masteromaar

danke an alle! hat endlich geklappt! habe eine box mit keyweltKEYWELT_V5_JANUAR_2x_SQUASHFS_2006 bespielt und die andere mit 2x_md_image_v2_upd_07032006.

dort sthet sending flash over udp und dann immer weider nochmal nochmal ........

habe jetzt .did wiederherstellen gemacht und die .did ohne name einfach auf dem ordner was angegeben wurde gespeichert! jetzt steht im bootmanager-fenster die ganze zeit nochmal nochmal nochmal ... )endlosschleife)

mit bootmanager tut sich was! es steht jetzt: Flashen abgeschlossen, DBox neu starten, eigentlich sollte alles wieder gehen! Wenn eine BR-Soft geflasht wurde (und das Image NICHT von euch selbst stammte..?), muß danach die Datei .did ausgetauscht werden (siehe readme). Wenn ihr aus dem internen Flash booten wollt, schaltet den BooTP aus! was soll ich machen???? Heh????

wie kann ich mediasensing abstellen? oder ist es bei mir schon abgestellt?

habe norton komplett deinstalliert aber trotzdem: debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID http://Hallenberg.com debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS will verify ELF image, start= 0x800000, size= 203252 verify sig: 262 Branching to 0x40000 PPCBoot 1.1.6 (TuxBox) (Jul 12 2002 - 20:57:43) CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache Watchdog enabled Board: DBOX2, Nokia I2C: ready DRAM: 32 MB FLASH: 8 MB LCD: ready FB: loading - ready In: serial Out: serial Err: serial Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select (1-3), other keys to stop autoboot: 1 0 ............................................................... Un-Protected 63 sectors ### FS (cramfs) loading 'vmlinuz' to 0x100000 ### FS load compleate: 582785 bytes loaded to 0x100000 ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 582721 Bytes = 569 kB = 0 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK /etc/init.d/init1: /bin/aniplay: No such file or directory Init VES1820 VES1820: attached to adapter CXA2092 found CXA2092 found killall: aniplay: no process killed cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $ [TIMERD]IDS: 0 $Id: sectionsd.cpp,v 1.128 2002/08/27 19:00:45 obi Exp $ caching 504 hours events are old 60min after their end time [camd] no card is in slot #2 [camd] no card is in slot #1 [camd] no card is in slot #2 [camd] no card is in slot #1 [camd] ca system id: 1702 $Id: zapit.cpp,v 1.216 2002/09/04 13:57:39 neBox Exp $ [getservices.cpp] going to parse cable Telekom/Ish [zapit] LoadServices: success [zapit] reading Bouquets ................................................ [zapit] Found 48 bouquets. [zapit:bouquets.cpp:renumServices] In Bouquets: TV Channels #: 82, Radio Channels #: 44. [zapit:bouquets.cpp:makeRemainingChannelsBouquet] TV Channels #: 156, Radio Channels #: 92. [zapit] channels have been loaded succesfully killall: aniplay: no process killed Network LCD-Driver $Id: lcdd.cpp,v 1.54 2002/08/31 22:30:27 obi Exp $ [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [lcdd] load config initializing core... adding font /share/fonts/micron.ttf...OK (Micron/Regular) Intializing font cache... FTC_Face_Requester (Micron/Regular) Controld $Id: controld.cpp,v 1.61 2002/08/27 19:00:45 obi Exp $ [controld] Boxtype detected: (01, 1, 1, Nokia) [neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.318 2002/09/07 16:33:46 dirch Exp $ [neutrino] frameBuffer Instance created [neutrino] vcrControl Instance created 1024k video mem [neutrino] enable flash [neutrino] Software update enabled IP : 192.168.115.2 Netmask : 255.255.255.0 Broadcast: 192.168.115.255 Gateway : CVCRControl registered new serverdevice: 0 ngrab [neutrino] menue setup [CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/ [CHTTPUpdater] Image-Filename: cdk.cramfs [CHTTPUpdater] Version-Filename: cdk.cramfs.version scandir: No such file or directory [neutrino] control event register [neutrino] sectionsd event register [neutrino] zapit event register [neutrino] timerd event register [CFrontend::setFrontend] freq 354000 [CPlugins] Dir: /lib/tuxbox/plugins/ [CPlugins] 13 plugins found... [CFrontend::getEvent] timeout zap failed! initial zap failed - rezap [CFrontend::setFrontend] freq 354000 ------ Zusatzinformationen ------ Gewählter Netzwerkadapter: Realtek RTL8139/810x Family Fast Ethernet NIC (0) IP-Adresse des Netzwerkadapters: 192.168.115.1 IP-Adresse die die dbox bekommt: 192.168.115.202 Comport: Kommunikationsanschluss (COM1) Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600) CPU 1: Intel® Pentium® 4 CPU 1500MHz @ 1517 MHz Dateiname des Images: 2x_md_image_v2_upd_07032006.img Imagetyp: Zwei Flashs DBOX-IFA Version: 2.0 ------ Powered by http://www.dboxservice-hallenberg.de ------

was meinst du mit mediasensing? habe es mit regedit gefunden aber was soll ich damit machen? ich hoffe du meinst diese: HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\T cpip\Parameters und dort die datei: Name: disableDHCPMediasSensing Typ: REG_DWORD Wert: 0x00000001 (0) was muss ich jetzt machen?

hallo, habe nun mir heute morgen ein neues nullmodemkabel gekauft aber es geht trotzdem nicht. geht aber bei zwei verschiedenen nokia dbox2 nicht. benutze xp sp2 und schalte den wurmschutz + firewall + antzivirussoftware von norton ab. netzwerkeinstellung sind o.k. 10 mb halfduplex ip dbox. 192.162.115.2 ip karte 192.168.115.1 prog ist flashassistent keine ahnung was ich falsch mache? fehlermeldung: debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID http://Hallenberg.com debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS will verify ELF image, start= 0x800000, size= 203252 verify sig: 262 Branching to 0x40000 PPCBoot 1.1.6 (TuxBox) (Jul 12 2002 - 20:57:43) CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache Watchdog enabled Board: DBOX2, Nokia I2C: ready DRAM: 32 MB FLASH: 8 MB LCD: ready FB: loading - ready In: serial Out: serial Err: serial Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select (1-3), other keys to stop autoboot: 1 0 ............................................................... Un-Protected 63 sectors ### FS (cramfs) loading 'vmlinuz' to 0x100000 ### FS load compleate: 582785 bytes loaded to 0x100000 ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 582721 Bytes = 569 kB = 0 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK /etc/init.d/init1: /bin/aniplay: No such file or directory Init VES1820 VES1820: attached to adapter CXA2092 found CXA2092 found killall: aniplay: no process killed cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $ [TIMERD]IDS: 0 $Id: sectionsd.cpp,v 1.128 2002/08/27 19:00:45 obi Exp $ caching 504 hours events are old 60min after their end time [camd] no card is in slot #2 [camd] no card is in slot #1 [camd] ca system id: 1702 $Id: zapit.cpp,v 1.216 2002/09/04 13:57:39 neBox Exp $ [getservices.cpp] going to parse cable Telekom/Ish [zapit] LoadServices: success [zapit] reading Bouquets ................................................ [zapit] Found 48 bouquets. [zapit:bouquets.cpp:renumServices] In Bouquets: TV Channels #: 82, Radio Channels #: 44. [zapit:bouquets.cpp:makeRemainingChannelsBouquet] TV Channels #: 156, Radio Channels #: 92. [zapit] channels have been loaded succesfully killall: aniplay: no process killed Network LCD-Driver $Id: lcdd.cpp,v 1.54 2002/08/31 22:30:27 obi Exp $ [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [lcdd] load config initializing core... adding font /share/fonts/micron.ttf...OK (Micron/Regular) Intializing font cache... FTC_Face_Requester (Micron/Regular) Controld $Id: controld.cpp,v 1.61 2002/08/27 19:00:45 obi Exp $ [controld] Boxtype detected: (01, 1, 1, Nokia) [neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.318 2002/09/07 16:33:46 dirch Exp $ [neutrino] frameBuffer Instance created [neutrino] vcrControl Instance created 1024k video mem [neutrino] enable flash [neutrino] Software update enabled IP : 192.168.115.2 Netmask : 255.255.255.0 Broadcast: 192.168.115.255 Gateway : CVCRControl registered new serverdevice: 0 ngrab [neutrino] menue setup [CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/ [CHTTPUpdater] Image-Filename: cdk.cramfs [CHTTPUpdater] Version-Filename: cdk.cramfs.version scandir: No such file or directory [neutrino] control event register [neutrino] sectionsd event register [neutrino] zapit event register [neutrino] timerd event register [CFrontend::setFrontend] freq 354000 [CPlugins] Dir: /lib/tuxbox/plugins/ [CPlugins] 13 plugins found... [CFrontend::getEvent] timeout zap failed! initial zap failed - rezap [CFrontend::setFrontend] freq 354000 [CFrontend::getEvent] timeout zap failed! ------ Zusatzinformationen ------ Gewählter Netzwerkadapter: Realtek RTL8139/810x Family Fast Ethernet NIC (1) IP-Adresse des Netzwerkadapters: 192.168.115.1 IP-Adresse die die dbox bekommt: 192.168.115.202 Comport: Kommunikationsanschluss (COM1) Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600) CPU 1: Intel® Pentium® 4 CPU 1500MHz @ 1517 MHz Dateiname des Images: KEYWELT_V5_JANUAR_2x_SQUASHFS_2006.img Imagetyp: Zwei Flashs DBOX-IFA Version: 2.0 ------ Powered by http://www.dboxservice-hallenberg.de ------

wie kann ich das nullmodemkabel überprüfen ob es funzt?

habe mir jetzt von meinen eltern deren alte nokia dboxII gehlot auf der eine noch ältere version von linux drauf ist als die die ich habe. bei deiser kann mann nach booten noch auswählen ob man neutrino, neutriono emu oder enigma emu haben möchte und bei dieser kriege ich die gleiche fehlermeldung wie bei meiner. kann es an dem images liegen? habe es mit 2x_md_image_v2_upd_07032006 und KEYWELT_V5_JANUAR_2x_SQUASHFS_2006 ausprobiert jedoch bei beiden gleiche fehlermeldung.

hallo SnowHead, habe es gemacht wie du es mir geschrieben hast aber dann kam wieder das: debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID http://Hallenberg.com debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS will verify ELF image, start= 0x800000, size= 203252 verify sig: 262 Branching to 0x40000 PPCBoot 1.1.6 (TuxBox) (Jul 12 2002 - 20:57:43) CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache Watchdog enabled Board: DBOX2, Nokia I2C: ready DRAM: 32 MB FLASH: 8 MB LCD: ready FB: loading - ready In: serial Out: serial Err: serial Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select (1-3), other keys to stop autoboot: 1 0 ............................................................... Un-Protected 63 sectors ### FS (cramfs) loading 'vmlinuz' to 0x100000 ### FS load compleate: 582785 bytes loaded to 0x100000 ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 582721 Bytes = 569 kB = 0 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK /etc/init.d/init1: /bin/aniplay: No such file or directory Init VES1820 VES1820: attached to adapter CXA2092 found CXA2092 found killall: aniplay: no process killed cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $ [TIMERD]IDS: 0 $Id: sectionsd.cpp,v 1.128 2002/08/27 19:00:45 obi Exp $ caching 504 hours events are old 60min after their end time [camd] no card is in slot #2 [camd] no card is in slot #1 [camd] ca system id: 1702 $Id: zapit.cpp,v 1.216 2002/09/04 13:57:39 neBox Exp $ [getservices.cpp] going to parse cable Telekom/Ish [zapit] LoadServices: success [zapit] reading Bouquets ................................................ [zapit] Found 48 bouquets. [zapit:bouquets.cpp:renumServices] In Bouquets: TV Channels #: 82, Radio Channels #: 44. [zapit:bouquets.cpp:makeRemainingChannelsBouquet] TV Channels #: 156, Radio Channels #: 92. [zapit] channels have been loaded succesfully killall: aniplay: no process killed Network LCD-Driver $Id: lcdd.cpp,v 1.54 2002/08/31 22:30:27 obi Exp $ [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [lcdd] load config initializing core... adding font /share/fonts/micron.ttf...OK (Micron/Regular) Intializing font cache... FTC_Face_Requester (Micron/Regular) Controld $Id: controld.cpp,v 1.61 2002/08/27 19:00:45 obi Exp $ [controld] Boxtype detected: (01, 1, 1, Nokia) [neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.318 2002/09/07 16:33:46 dirch Exp $ [neutrino] frameBuffer Instance created [neutrino] vcrControl Instance created 1024k video mem [neutrino] enable flash [neutrino] Software update enabled IP : 192.168.115.2 Netmask : 255.255.255.0 Broadcast: 192.168.115.255 Gateway : CVCRControl registered new serverdevice: 0 ngrab [neutrino] menue setup [CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/ [CHTTPUpdater] Image-Filename: cdk.cramfs [CHTTPUpdater] Version-Filename: cdk.cramfs.version scandir: No such file or directory [neutrino] control event register [neutrino] sectionsd event register [neutrino] zapit event register [neutrino] timerd event register [CFrontend::setFrontend] freq 354000 [CPlugins] Dir: /lib/tuxbox/plugins/ [CPlugins] 13 plugins found... [CFrontend::getEvent] timeout zap failed! initial zap failed - rezap [CFrontend::setFrontend] freq 354000 [CFrontend::getEvent] timeout zap failed! ------ Zusatzinformationen ------ Gewählter Netzwerkadapter: Realtek RTL8139/810x Family Fast Ethernet NIC (0) IP-Adresse des Netzwerkadapters: 192.168.115.1 IP-Adresse die die dbox bekommt: 192.168.115.202 Comport: Kommunikationsanschluss (COM2) Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600) CPU 1: Intel® Pentium® 4 CPU 1500MHz @ 1517 MHz Dateiname des Images: KEYWELT_V5_JANUAR_2x_SQUASHFS_2006.img Imagetyp: Zwei Flashs DBOX-IFA Version: 2.0 ------ Powered by http://www.dboxservice-hallenberg.de ------ was ist das eigentlich zap failed?

habe in einem anderen forum gelesen das ich eine andere linux-version draufspielen muss. stimmt das? beim starten der box steht folgendes auf dem display: bmon 1.0 mid 01 feID 7A stxID 0b fpID 5A dsID Edit SnowHead: keine dsID's posten! HWrev. X5 SWrev 0.81 B/Ex/Fl (MB) 32/00/08 und danach: Linux PPC Boot 1.1.6

das hier ist mein problem: debuhttp://Hallenberg.com boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS will verify ELF image, start= 0x800000, size= 203252 verify sig: 262 Branching to 0x40000 PPCBoot 1.1.6 (TuxBox) (Jul 12 2002 - 20:57:43) CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache Watchdog enabled Board: DBOX2, Nokia I2C: ready DRAM: 32 MB FLASH: 8 MB LCD: ready FB: loading - ready In: serial Out: serial Err: serial Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select (1-3), other keys to stop autoboot: 1 0 ............................................................... Un-Protected 63 sectors ### FS (cramfs) loading 'vmlinuz' to 0x100000 ### FS load compleate: 582785 bytes loaded to 0x100000 ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 582721 Bytes = 569 kB = 0 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK /etc/init.d/init1: /bin/aniplay: No such file or directory Init VES1820 VES1820: attached to adapter CXA2092 found CXA2092 found killall: aniplay: no process killed cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $ [TIMERD]IDS: 0 $Id: sectionsd.cpp,v 1.128 2002/08/27 19:00:45 obi Exp $ caching 504 hours events are old 60min after their end time [camd] no card is in slot #2 [camd] no card is in slot #1 [camd] no card is in slot #2 [camd] no card is in slot #1 [camd] ca system id: 1702 $Id: zapit.cpp,v 1.216 2002/09/04 13:57:39 neBox Exp $ [getservices.cpp] going to parse cable Telekom/Ish [zapit] LoadServices: success [zapit] reading Bouquets ................................................ [zapit] Found 48 bouquets. [zapit:bouquets.cpp:renumServices] In Bouquets: TV Channels #: 82, Radio Channels #: 44. [zapit:bouquets.cpp:makeRemainingChannelsBouquet] TV Channels #: 156, Radio Channels #: 92. [zapit] channels have been loaded succesfully killall: aniplay: no process killed Network LCD-Driver $Id: lcdd.cpp,v 1.54 2002/08/31 22:30:27 obi Exp $ [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [lcdd] load config initializing core... adding font /share/fonts/micron.ttf...OK (Micron/Regular) Intializing font cache... FTC_Face_Requester (Micron/Regular) Controld $Id: controld.cpp,v 1.61 2002/08/27 19:00:45 obi Exp $ [controld] Boxtype detected: (01, 1, 1, Nokia) [neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.318 2002/09/07 16:33:46 dirch Exp $ [neutrino] frameBuffer Instance created [neutrino] vcrControl Instance created 1024k video mem [neutrino] enable flash [neutrino] Software update enabled IP : 192.168.115.2 Netmask : 255.255.255.0 Broadcast: 192.168.115.255 Gateway : CVCRControl registered new serverdevice: 0 ngrab [neutrino] menue setup [CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/ [CHTTPUpdater] Image-Filename: cdk.cramfs [CHTTPUpdater] Version-Filename: cdk.cramfs.version scandir: No such file or directory [neutrino] control event register [neutrino] sectionsd event register [neutrino] zapit event register [neutrino] timerd event register [CFrontend::setFrontend] freq 354000 [CPlugins] Dir: /lib/tuxbox/plugins/ [CPlugins] 13 plugins found... [CFrontend::getEvent] timeout zap failed! initial zap failed - rezap [CFrontend::setFrontend] freq 354000 [CFrontend::getEvent] timeout zap failed! ------ Zusatzinformationen ------ Gewählter Netzwerkadapter: Realtek RTL8139/810x Family Fast Ethernet NIC (1) IP-Adresse des Netzwerkadapters: 192.168.115.1 IP-Adresse die die dbox bekommt: 192.168.115.202 Comport: Kommunikationsanschluss (COM2) Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600) CPU 1: Intel® Pentium® 4 CPU 1500MHz @ 1517 MHz Dateiname des Images: 2x_md_image_v2_upd_07032006.img Imagetyp: Zwei Flashs DBOX-IFA Version: 2.0 ------ Powered by http://www.dboxservice-hallenberg.de ------

hab ich geht aber immer noch nicht. klappt immer noch nicht. erklär mir doch bitte wie das gehen soll? ich habe das image ausgewählt, die netzwerkkarte zugewiesen, comanschluss mitgeteilt und dann auf weiter. habe danach wie angewiesen nullmodemkabel netzwerkabel und stromstecker angeschlossen doch es tut sich nichts. was mach ich bloss falsch?

ich habe mir den 2.0 runtergeladen. es gibt dort zwei varianten einmal mit und einmal ohne linux. ich habe die variante mit linux ausprobiert. prog ist eigentlich ganz einfach, imagedatei auswählen und netzwerkadresse der box angeben dann macht es ales von alleine. der kopiert auch alles ganz schnell allerdings hängt er sich kurz vor schluss auf, bei telenet. werde mal die version runterladen mit der du arbeitest.