Boot Probleme Dbox

[zebralao]

Hallo,

 

hab ne Nokia DBox neu geflasht. Allerding wiederholt sich der Bootvorgang in regelmäßigen Abständen.

Das Problem bestand allerdings auch schon vorm flashen auf das Sept. Image.

 

Hat jemand eine Idee?

 

Gruß

Zebralao

 

 

�debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: LCD init error -1

debug: BMon V1.2 mID 01

debug: feID dd gtxID 0b

debug: fpID 5a dsID 01-e2.70.cb.05.00.00-8f

debug: HWrev 09 FPrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036debug: Got Block #0040debug: Got Block #0044

 

will verify ELF image, start= 0x800000, size= 171660

verify sig: 262

Branching to 0x40000

 

 

U-Boot 2009.08 (Tuxbox) (Sep 26 2009 - 14:36:43)

 

CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

Board: DBOX2, Nokia, BMon V1.2

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: . . | . / - \ | / - \ done.

env: found console with value ttyS0

env: found lcd_inverse with value 0

env: found lcd_contrast with value 15

FB: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

LCD: ready

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 1 0

............................................................... done

Un-Protected 63 sectors

### FS (squashfs) loading 'vmlinuz' to 0x200000

### FS load complete: 671052 bytes loaded to 0x200000

## Booting kernel from Legacy Image at 00200000 ...

Image Name: Linux-2.4.37.6-dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 670988 Bytes = 655.3 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.37.6-dbox2 (image@Server) (gcc version 3.4.6) #26 Sa Sep 26 14:37:12 CEST 2009

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600 dbox_duplex=

Decrementer Frequency = 252000000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)

Console: colour dummy device 80x25

Calibrating delay loop... 66.96 BogoMIPS

Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.

squashfs: version 3.0 (2006/03/15) Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

half-duplex mode enabled

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:44:c1:68

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "FLFS (U-Boot)"

0x00040000-0x005e0000 : "root (squashfs+lzma)"

0x005e0000-0x00800000 : "var (jffs2)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started: BusyBox v1.14.4 (2009-09-26 14:42:24 CEST)

starting pid 8, tty '': '/etc/init.d/rcS'

mount: using /etc/fstab

 

 

##### Image-Version: Keywelt_Sep2009_V1 #####

 

Sat Sep 26 14:57:00 UTC 2009

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

tuxbox: no IDE-Interface detected

Detected STB:

Vendor: Nokia

Model: D-BOX2

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

insmod: warning: kernel-module version mismatch

dbox2_fp_input was compiled for kernel version 2.4.37-dbox2

while this kernel is version 2.4.37.6-dbox2

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

 

KEYWELT Pre-Configuration Part 1

 

av�debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: LCD init error -1

debug: WATCHDOG RESET

debug: BMon V1.2 mID 01

debug: feID dd gtxID 0b

debug: fpID 5a dsID 01-e2.70.cb.05.00.00-8f

debug: HWrev 09 FPrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036debug: Got Block #0040debug: Got Block #0044

 

will verify ELF image, start= 0x800000, size= 171660

verify sig: 262

Branching to 0x40000

 

********************************************************************************

 

U-Boot 2009.08 (Tuxbox) (Sep 26 2009 - 14:36:43)

 

CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

Board: DBOX2, Nokia, BMon V1.2

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: . . | . / - \ | / - \ done.

env: found console with value ttyS0

env: found lcd_inverse with value 0

env: found lcd_contrast with value 15

FB: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

LCD: ready

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 1 0

............................................................... done

Un-Protected 63 sectors

### FS (squashfs) loading 'vmlinuz' to 0x200000

### FS load complete: 671052 bytes loaded to 0x200000

## Booting kernel from Legacy Image at 00200000 ...

Image Name: Linux-2.4.37.6-dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 670988 Bytes = 655.3 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.37.6-dbox2 (image@Server) (gcc version 3.4.6) #26 Sa Sep 26 14:37:12 CEST 2009

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600 dbox_duplex=

Decrementer Frequency = 252000000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)

Console: colour dummy device 80x25

Calibrating delay loop... 66.96 BogoMIPS

Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.

squashfs: version 3.0 (2006/03/15) Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

half-duplex mode enabled

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:44:c1:68

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "FLFS (U-Boot)"

0x00040000-0x005e0000 : "root (squashfs+lzma)"

0x005e0000-0x00800000 : "var (jffs2)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started: BusyBox v1.14.4 (2009-09-26 14:42:24 CEST)

starting pid 8, tty '': '/etc/init.d/rcS'

mount: using /etc/fstab

 

 

##### Image-Version: Keywelt_Sep2009_V1 #####

 

Sat Sep 26 14:57:00 UTC 2009

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

tuxbox: no IDE-Interface detected

Detected STB:

Vendor: Nokia

Model: D-BOX2

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

insmod: warning: kernel-module version mismatch

dbox2_fp_input was compiled for kernel version 2.4.37-dbox2

while this kernel is version 2.4.37.6-dbox2

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

 

KEYWELT Pre-Configuration Part 1

 

�debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: LCD init error -1

debug: WATCHDOG RESET

debug: BMon V1.2 mID 01

debug: feID dd gtxID 0b

debug: fpID 5a dsID 01-e2.70.cb.05.00.00-8f

debug: HWrev 09 FPrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036debug: Got Block #0040debug: Got Block #0044

 

will verify ELF image, start= 0x800000, size= 171660

verify sig: 262

Branching to 0x40000

[MacFco]

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: LCD init error -1

debug: BMon V1.2 mID 01

Stichwort für die Suche: "LCD init error"

 

Z.B. komisches Problem mit Nokia Dbox2

 

Reparaturadressen Oder hast du das LCD-Display abgesteckt?

[zebralao]

Bootet die Box denn nur mit Display?

[MacFco]

Sorry, war wohl etwas missvertsändlich.

 

Bootet auch ohne Display, nur hast du dann eben auch diese Fehlermeldung,

deshalb meine Frage.

 

Nach der "KEYWELT Pre-Configuration Part 1" müsste folgende Ausgabe kommen...

 

avia_av: $Id: avia_av_core.c,v 1.100 2009/09/11 05:58:41 rhabarber1848 Exp $
avia_av_core: Starting avia_av_wdt thread.

...und das tut es schon nicht mehr. Könnte/Dürfte also ein Avia-Hardware-Problem

sein.

[rhabarber1848]

Schon einen Speichertest gemacht?

http://www.keywelt-board.com/index.php?showtopic=153946&view=findpost&p=1191998

[zebralao]

und der Speichertest .......

 

Flash-FS boots���debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: LCD init error -1

debug: BMon V1.2 mID 01

debug: feID dd gtxID 0b

debug: fpID 5a dsID 01-e2.70.cb.05.00.00-8f

debug: HWrev 09 FPrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

debug: &_text 0x10000, &_etext 0x26218, &_data 0x26218, &_edata 0x29d08

debug: &_end 0x34894, &__stack 0x400000

debug: Memory tests (0x400000 -- 0x2000000)

debug: NumberTest: debug: passed

debug: MarchTest: debug: passed

debug: PermTest: debug: passed