Jump to content

Erbse7

Full Member
  • Gesamte Inhalte

    18
  • Benutzer seit

  • Letzter Besuch

Reputation in der Community

0 Neutral

Über Erbse7

  • Rang
    Facharbeiter
  • Geburtstag 02.09.1960

Profile Information

  • Gender
    Male
  1. So, wen es interessiert:der FP hat sich verabschiedet und da ich nur noch einen Sagem hatte,kann ich berichten,dass der auch in einer Nokia läuft. Danke für euer Interesse
  2. Hallo an Alle, meine Box bleibt bei 5Balken stehen.Mit Hallenberg geht gar nichts,der Bootloader sagt: Image geflasht müsste laufen.Tut es aber nicht. Der Bootlog sieht so aus: mehr kommt nicht. Weiss jemand was im Eimer ist? Danke
  3. habs nochmal gemacht,mit einem anderen Board.Jetzt gehts. hab warscheinlich ne Leiterbahn verbrannt. Danke Erbse
  4. Hallo und guten Morgen, Nachdem ich den Tuner der Sagem gewechselt habe kommt die Meldung kanal z.Z. nicht verfügbar.Fertige Settings hab ich auch schon probiert.Die Daten (bei der ARD) BER 0,SNR 49501,SIG 57558,BIT 0.Uhrzeit syncronisiert sich auch nicht.Transponder werden nicht gefunden.Image V1 vom Jan. Weiss jemand was? Dank im Voraus Erbse
  5. Erbse7

    kein Kanal zu empfangen

    Spannungen stehen bei 9,5V und 12,8V.Meine Nokia läuft o.Prob. Ich nehme an der LNBK IC is hin.Werd mir einen bestellen. Gruss Erbse
  6. Erbse7

    kein Kanal zu empfangen

    Ja,hab alles eingestellt.Die Box lief bis Herbst vorigen Jahres.(stand im Garten)Die Tatsache das sich die Uhrzeit nicht mal synconisiert,lässt mich vermuten,dass es sich um einen Tunerschaden handelt. Kann man das aus dem Log herauslesen?
  7. Erbse7

    kein Kanal zu empfangen

    Hallo an Alle, Hab hier ne Sagem 1x Sat mit dem letzten K-img.drauf.Die Box empfängt keine Kanäle.Hab schon neuen Settings draufgemacht. Die Werte: BER 262143 SNR 46260 SIG 14906 Bit 0 Der Log: Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 1 0 ............................................................... done Un-Protected 63 sectors ### FS (squashfs) loading 'vmlinuz' to 0x200000 ### FS load complete: 671052 bytes loaded to 0x200000 ## Booting kernel from Legacy Image at 00200000 ... Image Name: Linux-2.4.37.6-dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 670988 Bytes = 655.3 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.37.6-dbox2 (image@Server) (gcc version 3.4.6) #26 Sa Sep 26 14:37:12 CEST 2009 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600 dbox_duplex= Decrementer Frequency = 247500000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x2000) Console: colour dummy device 80x25 Calibrating delay loop... 65.74 BogoMIPS Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc. squashfs: version 3.0 (2006/03/15) Phillip Lougher i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured half-duplex mode enabled eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:31:35:76 loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "FLFS (U-Boot)" 0x00040000-0x005e0000 : "root (squashfs+lzma)" 0x005e0000-0x00800000 : "var (jffs2)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init init started: BusyBox v1.14.4 (2009-09-26 14:42:24 CEST) starting pid 8, tty '': '/etc/init.d/rcS' mount: using /etc/fstab ##### Image-Version: Keywelt_Sep2009_V1 ##### Sat Sep 26 14:57:00 UTC 2009 event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $ tuxbox: no IDE-Interface detected Detected STB: Vendor: Sagem Model: D-BOX2 [i2c-8xx]: mpc 8xx i2c init [i2c-8xx]: adapter: 0 insmod: warning: kernel-module version mismatch dbox2_fp_input was compiled for kernel version 2.4.37-dbox2 while this kernel is version 2.4.37.6-dbox2 $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $ $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $ DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600). dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $ avia_av: $Id: avia_av_core.c,v 1.100 2009/09/11 05:58:41 rhabarber1848 Exp $ avia_av_core: Starting avia_av_wdt thread. avia_av: AVIA 600L found. avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $ avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $ avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $ avia_gt_core: autodetecting chip type... eNX avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $ avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $ avia_gt_ucode: loaded ucode v0014 avia_gt_ucode: ucode section filters disabled. avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning... avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $ avia_gt_pcm_set_rate(44100) avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $ avia_gt_core: Loaded AViA eNX/GTX driver avia_av_core: Starting avia_gt_wdt thread. avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $ avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $ avia_gt_pcm_set_rate(44100) avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $ DVB: registering frontend 0:0 (VES1993)... avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $ avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $ insmod: warning: kernel-module version mismatch multicam was compiled for kernel version 2.4.37-dbox2 while this kernel is version 2.4.37.6-dbox2 DBox2 Multicam Driver v1.01 skars & doz21 starting pid 174, tty '': '/etc/init.d/start' Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.306 2009/09/14 13:33:28 seife Exp $ [sectionsd] Caching max 1500 events [sectionsd] Caching 4 days [sectionsd] Caching 12 hours Extended Text [sectionsd] Events are old 120min after their end time /var/tuxbox/config/zapit/epgfilter.xml: No such file or directory /var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory /var/tuxbox/config/mybouquets.xml: No such file or directory [ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading. [timerd] woke up from timer? false! /var/plugins/operations camd_init /var/plugins/operations cardserver_start $Id: zapit.cpp,v 1.440k 2009/09/18 20:30:00 rhabarber1848 & Worschter & SnowHead Exp $ [zapit] PMT update enabled [frontend] uncommitted_switch_mode 0 auto_fec 0 /var/plugins/operations camd_start starte camd2 [camd2] EMM : active [camd2] Socket=/tmp/camd.sock02 [camd] ca system id: 1702 [getservices] /var/tuxbox/config/zapit/myservices.xml found. [getservices] dup transponder id 3 onid 85 [getservices] dup transponder id 11 onid 85 [getservices] dup transponder id 2 onid 85 [getservices] dup transponder id 1 onid 85 /var/tuxbox/config/zapit/ubouquets.xml: No such file or directory /tmp/currentservices.xml: No such file or directory [controld] Boxtype detected: (3, Sagem D-BOX2) [controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1 [CVideo::setVideoFormat] output format: 4:3(LB) /bin/nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0) [yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0) [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular) [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular) [LCDFONT] Intializing font cache... [yhttpd] Webserver starting... /var/plugins/operations sect_renice neutrino: /lib/libpng12.so.0: no version information available (required by neutrino) neutrino: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0) [sectionsd] getUTC: read: Connection timed out starting /bin/neutrino [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] enable flash [neutrino] Software update enabled [neutrino] error creating /var/share/tuxbox/neutrino/icons/ [neutrino] error creating /var/share/tuxbox/neutrino/lcdd [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... [LCDFONT] FTC_Face_Requester (Fix14/Bold) [rcinput] no file /var/tuxbox/config/rc.conf was found /dev/input/event1: No such file or directory [neutrino] menue setup [neutrino] found esound, adding to mainmenue/personalize [neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument) [neutrino] setRepeat: delay=150 period=125 use kernel-repeat: no [neutrino] received 29 sats [neutrino] registering as event client [LCDFONT] FTC_Face_Requester (Fix15/Bold) [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [basicsocket] receive timed out. waiting process 441 [neutrino] no file /var/tuxbox/config/init.end was found [neutrino] initialized everything busy /tmp/zapit.sock [basicsocket] send_data: Broken pipe (n = 8/8, pid = 389) zap failed! [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' Hat jemand ein Plan? Danke Erbse
  8. Is ne Kabel ohne Platte. Noch mal der Log: debug: BMon V1.2 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID http://Hallenberg.com debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.0.101, My IP 192.168.0.202 debug: Sending TFTP-request for file u-boot will verify ELF image, start= 0x800000, size= 140064 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 U-Boot 1.3.4 (Tuxbox - Hallenberg.com) (Nov 29 2008 - 23:53:59) CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.0.101; our IP address is 192.168.0.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 192.168.0.101; our IP address is 192.168.0.202 Filename 'logo-lcd'. Load address: 0x100000 Loading: ## done Bytes transferred = 7680 (1e00 hex) BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.0.101; our IP address is 192.168.0.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 192.168.0.101; our IP address is 192.168.0.202 Filename 'logo-fb'. Load address: 0x100000 Loading: #################################### done Bytes transferred = 179877 (2bea5 hex) Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 Using SCC ETHERNET device TFTP from server 192.168.0.101; our IP address is 192.168.0.202 Filename 'kernel-cdk'. Load address: 0x100000 Loading: ################################################################# ########################################################## done Bytes transferred = 627048 (99168 hex) Using SCC ETHERNET device TFTP from server 192.168.0.101; our IP address is 192.168.0.202 Filename 'u-initrd'. Load address: 0x400000 Loading: ################################################################# ################################################## done Bytes transferred = 586812 (8f43c hex) ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 626984 Bytes = 612.3 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at 00400000 ... Image Name: Ramdisk Image Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 586748 Bytes = 573 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Ramdisk to 01f1f000, end 01fae3fc ... OK Linux version 2.4.36.9-dbox2 (Hallenberg.com) (gcc version 3.4.6) #1 Sa 29. Nov 23:29:22 CET 2008 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/ram rw ip=192.168.0.202:192.168.0.101:::::off Decrementer Frequency = 252000000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0) Console: colour dummy device 80x25 Calibrating delay loop... 66.96 BogoMIPS Memory: 30348k available (1048k kernel code, 324k data, 72k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGÿttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured half-duplex mode enabled eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:45:01:9b RAMDISK driver initialized: 16 RAM disks of 3333K size 1024 blocksize D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank Intel/Sharp Extended Query Table at 0x0035 cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "FLFS (U-Boot)" 0x00040000-0x006a0000 : "root (rootfs)" 0x006a0000-0x00800000 : "var (jffs2)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) IP-Config: Guessing netmask 255.255.255.0 IP-Config: Complete: device=eth0, addr=192.168.0.202, mask=255.255.255.0, gw=255.255.255.255, host=192.168.0.202, domain=, nis-domain=(none), bootserver=192.168.0.101, rootserver=192.168.0.101, rootpath= NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 572k freed EXT2-fs warning: checktime reached, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev Freeing unused kernel memory: 72k init init started: BusyBox v1.13.0 (2008-11-29 23:52:02 CET lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface dbox2 - ImageFlashingAssistent 3.x - Hallenberg.com - Schreibe Backup: 8064k von 8064k (100%) Lade Flashimage... done. Sende Backup... Lösche Sektoren: 63 von 63 (100%) Schreibe Daten: 8064k von 8064k (100%) Verifziere Daten: 8064k von 8064k (100%) Sie koennen die dbox jetzt ausschalten. ------------------------------------------------------------- BootP: Request von 00509C45019B erhalten Error DeleteIpNetEntry: Falscher Parameter. BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C45019B gesetzt BootP: Antwort an 00509C45019B gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\u-boot TFTP: Transfer erfolgreich beendet BootP: Request von 00509C45019B erhalten BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C45019B gesetzt BootP: Antwort an 00509C45019B gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\logo-lcd TFTP: Transfer erfolgreich beendet BootP: Request von 00509C45019B erhalten BootP: ARP-Eintrag mit IP: 192.168.0.202 und Mac: 00509C45019B gesetzt BootP: Antwort an 00509C45019B gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\logo-fb TFTP: Transfer erfolgreich beendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\kernel-cdk TFTP: Transfer erfolgreich beendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\u-initrd TFTP: Transfer erfolgreich beendet TFTP: Sende C:\Dokumente und Einstellungen\Eigene Dateien\Keywelt_V1_September_2x_SQUASHFS_2009\Keywelt_V1_September_2x_SQUASHFS_2009.img TFTP: Transfer erfolgreich beendet TFTP: Schreibe Backup nach C:\Programme\DBOX_IFA\Backups\2009-12-27 10-19-17_446.img TFTP: Transfer erfolgreich beendet ------ Zusatzinformationen ------ Gewählter Netzwerkadapter: Intel® PRO/100 VE Network Connection - Paketplaner-Miniport (0) IP-Adresse des Netzwerkadapters: 192.168.0.101 IP-Adresse die die dbox bekommt: 192.168.0.202 Betriebssystem: Microsoft Windows XP Professional Service Pack 3 (Build 2600) CPU 1: Intel® Pentium® D CPU 3.40GHz @ 3401 MHz CPU 2: Intel® Pentium® D CPU 3.40GHz @ 3401 MHz Dateiname des Images: Keywelt_V1_September_2x_SQUASHFS_2009.img Imagetyp: Zwei Flashs DBOX-IFA Version: 3.2 ------ Powered by http://www.dboxservice-hallenberg.de ------
  9. Erbse7

    Nokia 2x ohne Bild und Ton

    Moin und frohes Fest an Alle, Als ich heut morgen meine Box gestartet hab,war kein Bild und kein Ton mehr da. Der Log: Cdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.2 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID 01-29.cf.82.07.00.00-f4 debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0032debug: Got Block #0004debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036 will verify ELF image, start= 0x800000, size= 162992 verify sig: 262 Branching to 0x40000 U-Boot 1.2.0 (Tuxbox) (Jan 18 2008 - 21:28:14) CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: . . | / . - . \ | / - \ done. env: found "console" env: found "lcd_inverse" env: found "lcd_contrast" FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 1 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 669940 bytes loaded to 0x100000 ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 669876 Bytes = 654.2 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.36-dbox2 (image@Server) (gcc version 3.4.6) #11 Fr Jan 18 21:28:45 CET 2008 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rootfstype=squashfs Decrementer Frequency = 252000000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0) Console: colour dummy device 80x25 Calibrating delay loop... 66.96 BogoMIPS Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc. squashfs: version 3.0 (2006/03/15) Phillip Lougher i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:45:01:9b loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank Intel/Sharp Extended Query Table at 0x0035 cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "FLFS (U-Boot)" 0x00040000-0x005e0000 : "root (squashfs)" 0x005e0000-0x00800000 : "var (jffs2)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init init started: BusyBox v1.7.2 (2008-01-18 21:32:56 CET) ##### Image-Version: Keywelt_Jan2008_V2 ##### Fri Jan 18 21:48:00 UTC 2008 event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $ Detected STB: Vendor: Nokia Model: D-BOX2 [i2c-8xx]: mpc 8xx i2c init [i2c-8xx]: adapter: 0 Oops: kernel access of bad area, sig: 11 NIP: C00AF790 XER: 00000000 LR: C388DB84 SP: C1C63E30 REGS: c1c63d80 TRAP: 0300 Not tainted MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 00000024, DSISR: C0000000 TASK = c1c62000[59] 'insmod' Last syscall: 128 last math 00000000 last altivec 00000000 GPR00: C388DB84 C1C63E30 C1C62000 C38907E0 C38907B9 00000005 00000018 C1C6203C GPR08: 00000000 00000001 00000029 C00AF778 24008042 10080CB4 10060000 00000001 GPR16: 10080000 1007CB2F 10083C80 100839C0 00009032 C1C63EA0 C1BB4000 10093D84 GPR24: C1CDC580 00000003 C3892000 C013C5C4 C3890000 00000005 00000000 00000000 Call backtrace: C388F3DC C388DB84 C388F9D0 C0011108 C000285C 1002EB5C 10003D14 10003D4C 10003F0C 0FEB244C 00000000 Segmentation fault i2c-core.o: driver saa7126 registered. i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](pos. 1). $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $ i2c-core.o: driver DBox2-CAM registered. i2c-core.o: client [DBox2-CAM] registered to adapter [PowerPC 8xx I2C adapter](pos. 2). $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $ DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600). i2c-core.o: driver DVB I2C bridge registered. i2c-core.o: client [DVB I2C bridge] registered to adapter [PowerPC 8xx I2C adapter](pos. 3). dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $ avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $ avia_av_core: Starting avia_av_wdt thread. avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $ avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $ avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $ avia_gt_core: autodetecting chip type... GTX avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $ avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $ avia_gt_core: masking unhandled irq reg 1 bit 11 avia_gt_core: masking unhandled irq reg 1 bit 13 avia_gt_ucode: loaded ucode v0014 avia_gt_ucode: ucode section filters disabled. avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning... avia_gt_core: masking unhandled irq reg 0 bit 6 avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $ avia_gt_pcm_set_rate(44100) avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $ avia_gt_core: Loaded AViA eNX/GTX driver avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $ avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $ avia_gt_pcm_set_rate(44100) avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $ DVB: VES1820(0): pwm=0x47 (user specified) DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)... avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $ avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $ Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.259 2008/01/12 16:57:22 seife Exp $ [sectionsd] Caching max 3000 events [sectionsd] Caching 7 days [sectionsd] Caching 6 hours Extended Text [sectionsd] Events are old 60min after their end time /var/tuxbox/config/zapit/epgfilter.xml: No such file or directory /var/tuxbox/config/mybouquets.xml: No such file or directory [eitThread] pid 185 start /var/plugins/operations camd_init $Id: zapit.cpp,v 1.403 2007/11/08 19:32:15 Kroki & Worschter & SnowHead Exp $ /var/plugins/operations cardserver_start [zapit] MAX_SOCKETS=3 [zapit] PMT update enabled [frontend] uncommitted_switch_mode 0 avia_gt_core: masking unhandled irq reg 0 bit 7 [getservices] /var/tuxbox/config/zapit/myservices.xml found. /var/plugins/operations camd_start DBox2 Multicam Driver v1.01 skars & doz21 starte camd2 [camd2] EMM : active [camd2] Socket=/tmp/camd.sock02 [camd] ca system id: 1722 /tmp/currentservices.xml: No such file or directory $Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $ [controld] Boxtype detected: (1, Nokia D-BOX2) [controld] /dev/dbox/avs0: No such file or directory [controld] /dev/dbox/avs0: No such file or directory [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1 [controld] /dev/dbox/avs0: No such file or directory [controld] format: 4:3(LB) [controld] /dev/dbox/avs0: No such file or directory [yhttpd] Webserver nhttpd/3.1.6 (yhttpd_core/1.2.0) [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular) [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular) [LCDFONT] Intializing font cache... [yhttpd] Webserver starting... /var/plugins/operations sect_renice /var/plugins/operations epg_reinit neutrino: /lib/libpng12.so.0: no version information available (required by neutrino) starting /bin/neutrino [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [sectionsd] getUTC: read: Connection timed out [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... [LCDFONT] FTC_Face_Requester (Fix15/Bold) [LCDFONT] FTC_Face_Requester (Fix14/Bold) /dev/input/event1: No such file or directory [neutrino] menue setup [neutrino] registering as event client [neutrino] initialized everything zap failed! Weiss jemand was los ist Dank im Voraus Gruss Erbse
  10. Moin, Also bei meiner Sagem grau,2x Ship,läuft das Januar Img.seit gestern ohne Unterlass stabil. Die Rede ist von allen Sendern ausser KD.Dort kommt es ab und an zu Zwitschereinlagen.Aber wer will das schon sehen. Sehr gute Arbeit,dank an die Macher Gruss Erbse
  11. Erbse7

    Kein Emfang

    Nabend @all, hab ein kleines Prob.Bin gerade in eine neue Wohnung gezogen,Schüssel mit einem no Name Receiver eingerichtet.Das Signal 78% und die Quali 80%. Alle Sender da.Aber weder bei der Sagem noch bei der Nokia Emfang.Sig.42000 BER265000 SNR Ca22000. Weiss wer,was das sein kann? Img is jeweils Nov drauf. Dank im voraus Erbse
  12. Hi @all, Ich glaube,dass ich mich zu früh gefreut habe.Hat sich schon 4x aufgehenkt,aber immernoch kein Zwitschern. Bilder reich ich nach. Gruss Erbse
  13. Moin @ all, Habe gestern den verbrannten Widerstand (1k 1/4 Watt) gewechselt.(Netzteil) Die Box lief die ganze Nacht,ist zwar irgendwann mal stehengeblieben aber ohne Zwitschern.Heut morgen einmal hochgeschalten und sie lief weiter.Hab das V4 September drauf. Am Ende hilfts ja weiter? Gruss Erbse
  14. Hi @all, Hiermit zeige ich an,dass auf einer grauen Sagem Kabel 2x das Sep-Img & mgcamd,seit 24 Std ohne Störung läuft. Ab und an geht das Bild weg,aber einmal hin&her geschaltet-läuft problemlos. -kein zwitschern- Gruss Erbse
×
×
  • Neu erstellen...