Jump to content

dbox findet keine Kanäle


bubi

Empfohlene Beiträge

ich habe das keyweltimage 1.20 drauf, habe aber auch schon andere Images probiert. Wenn ich eine Kanalsuche mache, wird kein einziger kanal gefunden. Weiss jemand, woran das liegt? Ist die Box kaputt oder muss ich irgendetwas einstellen? Bin bei Unitymedia. Danke.

Link zu diesem Kommentar
Auf anderen Seiten teilen

  • 3 weeks later...

Wenn du den Antennenanschluss an deine BOX machst, deine BOX mit Strom versorgst

und von dort aus via Antennenkabel auf den Fernseher gehst,

sind dann Analoge Sender zu finden am Fernseher ????

 

Wenn nicht , würde ich sagen , das dein TUNER hinüber ist.

Wenn dieses der Fall ist , sollte der Baustein BFG 94 ersetzt werden

und deinen Tuner wieder zum Leben erwecken.

 

Das das ganze eine Fummelarbeit ist sollte dir aber schon vorab

klar sein.

Zudem solltest du keinen BILLIG Lötkolben verwenden.

 

Ich selbst Reparierte schon einige Tuner und hatte immer Erfolg

dabei .

 

Den Tuner braucht man nicht unbedingt auslöten , das geht auch

im eingebauten Zustand , wenn man mit Fingerspitzengefühl

an die Sache herangeht.

 

Das folgende VIDEO zeigt wie es geht.

http://www.youtube.com/watch?v=h3zwx_Tb9tI

 

LG

 

Ps.: Ich biete zu dem meine Hilfe an bei der Reparatur....Material und Versandkosten müsst ihr allerdings selber Zahlen , das Versteht sich

oder ihr kommt persönlich vorbei und schaut mir über die Schulter

bearbeitet von Der0815Typ
  • Like 1
Link zu diesem Kommentar
Auf anderen Seiten teilen

  • 4 weeks later...

Bootlog erstellen ganz einfach (klick)

 

Du brauchst dazu ein serielles Nullmodemkabel und eine COM-Schnittstelle am PC. Sollte Dein PC keine COM-Schnittstelle mehr haben (heutzutage wird so was von den Herstellern ja gern einfach wegrationalisiert), gibt es dafür Adapter COM (seriell) zu USB zu kaufen.

Link zu diesem Kommentar
Auf anderen Seiten teilen

Ok habe noch einen alten PC gefunden mit einer COM Schnittstelle, anbei mein Bootlog

 

 

 

startet at 01.01.2004 00:06:10

------------------------------

------------------------------

stopped at 01.01.2004 00:06:23

startet at 01.01.2004 00:07:05

------------------------------

˝debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.0 mID 01

debug: feID 7a gtxID 0b

debug: fpID 5a dsID 01-f5.88.43.07.00.00-43

debug: HWrev X5 SWrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0032debug: Got Block #0004debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 174720

verify sig: 262

Branching to 0x40100

U-Boot 2011.06 (Tuxbox) (Jul 15 2011 - 08:36:14)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***

Board: DBOX2, Nokia, BMon V1.0

Watchdog enabled

I2C: ready

DRAM: 32 MiB

Flash: 8 MiB

Scanning JFFS2 FS: . . | . / - \ | / - \ . done.

env: found console with value ttyS0

env: found lcd_inverse with value 0

env: found lcd_contrast with value 15

FB: ready

In: serial

Out: serial

Err: serial

Net: SCC

LCD: ready

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 1 0

............................................................... done

Un-Protected 63 sectors

### FS (squashfs) loading 'vmlinuz' to 0x200000

### FS load complete: 666609 bytes loaded to 0x200000

## Booting kernel from Legacy Image at 00200000 ...

Image Name: Linux-2.4.37.11-dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 666545 Bytes = 650.9 KiB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.37.11-dbox2 (image@server) (gcc version 3.4.6) #5 Fr 15. Jul 08:37:12 CEST 2011

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600 dbox_duplex=

Decrementer Frequency = 252000000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)

Console: colour dummy device 80x25

Calibrating delay loop... 66.96 BogoMIPS

Memory: 30832k available (1132k kernel code, 344k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.

squashfs: version 3.0 (2006/03/15) Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

half-duplex mode enabled

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:40:14:df

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "FLFS (U-Boot)"

0x00040000-0x005e0000 : "root (squashfs+lzma)"

0x005e0000-0x00800000 : "var (jffs2)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started: BusyBox v1.18.5 (2011-08-01 18:48:25 CEST)

starting pid 8, tty '': '/etc/init.d/rcS'

mount: using /etc/fstab

##### Image-Version: Keywelt_Jul2011_V1.00 #####

Mon Aug 1 18:57:00 UTC 2011

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

tuxbox: no IDE-Interface detected

Detected STB:

Vendor: Nokia

Model: D-BOX2

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

$Id: cam.c,v 1.33 2011/06/19 11:49:27 rhabarber1848 Exp $

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

avia_av: $Id: avia_av_core.c,v 1.106 2011/06/19 11:49:27 rhabarber1848 Exp $

avia_av_core: Starting avia_av_wdt thread.

avia_av: AVIA 500 LB4 found, sptsfix is off

avia_av: microcode verify: 4 errors.

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... GTX

avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.215 2011/06/19 11:51:17 rhabarber1848 Exp $

avia_gt_core: masking unhandled irq reg 1 bit 11

avia_gt_core: masking unhandled irq reg 1 bit 13

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters disabled.

avia_gt_core: masking unhandled irq reg 0 bit 6

avia_gt_core: masking unhandled irq reg 0 bit 7

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.14 2011/06/19 11:49:27 rhabarber1848 Exp $

udhcpc (v1.18.5) started

Setting IP address 0.0.0.0 on eth0

Sending discover...

Sending discover...

Sending discover...

No lease, forking to background

wget: can't connect to remote host (127.0.0.1): Connection refused

insmod: warning: kernel-module version mismatch

ves1820 was compiled for kernel version 2.4.37-dbox2

while this kernel is version 2.4.37.11-dbox2

DVB: VES1820(0): pwm=0x48

DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

avia_gt_napi: $Id: avia_gt_napi.c,v 1.208 2011/06/19 11:51:17 rhabarber1848 Exp $

insmod: warning: kernel-module version mismatch

multicam was compiled for kernel version 2.4.37-dbox2

while this kernel is version 2.4.37.11-dbox2

DBox2 Multicam Driver v1.01 skars & doz21 :D

Loading /share/keymaps/i386/qwertz/de-latin1-nodeadkeys.kmap.gz

starting pid 195, tty '': '/etc/init.d/start'

Please press Enter to activate this console. kb2rcD 0.17 started [01.08.2011 - 20:57:26]

kb2rcD <use 15 conversions>

$Id: sectionsd.cpp,v 1.335 2011/06/19 12:31:44 rhabarber1848 Exp $

[sectionsd] FreeSat enabled

[sectionsd] Caching max 3000 events

[sectionsd] Caching 4 days

[sectionsd] Caching 12 hours Extended Text

[sectionsd] Events are old 120min after their end time

/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory

/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory

/var/tuxbox/config/mybouquets.xml: No such file or directory

[timerd] woke up from timer? false!

/var/plugins/operations camd_init

/var/plugins/operations cardserver_start

$Id: zapit.cpp,v 1.440k 2009/09/18 20:30:00 rhabarber1848 & Worschter & SnowHead Exp $

[zapit] PMT update enabled

[frontend] uncommitted_switch_mode 0 auto_fec 0

/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory

/tmp/currentservices.xml: No such file or directory

[controld] Boxtype detected: (1, Nokia D-BOX2)

/var/plugins/operations sect_renice

[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1

[CVideo::setVideoFormat] output format: 4:3(LB)

/var/plugins/operations camd_start

neutrino: /lib/libpng12.so.0: no version information available (required by neutrino)

neutrino: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0)

starting /bin/neutrino

[neutrino] frameBuffer Instance created

812k video mem

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

[neutrino] enable flash

[neutrino] Software update enabled

starte capmtserver

capmtserver provides pmt info, for non-enigma platforms

starte CCcam

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)

[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)

[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)

[LCDFONT] Intializing font cache...

[LCDFONT] FTC_Face_Requester (Fix14/Bold)

[neutrino] SetupFonts filename: /share/fonts/micron.ttf fontname: Micron

[rcinput] no file /var/tuxbox/config/rc.conf was found

/dev/input/event1: No such file or directory

[neutrino] menue setup

[neutrino] init menus...

[neutrino] GUI-Personalize instance created...

[neutrino] found esound, adding personalized esound entry to mainmenue

[network config] Instance created

[neutrino] setRepeat: delay=150 period=125 use kernel-repeat: no

[neutrino] registering as event client

[scan-setup] received 43 providers

[sectionsd] getUTC: read: Connection timed out

/bin/nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0)

[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)

[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)

[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)

[LCDFONT] Intializing font cache...

[yhttpd] Webserver starting...

[sectionsd] getUTC: read: Connection timed out

------------------------------

stopped at 01.01.2004 00:09:17

 

 

bearbeitet von merkwuerden
Bitte Logfiles künftig in Spoiler-Tags setzen, damit der Thread lesbar bleibt
Link zu diesem Kommentar
Auf anderen Seiten teilen

Melden tut sich der Tuner zumindest korrekt, die Box wird auch als Kabelbox erkannt. Was bei defektem/nicht erkannten Tuner nicht der Fall wäre, dann meldet sich das Teil als SAT-Box. Kann im Endeffekt nur die Eingangsstufe des Tuners defekt sein, dann ist die Box taub wie eine Nuss.

Hast Du Deinen Kabelanschluss mit einem anderen Digitalreceiver mal getestet? Nicht dass da was im Eimer ist und kein Digitalsignal anliegt, dann kann die dBox2 nämlich nichts finden.

 

Deine Box hat aber ein trotzdem ein Problem, wenn auch ein anderes:

avia_av: AVIA 500 LB4 found, sptsfix is off

avia_av: microcode verify: 4 errors.

Der Avia-Chip ist hin.

Link zu diesem Kommentar
Auf anderen Seiten teilen

Den Chip könnte man wechseln lassen. Nur lohnt sich das nicht wirklich, weil man für die rund 40 Euro, die das kommt, eine komplette funktionstüchtige Box bekommt. Mehr als 30 bis 40 Euro ist eine dBox2-Kabel nämlich nicht mehr wert, die Teile sind vom technischen Stand immerhin ca. 12 Jahre alt. ;)

Link zu diesem Kommentar
Auf anderen Seiten teilen

  • 3 years later...

Hallo! Hab das gleiche Problem mit ner Sagem Sat 1x...

 

 

 

Ïdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2  mID 03
debug: feID 00    enxID 03
debug: fpID 52     dsID 01-3d.ca.06.08.00.00-29
debug: HWrev 21  FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036debug: Got Block #0040debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 166864
verify sig: 262
Branching to 0x40100


U-Boot 2012.04 (Tuxbox) (Jun 18 2015 - 18:09:38)

CPU:   PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
       Watchdog enabled
I2C:   ready
DRAM:  32 MiB
Flash: 8 MiB
Scanning JFFS2 FS:   .  .  | .  .  / - \ | / - \ done.
env: found console with value ttyS0
env: found lcd_inverse with value 0
env: found lcd_contrast with value 15
FB:    ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC
LCD:   ready

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  1 0
............................................................... done
Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x200000
### FS load complete: 661855 bytes loaded to 0x200000
## Booting kernel from Legacy Image at 00200000 ...
   Image Name:   Linux-2.4.37.11-dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    661791 Bytes = 646.3 KiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.37.11-dbox2 (image@server) (gcc version 4.1.2) #7 Do 18. Jun 18:10:27 CEST 2015
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600 dbox_duplex=
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30848k available (1124k kernel code, 336k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:33:36:93
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank
 Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x005c0000 : "root (squashfs+lzma)"
0x005c0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.22.1 (2015-06-18 18:13:56 CEST)
starting pid 8, tty '': '/etc/init.d/sysinit'
[bOOT] running /etc/init.d/sysinit
starting pid 30, tty '': '/etc/init.d/rcS'

Please press Enter to activate this console.

##### Image-Version: Keywelt_Jun2015_V3.00 #####

Sat Jan  1 00:00:00 UTC 2000
tuxbox: IDE-Interface detected, Vendor: Gurgel
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.17 2012/08/29 17:58:04 rhabarber1848 Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of IDE-Interface is at: 0xc3895000
dboxide: IDE-Interface detected, Vendor: Gurgel
dboxide: sreset succeeded
warte auf 'init_ide'
Probing IDE interface ide0...
hda: SAMSUNG HD161HJ, ATA DISK drive
hdb: no response (status = 0xa1), resetting drive
hdb: no response (status = 0xa1)
ide0 at 0x010-0x017,0x04e on irq 47
warte auf 'init_ide'
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2
warte auf 'init_ide'
EXT2-fs warning (device ide0(3,2)): ext2_read_super: mounting ext3 filesystem as ext2

EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended

/dev/ide/host0/bus0/target0/lun0/disc:
 setting AAM level to 0x80 (128)
 setting drive write-caching to 0 (off)
 setting standby to 72
 (6 minutes 0 seconds)
'init_ide' fertig
Detected STB:
    Vendor: Sagem
    Model: D-BOX2  (1 flash chips)
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
$Id: cam.c,v 1.33 2011/06/19 11:49:27 rhabarber1848 Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.106(a) 2011/06/19 11:49:27 Markham Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: AVIA 600L found.
avia_av: audio_sync is on (default: on)
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.216 2012/03/07 18:31:52 rhabarber1848 Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_av_core: Starting avia_gt_wdt thread.
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.14 2011/06/19 11:49:27 rhabarber1848 Exp $
ifconfig: SIOCSIFNETMASK: Invalid argument
ves1x93: Detected ves1993
DVB: registering frontend 0:0 (VES1993)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.208 2011/06/19 11:51:17 rhabarber1848 Exp $
insmod: warning: kernel-module version mismatch
    multicam was compiled for kernel version 2.4.37-dbox2
    while this kernel is version 2.4.37.11-dbox2
DBox2 Multicam Driver v1.01 skars & doz21 :D
 * starting /var/etc/init.d/S10rtc ...
 * starting /var/etc/init.d/S12squashedit ...
 * starting /var/etc/init.d/S15syslogd ...
 * starting /var/etc/init.d/S16kb2rcd ...
 * starting /var/etc/init.d/S16lircd ...
 * starting /var/etc/init.d/S18openntpd ...
 * starting /var/etc/init.d/S30autofs ...
 * starting /var/etc/init.d/S30cron ...
 * starting /var/etc/init.d/S30dropbear ...
 * starting /var/etc/init.d/S30inadyn ...
 * starting /var/etc/init.d/S31nfsserver ...
 * starting /var/etc/init.d/S31sambaserver ...
 * starting /var/etc/init.d/S39lanswap ...
 * starting /var/etc/init.d/S40tuxcald ...
 * starting /var/etc/init.d/S40tuxmaild ...
 * starting /var/etc/init.d/S99gui ...
$Id: sectionsd.cpp, v1.350
[sectionsd] FreeSat enabled
[sectionsd] Caching max 3000 events
[sectionsd] Caching 4 days
[sectionsd] Caching 12 hours Extended Text
[sectionsd] Events are old 120min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[1;31;40m01:00:49.517 [timeThread] getting DVB time ...[0m
$Id: timerd.cpp, v1.68
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.
[timerd] woke up from timer? false!
/var/plugins/operations camd_init
/var/plugins/operations cardserver_start
$Id: zapit.cpp, v1.464 ;)
[zapit] PMT update enabled
[zapit] Load ScanSetup Setting: 0 0.000000 0.000000 1 1 8
[frontend] uncommitted_switch_mode 0 auto_fec 0
[getservices] /var/tuxbox/config/zapit/myservices.xml  found.
/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory
/var/plugins/operations camd_start
starte camd2
[camd2] EMM : active
[camd2] Socket=/tmp/camd.sock02
[camd] ca system id: 1702
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (3, Sagem D-BOX2)
/var/plugins/operations sect_renice
[controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1
[CVideo::setVideoFormat] output format: 4:3(LB)
neutrino: /lib/libpng12.so.0: no version information available (required by neutrino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/SemiCondensed)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[neutrino] settings font file /var/tuxbox/fonts/LiberationSans-Regular.ttf
[neutrino] font family Liberation Sans
[rcinput] no file /var/tuxbox/config/rc.conf was found
/dev/input/event1: No such file or directory
[network config] Instance created
[neutrino] menue setup
[neutrino] init menus...
[neutrino] GUI-Personalize instance created...
[neutrino] found esound, adding personalized esound entry to mainmenue
[neutrino] setRepeat: delay=150 period=125 use kernel-repeat: no
[neutrino] registering as event client
[scan-setup] received 19 sats
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[sectionsd] getUTC: read: Connection timed out
[1;31;40m01:01:21.620 [timeThread] getting DVB time ...[0m
[zapit] LOCK LOST! trying rezap... channel: 'Sky Sport 4'
/bin/nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0)
[basicsocket] recv timed out.
[neutrino.cpp] executing /var/tuxbox/config/init.end.
busy /tmp/zapit.sock
/var/plugins/operations check_bitstream
[check_bitstream] waiting for stream (0x0000)... 6 sec.
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.3.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...[basicsocket] send_data: Broken pipe
OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...[zapit] LOCK LOST! trying rezap... channel: 'Sky Sport 4'
OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[check_bitstream] waiting for stream (0x0000)... 5 sec.
[check_bitstream] waiting for stream (0x0000)... 4 sec.
[check_bitstream] waiting for stream (0x0000)... 3 sec.
[check_bitstream] waiting for stream (0x0000)... 2 sec.
[zapit] LOCK LOST! trying rezap... channel: 'Sky Sport 4'
[check_bitstream] waiting for stream (0x0000)... 1 sec.
[check_bitstream] waiting for stream (0x0000)... 0 sec.
[check_bitstream] rezapping...
[zapit] LOCK LOST! trying rezap... channel: 'Sky Sport 4'
[neutrino] initialized everything
zap failed!
zap failed!
[basicsocket] recv timed out.
busy /tmp/zapit.sock
[basicsocket] send_data: Broken pipe
[zapit.cpp:send_data_count:2695] could not send any return: Illegal seek
[zapit] LOCK LOST! trying rezap... channel: 'Sky Sport 4'
[yhttpd] Webserver starting...
[zapit] LOCK LOST! trying rezap... channel: 'Sky Sport 4'
[sectionsd] getUTC: read: Connection timed out
[1;31;40m01:01:53.720 [timeThread] getting DVB time ...[0m
[zapit] LOCK LOST! trying rezap... channel: 'Sky Sport 4'
[zapit] LOCK LOST! trying rezap... channel: 'Sky Sport 4'

 

 

Der Avia scheint ok.... Jemand einen Vorschlag?

 

Danke im Voraus

Link zu diesem Kommentar
Auf anderen Seiten teilen

Hi,

da ich sonst keine Fehler im Log entdeckt habe, würde ich sagen, dass der Tuner hin ist:

 

[zapit] LOCK LOST! trying rezap... channel: 'Sky Sport 4'

Jedenfalls solange die Satanlage ansich in Ordnung ist, und du definitiv funktionierende Senderlisten eingespielt hast, scheint es so zu sein...

 

Ciao,

DdD.

Link zu diesem Kommentar
Auf anderen Seiten teilen

@McBa

 

Erstmal V3.10 drüberbügeln.

Thankx @ all !!!

 

War so, Tuner hat sich verabschiedet... Andere Box, braunes Board (AC/DC Kontakte vs. kein Lötkolben) und HDD umgebastelt, läuft....

 

Hab jetzt V3.10 - 15 auf der Sat drauf, leider kein online Update bzw. PlugIn`s machbar... "Schau her, sollte das ein Hackversuch werden....". Ich hatte das schon einmal thematisiert, habe es aber um`s verr..... nicht über die Suche gefunden, was hier das Problem war....?!

 

Ahhhh... Denke Servertime vs. Sattime... häng die später mal an den Sat und checke das nochmal....

 

Sowohl o. g.  bearbeitetete Sat- Box, wie auch eine weitere Kabel- Box laufen schön durch`s Ifa (64bit Win7, serial+Xover, onboard Atheros AR8151 PCI-E Gigabit/half duplex), booten, Sendersuche bei der Kabel o.k., bei der Sat auch....

 

@Admins: Ggf. Thema splitten wenn nötig - Danke im Voraus...

 

Zudem ist mir gestern Abend noch ne Kabel- Box abgeraucht. Ifa läuft schleppend durch (25-30 Min)... Lt. Box- Display "fertig", Am Ifa-Log tut sich nix (bis Software upload o.k.), Box bleibt weiterhin im "your Box is booting" hängen...  Putty- serial zeigt gar nix.... Bekomm einfach kein neues System drauf....Müll?

 

Mc

bearbeitet von McBa
Link zu diesem Kommentar
Auf anderen Seiten teilen

D-Box Kabel: Serial - COM1 - 9600 - Keine Reaktion.... Box startet munter durch bis "your Box is booting"... Kein Log...

 

Bei der angesprochenen Sat- Box bekomm ich beim online- Update am Sat und der Fritz auch keine Verbindung...

Gepingt (PC) hab ich sie jetzt am Sat noch nicht, da es mir erstmal recht war, dass die Grundfunktionen (Bild, Ton, Aufnahme, Wiedergabe) laufen...

Image update...

"aktuelle Version.........."

"update Version..........."

 

Image aktualisieren..."nicht möglich"...

 

Netzwerk passt alles.... D-Box Netzwerktest Ping - Nicht erreichbar

 

Damed....

 

 

Mc

Link zu diesem Kommentar
Auf anderen Seiten teilen

Log von der Sat tu ich mir morgen bei demjenigen evtl. mal an.... (Test - Standard Netzwerk Setting)

 

Du meinst wohl "... deiner Einstellung..." :cool:

 

Von der Kabel kommt kein Log...

 

Meld mich dann....

 

Merci.. Hübsches WE..

 

Mc

bearbeitet von McBa
Link zu diesem Kommentar
Auf anderen Seiten teilen

  • Wer ist Online   0 Benutzer

    • Keine registrierten Benutzer online.
×
×
  • Neu erstellen...