde ich auch mal überprüfen. Hallo Gandal, hier das bootlog! Schau bitte mal mit Deiner fachlichen Kompetenz mal rüber. Dir schon im Voraus vielen Dank! Starting Microloader ASM built on Mar 28 2016 18:03:24... Initializing PLLs... Initializing Clocks.. Initializing DDR PLLs/Clocks... Initializing DDR controller... Initializing data section... Initializing stack ptr... Starting Microloader C... Chip: KRONOS Found Internal MYSTI110 PHY on GMAC0 Checking for Guide button press ... GCS in ISA MODE GCS: SFC DEVICE SETUP COMPLETE BOX MAC OK! BOX: Type: ZEE Rev: 75500100 Setting up default ATAG list... Jumping to U-Boot ... BOOT_TIME: 600 ms since POR -------------------------------------------------------------------------------- | U-Boot 2009.08-00068-g69a4049 (Dec 10 2015 - 14:51:59) CST HDx | |------------------------------------------------------------------------------| | Chipset information | | Vendor: Entropic Type: KRONOS Revision: B0 Fuses: 00010001 | |------------------------------------------------------------------------------| | Clock information | | *** not available yet *** | |------------------------------------------------------------------------------| | Frontpanel information | | Vendor: CST Version: 3.3 Display: OLED (128 x 64 px) | |------------------------------------------------------------------------------| | Memory configuration | | Start | End | Type | Description | |----------+----------+---------+----------------------------------------------| | 00000000 | 1FFFFFFF | RAM | System main memory bank #0 (512M) | | D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 ( 4M / 64K x 64) | *** Warning - bad CRC or SFC, using default environment | 00000000*| 1FFFFFFF*| NAND | Toshiba NAND 512MiB 3,3V 8-bit | |------------------------------------------------------------------------------| | Network configuration | | MAC: LIP 6300 address: 00-C5-5C-25-BA-B7 | -------------------------------------------------------------------------------- Hit any key to stop autoboot: 0 SFC read: offset 0x100000, size 0x300000 3145728 bytes read: OK ## Booting kernel from Legacy Image at 01000000 ... Image Name: Coolstream Kernel (compressed) Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2981377 Bytes = 2.8 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 3.10.93 (image@server) (gcc version 6.3.1 20170109 (crosstool-NG 1) ) #1 SMP Sun Apr 15 15:27:43 CEST 2018 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Entropic Kronos STB Platform with FDT, model: CoolStream HD2 Kronos STB [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] Early platform io descriptors mapping... [ 0.000000] PERCPU: Embedded 7 pages/cpu @80da8000 s5952 r8192 d14528 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: noinitrd console=ttyS0,115200n8 mtdparts=e0632000.flash_sfc:256k@0k(uldr),512k@256k(u-boot),128k@768k(env),128k@896k(spare),-(kernel);e0631000.flash_nand:256m@0k(root0),32m@256m(var),-(root1) root=mtd:root0 rootfstype=jffs2 rw [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 512MB = 512MB total [ 0.000000] Memory: 247144k/247144k available, 277144k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xa0800000 - 0xff000000 (1512 MB) [ 0.000000] lowmem : 0x80000000 - 0xa0000000 ( 512 MB) [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ 0.000000] .text : 0x80008000 - 0x806584f8 (6466 kB) [ 0.000000] .init : 0x80659000 - 0x80687740 ( 186 kB) [ 0.000000] .data : 0x80688000 - 0x806c8e60 ( 260 kB) [ 0.000000] .bss : 0x806c8e60 - 0x806e3224 ( 105 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:350 [ 0.000000] GIC CPU mask not found - kernel will fail to boot. [ 0.000000] GIC CPU mask not found - kernel will fail to boot. [ 0.000000] Cortex A9 frequency at 600 MHz [ 0.000000] Initializing Cortex A9 Global Timer at Vir:0xFEA00200, using, at Freq:300 MHz [ 0.000000] sched_clock: 32 bits at 300MHz, resolution 3ns, wraps every 14316ms [ 0.000000] smp_twd: clock not found -2 [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [ttyS0] enabled [ 0.249862] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) [ 0.292758] pid_max: default: 32768 minimum: 301 [ 0.297561] Mount-cache hash table entries: 512 [ 0.303983] CPU: Testing write buffer coherency: ok [ 0.309079] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.314707] Setting up static identity map for 0x803c47a0 - 0x803c47f8 [ 0.321240] L310 cache controller enabled [ 0.325158] l2x0: 8 ways, CACHE_ID 0x410004c7, AUX_CTRL 0x32421001, Cache size: 131072 B [ 0.333783] Brought up 1 CPUs [ 0.336657] SMP: Total of 1 processors activated (1196.85 BogoMIPS). [ 0.342981] CPU: All CPU(s) started in SVC mode. [ 0.348245] devtmpfs: initialized [ 0.356639] NET: Registered protocol family 16 [ 0.361753] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.475139] GMAC0: active interface is 1 [ 0.479129] ChipID=0x1000 ChipRevID=0x100 [ 0.483229] nx_dmac: Registered with 8 channels [ 0.510019] bio: create slab <bio-0> at 0 [ 0.515383] GPIO: base febab000 (phys e06ab000) [ 0.519974] GPIO: base feb69000 (phys e0669000) [ 0.526358] SCSI subsystem initialized [ 0.531482] usbcore: registered new interface driver usbfs [ 0.537065] usbcore: registered new interface driver hub [ 0.542721] usbcore: registered new device driver usb [ 0.548157] pps_core: LinuxPPS API ver. 1 registered [ 0.553080] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.562363] PTP clock support registered [ 0.567932] cfg80211: Calling CRDA to update world regulatory domain [ 0.575726] Switching to clocksource arm_global_timer [ 0.599560] NET: Registered protocol family 2 [ 0.604685] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.611749] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.618153] TCP: Hash tables configured (established 4096 bind 4096) [ 0.624476] TCP: reno registered [ 0.627617] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.633439] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.639880] NET: Registered protocol family 1 [ 0.644492] RPC: Registered named UNIX socket transport module. [ 0.650368] RPC: Registered udp transport module. [ 0.654968] RPC: Registered tcp transport module. [ 0.659634] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.666226] PM: STB Platform power mgmt initialization. [ 0.797202] NFS: Registering the id_resolver key type [ 0.802279] Key type id_resolver registered [ 0.806359] Key type id_legacy registered [ 0.810381] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.816753] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.824728] msgmni has been set to 482 [ 0.829765] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.837125] io scheduler noop registered [ 0.840977] io scheduler deadline registered [ 0.845839] io scheduler cfq registered (default) [ 0.851209] e06b2000.serial: ttyS0 at MMIO 0xe06b2000 (irq = 47) is a uart-ip3106 [ 0.865585] loop: module loaded [ 0.869716] ahci-stb e0638000.sata: unable to find phy [ 0.874818] SATA: Enable mpll_ss_en (rd_val=0x571185, wr_val=0x5711a5) [ 0.881253] SATA: Enable rx_term_en0 (rd_val=0x277, wr_val=0x277) [ 0.887317] ahci-stb e0638000.sata: SSS flag set, parallel bus scan disabled [ 0.894325] ahci-stb e0638000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 0.903113] ahci-stb e0638000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 0.912581] ata4294967295: SATA PHY offline [ 0.917602] scsi0 : ahci_platform [ 0.921555] ata1: SATA max UDMA/133 mmio [mem 0xe0638000-0xe0638fff] port 0x100 irq 39 [ 0.931025] NAND device: Manufacturer ID: 0x98, Chip ID: 0xdc (Toshiba NAND 512MiB 3,3V 8-bit), 512MiB, page size: 2048, OOB size: 64 [ 0.943425] Bad block table found at page 262080, version 0x01 [ 0.949940] Bad block table found at page 262016, version 0x01 [ 0.956197] nand_read_bbt: bad block at 0x00001cf60000 [ 0.961260] nand_read_bbt: bad block at 0x00001cfa0000 [ 0.966387] 3 cmdlinepart partitions found on MTD device e0631000.flash_nand [ 0.973341] Creating 3 MTD partitions on "e0631000.flash_nand": [ 0.979207] 0x000000000000-0x000010000000 : "root0" [ 0.985757] 0x000010000000-0x000012000000 : "var" [ 0.991851] 0x000012000000-0x000020000000 : "root1" [ 1.000185] JEDEC ID = 0x1c3016 , Extended Device ID = 0x1c30 [ 1.005931] nx_sfc e0632000.flash_sfc: en25q32 (4096 Kbytes) [ 1.011572] 5 cmdlinepart partitions found on MTD device e0632000.flash_sfc [ 1.018446] Creating 5 MTD partitions on "e0632000.flash_sfc": [ 1.024260] 0x000000000000-0x000000040000 : "uldr" [ 1.030646] 0x000000040000-0x0000000c0000 : "u-boot" [ 1.036952] 0x0000000c0000-0x0000000e0000 : "env" [ 1.043086] 0x0000000e0000-0x000000100000 : "spare" [ 1.049323] 0x000000100000-0x000000400000 : "kernel" [ 1.056379] tun: Universal TUN/TAP device driver, 1.6 [ 1.061405] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.068051] DWMAC1000 [ 1.070350] stmmac - user ID: 0x36, Synopsys ID: 0x36 [ 1.075329] Ring mode enabled [ 1.078354] DMA HW capability register supported [ 1.082866] Enhanced/Alternate descriptors [ 1.087166] Enabled extended descriptors [ 1.091151] RX Checksum Offload Engine supported (type 2) [ 1.096584] TX Checksum insertion supported [ 1.100824] Wake-Up On Lan supported [ 1.104489] Enable RX Mitigation via HW Watchdog Timer [ 1.124471] libphy: stmmac: probed [ 1.127791] eth0: PHY ID 0293c412 at 0 IRQ POLL (stmmac-0:00) active [ 1.134167] eth0: PHY ID 00000000 at 1 IRQ POLL (stmmac-0:01) [ 1.139806] eth0: PHY ID 00000000 at 2 IRQ POLL (stmmac-0:02) [ 1.145526] eth0: PHY ID 00000000 at 3 IRQ POLL (stmmac-0:03) [ 1.151224] eth0: PHY ID 00000000 at 4 IRQ POLL (stmmac-0:04) [ 1.156913] eth0: PHY ID 00000000 at 5 IRQ POLL (stmmac-0:05) [ 1.162622] eth0: PHY ID 00000000 at 6 IRQ POLL (stmmac-0:06) [ 1.168317] eth0: PHY ID 00000000 at 7 IRQ POLL (stmmac-0:07) [ 1.174026] eth0: PHY ID 00000000 at 8 IRQ POLL (stmmac-0:08) [ 1.179722] eth0: PHY ID 00000000 at 9 IRQ POLL (stmmac-0:09) [ 1.185430] eth0: PHY ID 00000000 at 10 IRQ POLL (stmmac-0:0a) [ 1.191219] eth0: PHY ID 00000000 at 11 IRQ POLL (stmmac-0:0b) [ 1.197002] eth0: PHY ID 00000000 at 12 IRQ POLL (stmmac-0:0c) [ 1.202797] eth0: PHY ID 00000000 at 13 IRQ POLL (stmmac-0:0d) [ 1.208579] eth0: PHY ID 00000000 at 14 IRQ POLL (stmmac-0:0e) [ 1.214374] eth0: PHY ID 00000000 at 15 IRQ POLL (stmmac-0:0f) [ 1.220163] eth0: PHY ID 00000000 at 16 IRQ POLL (stmmac-0:10) [ 1.225945] eth0: PHY ID 00000000 at 17 IRQ POLL (stmmac-0:11) [ 1.231740] eth0: PHY ID 00000000 at 18 IRQ POLL (stmmac-0:12) [ 1.237524] eth0: PHY ID 00000000 at 19 IRQ POLL (stmmac-0:13) [ 1.243317] eth0: PHY ID 00000000 at 20 IRQ POLL (stmmac-0:14) [ 1.249100] eth0: PHY ID 00000000 at 21 IRQ POLL (stmmac-0:15) [ 1.254896] eth0: PHY ID 00000000 at 22 IRQ POLL (stmmac-0:16) [ 1.260683] eth0: PHY ID 00000000 at 23 IRQ POLL (stmmac-0:17) [ 1.266467] eth0: PHY ID 00000000 at 24 IRQ POLL (stmmac-0:18) [ 1.272262] eth0: PHY ID 00000000 at 25 IRQ POLL (stmmac-0:19) [ 1.278045] eth0: PHY ID 00000000 at 26 IRQ POLL (stmmac-0:1a) [ 1.283840] eth0: PHY ID 00000000 at 27 IRQ POLL (stmmac-0:1b) [ 1.289622] eth0: PHY ID 00000000 at 28 IRQ POLL (stmmac-0:1c) [ 1.295416] eth0: PHY ID 00000000 at 29 IRQ POLL (stmmac-0:1d) [ 1.301205] eth0: PHY ID 00000000 at 30 IRQ POLL (stmmac-0:1e) [ 1.306988] eth0: PHY ID 00000000 at 31 IRQ POLL (stmmac-0:1f) [ 1.313044] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.319464] ehci-platform: EHCI generic platform driver [ 1.324938] ehci-platform e066c000.usb: EHCI Host Controller [ 1.330565] ehci-platform e066c000.usb: new USB bus registered, assigned bus number 1 [ 1.338383] ehci-platform e066c000.usb: irq 93, io mem 0xe066c000 [ 1.360091] ehci-platform e066c000.usb: USB 2.0 started, EHCI 1.00 [ 1.366240] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.372950] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.380103] usb usb1: Product: EHCI Host Controller [ 1.384923] usb usb1: Manufacturer: Linux 3.10.93 ehci_hcd [ 1.390383] usb usb1: SerialNumber: e066c000.usb [ 1.395860] hub 1-0:1.0: USB hub found [ 1.399534] hub 1-0:1.0: 1 port detected [ 1.403709] ehci-platform e066d000.usb: EHCI Host Controller [ 1.409280] ehci-platform e066d000.usb: new USB bus registered, assigned bus number 2 [ 1.417194] ehci-platform e066d000.usb: irq 94, io mem 0xe066d000 [ 1.423247] ata1: SATA PHY offline [ 1.426571] ata1: SATA link down (SStatus 0 SControl 300) [ 1.440078] ehci-platform e066d000.usb: USB 2.0 started, EHCI 1.00 [ 1.446233] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.452945] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.460101] usb usb2: Product: EHCI Host Controller [ 1.464921] usb usb2: Manufacturer: Linux 3.10.93 ehci_hcd [ 1.470375] usb usb2: SerialNumber: e066d000.usb [ 1.475761] hub 2-0:1.0: USB hub found [ 1.479435] hub 2-0:1.0: 1 port detected [ 1.484046] usbcore: registered new interface driver usb-storage [ 1.490439] usbcore: registered new interface driver usbserial [ 1.497743] usbcore: registered new interface driver usbhid [ 1.503283] usbhid: USB HID core driver [ 1.507270] TCP: cubic registered [ 1.510517] NET: Registered protocol family 17 [ 1.515327] Key type dns_resolver registered [ 1.519602] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 3 [ 1.527137] ThumbEE CPU extension supported. [ 1.532426] ### dt-test ### No testcase data in device tree; not running tests [ 1.730080] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1.881640] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 1.888259] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.895349] usb 1-1: Product: USB2.0 Hub [ 1.900632] hub 1-1:1.0: USB hub found [ 1.904641] hub 1-1:1.0: 4 ports detected [ 2.600058] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 2.752190] usb 2-1: New USB device found, idVendor=174c, idProduct=5136 [ 2.758805] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 2.765890] usb 2-1: Product: AS2105 [ 2.769415] usb 2-1: Manufacturer: ASMedia [ 2.773483] usb 2-1: SerialNumber: 00000000000000000000 [ 2.779840] usb-storage 2-1:1.0: USB Mass Storage device detected [ 2.786109] scsi1 : usb-storage 2-1:1.0 [ 3.791054] scsi 1:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6 [ 3.800888] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 4.624990] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.633348] sd 1:0:0:0: [sda] Write Protect is off [ 4.638842] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.673503] sda: sda1 [ 4.679350] sd 1:0:0:0: [sda] Attached SCSI disk [ 6.959898] VFS: Mounted root (jffs2 filesystem) on device 31:0. [ 6.967185] devtmpfs: mounted [ 6.970351] Freeing unused kernel memory: 184K (80659000 - 80687000) init started: BusyBox v1.30.1 (2019-06-22 15:09:50 CEST) [ 7.853314] NET: Registered protocol family 10 try to mount /dev/mtdblock1 to /var [ 8.286337] jffs2: Empty flash at 0x01088ad8 ends at 0x01089000 starting /etc/init.d/S02loadmodules ... Sat Jan 1 00:00:00 CET 2000 Creating device node for cs_display Running insmod now ....... Driver modules loaded, please start the app now... Creating device node for KAL Creating device node for notifyq Creating device node for platform Creating device node for content Creating device node for standby Creating device node for video Creating device node for audio Creating device node for pvr Creating device node for ci Creating device node for cs_control Creating device node for cs_ir Creating device node for fb starting /etc/init.d/S04mdev ... [logoview] done with Timeout... error connect socket /tmp/neutrino.sock: No such file or directory starting /etc/init.d/S05mount ... starting /etc/init.d/S50hostname ... starting /etc/init.d/S51networking ... Configuring network interfaces... Starting wlan0 Failed to connect to wpa_supplicant - wpa_ctrl_open: Success Could not read interface wlan0 flags: No such device Failed to initialize driver interface done. starting /etc/init.d/S52syslogd ... Jan 1 00:00:14 CST-25BAB7 syslog.info syslogd started: BusyBox v1.30.1 starting /etc/init.d/S60autofs ... 1 Jan 00:00:14 ntpdate[1137]: ntpdate 4.2.8p6@1.3265-o (1) starting starting /etc/init.d/S80dvdreadfs ... starting /etc/init.d/S90inetd ... starting /etc/init.d/S96nfsd ... starting /var/etc/init.d/S9T_tuxcald ... starting /var/etc/init.d/S9T_tuxmaild ... Jan 1 00:00:15 CST-25BAB7 daemon.info : starting pid 1173, tty '': '/etc/init.d/start_neutrino' Please press Enter to activate this console. /var/plugins/operations camd_init /var/plugins/operations cardserver_start starte doscam Sat Jan 1 00:00:16 CET 2000 /var/plugins/operations camd_start /var/plugins/operations rezap 30 Dec 12:56:21 ntpdate[1137]: step time server 130.133.1.10 offset 631025765.066037 sec /var/plugins/operations: line 262: 6: not found [frontend.cpp:Open:284] /dev/dvb/adapter0/frontend2: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter0/frontend3: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter1/frontend0: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter1/frontend1: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter1/frontend2: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter1/frontend3: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter2/frontend0: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter2/frontend1: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter2/frontend2: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter2/frontend3: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter3/frontend0: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter3/frontend1: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter3/frontend2: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter3/frontend3: No such file or directory MON: The POD Monitor task has started. Version = 01, Release = 00, Subrelease = 01, PID: 1213 MON: Initializing slot->inbound_queue : 76076070 slot->outbound_queue: 76075f18 xport_command_queue: 76075d00 MON: Start resource providers... XPORT: POD Transport task started. PID: 1213 RM: Resource Manager thread started. PID: 1213 XPORT: transport connection #1 set to Idle LINK: POD link task started with arg=0x00000000, PID: 1213 MON: Starting 9 resource(s). MON starting 9 resources finished MON after BR_POD_mon_start_rps POD timer thread PID: 1213 comming in add resource provider, rid=10041 RM before wait for db ready, pid: 1213 APPMMI thread starts, PID: 1213 UPGRADE thread is started, PID: 1213 comming in add resource provider, rid=8e1001 HOSTCTRL thread is started, PID: 1213 comming in add resource provider, rid=200041 SYSTIME resource start, PID: 1213 comming in add resource provider, rid=240041 SYSTIME RP: System Time main loop processing started. CA resource provider started with arg=0x00000000, PID: 1213 APPINFO thread starts, PID: 1213 comming in add resource provider, rid=20043 APPINFO RP: resource provider is added, resource ID :0x20043 APPINFO RP: APPINFO resource provider main loop processing started. RM after wait for db ready, pid: 1213 HOSTLANG_CNTY thread is started, PID: 1213 comming in add resource provider, rid=8d1001 MMI thread is started, PID: 1213 comming in add resource provider, rid=400041 CP resource start, PID: 1213 CP thread get delay time 0(s) CP: Start of initialization... HOSTCTRL RP: resource provider is added ciappReportModuleStatus: status 9, gCardStatus: 0 PHYS-CI+: cs_ci_init_controller called comming in add resource provider, rid=410041 UPGRADE RP: resource provider is added UPGRADE RP: UPGRADE resource provider main loop processing started. RM: Resource Manager message processing started. comming in add resource provider, rid=30041 CA RP: Resource Provider main loop processing started. HOSTLANG_CNTY RP: resource provider is added MON after wait event MON: Wait for all required resource providers to sign on.... APPMMI RP: resource provider is added MMI RP: resource provider is added HOSTCTRL RP: HOSTCTRL resource provider main loop processing started. CP nvram: Root certificate file is for production HOSTLANG_CNTY RP: HOSTLANG_CNTY resource provider main loop processing started. LINK: hard reset complete. LINK: slot #0 state = BR_POD_SLOT_NOT_INIT MMI RP: MMI resource provider main loop processing started. APPMMI RP: APPMMI resource provider main loop processing started. dump mbuf.... LINK: slot #0 state = BR_POD_SLOT_CARD_NOT_PRESENT RM: recvd LINK_STATUS tag(0x42), len=8 RM: No host-pod interface RM: close all connections on slot 0 LINK: after bypass card dump mbuf.... ciappReportModuleStatus: status 0, gCardStatus: 0 dump mbuf.... no CICAM brand id extension. comming in add resource provider, rid=8c1001 RM: recvd RM_RESOURCES_CHANGED tag(0x43), len=8 CP RP: resource provider is added CP: Resource Provider main loop processing started. 2019-12-30 12:56:32.396 [sectionsd] start 2019-12-30 12:56:32.522 [sectionsd] starting 2019-12-30 12:56:32.689 [sectionsd] timeThread::run:: starting, pid 1213 (1672021168) 2019-12-30 12:56:32.796 [sectionsd] eitThread::run:: starting, pid 1213 (1669924016) 2019-12-30 12:56:32.811 [sectionsd] cnThread::run:: starting, pid 1213 (1667826864) 2019-12-30 12:56:32.821 [sectionsd] timeThread: get DVB time ch 0x000000000000 (isOpen 1) 2019-12-30 12:56:32.851 [sectionsd] freeSatThread::run:: starting, pid 1213 (1665729712) [ConfigFile] Unable to open file /var/tuxbox/config/bookmarks for reading. 2019-12-30 12:56:34.040 [sectionsd] commandserviceStopped 2019-12-30 12:56:34.085 [sectionsd] cnThread: stop eit update filter (not active) 2019-12-30 12:56:34.088 [sectionsd] commandserviceStopped done 2019-12-30 12:56:34.130 [sectionsd] commandserviceChanged: Service change to 48d200020085000a demux #0 2019-12-30 12:56:34.302 [sectionsd] timeThread: get DVB time ch 0x00020085000a rc: -1 neutrino_sets_time 0 2019-12-30 12:56:34.309 [sectionsd] timeThread: Time set FAILED (enabled: ntp 0 dvb 1) sh: you need to specify whom to kill 2019-12-30 12:56:35.030 [sectionsd] commandserviceChanged: Service change to 48d200020085000a demux #0 2019-12-30 12:56:35.070 [sectionsd] commandserviceChanged: Service change to 48d200020085000a demux #0 2019-12-30 12:56:35.344 [sectionsd] timeThread: get DVB time ch 0x00020085000a (isOpen 1) 2019-12-30 12:56:37.935 [sectionsd] timeThread: get DVB time ch 0x00020085000a rc: 8 neutrino_sets_time 0 2019-12-30 12:56:37.944 [sectionsd] SIsectionTIME::parse: TDT time: Mon Dec 30 12:56:36 2019 2019-12-30 12:56:37.949 [sectionsd] timeThread: timediff -1948979, current: 30.12.2019 12:56:37, dvb: Mon Dec 30 12:56:36 2019 2019-12-30 12:56:36.000 [sectionsd] cnThread::run:: time set: Mon Dec 30 12:56:36 2019 2019-12-30 12:56:36.006 [sectionsd] freeSatThread::run:: time set: Mon Dec 30 12:56:36 2019 2019-12-30 12:56:36.011 2019-12-30 12:56:36.011 [sectionsd] timeThread: Time set via DVB (TDT), going to sleep for 5 seconds. [sectionsd] eitThread::run:: time set: Mon Dec 30 12:56:36 2019 --- > rezapping 2019-12-30 12:56:36.732 [sectionsd] addEvent: ch 00020085000a running 0 (next) got_CN 0 2019-12-30 12:56:37.681 [sectionsd] addEvent: ch 00020085000a running 4 (curr) got_CN 2 2019-12-30 12:56:37.854 [sectionsd] commandserviceChanged: Service change to 48d200020085000a demux #0 2019-12-30 12:56:37.898 [sectionsd] cnThread: eit update filter, ch 0x00020085000a, current ver 0x0c got events 3 (not active) 2019-12-30 12:56:41.050 [sectionsd] timeThread: get DVB time ch 0x00020085000a (isOpen 1) 2019-12-30 12:56:42.362 [sectionsd] timeThread: get DVB time ch 0x00020085000a rc: 29 neutrino_sets_time 0 2019-12-30 12:56:42.372 [sectionsd] SIsectionTIME::parse: TOT time: Mon Dec 30 12:56:42 2019 2019-12-30 12:56:42.376 [sectionsd] timeThread: timediff -376291, current: 30.12.2019 12:56:42, dvb: Mon Dec 30 12:56:42 2019 2019-12-30 12:56:42.389 [sectionsd] difference is < 120s, using adjtime(0, -376291). oldd(0, 0) 2019-12-30 12:56:42.399 [sectionsd] timeThread: Time set via DVB (TOT), going to sleep for 1800 seconds. ^[OA^[OA^[OA^[OA^[OA^[OA^[OA^[OA^[OA^[OA^[OA^[OA^[OA^[OA^[OA Dec 30 12:57:53 CST-25BAB7 daemon.info : starting pid 1174, tty '': '-/bin/sh' Starting Microloader ASM built on Mar 28 2016 18:03:24... Initializing PLLs... Initializing Clocks.. Initializing DDR PLLs/Clocks... Initializing DDR controller... Initializing data section... Initializing stack ptr... Starting Microloader C... Chip: KRONOS Found Internal MYSTI110 PHY on GMAC0 Checking for Guide button press ... GCS in ISA MODE GCS: SFC DEVICE SETUP COMPLETE BOX MAC OK! BOX: Type: ZEE Rev: 75500100 Setting up default ATAG list... Jumping to U-Boot ... BOOT_TIME: 600 ms since POR -------------------------------------------------------------------------------- | U-Boot 2009.08-00068-g69a4049 (Dec 10 2015 - 14:51:59) CST HDx | |------------------------------------------------------------------------------| | Chipset information | | Vendor: Entropic Type: KRONOS Revision: B0 Fuses: 00010001 | |------------------------------------------------------------------------------| | Clock information | | *** not available yet *** | |------------------------------------------------------------------------------| | Frontpanel information | | Vendor: CST Version: 3.3 Display: OLED (128 x 64 px) | |------------------------------------------------------------------------------| | Memory configuration | | Start | End | Type | Description | |----------+----------+---------+----------------------------------------------| | 00000000 | 1FFFFFFF | RAM | System main memory bank #0 (512M) | | D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 ( 4M / 64K x 64) | *** Warning - bad CRC or SFC, using default environment | 00000000*| 1FFFFFFF*| NAND | Toshiba NAND 512MiB 3,3V 8-bit | |------------------------------------------------------------------------------| | Network configuration | | MAC: LIP 6300 address: 00-C5-5C-25-BA-B7 | -------------------------------------------------------------------------------- Hit any key to stop autoboot: 0 SFC read: offset 0x100000, size 0x300000 3145728 bytes read: OK ## Booting kernel from Legacy Image at 01000000 ... Image Name: Coolstream Kernel (compressed) Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2981377 Bytes = 2.8 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 3.10.93 (image@server) (gcc version 6.3.1 20170109 (crosstool-NG 1) ) #1 SMP Sun Apr 15 15:27:43 CEST 2018 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Entropic Kronos STB Platform with FDT, model: CoolStream HD2 Kronos STB [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] Early platform io descriptors mapping... [ 0.000000] PERCPU: Embedded 7 pages/cpu @80da8000 s5952 r8192 d14528 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: noinitrd console=ttyS0,115200n8 mtdparts=e0632000.flash_sfc:256k@0k(uldr),512k@256k(u-boot),128k@768k(env),128k@896k(spare),-(kernel);e0631000.flash_nand:256m@0k(root0),32m@256m(var),-(root1) root=mtd:root0 rootfstype=jffs2 rw [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 BusyBox v1.30.1 (2019-06-22 15:09:50 CEST) built-in shell (ash) CST-25BAB7:/# Starting Microloader ASM built on Mar 28 2016 18:03:24... -/bin/sh: Starting: not found CST-25BAB7:/# Initializing PLLs... -/bin/sh: Initializing: not found CST-25BAB7:/# Initializing Clocks.. -/bin/sh: Initializing: not found CST-25BAB7:/# Initializing DDR PLLs/Clocks... -/bin/sh: Initializing: not found CST-25BAB7:/# Initializing DDR controller... -/bin/sh: Initializing: not found CST-25BAB7:/# Initializing data section... -/bin/sh: Initializing: not found CST-25BAB7:/# Initializing stack ptr... -/bin/sh: Initializing: not found CST-25BAB7:/# Starting Microloader C... -/bin/sh: Starting: not found CST-25BAB7:/# Chip: KRONOS -/bin/sh: Chip:: not found CST-25BAB7:/# Found Internal MYSTI110 PHY on GMAC0 -/bin/sh: Found: not found CST-25BAB7:/# Checking for Guide button press ... -/bin/sh: Checking: not found CST-25BAB7:/# GCS in ISA MODE -/bin/sh: GCS: not found CST-25BAB7:/# GCS: SFC DEVICE SETUP COMPLETE -/bin/sh: GCS:: not found CST-25BAB7:/# BOX MAC OK! -/bin/sh: BOX: not found CST-25BAB7:/# BOX: Type: ZEE Rev: 75500100 -/bin/sh: BOX:: not found CST-25BAB7:/# Setting up default ATAG list... -/bin/sh: Setting: not found CST-25BAB7:/# Jumping to U-Boot ... -/bin/sh: Jumping: not found CST-25BAB7:/# BOOT_TIME: 600 ms since POR -/bin/sh: BOOT_TIME:: not found CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# CST-25BAB7:/# ------------------------------------------------------------------ -------------- -/bin/sh: --------------------------------------------------------------------------------: not found CST-25BAB7:/# | U-Boot 2009.08-00068-g69a4049 (Dec 10 2015 - 14:51:59) CST HDx | -/bin/sh: syntax error: unexpected "|" CST-25BAB7:/# |----------------------------------------------------------------- -------------| -/bin/sh: syntax error: unexpected "|" CST-25BAB7:/# | Chipset information | > | Vendor: Entropic Type: KRONOS Revision: B0 Fuses: 00010001 | -/bin/sh: syntax error: unexpected "|" CST-25BAB7:/# |----------------------------------------------------------------- -------------| -/bin/sh: syntax error: unexpected "|" CST-25BAB7:/# | Clock information | > | *** not available yet *** | -/bin/sh: syntax error: unexpected "|" CST-25BAB7:/# |----------------------------------------------------------------- -------------| -/bin/sh: syntax error: unexpected "|" CST-25BAB7:/# | Frontpanel information | > | Vendor: CST Version: 3.3 Display: OLED (128 x 64 px) | -/bin/sh: syntax error: unexpected "|" CST-25BAB7:/# |----------------------------------------------------------------- -------------| -/bin/sh: syntax error: unexpected "|" CST-25BAB7:/# | Memory configuration | > | Start | End | Type | Description | -/bin/sh: syntax error: unexpected "|" CST-25BAB7:/# |----------+----------+---------+--------------------------------- -------------| -/bin/sh: syntax error: unexpected "|" CST-25BAB7:/# | 00000000 | 1FFFFFFF | RAM | System main memory bank #0 (512M ) | -/bin/sh: 1FFFFFFF: not found -/bin/sh: 00000000: not found -/bin/sh: -: not found -/bin/sh: System: not found -/bin/sh: RAM: not found CST-25BAB7:/# | D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 ( 4M / 64K x 64) | -/bin/sh: syntax error: unexpected "|" CST-25BAB7:/# *** Warning - bad CRC or SFC, using default environment -/bin/sh: bin: not found CST-25BAB7:/# | 00000000*| 1FFFFFFF*| NAND | Toshiba NAND 512MiB 3,3V 8-bit | -/bin/sh: syntax error: unexpected "|" CST-25BAB7:/# |----------------------------------------------------------------- -------------| -/bin/sh: syntax error: unexpected "|" CST-25BAB7:/# | Network configuration | > | MAC: LIP 6300 address: 00-C5-5C-25-BA-B7 | -/bin/sh: syntax error: unexpected "|" CST-25BAB7:/# ------------------------------------------------------------------ -------------- -/bin/sh: --------------------------------------------------------------------------------: not found CST-25BAB7:/# CST-25BAB7:/# Hit any key to stop autoboot: 0 -/bin/sh: Hit: not found CST-25BAB7:/# CST-25BAB7:/# SFC read: offset 0x100000, size 0x300000 -/bin/sh: SFC: not found CST-25BAB7:/# 3145728 bytes read: OK -/bin/sh: 3145728: not found CST-25BAB7:/# ## Booting kernel from Legacy Image at 01000000 ... CST-25BAB7:/# Image Name: Coolstream Kernel (compressed) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# Image Type: ARM Linux Kernel Image (uncompressed) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# Data Size: 2981377 Bytes = 2.8 MB -/bin/sh: Data: not found CST-25BAB7:/# Load Address: 00008000 -/bin/sh: Load: not found CST-25BAB7:/# Entry Point: 00008000 -/bin/sh: Entry: not found CST-25BAB7:/# Verifying Checksum ... OK -/bin/sh: Verifying: not found CST-25BAB7:/# Loading Kernel Image ... OK -/bin/sh: Loading: not found CST-25BAB7:/# OK -/bin/sh: OK: not found CST-25BAB7:/# Uncompressing Linux... done, booting the kernel. -/bin/sh: Uncompressing: not found CST-25BAB7:/# [ 0.000000] Booting Linux on physical CPU 0x0 sh: missing ] CST-25BAB7:/# [ 0.000000] Initializing cgroup subsys cpuset sh: missing ] CST-25BAB7:/# [ 0.000000] Linux version 3.10.93 (image@server) (gcc version 6 .3.1 20170109 (crosstool-NG 1) ) #1 SMP Sun Apr 15 15:27:43 CEST 2018 -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7) , cr=10c53c7d -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT alias ing instruction cache sh: missing ] CST-25BAB7:/# [ 0.000000] Machine: Entropic Kronos STB Platform with FDT, mod el: CoolStream HD2 Kronos STB sh: missing ] CST-25BAB7:/# [ 0.000000] Memory policy: ECC disabled, Data cache writealloc sh: missing ] CST-25BAB7:/# [ 0.000000] Early platform io descriptors mapping... sh: missing ] CST-25BAB7:/# [ 0.000000] PERCPU: Embedded 7 pages/cpu @80da8000 s5952 r8192 d14528 u32768 sh: missing ] CST-25BAB7:/# [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 sh: missing ] CST-25BAB7:/# [ 0.000000] Kernel command line: noinitrd console=ttyS0,115200n 8 mtdparts=e0632000.flash_sfc:256k@0k(uldr),512k@256k(u-boot),128k@768k(env),128 k@896k(spare),-(kernel);e0631000.flash_nand:256m@0k(root0),32m@256m(var),-(root1 ) root=mtd:root0 rootfstype=jffs2 rw -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 2 62144 bytes) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 13 1072 bytes) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.000000] Memory: 512MB = 512MB total sh: missing ] CST-25BAB7:/# [ 0.: 247144k/247144k available, 277144k reserved, 0K highmem sh: missing ] CST-25BAB7:/# [ 0.000000] Virtual kernel memory layout: sh: missing ] CST-25BAB7:/# [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.000 : 0xfff00000 - 0xfffe0000 ( 896 kB) -/bin/sh: syntax error: 0 - 0x806e3224 ( 105 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:350 [ 0.000000] GIC CPU mask not found - kernel will fail to boot. [ 0.000000] GIC CPU mask not found - kernel will fail to boot. [ 0.000000] Cortex A9 frequency at 600 MHz [ 0.000000] Initializing Cortex A9 Global Timer at Vir:0xFEA00200, using, at Freq:300 MHz [ 0.000000] sched_clock: 32 bits at 300MHz, resolution 3ns, wraps every 14316ms [ 0.000000] smp_twd: clock not found -2 [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [ttyS0] enabled [ 0.249862] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) [ 0.292758] pid_max: default: 32768 minimum: 301 [ 0.297561] Mount-cache hash table entries: 512 [ 0.303983] CPU: Testing write buffer coherency: ok [ 0.309079] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.314707] Setting up static identity map for 0x803c47a0 - 0x803c47f8 [ 0.321240] L310 cache controller enabled [ 0.325158] l2x0: 8 ways, CACHE_ID 0x410004c7, AUX_CTRL 0x32421001, Cache size: 131072 B [ 0.333783] Brought up 1 CPUs [ 0.336657] SMP: Total of 1 processors activated (1196.85 BogoMIPS). [ 0.342981] CPU: All CPU(s) started in SVC mode. [ 0.348245] devtmpfs: initialized [ 0.356639] NET: Registered protocol family 16 [ 0.361753] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.475139] GMAC0: active interface is 1 [ 0.479129] ChipID=0x1000 ChipRevID=0x100 [ 0.483229] nx_dmac: Registered with 8 channels [ 0.510019] bio: create slab <bio-0> at 0 [ 0.515383] GPIO: base febab000 (phys e06ab000) [ 0.519974] GPIO: base feb69000 (phys e0669000) [ 0.526358] SCSI subsystem initialized [ 0.531482] usbcore: registered new interface driver usbfs [ 0.537065] usbcore: registered new interface driver hub [ 0.542721] usbcore: registered new device driver usb [ 0.548157] pps_core: LinuxPPS API ver. 1 registered [ 0.553080] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.562363] PTP clock support registered [ 0.567932] cfg80211: Calling CRDA to update world regulatory domain [ 0.575726] Switching to clocksource arm_global_timer [ 0.599560] NET: Registered protocol family 2 [ 0.604685] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.611749] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.618153] TCP: Hash tables configured (established 4096 bind 4096) [ 0.624476] TCP: reno registered [ 0.627617] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.633439] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.639880] NET: Registered protocol family 1 [ 0.644492] RPC: Registered named UNIX socket transport module. [ 0.650368] RPC: Registered udp transport module. [ 0.654968] RPC: Registered tcp transport module. [ 0.659634] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.666226] PM: STB Platform power mgmt initialization. [ 0.797202] NFS: Registering the id_resolver key type [ 0.802279] Key type id_resolver registered [ 0.806359] Key type id_legacy registered [ 0.810381] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.816753] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.824728] msgmni has been set to 482 [ 0.829765unexpected "(" CST-25BAB7:/# [ 0.000000] vmalloc : 0xa0800000 - 0xff000000 (1512 MB) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.000000] lowmem : 0x80000000 - 0xa0000000 ( 512 MB) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.000000] .text : 0x80008000 - 0x806584f8 (6466 kB) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.000000] .init : 0x80659000 - 0x80687740 ( 186 kB) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.000000] .data : 0x80688000 - 6c8e60 ( 260 kB) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.000000] .bss : 0x806c8e60 - 0x806e3224 ( 105 kB) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 sh: missing ] CST-25BAB7:/# [ 0.000000] Hierarchical RCU implementation. sh: missing ] CST-25BAB7:/# [ 0.000000] RCU debugfs-based tracing is enabled. sh: missing ] CST-25BAB7:/# [ 0.000000] Additional per-CPU info printed with stalls. sh: missing ] CST-25BAB7:/# [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids= 1. sh: missing ] CST-25BAB7:/# [ 0.000000] NR_IRQS:350 sh: missing ] CST-25BAB7:/# [ 0.000000] GIC CPU mask not found - kernel will fail to boot. sh: missing ] CST-25BAB7:/# [ 0.000000] GIC CPU mask not found - kernel will fail to boot. sh: missing ] CST-25BAB7:/# [ 0.000000] Cortex A9 frequency at 600 MHz sh: missing ] CST-25BAB7:/# [ 0.000000] Initializing Cortex A9 Global Timer at Vir:0xFEA002 00, using, at Freq:300 MHz sh: missing ] CST-25BAB7:/# [ 0.000000] sched_clock: 32 bits at 300MHz, resolution 3ns, wra ps every 14316ms sh: missing ] CST-25BAB7:/# [ 0.000000] smp_twd: clock not found -2 sh: missing ] CST-25BAB7:/# [ 0.000000] Console: colour dummy device 80x30 sh: missing ] CST-25BAB7:/# [ 0.000000] console [ttyS0] enabled sh: missing ] CST-25BAB7:/# [ 0.249862] Calibrating delay loop... 1196.85 BogoMIPS (lpj=598 4256) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.292758] pid_max: default: 32768 minimum: 301 sh: missing ] CST-25BAB7:/# [ 0.297561] Mount-cache hash table entries: 512 sh: missing ] CST-25BAB7:/# [ 0.303983] CPU: Testing write buffer coherency: ok sh: missing ] CST-25BAB7:/# [ 0.309079] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 sh: missing ] CST-25BAB7:/# [ 0.314707] Setting up static identity map for 0x803c47a0 - 0x8 03c47f8 sh: missing ] CST-25BAB7:/# [ 0.321240] L310 cache controller enabled sh: missing ] CST-25BAB7:/# [ 0.325158] l2x0: 8 ways, CACHE_ID 0x410004c7, AUX_CTRL 0x32421 001, Cache size: 131072 B sh: missing ] CST-25BAB7:/# [ 0.333783] Brought up 1 CPUs sh: missing ] CST-25BAB7:/# [ 0.336657] SMP: Total of 1 processors activated (1196.85 BogoM IPS). -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.342981] CPU: All CPU(s) started in SVC mode. -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.348245] devtmpfs: initialized sh: missing ] CST-25BAB7:/# [ 0.356639] NET: Registered protocol family 16 sh: missing ] CST-25BAB7:/# [ 0.361753] DMA: preallocated 256 KiB pool for atomic coherent allocations sh: missing ] CST-25BAB7:/# [ 0.475139] GMAC0: active interface is 1 sh: missing ] CST-25BAB7:/# [ 0.479129] ChipID=0x1000 ChipRevID=0x100 sh: missing ] CST-25BAB7:/# [ 0.483229] nx_dmac: Registered with 8 channels sh: missing ] CST-25BAB7:/# [ 0.510019] bio: create slab <bio-0> at 0 -/bin/sh: can't open bio-0: no such file CST-25BAB7:/# [ 0.515383] GPIO: base febab000 (phys e06ab000) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.519974] GPIO: base feb69000 (phys e0669000) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.526358] SCSI subsystem initialized sh: missing ] CST-25BAB7:/# [ 0.531482] usbcore: registered new interface driver usbfs sh: missing ] CST-25BAB7:/# [ 0.537065] usbcore: registered new interface driver hub sh: missing ] CST-25BAB7:/# [ 0.542721] usbcore: registered new device driver usb sh: missing ] CST-25BAB7:/# [ 0.548157] pps_core: LinuxPPS API ver. 1 registered sh: missing ] CST-25BAB7:/# [ 0.553080] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> -/bin/sh: syntax error: unexpected newline CST-25BAB7:/# [ 0.562363] PTP clock support registered sh: missing ] CST-25BAB7:/# [ 0.567932] cfg80211: Calling CRDA to update world regulatory d omain sh: missing ] CST-25BAB7:/# [ 0.575726] Switching to clocksource arm_global_timer sh: missing ] CST-25BAB7:/# [ 0.599560] NET: Registered protocol family 2 sh: missing ] CST-25BAB7:/# [ 0.604685] TCP established hash table entries: 4096 (order: 3, 32768 bytes) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.611749] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.618153] TCP: Hash tables configured (established 4096 bind 4096) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.624476] TCP: reno registered sh: missing ] CST-25BAB7:/# [ 0.627617] UDP hash table entries: 256 (order: 1, 8192 bytes) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.633439] UDP-Lite hash table entries: 256 (order: 1, 8192 by tes) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.639880] NET: Registered protocol family 1 sh: missing ] CST-25BAB7:/# [ 0.644492] RPC: Registered named UNIX socket transport module. sh: missing ] CST-25BAB7:/# [ 0.650368] RPC: Registered udp transport module. sh: missing ] CST-25BAB7:/# [ 0.654968] RPC: Registered tcp transport module. sh: missing ] CST-25BAB7:/# [ 0.659634] RPC: Registered tcp NFSv4.1 backchannel transport m odule. sh: missing ] CST-25BAB7:/# [ 0.666226] PM: STB Platform power mgmt initialization. sh: missing ] CST-25BAB7:/# [ 0.797202] NFS: Registering the id_resolver key type sh: missing ] CST-25BAB7:/# [ 0.802279] Key type id_resolver registered sh: missing ] CST-25BAB7:/# [ 0.806359] Key type id_legacy registered sh: missing ] CST-25BAB7:/# [ 0.810381] Installing knfsd (copyright (C) 1996 okir@monad.swb .de). -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.816753] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.824728] msgmni has been set to 482 sh: missing ] CST-25BAB7:/# [ 0.829765] Block layer SCSI generic (bsg) driver version 0.4 l oaded (major 252) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.837125] io scheduler noop registere840977] io scheduler dea dline registered sh: missing ] CST-25BAB7:/# [ 0.845839] io scheduler cfq registered (default) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.851209] e06b2000.serial: ttyS0 at MMIO 0xe06b2000 (irq = 47 ) is a uart-ip3106 -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.865585] loop: module loaded sh: missing ] CST-25BAB7:/# [ 0.869716] ahci-stb e0638000.sata: unable to find phy sh: missing ] CST-25BAB7:/# [ 0.874818] SATA: Enable mpll_ss_en (rd_val=0x571185, wr_val=0x 5711a5) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.881253] SATA: Enable rx_term_en0 (rd_val=0x277, wr_val=0x27 7) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.887317] ahci-stb e0638000.sata: SSS flag set, parallel bus scan disabled sh: missing ] CST-25BAB7:/# [ 0.894325] ahci-stb e0638000.sata: AHCI 0001.0300 32 slots 1 p orts 3 Gbps 0x1 impl platform mode sh: missing ] CST-25BAB7:/# [ 0.903113] ahci-stb e0638000.sata: ags: ncq sntf stag pm led c lo only pmp pio slum part ccc apst 00 : "root0" [ 0.985757] 0x000010000000-0x000012000000 : "var" [ 0.991851] 0x000012000000-0x000020000000 : "root1" [ 1.000185] JEDEC ID = 0x1c3016 , Extended Device ID = 0x1c30 [ 1.005931] nx_sfc e0632000.flash_sfc: en25q32 (4096 Kbytes) [ 1.011572] 5 cmdlinepart partitions found on MTD device e0632000.flash_sfc [ 1.018446] Creating 5 MTD partitions on "e0632000.flash_sfc": [ 1.024260] 0x000000000000-0x000000040000 : "uldr" [ 1.030646] 0x000000040000-0x0000000c0000 : "u-boot" [ 1.036952] 0x0000000c0000-0x0000000e0000 : "env" [ 1.043086] 0x0000000e0000-0x000000100000 : "spare" [ 1.049323] 0x000000100000-0x000000400000 : "kernel" [ 1.056379] tun: Universal TUN/TAP device driver, 1.6 [ 1.061405] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.068051] DWMAC1000 [ 1.070350] stmmac - user ID: 0x36, Synopsys ID: 0x36 [ 1.075329] Ring mode enabled [ 1.078354] DMA HW capability register supported [ 1.082866] Enhanced/Alternate descriptors [ 1.087166] Enabled extended descriptors [ 1.091151] RX Checksum Offload Engine supported (type 2) [ 1.096584] TX Checksum insertion supported [ 1.100824] Wake-Up On Lan supported [ 1.104489] Enable RX Mitigation via HW Watchdog Timer [ 1.124471] libphy: stmmac: probed [ 1.127791] eth0: PHY ID 0293c412 at 0 IRQ POLL (stmmac-0:00) active [ 1.134167] eth0: PHY ID 00000000 at 1 IRQ POLL (stmmac-0:01) [ 1.139806] eth0: PHY ID 00000000 at 2 IRQ POLL (stmmac-0:02) [ 1.145526] eth0: PHY ID 00000000 at 3 IRQ POLL (stmmac-0:03) [ 1.151224] eth0: PHY ID 00000000 at 4 IRQ POLL (stmmac-0:04) [ 1.156913] eth0: PHY ID 00000000 at 5 IRQ POLL (stmmac-0:05) [ 1.162622] eth0: PHY ID 00000000 at 6 IRQ POLL (stmmac-0:06) [ 1.168317] eth0: PHY ID 00000000 at 7 IRQ POLL (stmmac-0:07) [ 1.174026] eth0: PHY ID 00000000 at 8 IRQ POLL (stmmac-0:08) [ 1.179722] eth0: PHY ID 00000000 at 9 IRQ POLL (stmmac-0:09) [ 1.185430] eth0: PHY ID 00000000 at 10 IRQ POLL (stmmac-0:0a) [ 1.191219] eth0: PHY ID 00000000 at 11 IRQ POLL (stmmac-0:0b) [ 1.197002] eth0: PHY ID 00000000 at 12 IRQ POLL (stmmac-0:0c) [ 1.202797] eth0: PHY ID 00000000 at 13 IRQ POLL (stmmac-0:0d) [ 1.208579] eth0: PHY ID 00000000 at 14 IRQ POLL (stmmac-0:0e) [ 1.214374] eth0: PHY ID 00000000 at 15 IRQ POLL (stmmac-0:0f) [ 1.220163] eth0: PHY ID 00000000 at 16 IRQ POLL (stmmac-0:10) [ 1.225945] eth0: PHY ID 00000000 at 17 IRQ POLL (stmmac-0:11) [ 1.231740] eth0: PHY ID 00000000 at 18 IRQ POLL (stmmac-0:12) [ 1.237524] eth0: PHY ID 00000000 at 19 IRQ POLL (stmmac-0:13) [ 1.243317] eth0: PHY ID 00000000 at 20 IRQ POLL (stmmac-0:14) [ 1.249100] eth0: PHY ID 00000000 at 21 IRQ POLL (stmmac-0:15) [ 1.254896] eth0: PHY ID 00000000 at 22 IRQ POLL (stmmac-0:16) [ 1.260683] eth0: PHY ID 00000000 at 23 IRQ POLL (stmmac-0:17) [ 1.266467] eth0: PHY ID 00000000 at 24 IRQ POLL (stmmac-0:18) [ 1.272262] eth0: PHY ID 00000000 at 25 IRQ POLL (stmmac-0:19) [ 1.278045] eth0: PHY ID 00000000 at 26 IRQ POLL (stmmac-0:1a) [ 1.283840] eth0: PHY ID 00000000 at 27 IRQ POLL (stmmac-0:1b) [ 1.289622] eth0: PHY ID 00000000 at 28 IRQ POLL (stmmac-0:1c) [ 1.295416] eth0: PHY ID 00000000 at 29 IRQ POLL (stmmac-0:1d) [ 1.301205] eth0: PHY ID 00000000 at 30 IRQsh: missing ] CST-25BAB7:/# [ 0.912581] ata4294967295: SATA PHY offline sh: missing ] CST-25BAB7:/# [ 0.917602] scsi0 : ahci_platform sh: missing ] CST-25BAB7:/# [ 0.921555] ata1: SATA max UDMA/133 mmio [mem 0xe0638000-0xe063 8fff] port 0x100 irq 39 sh: missing ] CST-25BAB7:/# [ 0.931025] NAND device: Manufacturer ID: 0x98, Chip ID: 0xdc ( Toshiba NAND 512MiB 3,3V 8-bit), 512MiB, page size: 2048, OOB size: 64 -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 0.943425] Bad block table found at page 262080, version 0x01 sh: missing ] CST-25BAB7:/# [ 0.949940] Bad block table found at page 262016, version 0x01 sh: missing ] CST-25BAB7:/# [ 0.956197] nand_read_bbt: bad block at 0x00001cf60000 sh: missing ] CST-25BAB7:/# [ 0.961260] nand_read_bbt: bad block at 0x00001cfa0000 sh: missing ] CST-25BAB7:/# [ 0.966387] 3 cmdlinepart partitions found on MTD device e06310 00.flash_nand sh: missing ] CST-25BAB7:/# [ 0.973341] Creating 3 MTD partitions on "e0631000.flash_nand": sh: missing ] CST-25BAB7:/# [ 0.979207] 0x000000000000-0x000010000000 : "root0" sh: missing ] CST-25BAB7:/# [ 0.985757] 0x000010000000-0x000012000000 : "var" sh: missing ] CST-25BAB7:/# [ 0.991851] 0x000012000000-0x000020000000 : "root1" sh: missing ] CST-25BAB7:/# [ 1.000185] JEDEC ID = 0x1c3016 , Extended Device ID = 0x1c30 sh: missing ] CST-25BAB7:/# [ 1.005931] nx_sfc e0632000.flash_sfc: en25q32 (4096 Kbytes) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.011572] 5 cmdlinepart partitions found on MTD device e06320 00.flash_sfc sh: missing ] CST-25BAB7:/# [ 1.018446] Creating 5 MTD partitions on "e0632000.flash_sfc": sh: missing ] CST-25BAB7:/# [ 1.024260] 0x000000000000-0x000000040000 : "uldr" sh: missing ] CST-25BAB7:/# [ 1.030646] 0x000000040000-0x0000000c0000 : "u-boot" sh: missing ] CST-25BAB7:/# [ 1.036952] 0x0000000c0000-0x0000000e0000 : "env" sh: missing ] CST-25BAB7:/# [ 1.043086] 0x0000000e0000-0x000000100000 : "spare" sh: missing ] CST-25BAB7:/# [ 1.049323] 0x000000100000-0x000000400000 : "kernel" sh: missing ] CST-25BAB7:/# [ 1.056379] tun: Universal TUN/TAP device driver, 1.6 sh: missing ] CST-25BAB7:/# [ 1.061405] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.c om> -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.068051] DWMAC1000 sh: missing ] CST-25BAB7:/# [ 1.070350] stmmac - user ID: 0x36, Synopsys ID: 0x36 sh: missing ] CST-25BAB7:/# [ 1.075329] Ring mode enabled sh: missing ] CST-25BAB7:/# [ 1.078354] DMA HW capability register supported sh: missing ] CST-25BAB7:/# [ 1.082866] Enhanced/Alternate descriptors sh: missing ] CST-25BAB7:/# [ 1.087166] Enabled extended descriptors sh: missing ] CST-25BAB7:/# [ 1.091151] RX Checksum Offload Engine supported (type 2) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.096584] TX Checksum insertion supported sh: missing ] CST-25BAB7:/# [ 1.100824] Wake-Up On Lan supported sh: missing ] CST-25BAB7:/# [ 1.104489] Enable RX Mitigation via HW Watchdog Timer sh: missing ] CST-25BAB7:/# [ 1.124471] libphy: stmmac: probed sh: missing ] CST-25BAB7:/# [ 1.127791] eth0: PHY ID 0293c412 at 0 IRQ POLL (stmmac-0:00) a ctive -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.134167] eth0: PHY ID 00000000 at 1 IRQ POLL (stmmac-0:01) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.139806] eth0: PHY ID 00000000 at 2 IRQ POLL (stmmac-0:02) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.145526] eth0: PHY ID 00000000 at 3 IRQ POLL (stmmac-0:03) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.151224] eth0: PHY ID 00000000 at 4 IRQ POLL (stmmac-0:04) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.156913] eth0: PHY ID 00000000 at 5 IRQ POLL (stmmac-0:05) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.162622] eth0: PHY ID 00000000 at 6 IRQ POLL (stmmac-0:06) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.168317] eth0: PHY ID 00000000 at 7 IRQ POLL (stmmac-0:07) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.174026] eth0: PHY ID 00000000 at 8 IRQ POLL (stmmac-0:08) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.179722] eth0: PHY ID 00000000 at 9 IRQ POLL (stmmac-0:09) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.185430] eth0: PHY ID 00000000 at 10 IRQ POLL (stmmac-0:0a) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.191219] eth0: PHY ID 00000000 at 11 IRQ POLL (stmmac-0:0b) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.197002] eth0: PHY ID 00000000 at 12 IRQ POLL (stmmac-0:0c) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.202797] eth0: PHY ID 00000000 at 13 IRQ POLL (stmmac-0:0d) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.208579] eth0: PHY ID 00000000 at 14 IRQ POLL (stmmac-0:0e) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.214374] eth0: PHY ID 00000000 at 15 IRQ POLL (stmmac-0:0f) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.220163] eth0: PHY ID 00000000 at 16 IRQ POLL (stmmac-0:10) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.225945] eth0: PHY ID 00000000 at 17 IRQ POLL (stmmac-0:11) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.231740] eth0: PHY ID 00000000 at 18 IRQ POLL (stmmac-0:12) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.237524] eth0: PHY ID 00000000 at 19 IRQ POLL (stmmac-0:13) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.243317] eth0: PHY ID 00000000 at 20 IRQ POLL (stmmac-0:14) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.249100] eth0: PHY ID 00000000 at 21 IRQ POLL (stmmac-0:15) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.254896] eth0: PHY ID 00000000 at 22 IRQ POLL (stmmac-0:16) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.260683] eth0: PHY ID 00000000 at 23 IRQ POLL (stmmac-0:17) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.266467] eth0: PHY ID 00000000 at 24 IRQ POLL (stmmac-0:18) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.272262] eth0: PHY ID 00000000 at 25 IRQ POLL (stmmac-0:19) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.278045] eth0: PHY ID 00000000 at 26 IRQ POLL (stmmac-0:1a) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.283840] eth0: PHY ID 00000000 at 27 IRQ POLL (stmmac-0:1b) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.289622] eth0: PHY ID 00000000 at 28 IRQ POLL (stmmac-0:1c) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.295416] eth0: PHY ID 00000000 at 29 IRQ POLL (stmmac-0:1d) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.301205] eth0: PHY ID 00000000 at 30 IRQ POLL (stmmac-0:1e) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.306988] eth0: PHY ID 00000000 at 31 I POLL (stmmac-0:1f) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.313044] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver -/bin/sh: syntax error: unexpected "(" 366240] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.372950] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.380103] usb usb1: Product: EHCI Host Controller [ 1.384923] usb usb1: Manufacturer: Linux 3.10.93 ehci_hcd [ 1.390383] usb usb1: SerialNumber: e066c000.usb [ 1.395860] hub 1-0:1.0: USB hub found [ 1.399534] hub 1-0:1.0: 1 port detected [ 1.403709] ehci-platform e066d000.usb: EHCI Host Controller [ 1.409280] ehci-platform e066d000.usb: new USB bus registered, assigned bus number 2 [ 1.417194] ehci-platform e066d000.usb: irq 94, io mem 0xe066d000 [ 1.423247] ata1: SATA PHY offline [ 1.426571] ata1: SATA link down (SStatus 0 SControl 300) [ 1.440078] ehci-platform e066d000.usb: USB 2.0 started, EHCI 1.00 [ 1.446233] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.452945] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.460101] usb usb2: Product: EHCI Host Controller [ 1.464921] usb usb2: Manufacturer: Linux 3.10.93 ehci_hcd [ 1.470375] usb usb2: SerialNumber: e066d000.usb [ 1.475761] hub 2-0:1.0: USB hub found [ 1.479435] hub 2-0:1.0: 1 port detected [ 1.484046] usbcore: registered new interface driver usb-storage [ 1.490439] usbcore: registered new interface driver usbserial [ 1.497743] usbcore: registered new interface driver usbhid [ 1.503283] usbhid: USB HID core driver [ 1.507270] TCP: cubic registered [ 1.510517] NET: Registered protocol family 17 [ 1.515327] Key type dns_resolver registered [ 1.519602] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 3 [ 1.527137] ThumbEE CPU extension supported. [ 1.532426] ### dt-test ### No testcase data in device tree; not running tests [ 1.730080] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1.881640] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 1.888259] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.895349] usb 1-1: Product: USB2.0 Hub [ 1.900632] hub 1-1:1.0: USB hub found [ 1.904641] hub 1-1:1.0: 4 ports detected [ 2.600058] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 2.752190] usb 2-1: New USB device found, idVendor=174c, idProduct=5136 [ 2.758805] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 2.765890] usb 2-1: Product: AS2105 [ 2.769415] usb 2-1: Manufacturer: ASMedia [ 2.773483] usb 2-1: SerialNumber: 00000000000000000000 [ 2.779840] usb-storage 2-1:1.0: USB Mass Storage device detected [ 2.786109] scsi1 : usb-storage 2-1:1.0 [ 3.791054] scsi 1:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6 [ 3.800888] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 4.624990] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.633348] sd 1:0:0:0: [sda] Write Protect is off [ 4.638842] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.673503] sda: sda1 [ 4.679350] sd 1:0:0:0: [sda] Attached SCSI disk [ 6.959898] VFS: Mounted root (jffs2 filesystem) on device 31:0. [ 6.967185] devtmpfs: mounted [ 6.970351] Freeing unused kernel memory: 184K (80659000 - 80687000) init started: BusyBox v1.30.1 (2019-06-22 15:09:50 CEST) [ 7.853314] NET: Registered protocol family 10 try to mount /dev/mtdblock1 to /var [ 8.286337] jffs2: Empty flash at 0x01088ad8 ends at 0x01089000 starting /etc/init.d/S02loadmodules ... Sat Jan 1 00:00:00 CET 2000 Creating device node for cs_display Running insmod now ....... Driver modules loaded, please start the app now... Creating device node for KAL Creating device node for notifyq CST-25BAB7:/# [ 1.319464] ehci-platformplatform driver sh: missing ] CST-25BAB7:/# [ 1.324938] ehci-platform e066c000.usb: EHCI Host Controller sh: missing ] CST-25BAB7:/# [ 1.330565] ehci-platform e066c000.usbus registered, assigned b us number 1 sh: missing ] CST-25BAB7:/# [ 1.338383] ehci-platform e066c000.usb: irq 93, io mem 0xe066c0 00 sh: missing ] CST-25BAB7:/# [ 1.360091] e-platform e066c000.usb: USB 2.0 started, EHCI 1.00 sh: missing ] CST-25BAB7:/# [ 1.366240] usb usb1: New USB device found, idVendor=1d6b, idPr oduct=0002 sh: missing ] CST-25BAB7:/# [ 1.372950] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 sh: missing ] CST-25BAB7:/# [ 1.380103] usb usb1: Product: EHCI Host Controller sh: missing ] CST-25BAB7:/# [ 1.384923] usb usb1: Manufacturer: Linux 3.10.93 ehci_hcd sh: missing ] CST-25BAB7:/# [ 1.390383] usb usb1: SerialNumber: e066c000.usb sh: missing ] CST-25BAB7:/# [ 1.395860] hub 1-0:1.0: USB hub found sh: missing ] CST-25BAB7:/# [ 1.399534] hub 1-0:1.0: 1 port detected sh: missing ] CST-25BAB7:/# [ 1.403709] ehci-platform e066d000.usb: EHCI Host Controller sh: missing ] CST-25BAB7:/# [ 1.409280] ehci-platform e066d000.usb: new USB bus registered, assigned bus number 2 sh: missing ] CST-25BAB7:/# [ 1.417194] ehci-platform e066d000.usb: irq 94, io mem 0xe066d0 00 sh: missing ] CST-25BAB7:/# [ 1.423247] ata1: SATA PHY offline sh: missing ] CST-25BAB7:/# [ 1.426571] ata1: SATA link down (SStatus 0 SControl 300) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 1.440078] ehci-platform e066d000.usb: USB 2.0 started, EHCI 1 .00 sh: missing ] CST-25BAB7:/# [ 1.446233] usb usb2: New USB device found, idVendor=1d6b, idPr oduct=0002 sh: missing ] CST-25BAB7:/# [ 1.452945] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 sh: missing ] CST-25BAB7:/# [ 1.460101] usb usb2: Product: EHCI Host Controller sh: missing ] CST-25BAB7:/# [ 1.464921] usb usb2: Manufacturer: Linux 3.10.93 ehci_hcd sh: missing ] CST-25BAB7:/# [ 1.470375] usb usb2: SerialNumber: e066d000.usb sh: missing ] CST-25BAB7:/# [ 1.475761] hub 2-0:1.0: USB hub found sh: missing ] CST-25BAB7:/# [ 1.479435] hub 2-0:1.0: 1 port detected sh: missing ] CST-25BAB7:/# [ 1.484046] usbcore: registered new interface driver usb-storag e sh: missing ] CST-25BAB7:/# [ 1.490439] usbcore: registered new interface driver usbserial sh: missing ] CST-25BAB7:/# [ 1.497743] usbcore: registered new interface driver usbhid sh: missing ] CST-25BAB7:/# [ 1.503283] usbhid: USB HID core driver sh: missing ] CST-25BAB7:/# [ 1.507270] TCP: cubic registered sh: missing ] CST-25BAB7:/# [ 1.510517] NET: Registered protocol family 17 sh: missing ] CST-25BAB7:/# [ 1.515327] Key type dns_resolver registered sh: missing ] CST-25BAB7:/# [ 1.519602] VFP support v0.3: implementor 41 architecture 3 par t 30 variant 9 rev 3 sh: missing ] CST-25BAB7:/# [ 1.527137] ThumbEE CPU extension supported. sh: missing ] CST-25BAB7:/# [ 1.532426] ### dt-test ### No testcase data in device tree; no t running tests sh: missing ] CST-25BAB7:/# [ 1.730080] usb 1-1: new high-speed USB device number 2 using e hci-platform sh: missing ] CST-25BAB7:/# [ 1.881640] usb 1-1: New USB device found, idVendor=05e3, idPro duct=0608 sh: missing ] CST-25BAB7:/# [ 1.888259] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 sh: missing ] CST-25BAB7:/# [ 1.895349] usb 1-1: Product: USB2.0 Hub sh: missing ] CST-25BAB7:/# [ 1.900632] hub 1-1:1.0: USB hub found sh: missing ] CST-25BAB7:/# [ 1.904641] hub 1-1:1.0: 4 ports detected sh: missing ] CST-25BAB7:/# [ 2.600058] usb 2-1: new high-speed USB device number 2 using e hci-platform sh: missing ] CST-25BAB7:/# [ 2.752190] usb 2-1: New USB device found, idVendor=174c, idPro duct=5136 sh: missing ] CST-25BAB7:/# [ 2.758805] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 sh: missing ] CST-25BAB7:/# [ 2.765890] usb 2-1: Product: AS2105 sh: missing ] CST-25BAB7:/# [ 2.769415] usb 2-1: Manufacturer: ASMedia sh: missing ] CST-25BAB7:/# [ 2.773483] usb 2-1: SerialNumber: 00000000000000000000 sh: missing ] CST-25BAB7:/# [ 2.779840] usb-storage 2-1:1.0: USB Mass Storage device detect ed sh: missing ] CST-25BAB7:/# [ 2.786109] scsi1 : usb-storage 2-1:1.0 sh: missing ] CST-25BAB7:/# [ 3.791054] scsi 1:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6 sh: missing ] CST-25BAB7:/# [ 3.800888] sd 1:0:0:0: Attached scsi generic sg0 type 0 sh: missing ] CST-25BAB7:/# [ 4.624990] sd 1:0:0:0: [sda] 1953525168 512-byte logical block s: (1.00 TB/931 GiB) -/bin/sh: syntax error: unexpected "(" CST-25BAB7:/# [ 4.633348] sd 1:0:0:0: [sda] Write Protect is off sh: missing ] CST-25BAB7:/# [ 4.638842] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 4.673503] sda: sda1 > [ 4.679350] sd 1:0:0:0: [sda] Attached SCSI disk > [ 6.959898] VFS: Mounted root (jffs2 filesystem) on device 31:0. > [ 6.967185] devtmpfs: mounted > [ 6.970351] Freeing unused kernel memory: 184K (80659000 - 80687000) > init started: BusyBox v1.30.1 (2019-06-22 15:09:50 CEST) > [ 7.853314] NET: Registered protocol family 10 > try to mount /dev/mtdblock1 to /var > [ 8.286337] jffs2: Empty flash at 0x01088ad8 ends at 0x01089000 > starting /etc/init.d/S02loadmodules ... > Sat Jan 1 00:00:00 CET 2000 > Creating device node for cs_display > Running insmod now ....... > Driver modules loaded, please start the app now... > Creating device node for KAL > Creating device node for notifyq > Creating device node for platform > Creating d > Creating device node for standby > Creating device node for video > Creating device node for audio > Creating device node for pvr > Creating device node for ci > Creating device node for cs_control > Creating device node for cs_ir > Creating device node for fb > starting /etc/init.d/S04mdev ... > [logoview] done with Timeout... > error connect socket /tmp/neutrino.sock: No such file or directory > starting /etc/init.d/S05mount ... > starting /etc/init.d/S50hostname ... > starting /etc/init.d/S51networking ... > Configuring network interfaces... Starting wlan0 > Failed to connect to wpa_supplicant - wpa_ctrl_open: Success > Could not read interface wlan0 flags: No such device > Failed to initialize driver interface > done. > starting /etc/init.d/S52syslogd ... > Jan 1 00:00:14 CST-25BAB7 syslog.info syslogd started: BusyBox v1.30.1 > starting /etc/init.d/S60autofs ... > 1 Jan 00:00:14 ntpdate[1137]: ntpdate 4.2.8p6@1.3265-o (1) > starting > starting /etc/init.d/S80dvdreadfs ... > starting /etc/init.d/S90inetd ... > starting /etc/init.d/S96nfsd ... > starting /var/etc/init.d/S9T_tuxcald ... > starting /var/etc/init.d/S9T_tuxmaild ... > Jan 1 00:00:15 CST-25BAB7 daemon.info : starting pid 1173, tty '': '/etc/init .d/start_neutrino' > > Please press Enter to activate this console. /var/plugins/operations camd_init > /var/plugins/operations cardserver_start > starte doscam > Sat Jan 1 00:00:16 CET 2000 > /var/plugins/operations camd_start > /var/plugins/operations rezap > 30 Dec 12:56:21 ntpdate[1137]: step time server 130.133.1.10 offset 631025765. 066037 sec > /var/plugins/operations: line 262: 6: not found > [frontend.cpp:Open:284] /dev/dvb/adapter0/frontend2: No such file or directory > [frontend.cpp:Open:284] /dev/dvb/adapter0/frontend3: No such file or directory > [frontend.cpp:Open:284] /dev/dvb/adapter1/frontend0: No such file or directory > [frontend.cpp:Open:284] /dev/dvb/adapter1/frontend1: No such file or directory > [frontend.cpp:Open:284] /dev/dvb/adapter1/frontend2: No such file or directory > [frontend.cpp:Open:284] /dev/dvb/adapter1/frontend3: No such file or directory > [frontend.cpp:Open:284] /dev/dvb/adapter2/frontend0: No such file or directory > [frontend.cpp:Open:284] /dev/dvb/adapter2/frontend1: No such file or directory > [frontend.cpp:Open:284] /dev/dvb/adapter2/frontend2: No such file or directory > [frontend.cpp:Open:284] /dev/dvb/adapter2/frontend3: No such file or directory > [frontend.cpp:Open:284] /dev/dvb/adapter3/frontend0: No such file or directory > [frontend.cpp:Open:284] /dev/dvb/adapter3/frontend1: No such file or directory > [frontend.cpp:Open:284] /dev/dvb/adapter3/frontend2: No such file or directory > [frontend.cpp:Open:284] /dev/dvb/adapter3/frontend3: No such file or directory > MON: The POD Monitor task has started. Version = 01, Release = 00, Subrelease = 01, PID: 1213 > MON: Initializing > slot->inbound_queue : 76076070 > slot->outbound_queue: 76075f18 > xport_command_queue: 76075d00 > MON: Start resource providers... > XPORT: POD Transport task started. PID: 1213 > RM: Resource Manager thread started. PID: 1213 > XPORT: transport connection #1 set to Idle > LINK: POD link task started with arg=0x00000000, PID: 1213 > MON: Starting 9 resource(s). > MON starting 9 resources finished > MON after BR_POD_mon_start_rps > POD timer thread PID: 1213 > comming in add resource provider, rid=10041 > RM before wait for db ready, pid: 1213 > APPMMI thread starts, PID: 1213 > UPGRADE thread is started, PID: 1213 > comming in add resource provider, rid=8e1001 > HOSTCTRL thread is started, PID: 1213 > comming in add resource provider, rid=200041 > SYSTIME resource start, PID: 1213 > comming in add resource provider, rid=240041 > SYSTIME RP: System Time main loop processing started. > CA resource provider started with arg=0x00000000, PID: 1213 > APPINFO thread starts, PID: 1213 > comming in add resource provider, rid=20043 > APPINFO RP: resource provider is added, resource ID :0x20043 > APPINFO RP: APPINFO resource provider main loop processing started. > RM after wait for db ready, pid: 1213 > HOSTLANG_CNTY thread is started, PID: 1213 > comming in add resource provider, rid=8d1001 > MMI thread is started, PID: 1213 > comming in add resource provider, rid=400041 > CP resource start, PID: 1213 > CP thread get delay time 0(s) > CP: Start of initialization... > HOSTCTRL RP: resource provider is added > ciappReportModuleStatus: status 9, gCardStatus: 0 > PHYS-CI+: cs_ci_init_controller called > comming in add resource provider, rid=410041 > UPGRADE RP: resource provider is added > UPGRADE RP: UPGRADE resource provider main loop processing started. > RM: Resource Manager message processing started. > comming in add resource provider, rid=30041 > CA RP: Resource Provider main loop processing started. > HOSTLANG_CNTY RP: resource provider is added > MON after wait event > MON: Wait for all required resource providers to sign on.... 2019-12-30 12:56:34.088 [sectionsd] commandserviceStopped done 2019-12-30 12:56:34.130 [sectionsd] commandserviceChanged: Service change to 48d200020085000a demux #0 2019-12-30 12:56:34.302 [sectionsd] timeThread: get DVB time ch 0x00020085000a rc: -1 neutrino_sets_time 0 2019-12-30 12:56:34.309 [sectionsd] timeThread: Time set FAILED (enabled: ntp 0 dvb 1) sh: you need to specify whom to kill 2019-12-30 12:56:35.030 [sectionsd] commandserviceChanged: Service change to 48d200020085000a demux #0 2019-12-30 12:56:35.070 [sectionsd] commandserviceChanged: Service change to 48d200020085000a demux #0 2019-12-30 12:56:35.344 [sectionsd] timeThread: get DVB time ch 0x00020085000a (isOpen 1) 2019-12-30 12:56:37.935 [sectionsd] timeThread: get DVB time ch 0x00020085000a rc: 8 neutrino_sets_time 0 2019-12-30 12:56:37.944 [sectionsd] SIsectionTIME::parse: TDT time: Mon Dec 30 12:56:36 2019 2019-12-30 12:56:37.949 [sectionsd] timeThread: timediff -1948979, current: 30.12.2019 12:56:37, dvb: Mon Dec 30 12:56:36 2019 2019-12-30 12:56:36.000 [sectionsd] cnThread::run:: time set: Mon Dec 30 12:56:36 2019 2019-12-30 12:56:36.006 [sectionsd] freeSatThread::run:: time set: Mon Dec 30 12:56:36 2019 2019-12-30 12:56:36.011 2019-12-30 12:56:36.011 [sectionsd] timeThread: Time set via DVB (TDT), going to sleep for 5 seconds. [sectionsd] eitThread::run:: time set: Mon Dec 30 12:56:36 2019 --- > rezapping 2019-12-30 12:56:36.732 [sectionsd] addEvent: ch 00020085000a running 0 (next) got_CN 0 2019-12-30 12:56:37.681 [sectionsd] addEvent: ch 00020085000a running 4 (curr) got_CN 2 2019-12-30 12:56:37.854 [sectionsd] commandserviceChanged: Service change to 48d200020085000a demux #0 2019-12-30 12:56:37.898 [sectionsd] cnThread: eit update filter, ch 0x00020085000a, current ver 0x0c got events 3 (not active) 2019-12-30 12:56:41.050 [sectionsd] timeThread: get DVB time ch 0x00020085000a (isOpen 1) 2019-12-30 12:56:42.362 [sectionsd] timeThread: get DVB time ch 0x00020085000a rc: 29 neutrino_sets_time 0 2019-12-30 12:56:42.372 [sectionsd] SIsectionTIME::parse: TOT time: Mon Dec 30 12:56:42 2019 2019-12-30 12:56:42.376 [sectionsd] timeThread: timediff -376291, current: 30.12.2019 12:56:42, dvb: Mon Dec 30 12:56:42 2019 2019-12-30 12:56:42.389 [sectionsd] difference is < 120s, using adjtime(0, -376291). oldd(0, 0) 2019-12-30 12:56:42.399 [sectionsd] timeThread: Time set via DVB (TOT), going to sle> APPMMI RP: resource provider is added > MMI RP: resource provider is added > HOSTCTRL RP: HOSTCTRL resource provider main loop processing started. > CP nvram: Root certificate file is for production > HOSTLANG_CNTY RP: HOSTLANG_CNTY resource provider main loop processing started . > LINK: hard reset complete. > LINK: slot #0 state = BR_POD_SLOT_NOT_INIT > MMI RP: MMI resource provider main loop processing started. > APPMMI RP: APPMMI resource provider main loop processing started. > dump mbuf.... > LINK: slot #0 state = BR_POD_SLOT_CARD_NOT_PRESENT > RM: recvd LINK_STATUS tag(0x42), len=8 > RM: No host-pod interface > RM: close all connections on slot 0 > LINK: after bypass card > dump mbuf.... > ciappReportModuleStatus: status 0, gCardStatus: 0 > dump mbuf.... > no CICAM brand id extension. > comming in add resource provider, rid=8c1001 > RM: recvd RM_RESOURCES_CHANGED tag(0x43), len=8 > CP RP: resource provider is added > CP: Resource Provider main loop processing started. > 2019-12-30 12:56:32.396 [sectionsd] start > 2019-12-30 12:56:32.522 [sectionsd] starting > 2019-12-30 12:56:32.689 [sectionsd] timeThread::run:: starting, pid 1213 (1672 021168) > 2019-12-30 12:56:32.796 [sectionsd] eitThread::run:: starting, pid 1213 (16699 24016) > 2019-12-30 12:56:32.811 [sectionsd] cnThread::run:: starting, pid 1213 (166782 6864) > 2019-12-30 12:56:32.821 [sectionsd] timeThread: get DVB time ch 0x000000000000 (isOpen 1) > 2019-12-30 12:56:32.851 [sectionsd] freeSatThread::run:: starting, pid 1213 (1 665729712) > [ConfigFile] Unable to open file /var/tuxbox/config/bookmarks for reading. > 2019-12-30 12:56:34.040 [sectionsd] commandserviceStopped > 2019-12-30 12:56:34.085 [sectionsd] cnThread: stop eit update filter (not acti ve) > 2019-12-30 12:56:34.088 [sectionsd] commandserviceStopped done > 2019-12-30 12:56:34.130 [sectionsd] commandserviceChanged: Service change to 4 8d200020085000a demux #0 > 2019-12-30 12:56:34.302 [sectionsd] timeThread: get DVB time ch 0x00020085000a rc: -1 neutrino_sets_time 0 > 2019-12-30 12:56:34.309 [sectionsd] timeThread: Time set FAILED (enabled: ntp 0 dvb 1) > sh: you need to specify whom to kill > 2019-12-30 12:56:35.030 [sectionsd] commandserviceChanged: Service change to 4 8d200020085000a demux #0 > 2019-12-30 12:56:35.070 [sectionsd] commandserviceChanged: Service change to 4 8d200020085000a demux #0 > 2019-12-30 12:56:35.344 [sectionsd] timeThread: get DVB time ch 0x00020085000a (isOpen 1) > 2019-12-30 12:56:37.935 [sectionsd] timeThread: get DVB time ch 0x00020085000a rc: 8 neutrino_sets_time 0 > 2019-12-30 12:56:37.944 [sectionsd] SIsectionTIME::parse: TDT time: Mon Dec 30 12:56:36 2019 > 2019-12-30 12:56:37.949 [sectionsd] timeThread: timediff -1948979, current: 30 .12.2019 12:56:37, dvb: Mon Dec 30 12:56:36 2019 > > 2019-12-30 12:56:36.000 [sectionsd] cnThread::run:: time set: Mon Dec 30 12:56 :36 2019 > > 2019-12-30 12:56:36.006 [sectionsd] freeSatThread::run:: time set: Mon Dec 30 12:56:36 2019 > > 2019-12-30 12:56:36.011 2019-12-30 12:56:36.011 [sectionsd] timeThread: Time s et via DVB (TDT), going to sleep for 5 seconds. > [sectionsd] eitThread::run:: time set: Mon Dec 30 12:56:36 2019 > > --- > rezapping > 2019-12-30 12:56:36.732 [sectionsd] addEvent: ch 00020085000a running 0 (next) got_CN 0 > 2019-12-30 12:56:37.681 [sectionsd] addEvent: ch 00020085000a running 4 (curr) got_CN 2 > 2019-12-30 12:56:37.854 [sectionsd] commandserviceChanged: Service change to 4 8d200020085000a demux #0 > 2019-12-30 12:56:37.898 [sectionsd] cnThread: eit update filter, ch 0x00020085 000a, current ver 0x0c got events 3 (not active) > 2019-12-30 12:56:41.050 [sectionsd] timeThread: get DVB time ch 0x00020085000a (isOpen 1) > 2019-12-30 12:56:42.362 [sectionsd] timeThread: get DVB time ch 0x00020085000a rc: 29 neutrino_sets_time 0 > 2019-12-30 12:56:42.372 [sectionsd] SIsectionTIME::parse: TOT time: Mon Dec 30 12:56:42 2019 > 2019-12-30 12:56:42.376 [sectionsd] timeThread: timediff -376291, current: 30. 12.2019 12:56:42, dvb: Mon Dec 30 12:56:42 2019 > > 2019-12-30 12:56:42.389 [sectionsd] difference is < 120s, using adjtime(0, -37 6291). oldd(0, 0) > 2019-12-30 12:56:42.399 [sectionsd] timeThread: Time set via DVB (TOT), going to sleep for 1800 seconds. Mfg Skyline666 bearbeitet 30. Dezember 2019 von Gandal Bitte Spoiler-Tag's verwenden, Danke. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Don de Deckelwech Geschrieben 30. Dezember 2019 Melden Share Geschrieben 30. Dezember 2019 Hi, flashe mal neu, das Bootlog sieht nicht wirklich gesund aus. Ciao, DdD. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
skyline666 Geschrieben 30. Dezember 2019 Autor Melden Share Geschrieben 30. Dezember 2019 vor einer Stunde schrieb Don de Deckelwech: Hi, flashe mal neu, das Bootlog sieht nicht wirklich gesund aus. Ciao, DdD. Meinst Du das ganze Image oder nur einen Teil wie den Kernel etc? Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Admin Gandalf Geschrieben 30. Dezember 2019 Admin Melden Share Geschrieben 30. Dezember 2019 Wie @DdD schon festgestellt hat sieht das Bootlog nicht wirklich gut aus, nochmal Flashen ( Komplettes Image ) und dann testen wie empfohlen wäre auch mein Tip gewesen. Das dadurch das HDMI Problem behoben wird glaube ich allerdings nicht aber mal abwarten. Sollte es nach dem neuerlichen Flashen noch immer Probleme mit dem HDMI Ausgang geben dann ist der Chip hier defekt. https://www.onsemi.com/pub/Collateral/CM2020-00TR-D.PDF Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
skyline666 Geschrieben 30. Dezember 2019 Autor Melden Share Geschrieben 30. Dezember 2019 (bearbeitet) vor einer Stunde schrieb skyline666: Meinst Du das ganze Image oder nur einen Teil wie den Kernel etc? Und hier nach einem kompletten Online Image Flash! Die Einstellungen sind aber alle übernommen worden. Damit Favoriten und Videoeinstellungen alle identisch. Starting Microloader ASM built on Mar 28 2016 18:03:24... Initializing PLLs... Initializing Clocks.. Initializing DDR PLLs/Clocks... Initializing DDR controller... Initializing data section... Initializing stack ptr... Starting Microloader C... Chip: KRONOS Found Internal MYSTI110 PHY on GMAC0 Checking for Guide button press ... GCS in ISA MODE GCS: SFC DEVICE SETUP COMPLETE BOX MAC OK! BOX: Type: ZEE Rev: 75500100 Setting up default ATAG list... Jumping to U-Boot ... BOOT_TIME: 599 ms since POR -------------------------------------------------------------------------------- | U-Boot 2009.08-00068-g69a4049 (Dec 10 2015 - 14:51:59) CST HDx | |------------------------------------------------------------------------------| | Chipset information | | Vendor: Entropic Type: KRONOS Revision: B0 Fuses: 00010001 | |------------------------------------------------------------------------------| | Clock information | | *** not available yet *** | |------------------------------------------------------------------------------| | Frontpanel information | | Vendor: CST Version: 3.3 Display: OLED (128 x 64 px) | |------------------------------------------------------------------------------| | Memory configuration | | Start | End | Type | Description | |----------+----------+---------+----------------------------------------------| | 00000000 | 1FFFFFFF | RAM | System main memory bank #0 (512M) | | D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 ( 4M / 64K x 64) | *** Warning - bad CRC or SFC, using default environment | 00000000*| 1FFFFFFF*| NAND | Toshiba NAND 512MiB 3,3V 8-bit | |------------------------------------------------------------------------------| | Network configuration | | MAC: LIP 6300 address: 00-C5-5C-25-BA-B7 | -------------------------------------------------------------------------------- Hit any key to stop autoboot: 0 SFC read: offset 0x100000, size 0x300000 3145728 bytes read: OK ## Booting kernel from Legacy Image at 01000000 ... Image Name: Coolstream Kernel (compressed) Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2981377 Bytes = 2.8 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 3.10.93 (image@server) (gcc version 6.3.1 20170109 (crosstool-NG 1) ) #1 SMP Sun Apr 15 15:27:43 CEST 2018 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio n cache [ 0.000000] Machine: Entropic Kronos STB Platform with FDT, model: CoolStream HD2 Kronos STB [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] Early platform io descriptors mapping... [ 0.000000] PERCPU: Embedded 7 pages/cpu @80da8000 s5952 r8192 d14528 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 130048 [ 0.000000] Kernel command line: noinitrd console=ttyS0,115200n8 mtdparts=e06 32000.flash_sfc:256k@0k(uldr),512k@256k(u-boot),128k@768k(env),128k@896k(spare), -(kernel);e0631000.flash_nand:256m@0k(root0),32m@256m(var),-(root1) root=mtd:roo t0 rootfstype=jffs2 rw [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 512MB = 512MB total [ 0.000000] Memory: 247144k/247144k available, 277144k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xa0800000 - 0xff000000 (1512 MB) [ 0.000000] lowmem : 0x80000000 - 0xa0000000 ( 512 MB) [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ 0.000000] .text : 0x80008000 - 0x806584f8 (6466 kB) [ 0.000000] .init : 0x80659000 - 0x80687740 ( 186 kB) [ 0.000000] .data : 0x80688000 - 0x806c8e60 ( 260 kB) [ 0.000000] .bss : 0x806c8e60 - 0x806e3224 ( 105 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:350 [ 0.000000] GIC CPU mask not found - kernel will fail to boot. [ 0.000000] GIC CPU mask not found - kernel will fail to boot. [ 0.000000] Cortex A9 frequency at 600 MHz [ 0.000000] Initializing Cortex A9 Global Timer at Vir:0xFEA00200, using, at Freq:300 MHz [ 0.000000] sched_clock: 32 bits at 300MHz, resolution 3ns, wraps every 14316 ms [ 0.000000] smp_twd: clock not found -2 [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [ttyS0] enabled [ 0.249863] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) [ 0.292752] pid_max: default: 32768 minimum: 301 [ 0.297555] Mount-cache hash table entries: 512 [ 0.303979] CPU: Testing write buffer coherency: ok [ 0.309071] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.314697] Setting up static identity map for 0x803c47a0 - 0x803c47f8 [ 0.321224] L310 cache controller enabled [ 0.325144] l2x0: 8 ways, CACHE_ID 0x410004c7, AUX_CTRL 0x32421001, Cache siz e: 131072 B [ 0.333771] Brought up 1 CPUs [ 0.336653] SMP: Total of 1 processors activated (1196.85 BogoMIPS). [ 0.342974] CPU: All CPU(s) started in SVC mode. [ 0.348241] devtmpfs: initialized [ 0.356601] NET: Registered protocol family 16 [ 0.361716] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.475090] GMAC0: active interface is 1 [ 0.479081] ChipID=0x1000 ChipRevID=0x100 [ 0.483178] nx_dmac: Registered with 8 channels [ 0.510220] bio: create slab <bio-0> at 0 [ 0.515414] GPIO: base febab000 (phys e06ab000) [ 0.520005] GPIO: base feb69000 (phys e0669000) [ 0.526384] SCSI subsystem initialized [ 0.531504] usbcore: registered new interface driver usbfs [ 0.537081] usbcore: registered new interface driver hub [ 0.542743] usbcore: registered new device driver usb [ 0.548175] pps_core: LinuxPPS API ver. 1 registered [ 0.553101] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti <giometti@linux.it> [ 0.562385] PTP clock support registered [ 0.567952] cfg80211: Calling CRDA to update world regulatory domain [ 0.575759] Switching to clocksource arm_global_timer [ 0.599661] NET: Registered protocol family 2 [ 0.604972] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.612059] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.618469] TCP: Hash tables configured (established 4096 bind 4096) [ 0.624815] TCP: reno registered [ 0.627954] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.633802] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.640287] NET: Registered protocol family 1 [ 0.645031] RPC: Registered named UNIX socket transport module. [ 0.650873] RPC: Registered udp transport module. [ 0.655507] RPC: Registered tcp transport module. [ 0.660180] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.666735] PM: STB Platform power mgmt initialization. [ 0.797799] NFS: Registering the id_resolver key type [ 0.802863] Key type id_resolver registered [ 0.806942] Key type id_legacy registered [ 0.810970] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.817333] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.825287] msgmni has been set to 482 [ 0.830388] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 52) [ 0.837679] io scheduler noop registered [ 0.841625] io scheduler deadline registered [ 0.846480] io scheduler cfq registered (default) [ 0.851842] e06b2000.serial: ttyS0 at MMIO 0xe06b2000 (irq = 47) is a uart-ip 3106 [ 0.866249] loop: module loaded [ 0.870454] ahci-stb e0638000.sata: unable to find phy [ 0.875503] SATA: Enable mpll_ss_en (rd_val=0x571185, wr_val=0x5711a5) [ 0.882039] SATA: Enable rx_term_en0 (rd_val=0x277, wr_val=0x277) [ 0.888052] ahci-stb e0638000.sata: SSS flag set, parallel bus scan disabled [ 0.895088] ahci-stb e0638000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x 1 impl platform mode [ 0.903874] ahci-stb e0638000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 0.913332] ata4294967295: SATA PHY offline [ 0.918344] scsi0 : ahci_platform [ 0.922494] ata1: SATA max UDMA/133 mmio [mem 0xe0638000-0xe0638fff] port 0x1 00 irq 39 [ 0.932053] NAND device: Manufacturer ID: 0x98, Chip ID: 0xdc (Toshiba NAND 5 12MiB 3,3V 8-bit), 512MiB, page size: 2048, OOB size: 64 [ 0.944476] Bad block table found at page 262080, version 0x01 [ 0.951044] Bad block table found at page 262016, version 0x01 [ 0.957246] nand_read_bbt: bad block at 0x00001cf60000 [ 0.962304] nand_read_bbt: bad block at 0x00001cfa0000 [ 0.967432] 3 cmdlinepart partitions found on MTD device e0631000.flash_nand [ 0.974389] Creating 3 MTD partitions on "e0631000.flash_nand": [ 0.980262] 0x000000000000-0x000010000000 : "root0" [ 0.986772] 0x000010000000-0x000012000000 : "var" [ 0.992856] 0x000012000000-0x000020000000 : "root1" [ 1.001170] JEDEC ID = 0x1c3016 , Extended Device ID = 0x1c30 [ 1.006912] nx_sfc e0632000.flash_sfc: en25q32 (4096 Kbytes) [ 1.012568] 5 cmdlinepart partitions found on MTD device e0632000.flash_sfc [ 1.019425] Creating 5 MTD partitions on "e0632000.flash_sfc": [ 1.025242] 0x000000000000-0x000000040000 : "uldr" [ 1.031596] 0x000000040000-0x0000000c0000 : "u-boot" [ 1.037898] 0x0000000c0000-0x0000000e0000 : "env" [ 1.044025] 0x0000000e0000-0x000000100000 : "spare" [ 1.050476] 0x000000100000-0x000000400000 : "kernel" [ 1.057173] tun: Universal TUN/TAP device driver, 1.6 [ 1.062191] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.068898] DWMAC1000 [ 1.071203] stmmac - user ID: 0x36, Synopsys ID: 0x36 [ 1.076179] Ring mode enabled [ 1.079204] DMA HW capability register supported [ 1.083713] Enhanced/Alternate descriptors [ 1.088016] Enabled extended descriptors [ 1.092001] RX Checksum Offload Engine supported (type 2) [ 1.097434] TX Checksum insertion supported [ 1.101674] Wake-Up On Lan supported [ 1.105342] Enable RX Mitigation via HW Watchdog Timer [ 1.125383] libphy: stmmac: probed [ 1.128702] eth0: PHY ID 0293c412 at 0 IRQ POLL (stmmac-0:00) active [ 1.135080] eth0: PHY ID 00000000 at 1 IRQ POLL (stmmac-0:01) [ 1.140748] eth0: PHY ID 00000000 at 2 IRQ POLL (stmmac-0:02) [ 1.146419] eth0: PHY ID 00000000 at 3 IRQ POLL (stmmac-0:03) [ 1.152150] eth0: PHY ID 00000000 at 4 IRQ POLL (stmmac-0:04) [ 1.157824] eth0: PHY ID 00000000 at 5 IRQ POLL (stmmac-0:05) [ 1.163557] eth0: PHY ID 00000000 at 6 IRQ POLL (stmmac-0:06) [ 1.169228] eth0: PHY ID 00000000 at 7 IRQ POLL (stmmac-0:07) [ 1.174955] eth0: PHY ID 00000000 at 8 IRQ POLL (stmmac-0:08) [ 1.180659] eth0: PHY ID 00000000 at 9 IRQ POLL (stmmac-0:09) [ 1.186336] eth0: PHY ID 00000000 at 10 IRQ POLL (stmmac-0:0a) [ 1.192146] eth0: PHY ID 00000000 at 11 IRQ POLL (stmmac-0:0b) [ 1.197913] eth0: PHY ID 00000000 at 12 IRQ POLL (stmmac-0:0c) [ 1.203729] eth0: PHY ID 00000000 at 13 IRQ POLL (stmmac-0:0d) [ 1.209490] eth0: PHY ID 00000000 at 14 IRQ POLL (stmmac-0:0e) [ 1.215302] eth0: PHY ID 00000000 at 15 IRQ POLL (stmmac-0:0f) [ 1.221092] eth0: PHY ID 00000000 at 16 IRQ POLL (stmmac-0:10) [ 1.226857] eth0: PHY ID 00000000 at 17 IRQ POLL (stmmac-0:11) [ 1.232668] eth0: PHY ID 00000000 at 18 IRQ POLL (stmmac-0:12) [ 1.238434] eth0: PHY ID 00000000 at 19 IRQ POLL (stmmac-0:13) [ 1.244246] eth0: PHY ID 00000000 at 20 IRQ POLL (stmmac-0:14) [ 1.250011] eth0: PHY ID 00000000 at 21 IRQ POLL (stmmac-0:15) [ 1.255826] eth0: PHY ID 00000000 at 22 IRQ POLL (stmmac-0:16) [ 1.261609] eth0: PHY ID 00000000 at 23 IRQ POLL (stmmac-0:17) [ 1.267378] eth0: PHY ID 00000000 at 24 IRQ POLL (stmmac-0:18) [ 1.273192] eth0: PHY ID 00000000 at 25 IRQ POLL (stmmac-0:19) [ 1.278955] eth0: PHY ID 00000000 at 26 IRQ POLL (stmmac-0:1a) [ 1.284768] eth0: PHY ID 00000000 at 27 IRQ POLL (stmmac-0:1b) [ 1.290554] eth0: PHY ID 00000000 at 28 IRQ POLL (stmmac-0:1c) [ 1.296322] eth0: PHY ID 00000000 at 29 IRQ POLL (stmmac-0:1d) [ 1.302134] eth0: PHY ID 00000000 at 30 IRQ POLL (stmmac-0:1e) [ 1.307900] eth0: PHY ID 00000000 at 31 IRQ POLL (stmmac-0:1f) [ 1.314193] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.320640] ehci-platform: EHCI generic platform driver [ 1.325896] ehci-platform e066c000.usb: EHCI Host Controller [ 1.331498] ehci-platform e066c000.usb: new USB bus registered, assigned bus number 1 [ 1.339338] ehci-platform e066c000.usb: irq 93, io mem 0xe066c000 [ 1.360083] ehci-platform e066c000.usb: USB 2.0 started, EHCI 1.00 [ 1.366234] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.372943] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 1.380100] usb usb1: Product: EHCI Host Controller [ 1.384918] usb usb1: Manufacturer: Linux 3.10.93 ehci_hcd [ 1.390381] usb usb1: SerialNumber: e066c000.usb [ 1.395808] hub 1-0:1.0: USB hub found [ 1.399486] hub 1-0:1.0: 1 port detected [ 1.403658] ehci-platform e066d000.usb: EHCI Host Controller [ 1.409232] ehci-platform e066d000.usb: new USB bus registered, assigned bus number 2 [ 1.417146] ehci-platform e066d000.usb: irq 94, io mem 0xe066d000 [ 1.423200] ata1: SATA PHY offline [ 1.426523] ata1: SATA link down (SStatus 0 SControl 300) [ 1.440080] ehci-platform e066d000.usb: USB 2.0 started, EHCI 1.00 [ 1.446230] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.452941] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 1.460095] usb usb2: Product: EHCI Host Controller [ 1.464916] usb usb2: Manufacturer: Linux 3.10.93 ehci_hcd [ 1.470370] usb usb2: SerialNumber: e066d000.usb [ 1.475756] hub 2-0:1.0: USB hub found [ 1.479429] hub 2-0:1.0: 1 port detected [ 1.484043] usbcore: registered new interface driver usb-storage [ 1.490441] usbcore: registered new interface driver usbserial [ 1.497753] usbcore: registered new interface driver usbhid [ 1.503295] usbhid: USB HID core driver [ 1.507290] TCP: cubic registered [ 1.510528] NET: Registered protocol family 17 [ 1.515336] Key type dns_resolver registered [ 1.519614] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 3 [ 1.527148] ThumbEE CPU extension supported. [ 1.532441] ### dt-test ### No testcase data in device tree; not running test s [ 1.730082] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1.881971] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 1.888587] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.895680] usb 1-1: Product: USB2.0 Hub [ 1.900869] hub 1-1:1.0: USB hub found [ 1.904970] hub 1-1:1.0: 4 ports detected [ 2.600059] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 2.752267] usb 2-1: New USB device found, idVendor=174c, idProduct=5136 [ 2.758877] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 2.765966] usb 2-1: Product: AS2105 [ 2.769487] usb 2-1: Manufacturer: ASMedia [ 2.773556] usb 2-1: SerialNumber: 00000000000000000000 [ 2.779908] usb-storage 2-1:1.0: USB Mass Storage device detected [ 2.786188] scsi1 : usb-storage 2-1:1.0 [ 3.791011] scsi 1:0:0:0: Direct-Access ASMT 2105 0 PQ : 0 ANSI: 6 [ 3.800833] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 4.638587] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/93 1 GiB) [ 4.646925] sd 1:0:0:0: [sda] Write Protect is off [ 4.652587] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 4.687095] sda: sda1 [ 4.692953] sd 1:0:0:0: [sda] Attached SCSI disk [ 6.962741] VFS: Mounted root (jffs2 filesystem) on device 31:0. [ 6.969994] devtmpfs: mounted [ 6.973185] Freeing unused kernel memory: 184K (80659000 - 80687000) init started: BusyBox v1.30.1 (2019-06-22 15:09:50 CEST) [ 7.850015] NET: Registered protocol family 10 try to mount /dev/mtdblock1 to /var [ 8.315047] jffs2: Empty flash at 0x0120aab4 ends at 0x0120b000 starting /etc/init.d/S02loadmodules ... Sat Jan 1 00:00:00 CET 2000 Creating device node for cs_display Running insmod now ....... Driver modules loaded, please start the app now... Creating device node for KAL Creating device node for notifyq Creating device node for platform Creating device node for content Creating device node for standby Creating device node for video Creating device node for audio Creating device node for pvr Creating device node for ci Creating device node for cs_control Creating device node for cs_ir Creating device node for fb starting /etc/init.d/S04mdev ... [logoview] done with Timeout... error connect socket /tmp/neutrino.sock: No such file or directory starting /etc/init.d/S05mount ... starting /etc/init.d/S50hostname ... starting /etc/init.d/S51networking ... Configuring network interfaces... Starting wlan0 Failed to connect to wpa_supplicant - wpa_ctrl_open: Success Could not read interface wlan0 flags: No such device Failed to initialize driver interface done. starting /etc/init.d/S52syslogd ... Jan 1 00:00:14 CST-25BAB7 syslog.info syslogd started: BusyBox v1.30.1 starting /etc/init.d/S60autofs ... 1 Jan 00:00:14 ntpdate[1137]: ntpdate 4.2.8p6@1.3265-o (1) starting starting /etc/init.d/S80dvdreadfs ... starting /etc/init.d/S90inetd ... starting /etc/init.d/S96nfsd ... starting /var/etc/init.d/S9T_tuxcald ... starting /var/etc/init.d/S9T_tuxmaild ... Jan 1 00:00:15 CST-25BAB7 daemon.info : starting pid 1173, tty '': '/etc/init.d /start_neutrino' Please press Enter to activate this console. /var/plugins/operations camd_init /var/plugins/operations cardserver_start starte doscam Sat Jan 1 00:00:16 CET 2000 /var/plugins/operations camd_start /var/plugins/operations rezap 30 Dec 14:54:44 ntpdate[1137]: step time server 130.133.1.10 offset 631032867.38 1664 sec /var/plugins/operations: line 262: 6: not found [frontend.cpp:Open:284] /dev/dvb/adapter0/frontend2: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter0/frontend3: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter1/frontend0: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter1/frontend1: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter1/frontend2: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter1/frontend3: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter2/frontend0: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter2/frontend1: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter2/frontend2: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter2/frontend3: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter3/frontend0: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter3/frontend1: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter3/frontend2: No such file or directory [frontend.cpp:Open:284] /dev/dvb/adapter3/frontend3: No such file or directory MON: The POD Monitor task has started. Version = 01, Release = 00, Subrelease = 01, PID: 1213 MON: Initializing slot->inbound_queue : 7608a070 slot->outbound_queue: 76089f18 xport_command_queue: 76089d00 MON: Start resource providers... MON: Starting 9 resource(s). XPORT: POD Transport task started. PID: 1213 RM: Resource Manager thread started. PID: 1213 LINK: POD link task started with arg=0x00000000, PID: 1213 ciappReportModuleStatus: status 9, gCardStatus: 0 MON starting 9 resources finished MON after BR_POD_mon_start_rps CA resource provider started with arg=0x00000000, PID: 1213 SYSTIME resource start, PID: 1213 CP resource start, PID: 1213 APPMMI thread starts, PID: 1213 UPGRADE thread is started, PID: 1213 HOSTLANG_CNTY thread is started, PID: 1213 HOSTCTRL thread is started, PID: 1213 MMI thread is started, PID: 1213 APPINFO thread starts, PID: 1213 CP thread get delay time 0(s) XPORT: transport connection #1 set to Idle comming in add resource provider, rid=10041 POD timer thread PID: 1213 PHYS-CI+: cs_ci_init_controller called LINK: hard reset complete. CP: Start of initialization... comming in add resource provider, rid=200041 HOSTCTRL RP: resource provider is added HOSTCTRL RP: HOSTCTRL resource provider main loop processing started. comming in add resource provider, rid=30041 comming in add resource provider, rid=20043 comming in add resource provider, rid=8e1001 UPGRADE RP: resource provider is added UPGRADE RP: UPGRADE resource provider main loop processing started. LINK: slot #0 state = BR_POD_SLOT_NOT_INIT RM before wait for db ready, pid: 1213 APPINFO RP: resource provider is added, resource ID :0x20043 CA RP: Resource Provider main loop processing started. CP nvram: Root certificate file is for production comming in add resource provider, rid=410041 APPMMI RP: resource provider is added APPMMI RP: APPMMI resource provider main loop processing started. APPINFO RP: APPINFO resource provider main loop processing started. comming in add resource provider, rid=240041 SYSTIME RP: System Time main loop processing started. comming in add resource provider, rid=8d1001 HOSTLANG_CNTY RP: resource provider is added HOSTLANG_CNTY RP: HOSTLANG_CNTY resource provider main loop processing started. dump mbuf.... RM after wait for db ready, pid: 1213 MON after wait event MON: Wait for all required resource providers to sign on.... RM: Resource Manager message processing started. LINK: slot #0 state = BR_POD_SLOT_CARD_NOT_PRESENT RM: recvd LINK_STATUS tag(0x42), len=8 RM: No host-pod interface RM: close all connections on slot 0 comming in add resource provider, rid=400041 MMI RP: resource provider is added MMI RP: MMI resource provider main loop processing started. LINK: after bypass card dump mbuf.... ciappReportModuleStatus: status 0, gCardStatus: 0 dump mbuf.... no CICAM brand id extension. comming in add resource provider, rid=8c1001 RM: recvd RM_RESOURCES_CHANGED tag(0x43), len=8 CP RP: resource provider is added CP: Resource Provider main loop processing started. 2019-12-30 14:54:54.218 [sectionsd] start 2019-12-30 14:54:54.282 [sectionsd] starting 2019-12-30 14:54:54.385 [sectionsd] timeThread::run:: starting, pid 1213 (167210 3088) 2019-12-30 14:54:54.391 [sectionsd] eitThread::run:: starting, pid 1213 (1670005 936) 2019-12-30 14:54:54.398 2019-12-30 14:54:54.407 [sectionsd] cnThread::run:: star ting, pid 1213 (1667908784) [sectionsd] freeSatThread::run:: starting, pid 1213 (1665811632) 2019-12-30 14:54:54.517 [sectionsd] timeThread: get DVB time ch 0x000000000000 ( isOpen 1) [ConfigFile] Unable to open file /var/tuxbox/config/bookmarks for reading. 2019-12-30 14:54:55.895 [sectionsd] commandserviceStopped 2019-12-30 14:54:55.902 [sectionsd] cnThread: stop eit update filter (not active ) 2019-12-30 14:54:55.911 [sectionsd] commandserviceStopped done 2019-12-30 14:54:55.942 [sectionsd] commandserviceChanged: Service change to 221 42710f001c764 demux #0 2019-12-30 14:54:55.947 [sectionsd] timeThread: get DVB time ch 0x2710f001c764 r c: -1 neutrino_sets_time 0 2019-12-30 14:54:56.160 [sectionsd] timeThread: Time set FAILED (enabled: ntp 0 dvb 1) sh: you need to specify whom to kill 2019-12-30 14:54:56.862 [sectionsd] commandserviceChanged: Service change to 221 42710f001c764 demux #0 2019-12-30 14:54:57.186 [sectionsd] timeThread: get DVB time ch 0x2710f001c764 ( isOpen 1) 2019-12-30 14:54:57.485 [sectionsd] timeThread: get DVB time ch 0x2710f001c764 r c: 8 neutrino_sets_time 0 2019-12-30 14:54:57.495 [sectionsd] SIsectionTIME::parse: TDT time: Mon Dec 30 1 4:54:28 2019 2019-12-30 14:54:57.498 [sectionsd] timeThread: timediff -29498799, current: 30. 12.2019 14:54:57, dvb: Mon Dec 30 14:54:28 2019 2019-12-30 14:54:28.000 [sectionsd] eitThread::run:: time set: Mon Dec 30 14:54: 28 2019 2019-12-30 14:54:28.009 2019-12-30 14:54:28.009 [sectionsd] cnThread::run:: time set: Mon Dec 30 14:54:28 2019 [sectionsd] freeSatThread::run:: time set: Mon Dec 30 14:54:28 2019 2019-12-30 14:54:28.019 [sectionsd] timeThread: Time set via DVB (TDT), going to sleep for 5 seconds. 2019-12-30 14:54:28.109 [sectionsd] addEvent: ch 2710f001c764 running 4 (curr) g ot_CN 0 2019-12-30 14:54:28.608 [sectionsd] addEvent: ch 2710f001c764 running 1 (next) g ot_CN 1 2019-12-30 14:54:30.058 [sectionsd] cnThread: eit update filter, ch 0x2710f001c7 64, current ver 0x08 got events 3 (not active) --- > rezapping 2019-12-30 14:54:32.539 [sectionsd] commandserviceChanged: Service change to 221 42710f001c764 demux #0 2019-12-30 14:54:33.074 [sectionsd] timeThread: get DVB time ch 0x2710f001c764 ( isOpen 1) 2019-12-30 14:54:35.477 [sectionsd] timeThread: get DVB time ch 0x2710f001c764 r c: 29 neutrino_sets_time 0 2019-12-30 14:54:35.485 [sectionsd] SIsectionTIME::parse: TOT time: Mon Dec 30 1 4:54:35 2019 2019-12-30 14:54:35.494 [sectionsd] timeThread: timediff -494060, current: 30.12 .2019 14:54:35, dvb: Mon Dec 30 14:54:35 2019 2019-12-30 14:54:35.505 [sectionsd] difference is < 120s, using adjtime(0, -4940 60). oldd(0, 0) 2019-12-30 14:54:35.511 [sectionsd] timeThread: Time set via DVB (TOT), going to sleep for 1800 seconds. bearbeitet 30. Dezember 2019 von Gandal OK, den nächsten Betrag lösche ich einfach wenn keine Spoiler-Tags verwendet werden. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Don de Deckelwech Geschrieben 30. Dezember 2019 Melden Share Geschrieben 30. Dezember 2019 Hi, da fehlt aber noch einiges, aber das Wichtigste: gehts denn überhaupt??? Ciao, DdD. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
skyline666 Geschrieben 30. Dezember 2019 Autor Melden Share Geschrieben 30. Dezember 2019 Ja die Box läuft hoch. Aber nur über Scart kann ich den Stratbildschirm und später auch das Fernsehbild sehen. Beim Booten wird erst das Coolstream Logo aus dem Boot (meine Vermutung) angezeigt! Selbst dann das Startbild des Image wird nicht gezeigt und auf dem Bildschirm tanzen grüne Streifen senkrecht und wagerecht auf schwarzen Grund. Sobald dann auch das normale Fernsehbild erscheint kommt dieses auch auf den Fernseher! Wie geschrieben ist bei der Nutzung nur HDMI alles schwarz bis zum Fernseh(TON). Da ja kein Bild erscheint. Damit bin ich bei Euch, dass dies den Chip zerstört hat, der das HDMI Signal rausgibt. Du hast jetzt das PDF zum Chip gesandt. Auf der Platine glaube ich diesen neben dem Kühler gefunden zu haben. Die Hoffnung! Ist gesockelt war natürlich die Ente in 2019! Kann man so eine Mittenplatine nachkaufen und oder Reparieren? Oder wird die Coolie jetzt zum Elektroschrott? Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Don de Deckelwech Geschrieben 30. Dezember 2019 Melden Share Geschrieben 30. Dezember 2019 Hi, also das Bootlog hört zu früh auf, da müsste noch ne Menge mehr kommen. Und hast du eigentlich schon den Standardtrick bei HDMI-Problemen versucht: Beide Geräte auschalten, beide Stecker ziehen und mind 2 Minuten warten. Dann zuerst den TV anmachen und komplett starten lassen, danach erst die Box einschalten und dabei die Daumen drücken. Ciao, DdD. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
skyline666 Geschrieben 30. Dezember 2019 Autor Melden Share Geschrieben 30. Dezember 2019 Das müsst Ihr mir jetzt mal erklären! Im Vorfeld hätte ich mindestens 50€ gewettet, dass der "Standardtrick" soviel hilft wie streicheln und oder beten! Erst einmal vielen Dank! JA ES LÄUFT WIEDER AUF HDMI OHNE PROBLEME! Aber bitte mal erklären was passiert ist und wie es behoben wurde, dass glaubt mir sonst niemand. Vielen Dank Euch für die Hilfe! Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Admin Gandalf Geschrieben 30. Dezember 2019 Admin Melden Share Geschrieben 30. Dezember 2019 vor 20 Minuten schrieb skyline666: Du hast jetzt das PDF zum Chip gesandt. Auf der Platine glaube ich diesen neben dem Kühler gefunden zu haben. Die Hoffnung! Ist gesockelt war natürlich die Ente in 2019! Kann man so eine Mittenplatine nachkaufen und oder Reparieren? Reparieren ist möglich, entweder selbder machen oder jemanden suchen der das erledigt. Zu kaufen wird es die Platine kaum mehr geben, vielleicht aus einer defekten Box falls so was irgendwo angeboten wird. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Admin Gandalf Geschrieben 30. Dezember 2019 Admin Melden Share Geschrieben 30. Dezember 2019 vor 3 Minuten schrieb skyline666: Aber bitte mal erklären was passiert ist und wie es behoben wurde, dass glaubt mir sonst niemand. Das Zauberwort heisst HDMI-CEC Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Don de Deckelwech Geschrieben 30. Dezember 2019 Melden Share Geschrieben 30. Dezember 2019 Hi, ohne es genau zu wissen, erkläre ich es mir so, dass der TV sich da iwas merkt, bzw durch das Anstöpseln des anderen Gerätes was verstellt wurde. Durch Stromlos machen vergisst er das alles wieder und durch das erst spätere Einschalten der Box werden die Sachen wieder neu zw den beiden Geräten ausgehandelt... Ciao, DdD. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
skyline666 Geschrieben 30. Dezember 2019 Autor Melden Share Geschrieben 30. Dezember 2019 Das verstehe auch ich. Vielen Dank noch mal! Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge