Xabbu Geschrieben 21. Juli 2009 Melden Share Geschrieben 21. Juli 2009 Habe hier eine Sagembox Kabel die leider keine Kanäle mehr findet, ich habe nun schon verschiedene Images drauf gemacht, alte zapits durchprobiert und immer wieder Sendersuchläufe gestartet. Ich weiß nicht mehr weiter... Ich habe mal einen Bootlog erstellt, kann einer der Boardexperten daraus was verdächtiges ersehen? ïdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS debug: BMon V1.3 mID 03 debug: feID 00 enxID 03 debug: fpID 52 dsID 01-52.14.4a.08.00.00-c0 debug: HWrev 61 FPrev 0.23 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036debug: Got Block #0040 will verify ELF image, start= 0x800000, size= 163284 verify sig: 262 Branching to 0x40000 U-Boot 1.2.0 (Tuxbox) (May 23 2009 - 13:09:58) CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Sagem, BMon V1.3 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: . . | / . - \ | / - \ done. env: found console with value ttyS0 env: found lcd_inverse with value 0 env: found lcd_contrast with value 15 FB: ready In: serial Out: serial Err: serial Net: SCC ETHERNET LCD: ready Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 1 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 670534 bytes loaded to 0x100000 ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 670470 Bytes = 654.8 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.37-dbox2 (image@Server) (gcc version 3.4.6) #14 Sa Mai 23 13:10:47 CEST 2009 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0,9600 dbox_duplex= root=/dev/mtdblock2 rootfstype=squashfs Decrementer Frequency = 247500000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x2000) Console: colour dummy device 80x25 Calibrating delay loop... 65.74 BogoMIPS Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc. squashfs: version 3.0 (2006/03/15) Phillip Lougher i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured half-duplex mode enabled eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:3e:1b:a4 loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "FLFS (U-Boot)" 0x00040000-0x005e0000 : "root (squashfs+lzma)" 0x005e0000-0x00800000 : "var (jffs2)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init init started: BusyBox v1.7.2 (2009-05-23 13:18:33 CEST) mount: using /etc/fstab ##### Image-Version: Keywelt_Mai2009_V1 ##### Sat May 23 13:47:00 UTC 2009 event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $ tuxbox: no IDE-Interface detected Detected STB: Vendor: Sagem Model: D-BOX2 [i2c-8xx]: mpc 8xx i2c init [i2c-8xx]: adapter: 0 $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $ $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $ DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600). dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $ avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $ avia_av_core: Starting avia_av_wdt thread. avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $ avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $ avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $ avia_gt_core: autodetecting chip type... eNX avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $ avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $ avia_gt_ucode: loaded ucode v0014 avia_gt_ucode: ucode section filters disabled. avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning... avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $ avia_gt_pcm_set_rate(44100) avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $ avia_gt_core: Loaded AViA eNX/GTX driver avia_av_core: Starting avia_gt_wdt thread. avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $ avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $ avia_gt_pcm_set_rate(44100) avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $ DVB: registering frontend 0:0 (Atmel AT76C651A with TUA6010XS)... avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $ avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $ DBox2 Multicam Driver v1.01 skars & doz21 :) Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.292 2009/05/05 18:57:39 rhabarber1848 Exp $ [sectionsd] Caching max 1500 events [sectionsd] Caching 4 days [sectionsd] Caching 12 hours Extended Text [sectionsd] Events are old 120min after their end time /var/tuxbox/config/zapit/epgfilter.xml: No such file or directory /var/tuxbox/config/mybouquets.xml: No such file or directory [ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading. [timerd] woke up from timer? false! /var/plugins/operations camd_init /var/plugins/operations cardserver_start $Id: zapit.cpp,v 1.429k 2009/05/12 18:25:00 seife & Worschter & SnowHead Exp $ [zapit] MAX_SOCKETS=3 [zapit] PMT update enabled [frontend] uncommitted_switch_mode 0 auto_fec 0 [getservices] /var/tuxbox/config/zapit/myservices.xml found. /var/plugins/operations camd_start /tmp/currentservices.xml: No such file or directory [controld] Boxtype detected: (3, Sagem D-BOX2) [controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1 [CVideo::setVideoFormat] output format: 4:3(LB) starte camd2 [camd2] EMM : active [camd2] Socket=/tmp/camd.sock02 [camd] ca system id: 1722 [yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0) [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular) [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular) [LCDFONT] Intializing font cache... [yhttpd] Webserver starting... /var/plugins/operations sect_renice neutrino: /lib/libpng12.so.0: no version information available (required by neutrino) starting /bin/neutrino [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... [LCDFONT] FTC_Face_Requester (Fix14/Bold) /dev/input/event1: No such file or directory [neutrino] menue setup [neutrino] found esound, adding to mainmenue/personalize [neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument) [neutrino] setRepeat: delay=150 period=125 use kernel-repeat: no [neutrino] registering as event client [sectionsd] getUTC: read: Connection timed out [LCDFONT] FTC_Face_Requester (Fix15/Bold) [zapit] LOCK LOST! trying rezap... channel: 'Astro TV' [basicsocket] receive timed out. waiting process 359 [neutrino] no file /var/tuxbox/config/init.end was found [neutrino] initialized everything busy /tmp/zapit.sock zap failed! [basicsocket] send_data: Broken pipe (n = 8/8, pid = 294) [zapit] LOCK LOST! trying rezap... channel: 'Astro TV' [zapit] LOCK LOST! trying rezap... channel: 'Astro TV' [zapit] LOCK LOST! trying rezap... channel: 'Astro TV' [zapit] LOCK LOST! trying rezap... channel: 'Astro TV' [sectionsd] getUTC: read: Connection timed out [zapit] LOCK LOST! trying rezap... channel: 'Press TV (engl)' [zapit] LOCK LOST! trying rezap... channel: 'Sky Sport 2' [basicsocket] receive timed out. waiting process 359 zap failed! busy /tmp/zapit.sock [basicsocket] send_data: Broken pipe (n = 4/4, pid = 294) [zapit] LOCK LOST! trying rezap... channel: 'Sky Sport 2' [basicsocket] receive timed out. waiting process 359 busy /tmp/zapit.sock [basicsocket] send_data: Broken pipe (n = 4/4, pid = 294) [zapit] LOCK LOST! trying rezap... channel: 'Press TV (engl)' [basicsocket] receive timed out. waiting process 359 zap failed! busy /tmp/zapit.sock [basicsocket] send_data: Broken pipe (n = 4/4, pid = 294) [sectionsd] getUTC: read: Connection timed out zap failed! [zapit] LOCK LOST! trying rezap... channel: 'Press TV (engl)' [zapit] LOCK LOST! trying rezap... channel: 'Press TV (engl)' [zapit] LOCK LOST! trying rezap... channel: 'Press TV (engl)' [zapit] LOCK LOST! trying rezap... channel: 'Press TV (engl)' [zapit] LOCK LOST! trying rezap... channel: 'Astro TV' zap failed! [zapit] LOCK LOST! trying rezap... channel: 'Astro TV' [sectionsd] getUTC: read: Connection timed out [zapit] LOCK LOST! trying rezap... channel: 'sonnenklar.TV' zap failed! [zapit] LOCK LOST! trying rezap... channel: 'Tele 5' zap failed! [zapit] LOCK LOST! trying rezap... channel: 'Tele 5' [zapit] LOCK LOST! trying rezap... channel: 'Tele 5' [sectionsd] getUTC: read: Connection timed out [zapit] LOCK LOST! trying rezap... channel: 'Tele 5' [LCDFONT] FTC_Face_Requester (Fix12/Regular) [zapit] LOCK LOST! trying rezap... channel: 'Tele 5' [zapit] LOCK LOST! trying rezap... channel: 'Tele 5' [zapit] LOCK LOST! trying rezap... channel: 'Tele 5' [zapit] LOCK LOST! trying rezap... channel: 'Tele 5' Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
newcode Geschrieben 21. Juli 2009 Melden Share Geschrieben 21. Juli 2009 Hi. Ich seh da nichts besonderes, außer das Du Null Empfang hast. Du solltest mal testen ob am Durchschliff der Box das analoge Signal anliegt. Gruß newcode Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge
Archiviert
Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.