Jump to content

Box Bootet nach update nicht mehr durch....NXPHD Loader Probleme


snoety

Empfohlene Beiträge

Hi, hab meine Neo beim Updaten zerschossen.

Jetzt fährt die nur noch bis ins Bootmenü hoch, im Display steht:

 

1.lade Treiber

2.bereite Neutrino Start vor

dann kommt die text nachricht HALT und die Box fährt runter

Anschließend kann ich die box über die Power Taste neu starten, jedoch passiert wieder das selber wie oben beschrieben.

 

Ich wollte mit dem NXPHD Loader alles wieder von neuem Starten und die Box quasi wieder clean machen.

Hab auch die Passenden Dateien auf nen USB stick gepackt und in die Neo vorne Reingesteckt.

 

Nach dem Neustart kann ich dann auswählen ob ich den Kernel oder das File System upgraden möchte.

Wenn ich das Filesystem auswähle gibt mir der Loader nach kurzer Zeit "unable to read "sysroot.img" from usb raus.

 

Woran kann das wohl liegen?

 

Oder muss ich vielleicht gar nicht mit dem Programm alles neu machen?

Per FTP komme ich beim Bootvorgang noch auf die BOX

bearbeitet von snoety
Link zu diesem Kommentar
Auf anderen Seiten teilen

Kann ich gleich mal machen.

Aber ich erkenne das weil die zwei Buttons nicht mehr ausgegraut sind und ich das Update des Kernels bzw der Firmware auswählen kann.

Dann macht der Loader irgendwas und später steht in der log File unable to read sysroot.img und so heißt die Datei auf dem Stick....

Link zu diesem Kommentar
Auf anderen Seiten teilen

Hi, hier mein Bootlog mit Putty

 

 

 

 

 

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.10.22 19:58:05 =~=~=~=~=~=~=~=~=~=~=~=

[2h[61"p[m[44m[37m[1m[2J[1;1H[(B[)B[?3l[?9hÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»

 

º U-Boot 2009.03-svn1556 (Mai 27 2010 - 01:23:56)     Coolstream HDx           º

 

ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹

 

º Chipset information                                                          º

 

º Vendor: Conexant  Type: CX2450x (Nevis)  Revision: D0       Fuses: 7EFE6D24  º

 

º Option: 00010000  max. clock: 600 MHz    Core voltage: high                  º

 

ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹

 

º Clock information                                                            º

 

º MPG0: 594.000 MHz  MPG1: 594.000 MHz  HD  : 593.407 MHz  AUD : 491.520 MHz   º

 

º PLL0: 432.000 MHz  PLL1: 594.000 MHz  PLL2: 533.333 MHz                      º

 

º CPU : 594.000 MHz from PLL1                                                  º

 

ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹

 

º Memory configuration                                                         º

 

º Start    ³ End      ³ Type  ³ Description                                    º

 

ºÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ

 

º 00000000 ³ 0FFFFFFF ³ RAM   ³ System main memory bank #0                     º

 

º 10000000 ³ 17FFFFFF ³ RAM   ³ System main memory bank #1                     º

 

º F0000000 ³ F1FFFFFF ³ FLASH ³ Spansion S29GL256P (256 Mbit / 16M x 16)       º

 

ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹

 

º Serial number: 008-00001858 (08-000742)                                      º

 

º *** Warning - bad CRC, using default environment ***                         º

 

ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹

 

º Network configuration                                                        º

 

º MAC: Conexant VMAC rev. 07       address: 00-C5-5C-00-07-42                  º

 

º PHY: IC Plus IP101               address: 09                                 º

 

ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

 

Hit any key to stop autoboot:  1 0 

 

## Booting kernel from Legacy Image at f0080000 ...

 

   Image Name:   Coolstream Kernel (compressed)

 

   Image Type:   ARM Linux Kernel Image (uncompressed)

 

   Data Size:    2323336 Bytes =  2.2 MB

 

   Load Address: 00048000

 

   Entry Point:  00048000

 

   Verifying Checksum ... OK

 

   Loading Kernel Image ... OK

 

OK

 

 

Starting kernel ...

 

 

Uncompressing Linux... done, booting the kernel.

 

Linux version 2.6.34.13-nevis (image@LAPTOP2) (gcc version 4.7.1 (crosstool-NG 1.19.0) ) #1 Mon Jun 16 21:04:21 CEST 2014

 

CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv7), cr=00c5387f

 

CPU: VIPT aliasing data cache, VIPT aliasing instruction cache

 

Machine: CoolStream HDx IRD

 

Memory policy: ECC disabled, Data cache writeback

 

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 97536

 

Kernel command line: console=ttyRI0 mtdparts=cx2450xflash:384k(U-Boot)ro,128k(Splash),4096k(kernel),28160k(systemFS) root=mtd3 rootfstype=jffs2 rw mem=384M

 

PID hash table entries: 2048 (order: 1, 8192 bytes)

 

Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

 

Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

 

Memory: 384MB = 384MB total

 

Memory: 384968k/384968k available, 8248k reserved, 0K highmem

 

Virtual kernel memory layout:

 

    vector  : 0xffff0000 - 0xffff1000   (   4 kB)

 

    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

 

    DMA     : 0xffc00000 - 0xffe00000   (   2 MB)

 

    vmalloc : 0x98800000 - 0xe0000000   (1144 MB)

 

    lowmem  : 0x80000000 - 0x98000000   ( 384 MB)

 

    modules : 0x7e800000 - 0x80000000   (  24 MB)

 

      .init : 0x80048000 - 0x80063000   ( 108 kB)

 

      .text : 0x80063000 - 0x80482000   (4220 kB)

 

      .data : 0x80482000 - 0x804a4de0   ( 140 kB)

 

NR_IRQS:352

 

Console: colour dummy device 80x30

 

console [ttyRI0] enabled

 

Calibrating delay loop... 593.10 BogoMIPS (lpj=2965504)

 

Mount-cache hash table entries: 512

 

CPU: Testing write buffer coherency: ok

 

NET: Registered protocol family 16

 

bio: create slab <bio-0> at 0

 

SCSI subsystem initialized

 

usbcore: registered new interface driver usbfs

 

usbcore: registered new interface driver hub

 

usbcore: registered new device driver usb

 

Advanced Linux Sound Architecture Driver Version 1.0.22.1.

 

cfg80211: Calling CRDA to update world regulatory domain

 

NET: Registered protocol family 2

 

IP route cache hash table entries: 4096 (order: 2, 16384 bytes)

 

TCP established hash table entries: 16384 (order: 5, 131072 bytes)

 

TCP bind hash table entries: 16384 (order: 4, 65536 bytes)

 

TCP: Hash tables configured (established 16384 bind 16384)

 

TCP reno registered

 

UDP hash table entries: 256 (order: 0, 4096 bytes)

 

UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

 

NET: Registered protocol family 1

 

RPC: Registered udp transport module.

 

RPC: Registered tcp transport module.

 

RPC: Registered tcp NFSv4.1 backchannel transport module.

 

NetWinder Floating Point Emulator V0.97 (double precision)

 

Installing knfsd (copyright © 1996 okir@monad.swb.de).

 

JFFS2 version 2.2. (NAND) (SUMMARY)  Â© 2001-2006 Red Hat, Inc.

 

msgmni has been set to 751

 

io scheduler noop registered

 

io scheduler deadline registered (default)

 

io scheduler cfq registered

 

ttyRI0 at MMIO 0xe0412000 (irq = 2) is a CX2450x UART

 

brd: module loaded

 

loop: module loaded

 

CX2450x MTD driver v1.0 (Jun 16 2014, 21:01:02) © Coolstream International Ltd.

 

cx2450xflash: Found 1 x16 devices at 0x0 in 16-bit bank

 

 Amd/Fujitsu Extended Query Table at 0x0040

 

cx2450xflash: CFI does not contain boot bank location. Assuming top.

 

number of CFI chips: 1

 

4 cmdlinepart partitions found on MTD device cx2450xflash

 

Creating 4 MTD partitions on "cx2450xflash":

 

0x000000000000-0x000000060000 : "U-Boot"

 

0x000000060000-0x000000080000 : "Splash"

 

0x000000080000-0x000000480000 : "kernel"

 

0x000000480000-0x000002000000 : "systemFS"

 

arcvmac arcvmac: ARC VMAC at 0x80486580 irq 24 00:c5:5c:00:07:42

 

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

 

cx2450x-ehci cx2450x-ehci.0: Trident CX2450X EHCI USB-Controller

 

cx2450x-ehci cx2450x-ehci.0: new USB bus registered, assigned bus number 1

 

cx2450x-ehci cx2450x-ehci.0: irq 13, io mem 0xe8000100

 

cx2450x-ehci cx2450x-ehci.0: USB 0.0 started, EHCI 1.00

 

usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

 

usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

 

usb usb1: Product: Trident CX2450X EHCI USB-Controller

 

usb usb1: Manufacturer: Linux 2.6.34.13-nevis ehci_hcd

 

usb usb1: SerialNumber: cx2450x-ehci.0

 

hub 1-0:1.0: USB hub found

 

hub 1-0:1.0: 1 port detected

 

cx2450x-ehci cx2450x-ehci.1: Trident CX2450X EHCI USB-Controller

 

cx2450x-ehci cx2450x-ehci.1: new USB bus registered, assigned bus number 2

 

cx2450x-ehci cx2450x-ehci.1: irq 17, io mem 0xe8001100

 

cx2450x-ehci cx2450x-ehci.1: USB 0.0 started, EHCI 1.00

 

usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

 

usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

 

usb usb2: Product: Trident CX2450X EHCI USB-Controller

 

usb usb2: Manufacturer: Linux 2.6.34.13-nevis ehci_hcd

 

usb usb2: SerialNumber: cx2450x-ehci.1

 

hub 2-0:1.0: USB hub found

 

hub 2-0:1.0: 1 port detected

 

Initializing USB Mass Storage driver...

 

usbcore: registered new interface driver usb-storage

 

USB Mass Storage support registered.

 

mice: PS/2 mouse device common for all mice

 

i2c /dev entries driver

 

usbcore: registered new interface driver usbkbd

 

usbkbd: :USB HID Boot Protocol keyboard driver

 

usbcore: registered new interface driver usbmouse

 

usbmouse: v1.6:USB HID Boot Protocol mouse driver

 

ALSA device list:

 

  No soundcards found.

 

TCP cubic registered

 

NET: Registered protocol family 17

 

NET: Registered protocol family 15

 

VFS: Mounted root (jffs2 filesystem) on device 31:3.

 

Freeing init memory: 108K

 

 

init started: BusyBox v1.22.1 (2014-10-28 14:13:28 CET)

running /sbin/mknodes

rootdir=/dev

table=<stdin>

makedevs: line 16: can't create node console: File exists

done /sbin/mknodes

starting /etc/init.d/S00loadmodules ...

cs_frontpanel: module license 'Proprietary' taints kernel.

 

Disabling lock debugging due to kernel taint

 

Frontpanel driver v0.12.0 (Jan 23 2014, 14:39:28) © Coolstream International Limited

 

[1;33mFrontpanel: wakeup source ff time hi ff lo ff

 

[0m

 

Slow work thread pool: Starting up

 

Slow work thread pool: Ready

 

fuse init (API version 7.13)

 

usbcore: registered new interface driver usbserial

 

usbserial: USB Serial Driver core

 

USB Serial support registered for pl2303

 

usbcore: registered new interface driver pl2303

 

pl2303: Prolific PL2303 USB to serial adaptor driver

 

USB Serial support registered for FTDI USB Serial Device

 

usbcore: registered new interface driver ftdi_sio

 

ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver

 

CX2450x I2C-bus driver version 0.3b (Oct  8 2013, 14:34:47) © Coolstream International Limited

 

Memory configured as 2 banks

 

KAL over-allocation map ('x' = kernel, 'C' = cnxt):

 

 

<6>-------    0 ------------- to  ------------  256 ---------------

 

ooooooooooooooooCCooCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC

 

<6>CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC

 

<6>CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC

 

<6>CCCCCCCxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

 

<6>-------  256 ------------- to  ------------  512 ---------------

 

CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCxxxxx

 

<6>xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxoooooooooooo

 

<6>................................................................

 

<6>................................................................

 

 

. = no RAM present

 

C = Conexant KAL

 

o = unutilized or Kernel RAM

 

 

KAL: Starting the KAL...

 

KAL Bank[0] cached    @ V:0x81000000 == P:0x01000000, 2048 KB

 

KAL Bank[0] uncached  @ V:0x86800000 == P:0x06800000, 97280 KB

 

KAL Bank[0] content   @ V:0x81400000 == P:0x01400000, 86016 KB

 

KAL Bank[1] cached    @ V:0x00000000 == P:0x00000000, 0 KB

 

KAL Bank[1] uncached  @ V:0x92700000 == P:0x12700000, 20480 KB

 

KAL Bank[1] content   @ V:0x90000000 == P:0x10000000, 39936 KB

 

KAL: Tiled physical region 0x01400000 to 0x06680000 (15)

 

KAL: Tiled physical region 0x10000000 to 0x12580000 (15)

 

KAL: Module loaded 

 

cnxt_base_drv: Initializing Edwards drivers...

 

cnxt_base_drv: Done initializing Edwards drivers.

 

cnxt_base_drv: Module loaded with major device 101

 

grep: /var/tuxbox/config/neutrino.conf: No such file or directory

FB: cnxtfb_init_inst, plane OSD

 

FB: mode 1280x720p-50

 

FB: HD Mode: 1280x720 FrameRate 5

 

SD Mode: 720x576 FrameRate 2

 

[logoview] done with Timeout...

/proc/cnxt_trace_flags created

 

 # alsa_card_CX2450_init Success  8 , 116 

 

cs_tsx_hsdp_set_port_speed: num: 594 denom: 7

 

cs_frontend version 0.6b

 

DVB: registering new adapter (cs_frontend_dvb)

 

stv090x_attach: Trying to attach STV090x demodulator(1) 

 

stv090x_attach: Attaching STV090x demodulator(1) 

 

stv6110_attach: Attaching STV6110 

 

DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...

 

cnxt_sata version 2.3cs

 

scsi0 : cnxt_sata

 

ata1: SATA max UDMA/133 irq 42

 

scsi1 : cnxt_sata

 

ata2: SATA max UDMA/133 irq 35

 

ata1: SATA link down (SStatus 0 SControl 300)

 

ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

 

ata2.00: ATA-8: SAMSUNG HM641JI, 2AJ10003, max UDMA/133

 

ata2.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 0/32)

 

ata2.00: configured for UDMA/133

 

scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HM641JI  2AJ1 PQ: 0 ANSI: 5

 

sd 1:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)

 

sd 1:0:0:0: Attached scsi generic sg0 type 0

 

sd 1:0:0:0: [sda] Write Protect is off

 

sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

 

 sda: sda1

 

sd 1:0:0:0: [sda] Attached SCSI disk

 

starting /etc/init.d/S01mount ...

starting /etc/init.d/S50hostname ...

starting /etc/init.d/S51networking ...

Configuring network interfaces... vmac_mii_bus: probed

 

arcvmac arcvmac: PHY driver [Generic PHY] (mii_bus:phy_addr=0:09, irq=-1)

 

EXT2-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended

 

Starting wlan0

Failed to connect to wpa_supplicant - wpa_ctrl_open: Success

Could not read interface wlan0 flags: No such device

Failed to initialize driver interface

PHY: 0:09 - Link is Down

 

ip: SIOCGIFFLAGS: No such device

Starting ifplugd... Sat Jan  1 00:00:00 CET 2000

done.

starting /etc/init.d/S52syslogd ...

Jan  1 00:00:00 coolstream syslog.info syslogd started: BusyBox v1.22.1

starting /etc/init.d/S60autofs ...

starting the automounter...

starting /etc/init.d/S90inetd ...

starting /etc/init.d/S96nfsd ...

starting /etc/init.d/S99samba ...

starting /etc/init.d/S9A_rescue ...

Jan  1 00:00:05 coolstream daemon.crit automount[591]: failed to mount autofs path /tmp/automount

Jan  1 00:00:05 coolstream daemon.crit automount[591]: /tmp/automount: mount failed!

Name server cannot be used, exiting 1 Jan 00:00:20 ntpdate[583]: name server cannot be used, reason: Temporary failure in name resolution

 

Testmodus: Partition 3 oder Files wuerden jetzt geloescht werden

starting /etc/init.d/S9L_logomask ...

starting /etc/init.d/S9T_tuxcald ...

starting /etc/init.d/S9T_tuxmaild ...

Jan  1 00:00:30 coolstream user.info mdev-mount: drive has partitions sda1, not trying to mount sda

Jan  1 00:00:31 coolstream user.info mdev-mount: /dev/sda1 already mounted - not mounting again

 

Please press Enter to activate this console. /var/plugins/operations camd_init

/var/plugins/operations cardserver_start

/var/plugins/operations camd_start

/var/plugins/operations rezap

[CBasicClient] connect failed.

/tmp/zapit.sock: No such file or directory

Segmentation fault

/var/plugins/operations camd_stop

/var/plugins/operations cardserver_stop

Jan  1 00:00:32 coolstream daemon.info init: starting pid 716, tty '': '/etc/init.d/rcK'

stoping /etc/init.d/K01samba ...

stopping nmbd ...not running

stopping smbd ...not running

stoping /etc/init.d/K40autofs ...

/etc/init.d/K40autofs: line 66: can't open /var/run/automount.pid: no such file

stoping /etc/init.d/K48syslogd ...

Jan  1 00:00:32 coolstream syslog.info syslogd exiting

stoping /etc/init.d/K96nfsd ...

cat: can't open '/tmp/unfsd.pid': No such file or directory

sh: you need to specify whom to kill

killall: portmap: no process killed

killall: unfsd: no process killed

killall: portmap: no process killed

stoping /etc/init.d/K99mount ...

umount: dev busy - remounted read-only

Hard drive(s) found! Stopping...

stopped  /dev/sda

Error trying to open /dev/sdb: No such device or address

stopped  /dev/sdb

Error trying to open /dev/sdc: No such device or address

stopped  /dev/sdc

Error trying to open /dev/sdd: No such device or address

stopped  /dev/sdd

Error trying to open /dev/sde: No such device or address

stopped  /dev/sde

Error trying to open /dev/sdf: No such device or address

stopped  /dev/sdf

Error trying to open /dev/sdg: No such device or address

stopped  /dev/sdg

Error trying to open /dev/sdh: No such device or address

stopped  /dev/sdh

/bin/hdd_umount.sh: cd: line 2: can't cd to /media/

bin

umount: can't umount /media/bin: No such file or directory

dev

umount: can't umount /media/dev: No such file or directory

etc

umount: can't umount /media/etc: No such file or directory

lib

umount: can't umount /media/lib: No such file or directory

mnt

umount: can't umount /media/mnt: No such file or directory

proc

umount: can't umount /media/proc: No such file or directory

root

umount: can't umount /media/root: No such file or directory

sbin

umount: can't umount /media/sbin: No such file or directory

share

umount: can't umount /media/share: No such file or directory

sys

umount: can't umount /media/sys: No such file or directory

tmp

umount: can't umount /media/tmp: No such file or directory

usr

umount: can't umount /media/usr: No such file or directory

var

umount: can't umount /media/var: No such file or directory

 

The system is going down NOW!

 

Sent SIGTERM to all processes

 

Sent SIGKILL to all processes

 

Requesting system halt

FP: Skip RC setup for FP version 0x21

 

sd 1:0:0:0: [sda] Synchronizing SCSI cache

 

sd 1:0:0:0: [sda] Stopping disk

 

System halted.

 

 

bearbeitet von Gandal
Verwende Spoiler-Tag's für große Datenmengen!
Link zu diesem Kommentar
Auf anderen Seiten teilen

 

 

Testmodus: Partition 3 oder Files wuerden jetzt geloescht werden

starting /etc/init.d/S9L_logomask ...

starting /etc/init.d/S9T_tuxcald ...

starting /etc/init.d/S9T_tuxmaild ...

Jan  1 00:00:30 coolstream user.info mdev-mount: drive has partitions sda1, not trying to mount sda

Jan  1 00:00:31 coolstream user.info mdev-mount: /dev/sda1 already mounted - not mounting again

 

Please press Enter to activate this console. /var/plugins/operations camd_init

/var/plugins/operations cardserver_start

/var/plugins/operations camd_start

/var/plugins/operations rezap

[CBasicClient] connect failed.

/tmp/zapit.sock: No such file or directory

Segmentation fault

/var/plugins/operations camd_stop

/var/plugins/operations cardserver_stop

Es schmiert ab beim starten der Cam behaupte ich mal vorsichtig.

Link zu diesem Kommentar
Auf anderen Seiten teilen

  • Wer ist Online   0 Benutzer

    • Keine registrierten Benutzer online.
×
×
  • Neu erstellen...