ocze Geschrieben 3. Januar 2012 Melden Share Geschrieben 3. Januar 2012 HILFE.HABE EINE NOKIA DBOX KABEL 2xINTEL ,LAUT DISPLAY IN DEBUG MODE UND SPORTSER IMAGE. DIE BOX BOOTET STÄNDIG NEU : BETASEARCH DANN DEBUG ANZEIGE ,MAL AUCH NICHT DANN SPORTSER ANZEIGE ,MAL AUCH NICHT UND DANN WIEDER ALLES VON VORNE. KANN MIR JEMAND HELFEN?. HIER DAS BOOT LOG: debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID 01-75.c6.19.07.00.00-21 debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 File /root/platform/nokia-dbox2/kernel/os not found: No such file or directory boot flash /root/platform/nokia-dbox2/kernel/os failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/mpc8xx-dbox2/kernel/os in Flash-FS debug: Got Block #0036 will verify ELF image, start= 0x800000, size= 162700 verify sig: 262 Branching to 0x40000 U-Boot 1.2.0 Overclocking mod (Tuxbox) (Dec 15 2007 - 15:56:05) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ... done. FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 769899 bytes loaded to 0x100000 .................................................. ............. done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 769835 Bytes = 751.8 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... Error: inflate() returned -3 GUNZIP ERROR - must RESET board to recover debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID 01-75.c6.19.07.00.00-21 debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0036 will verify ELF image, start= 0x800000, size= 162700 verify sig: 262 Branching to 0x40000 U-Boot 1.2.0 Overclocking mod (Tuxbox) (Dec 15 2007 - 15:56:05) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ... done. FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 769899 bytes loaded to 0x100000 .................................................. ............. done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 769835 Bytes = 751.8 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... Error: inflate() returned -3 GUNZIP ERROR - must RESET board to recover debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID 01-75.c6.19.07.00.00-21 debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0036 will verify ELF image, start= 0x800000, size= 162700 verify sig: 262 Branching to 0x40000 U-Boot 1.2.0 Overclocking mod (Tuxbox) (Dec 15 2007 - 15:56:05) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ... done. FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 769899 bytes loaded to 0x100000 .................................................. ............. done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 769835 Bytes = 751.8 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... Error: inflate() returned -4 GUNZIP ERROR - must RESET board to recover debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID 01-75.c6.19.07.00.00-21 debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0036 will verify ELF image, start= 0x800000, size= 162700 verify sig: 262 Branching to 0x40000 U-Boot 1.2.0 Overclocking mod (Tuxbox) (Dec 15 2007 - 15:56:05) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ... done. FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID 01-75.c6.19.07.00.00-21 debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0036 will verify ELF image, start= 0x800000, size= 162700 verify sig: 262 Branching to 0x40000 Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
merkwuerden Geschrieben 3. Januar 2012 Melden Share Geschrieben 3. Januar 2012 Die Box ist defekt, wahrscheinlich CPU im Eimer: Uncompressing Kernel Image ... Error: inflate() returned -4 GUNZIP ERROR - must RESET board to recover Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
cooliman Geschrieben 3. Januar 2012 Melden Share Geschrieben 3. Januar 2012 Flash die Box mal neu denn ein CPU-Fehler ist das mit Sicherheit nicht. Gibt in diversen Boards genügend Threads mit dem selben Fehler der behoben werden konnte nachdem das Image neu geflasht wurde. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge
Archiviert
Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.